Al-Mn alloy coatings were electrodeposited on an iron substrate from AlCl3-NaCl-KCl molten salts with anhydrous MnCl2 enhanced by the addition of CeCl3. The microstructure and properties of the Al-Mn alloy coatings we...Al-Mn alloy coatings were electrodeposited on an iron substrate from AlCl3-NaCl-KCl molten salts with anhydrous MnCl2 enhanced by the addition of CeCl3. The microstructure and properties of the Al-Mn alloy coatings were investigated, and scanning electron microscopy, X-ray diffraction, and polarization curves were used to determine the composition, surface morphology, phase structure, and corrosion resistance of the obtained deposits. The results showed that the surface coatings were smooth, and that the crystallites were dense and uniform when 0.22 wt.% CeCl3 was added to the molten salt. An amorphous mixture of Al and Al6Mn was obtained. CeCl3 enhanced the corrosion resistance and increased the hardness of the single amorphous phase alloys. The pitting potential of the coating was approximately -1.1239 V, and its hardness was 390 kgf/mm2.展开更多
Herein we report a systematical investigation on the promoting effect of the carbon chain length of the intercalated carboxylic anions on the COcapture performance of Mg-Al layer double hydroxides（LDHs）.A series of ...Herein we report a systematical investigation on the promoting effect of the carbon chain length of the intercalated carboxylic anions on the COcapture performance of Mg-Al layer double hydroxides（LDHs）.A series of organo-LDHs were successfully synthesized via co-precipitation and calcination-rehydration methods. All as-prepared samples were characterized by many techniques including XRD, ATR-FTIR, BET,and TGA. The XRD and ATR-FTIR studies indicated that organic anions were successfully intercalated into LDHs. The influence of some important parameters such as calcination temperature, adsorption temperature, and coating with（Li-Na-K）NOmolten salt was investigated. The results exhibited that when the number of carbon is greater than 10, the COcapture capacity steadily increased with the increase in carbon number. After coating with 55 mol%（Li-Na-K）NOmolten salt, the COuptake of LDH-C16 sample with high Mg/Al ratios can be increased up to 3.25 mmol/g. The COadsorption/desorption cycling stability was also studied using temperature swing adsorption, which showed a stable COcapture performance even after 22 cycles. Considering its high COcapture capacity and good cycling stability, this novel COadsorbent is very promising in the sorption-enhanced water gas shift（SEWGS） processes.展开更多
基金Project supported by the National Natural Science Foundation of China (51054003, 50374045)Shandong Province Natural Science Foundation (Y2007F60, ZR2011BL005)+1 种基金Shandong Province High Education Science Technology Program (J09LB59)Shandong Province Mid-life-Youth Scientists Research Encouraging Foundation (BS2009NJ007)
文摘Al-Mn alloy coatings were electrodeposited on an iron substrate from AlCl3-NaCl-KCl molten salts with anhydrous MnCl2 enhanced by the addition of CeCl3. The microstructure and properties of the Al-Mn alloy coatings were investigated, and scanning electron microscopy, X-ray diffraction, and polarization curves were used to determine the composition, surface morphology, phase structure, and corrosion resistance of the obtained deposits. The results showed that the surface coatings were smooth, and that the crystallites were dense and uniform when 0.22 wt.% CeCl3 was added to the molten salt. An amorphous mixture of Al and Al6Mn was obtained. CeCl3 enhanced the corrosion resistance and increased the hardness of the single amorphous phase alloys. The pitting potential of the coating was approximately -1.1239 V, and its hardness was 390 kgf/mm2.
基金supported by the Fundamental Research Funds for the Central Universities (2016ZCQ03)Beijing Excellent Young Scholar (2015000026833ZK11)+1 种基金the National Natural Science Foundation of China (51622801,51572029,and 51308045)the Xu Guangqi Grant
文摘Herein we report a systematical investigation on the promoting effect of the carbon chain length of the intercalated carboxylic anions on the COcapture performance of Mg-Al layer double hydroxides（LDHs）.A series of organo-LDHs were successfully synthesized via co-precipitation and calcination-rehydration methods. All as-prepared samples were characterized by many techniques including XRD, ATR-FTIR, BET,and TGA. The XRD and ATR-FTIR studies indicated that organic anions were successfully intercalated into LDHs. The influence of some important parameters such as calcination temperature, adsorption temperature, and coating with（Li-Na-K）NOmolten salt was investigated. The results exhibited that when the number of carbon is greater than 10, the COcapture capacity steadily increased with the increase in carbon number. After coating with 55 mol%（Li-Na-K）NOmolten salt, the COuptake of LDH-C16 sample with high Mg/Al ratios can be increased up to 3.25 mmol/g. The COadsorption/desorption cycling stability was also studied using temperature swing adsorption, which showed a stable COcapture performance even after 22 cycles. Considering its high COcapture capacity and good cycling stability, this novel COadsorbent is very promising in the sorption-enhanced water gas shift（SEWGS） processes.
