The Relationship between Bulk Property and Property Distribution in Thin-Wall Injection Molded PP at Different Molecular Weight and Molecular Weight Distribution

Thin-wall injection molded parts have been paid much attention to the lightweight saving from viewpoints of natural resources saving. In the injection molding, skin-core structure can be found in the parts. This skin-core structure affects the property of completed injection molding parts (bulk property) even if in thin-wall injection molding. However, there is a few research about the relationship between bulk property and internal property distribution in the injection molding specimen. In this study, thin-wall injection molded parts of polypropylene (PP) were prepared by 4 different molecular weight and molecular weight distribution to reveal the relationship between bulk property and property distribution. These characteristics were investigated by using tensile test, fracture toughness characterized by Essential Work of Fracture (EWF) method for bulk property and film tensile test by sliced sample for tensile property distribution. The property distribution test results revealed that the highly bulk property sample had thicker highly mechanical property layer on its surface.

Effects of low molecular weight polysaccharide from Sargassum thunbergii against palmitic acid-induced intracellular lipid accumulation in 3T3-L1 adipocyte and HepG2 cells

Low molecular weight polysaccharides can be isolated from Sargassum thunbergii(LMPST)and in vitro experiments were conducted to evaluate the inhibitory effects on lipids.Two natures of LMPST were attained from S.thunbergii and appraised their LMPST on palmitic acid(PA)induced lipid accretion in Hep G2,and 3T3-L1 cells.LMPST treatment lessened lipid deposition and intracellular free fatty acid and triglyceride intensities in PA-treated above mentioned cells.The mechanistic study publicized that LMPST2 significantly suppressed adipogenesis and stimulated the PA-treated 3T3-L1 cells occupied in the lipolysis pathway.Furthermore,in PA-treated Hep G2 cells,the free fatty acid oxidation was significantly increased by LMPST2.Given these constructive properties of LMPST2 from S.thunbergii,is a potential candidate for diminishing the intracellular lipids,and for a therapeutic agent in those conditions.

Effect of Molecular Weight on Thermoelectric Performance of P3HT Analogues with 2-Propoxyethyl Side Chains

By replacing hexyl chains in poly(3-hexylthiophene)(P3HT)with 2-propoxyethyls,four poly(3-(2-propoxyethyl)thiophene)(P3POET)homopolymers with comparable polydispersity indexes(PDI)and regioregularities were prepared herein in addition with step increment of about 7 kDa on numberaverage molecular weight(M_(n))from around 11 to 32 kDa(accordingly denoted as P11k,P18k,P25k,and P32k).When doped in film by FeCl_(3)at the optimized conditions,the maximum power factor(PF_(max))increases greatly from 4.3μW·m^(-1)·K^(-2)for P11k to 8.8μW·m^(-1)·K^(-2)for P18k,and further to 9.7μW·m^(-1)·K^(-2)for P25k,followed by a slight decrease to 9.2μW·m^(-1)·K^(-2)for P32k.The close Seebeck coefficients(S)at PF_(max)are observed in these doped polymer films due to their consistent frontier orbital energy levels and Fermi levels.The main contribution to this PF_(max)evolution thus comes from the corresponding conductivities(σ).Theσvariation of the doped films can be rationally correlated with their microstructure evolution.

Pharmacokinetics of fucoidan and low molecular weight fucoidan from Saccharina japonica after oral administration to mice

The brown seaweed,Sacchairna japonica,has been used in traditional Chinese medicine for over one thousand years.Oral administration of fucoidan or low molecular weight fucoidan(LMWF)from S.japonica could ameliorate kidney dysfunction in chronic kidney diseases and inhibit diabetic vascular complications.In many studies,LMWF was found to be more potent than fucoidan with high molecular weight.However,the pharmacokinetics of LMWF still remains unclear.The purpose of the research is to compare the pharmacokinetics of fucoidan with high molecular weight(136 kDa)with that low molecular weight(9.5 kDa)after oral administration to ICR mice.Since fucose is the main and representative monosaccharide of fucoidans,we evaluate the pharmacokinetics of fucoidan and LMWF by determining the fucose concentration in mice serum.Both fucoidan and LMWF were absorbed following oral administration.Fucoidan and LMWF were provided to mice by oral administration with 60 mg/kg and the maximum Concentration(C_(max))was found at 2.5 h(0.66±0.32 mg/L)for Fucoidan and 1.5 h(1.01±0.56 mg/L)for LMWF,respectively.It seems that LMWF had a higher area under the curve(AUC_(0–t))and was absorbed more quickly than fucoidan.The estimated bioavailability of LMWF was28.3%in the mice treated with a single dose of 30 mg/kg.In addition,LMWF was found widely spreaded into different tissues following oral administration and the highest concentration was found in kidney at 19.93±7.02μg/g.In this study,we first studied the pharmacokinetics of LMWF,in order to help to understand the function of LMWF.And our results shed light on the potential of development of drugs based on LMWF.

Structural characterizations andα-glucosidase inhibitory activities of four Lepidium meyenii polysaccharides with different molecular weights

Four polysaccharides(MCPa,MCPb,MCPc,MCPd)were obtained from Lepidium meyenii Walp.Their structures were characterized by chemical and instrumental methods including total sugar,uronic acid and protein content determi-nation,UV,IR and NMR spectroscopy,as well as monosaccharide composition determination and methylation analy-ses.Four polysaccharides were a group of glucans with different molecular weights ranging from 3.12 to 14.4 kDa,and shared a similar backbone chain consisting of(1→4)-glucose linkages with branches attached to C-3 and C-6.Furthermore,bioactivity assay showed that MCPs had concentration-dependent inhibitory activity onα-glucosidase.MCPb(Mw=10.1 kDa)and MCPc(Mw=5.62 kDa)with moderate molecular weights exhibited higher inhibitory activ-ity compared with MCPa and MCPd.

Purification and immunoglobulin E epitopes identification of low molecular weight glutenin:an allergen in Chinese wheat

As one of the most important cereals,wheat(Triticum aestivum)has high nutritional value and is widely cultivated in China.However,wheat can cause severe allergic reactions,and a growing number of people are developing allergies to Chinese wheat.Low molecular weight glutenin(LMW-GS),an important allergen in susceptible populations,is responsible for celiac disease and wheat contacts dermatitis.In this study,LMW-GS was highly purified from Chinese wheat(Xiaoyan 6)and further identified and characterized.In addition,8 peptides were predicted efficiently by 5 immunological tools,among which 5 peptides showed significant immunoglobulin E binding abilities.Two specific epitopes were found to be in the non-conserved region of the amino acid sequence of LMW-GS,which was speculated to be the specific epitope of Chinese wheat.This systematic research of LMW-GS may provide new insights into the prevention of wheat allergy and development of hypoallergenic wheat products.

Exploring the mechanism of Guizhi decoction’s“Jun-Chen-Zuo-Shi”in treating plant nervous disorders based on weighted network pharmacology and molecular docking techniques

Objective:To explore the mechanism of Guizhi decoction’s“Jun-Chen-Zuo-Shi”in treating plant nervous disorders based on network pharmacology and molecular docking methods.Methods:The main active ingredients of Guizhi decoction were screened from the Traditional Chinese Medicine Systems Pharmacology Database and Analysis Platform(TCMSP),and plant nervous disorder-related targets were screened from the Gene Cards database,OMIM database,and PharmGKB database.The intersection of the two was obtained.The intersection targets were used to draw a protein interaction network and a“Traditional Chinese Medicine-active ingredient-target”network using the STRING database and Cytoscape 3.9.1.The nodes in the“Traditional Chinese Medicine-active ingredient-target”network were weighted according to the“Jun-Chen-Zuo-Shi”principle.Kyoto Encyclopedia of Genes and Genomes,and gene ontology enrichment analysis were performed on the intersection targets.Molecular docking was used to verify the affinity between core targets and key ingredients.Results:A total of 225 effective components of Guizhi decoction were screened,among which 127 components could bind to 160 common targets and play a therapeutic role.The common targets were mainly enriched in 2785 gene ontology entries and 189 Kyoto Encyclopedia of Genes and Genomes pathways.Molecular docking confirmed that core targets could spontaneously bind to key ingredients.Conclusion:The key targets for the treatment of plant nervous disorders by Guizhi decoction are MAPK1,TP53,RB1,STAT3,MAPK3,MAPK14,etc.,which reflect the characteristics of the synergistic mechanism of traditional Chinese medicine with multiple components,targets,and pathways through the regulation of inflammatory signal pathways and oxidative stress processes.

Analysis of Molecular Weight Distribution and Antioxidant Activities of Cirrhinus molitorella Skin Collagen Hydrolysates

[Objective] The aim of this work was to identify molecular weight （MW） distribution and antioxidant activity of fish skin col agen hydrolysates. [Method] The MW distribution of hydrolysates was determined using both size exclusion chromatography and matrix-assisted laser desorption ionization time-of-flight mass spec-trometry （MALDI-TOF-MS）. Fish skin were treated by the alkaline protease 2709. [Result] The optional conditions for hyerolysis were time 3 h, temperature 55 ℃, pH 10.0, substrate concentration 80 g/L and E/S 4%. The results of both methods indi-cated that the molecular weight of col agen hydrolysates was from 400 to 1 800 Da, and the peptides’ molecular weight was less than 1 400 Da mostly. The reducing power and antioxidant/radical scavenging activity [1, 1-diphenyl-2-picryl-hydrazyl （DPPH） free radical scavenging activity] were determined. [Conclusion] The results reveal that the fishskin hydrolysate is a potential source of antioxidants.

Effect of Molecular Weight and Molecular Distribution on Skin Structure and Shear Strength Distribution near the Surface of Thin-Wall Injection Molded Polypropylene

In this study, the relationship between skin structure and shear strength distribution of thin-wall injection molded polypropylene (PP) molded at different molecular weight and molecular distribution was investigated. Skin-core structure, cross-sectional morphology, crystallinity, crystal orientation, crystal morphology and molecular orientation were evaluated by using polarized optical microscope, differential scanning calorimeter, X-ray spectroscopic analyzer and laser Raman spectroscopy, respectively, while the shear strength distribution was investigated using a micro cutting method called SAICAS (Surface And Interfacial Cutting Analysis System). The results indicated that the difference of molecular weight and molecular weight distribution showed own skin layer thickness. Especially, high molecular weight sample showed thicker layer of the lamellar orientation and molecular orientation than low molecular weight sample. In addition, wide molecular distribution sample showed large crystal orientation layer.

Study on Enzymatic Hydrolysis of Gadus morrhua Skin Collagen and Molecular Weight Distribution of Hydrolysates

Process parameters on enzymatic hydrolysis and molecular weight （MW） distribution of collagen hydrolysates from Gadus morrhua skin were investigated. The optimal process parameters were obtained by the single-factor and orthogonal experiments. The molecular weight distribution of hydrolysates was determined using both Sephadex G25 partition and high speed liquid chromatography electricity spray mass spectrum （HPLC-ESI-MS）. Collagen hydrolysates were first gained by an alkaline protease ＂alcalase＂ for 3 h at temperature （50~C）, pH （10.0）, substrate concentration （75 g L-~）, and E/S （3%）. The molecular weight distribution of collagen hydrolysates ranged from 300 to 1 500 Da, and most of peptides were under 1 200 Da. Sephadex G25 partition and HPLC-ESI-MS should be successfully employed to determine the molecular weight distribution of collagen hydrolysates.

A HIGHLY ACTIVE NEODYMIUM CHLORIDE ISOPROPANOL COMPLEX/MODIFIED METHYLALUMINOXANE CATALYST FOR PREPARING POLYISOPRENE WITH HIGH CIS-1,4 STEREOSPECIFICITY AND NARROW MOLECULAR WEIGHT DISTRIBUTION

Neodymium chloride isopropanol complex （NdCl3.3＇prOH） activated by modified methylaluminoxane （MMAO） was examined in isoprene polymerization in hexane, with regards to Nd compounds, aluminum （Al） compounds, [Al]/[Nd] ratio, polymerization temperature and time. NdCl3＇3iprOH exhibited high activity producing polymers feasting high cis-l,4 stereospecificity （〉 96%）, very high molecular weight （Mn 〉 1.0 × 10^6） and fairly narrow molecular weight distribution （MWD, Mw/Mn 〈 2.0） simultaneously. In comparison, neodymium isopropoxide also showed high activity providing polymers with narrow MWD （Mw/Mn = 2.07）, but somewhat low cis-1,4 content （ca. 92%）, while neodymium chloride had no activity under present polymerization conditions. The Al compounds affected the polymer yield in the order of Al（i-Bu）3 〉 MMAO 〉 Al（i-Bu）2H. MMAO as cocatalyst afforded polyisoprene with high Mn over 1.0 × 10^6, whereas as stronger chain transfer agent than MMAO, AI（i-Bu）3 and AI（i-Bu）EH yielded polymers with low Mn （1.0 × 10^5-8.0 × 10^5）. NdCl3·3＇PrOH/MMAO catalyst showed a fairly good catalytic activity even at relatively low [Al]/[Nd] ratio of 30, and the produced polymer remained high cis-1,4 content of 95.8% along with high Mn over 1.0× 10^6 even at elevated temperatures up to 70℃. The polymerization rate is of the first order with respect to the concentration of isoprene. The mechanism of active species formation was discussed preliminarily.

Molecular Weight Distribution of Dissolved Organic Matter in Lake Hongfeng Determined by High Performance Size Exclusion Chromatography (HPSEC) With On-Line UV-Vis Absorbance and Fluorescence Detection

The molecular weight distribution (MWD) of dissolved organic matter (DOM) in lake waters from Lake Hongfeng was examined using high performance size exclusion chromatography (HPSEC) with UV-vis absorbance and fluorescence detection. The elution curves obtained by absorbance and fluorescence techniques expressed similar patterns, with the exception of diminishing of large fraction and the peaks behind several seconds in fluorescence chromatograms. According to its molecular weight (MW), DOM in water samples is divided into several fractions: large ({>3.5} kDa); medium-large ({3.5}-{2.0} kDa); medium ({2.0}-{1.0} kDa) and small ({<1.0} kDa). The average molecular weight was calculated using the elution curve detected by UV-vis absorbance and fluorescence detection techniques. The results showed that the weight-average molecular weight (Mw) and number-average molecular weight (Mn) calculated by UV-vis absorbance techniques range from 1750 to 2050 Dalton and from 1450 to 1850 Dalton, respectively. And the Mw and Mn obtained by fluorescence detection are lower by 50 to 400 Dalton. As a reference, the molecular weight of Fluka humic acid (FHA) is larger than that of water samples by about 200 Dalton. The average molecular weight of DOM for water samples collected in March and July was compared. The results revealed that the molecular weight is lower for water samples obtained in July than that obtained in March, indicating the ambient environment has an influence on the molecular weight, including photo-degradation and biological activity.

Characteristics and distribution of low molecular weight organic acids in the sediment porewaters in Bosten Lake, China

The composition and vertical profiles of low molecular-weight organic acids （LMWOAs） and the contribution of them to dissolved organic matter （DOM） in sediment porewaters in Bosten Lake, Xinjiang, China were investigated. The results showed that total concentration of LMWOAs was up to 94.5 μmol/L and their proportion in DOM was 5.6%, suggesting that LMWOAs were important chemical components in DOM in lake sediment porewaters. Among the seven LMWOAs, pyruvic and acetic acid had the highest concentrations with 26.30 and 8.31 μmol/L, accounting for 51.4% and 14.92% of LMWOAs, respectively. Trifluoroacetic and sorbic acid had the lowest concentrations, indicating that the compositions of LMWOAs in relative reducing environments were largely different from those reported in glacier, atmosphere and soils. The concentrations of lactic, acetic, formic, sorbic and oxalic acid decreased with increasing depth, probably relating to stronger microbial activities in the initial stage of early diagenesis. Trifluoroacetic acid was mainly anthropogenic with its concentration, showing a diusive trend from the surface to bottom sediments. The concentrations of lactic acid and nitrate generally showed a consistent profile. The increasing concentration of pyruvic acid in the vertical profile was just opposite to that of sulfate, revealing a significant negative relationship between them. Oxalic acid remained constant except for an obvious peak at 6 cm depth. The results indicated the diversities in sources and behaviors for various LMWOAs during early diagenesis in sediments.

SUPPORTED ZIEGLER-NATTA CATALYSTS FOR ETHYLENE SLURRY POLYMERIZATION AND CONTROL OF MOLECULAR WEIGHT DISTRIBUTION OF POLYETHYLENE

The effect of chemical composition of highly active supported Ziegler-Natta catalysts with controlled morphology on the MWD of PE has been studied.It was shown the variation of transition metal compound in the MgCl_2-supported catalyst affect of MWD of PE produced in broad range:Vanadium-magnesium catalyst(VMC)produce PE with broad and bimodal MWD(M_w/M_n=14-21).MWD of PE,produced over titanium-magnesium catalyst(TMC)is narrow or medium depending on Ti content in the catalyst(M_w/M_n=3.1-4.8).The oxidation ...

Molecular Weight and Distribution of Cellulose and Cellulose Microspheres

[ Objective ] This study aimed to provide basic data for studying the relationship between structure and property of cellulose microspheres by measuring molecular weight of cellulose and cellulose microspheres with viscosity method and gel permeation chromatography （GPC） method. [ Method] In viscosity method, cadmium ethylenediamine was used as the solvent, intrinsic viscosity η of the solution was determined at 25 ℃ by using a Ubbelohde viscometer, to calculate the molecular weight of cellulose; in GPC method, 8% LiC1 / N, N-dimethylacetamide （LiC1/DMAc） was used as the solvent and 0.5% LiC1/DMAc was used as the mobile phase to determine the relative molecular weight and distribution of cellulose and cellulose microspheres. In addition, the determination results were analyzed to compare these two methods. [ Result ] Viscosity-average molecular weight Mr/ of cellulose and cellulose microspheres determined with viscosity method were 224,532 and 16,686, respectively; weight-average molecular weight Mw of cellulose and cellulose microspheres determined with GPC method were 284,196 and 22,345, respectively. [ Conclusion] The determination results of （;PC method are relatively close to the actual value and could truly reflect the characteristics of molecular weialat distribution of eellulose and cellulose mierosr, heres.

RHEOLOGICAL BEHAVIOR OF POLYMER MELTS (Ⅱ) MULTIPLE ENTANGLEMENT MODEL FOR PREDICTING THE DEPENDENCE OF VISCOELASTIC BEHAVIOR ON DEFORMATION STATE AND PRIMARY MOLECULAR WEIGHTS AND THEIR DISTRIBUTION

In accordance with the memory function of Gaussian chain constraints in entangled polymermelts a set of material functions related to a certain"test flow"are formulated from the O-W-Ftype constitutive equation by the appropriate selection of the Cauchy-Green and Finger tensors.Thedependences of these material functions on the strain rate and the dependences of the linearviscoelastic functions on the primary molecular weight distribution and the entanglement sites sequencedistribution on polymer chain are derived from a multiple-entanglement model and a couple of mech-anisms of relaxation for the loop and terminal entanglement sites.When the primary polymer chainsare modelled with the Lansing-Kraemer molecular distribution function,a set of new relationshipsamong linear viscoelastic functions(η0,ψ100,ηext0 and τ1)and the molecular weights and their distributionare formulated.These functions and relationships are verified with experimental data.

Lumped Time Distribution Function of Dynamic Equilibrium System and Its Application in Calculating Molecular Weight Distribution of Polymer

The lumped time distribution functions were proposed, which can be used for describing the dynamicsystems with two or more than two states of the end of growing polymer chain during chain addition polymerization.Numerical analysis of the lumped time distribution functions was carried out. The method for calculating molecularweight distribution of polymer in the stable free radical polymerization and more general cases was developed basedon the lumped time distribution functions.

Biosynthesis of poly-3-hydroxybutyrate with a high molecular weight by methanotroph from methane and methanol

Poly-3-hydroxybutyrate （PHB） can be produced by various species of bacteria. Among the possible carbon sources, both methane and methanol could be a suitable substrate for the production of PHB. Methane is cheap and plentiful not only as natural gas, but also as biogas. Methanol can also maintain methanotrophic activity in some conditions. The methanotrophic strain Methylosinus trichosporium IMV3011 can accumulate PHB with methane and methanol in a brief nonsterile process. Liquid methanol （0.1%） was added to improve the oxidization of methane. The studies were carried out using shake flasks. Cultivation was performed in two stages： a continuous growth phase and a PHB accumulation phase under the conditions short of essential nutrients （ammonium, nitrate, phosphorus, copper, iron （Ⅲ）, magnesium or ethylenediamine tetraacetate （EDTA）） in batch culture. It was found that the most suitable growth time for the cell is 144 h. Then an optimized culture condition for second stage was determined, in which the PHB concentration could be much increased to 0.6 g/L. In order to increase PHB content, citric acid was added as an inhibitor of tricarboxylic acid cycle （TCA）. It was found that citric acid is favorable for the PHB accumulation, and the PHB yield was increased to 40% （w/w） from the initial yield of 12% （w/w） after nutrient deficiency cultivation. The PHB produced is of very high quality with molecular weight up to 1.5 × 10^6Da.

Efficacy and Safety of Low Molecular Weight Heparin Prophylaxis for Venous Thromboembolism Following Lumbar Decompression Surgery

Objective To evaluate the efficacy and safety of low molecular weight heparin (LMWH) prophylaxis for venous thromboembolism (VTE) after lumbar decompression surgery. Methods Patients at high or the highest risk of VTE who underwent lumbar spine surgery in Peking Union Medical College Hospital from January 2004 to April 2011 were included in the present study. All the patients received a half dose of LMWH 6 hours after surgery followed by a full dose LMWH once per day until discharge. We recorded incidences of deep venous thrombosis (DVT), pulmonary embolism (PE), bleeding complications, and medication side effects. Results Seventy-eight consecutive patients were eligible and enrolled in this study. The mean hospital stat was 8.5±4.5 days. No symptomatic DVT, PE, or major bleeding events were observed. One patient developed wound ecchymosis, another developed wound bleeding, four had mild hepatic aminotransferase level elevation, and one developed a suspicious allergic reaction. Conclusion LMWH may be applied as an effective and safe prophylaxis for VTE in high-risk patients undergoing lumbar decompression surgery.

STRUCTURE,MOLECULAR WEIGHT AND BIOACTIVITIES OF(1→3)-β-D-GLUCANS AND ITS SULFATED DERIVATIVES FROM FOUR KINDS OF LENTINUS EDODES

Lentinan samples,(1→3)-β-D-glucans containing 4.6-15.2 wt% proteins,coded as L-I_1 L-I_2 L-I_3 and L-I_4(L-I)were isolated from four kinds of Lentinus edodes.These glucans were treated with acetone to remove the protein in orderto obtain free protein glucans coded as LNP-I_1,LNP-I_2.LNP-I_3 and LNP-I_4(LNP-I).The free-protein polysaccharideswere sulfated to give derivatives(S-LNP-I)with degree of substitution(DS)from 0.4-0.8.The structural features andweight-average molecular weight(M_w)of the samples were investigated by using infrared spectroscopy,elemental analysis,^(13)C-NMR,size exclusion chromatography combined with laser light scattering(SEC-LLS)and viscometry.The effects ofstructure and conformation of the polysaccharides on antitumor activities were assayed in vivo(Sarcoma 180 solid tumors)and in vitro(Sarcoma 180,HL-60,MCF-7 and Vero tumors).The results indicated that the predominant species of thesamples L-I and LNP-I in 0.2 mol/L NaCl aqueous solution existed as triple-helical chains with high rigidity and in dimethylsulfoxide(DMSO)as single-flexible chains.Interestingly,the antitumor activities of LNP-I are lower than those of the nativeglucans(L-I),whereas their sulfated derivatives have higher inhibition ratio against Sarcoma 180 than LNP-I.The resultsreveal that the binding of protein,sulfated modification and the triple helix conformation are important factors in theenhancement of the antitumor activities of polysaccharides on the whole.