Aerosol flotation of low-grade refractory molybdenum ores

The characteristics of aerosol flotation, which include the effect of the concentration and particle size of kerosene aerosol on the molybdenum （Mo） flotation index and the effect of kerosene aerosol dosing method on the kerosene dosage and flotation time, were studied in the flotation of low-grade refractory molybdenum ores using kerosene aerosol. The results revealed that the particle size and concentration of kerosene aerosol had little effect on the Mo grade but had significant effect on the Mo recovery. A smaller particle size and a lower con-centration of kerosene aerosol were beneficial to the Mo aerosol flotation. For the received Mo ore samples, the optimized particle size of kerosene aerosol was 0.3-2 μm and the optimized aerosol concentration was 14 mg/L. The compressed air atomizer had a more uniform dis-tribution of aerosol particles than the ultrasonic atomizer, and the aerosol concentration was controlled easily, so the compressed air atomizer was more suitable for the research of aerosol flotation. Compared with conventional flotation in which kerosene was directly added into the ore pulp, the flotation time was reduced by ~30%, and the dosage was decreased by ~20% in aerosol flotation, while the Mo flotation index was similar.

Flotation technology of refractory low-grade molybdenum ore

Because of the low grade, high oxidation rate and the accumulation of little associated metal sulfide ore in the molybdenum concentrate during flotation, the Qingyang molybdenum ore is difficult to beneficiate. The experimental studies of grinding fineness, the amount of roughing modifier, depressant and collector were completed. In the cleaning process, the contrast experiments of one regrinding, the regrinding and scrubbing, two-stage regrinding was carried. The result shows that the grade of molybdenum ore concentrate is 45.31%, the recovery is 65.98% and the rich ore ratio reaches 20.59% by the regrinding and scrubbing seven cleaning, the regrinding of concentrations from middling of molybdenum-sulfur separation. The regularly-concentrated material from the apparatus was as the middling products. Hence, ideal beneficiation index can be obtained with a rational mineral processing, which offers new beneficiating technology for the refractory low-grade molybdenum ore in China.

Extraction of Tungsten and Molybdenum by Various Organic Compounds as Extractants

Seventy organic compounds including various organophosphorus esters, amines and oxygen-based ligands were investigated as extractants. The experiment results show that amines are excellent extractants for W and Mo. Their sequence of extraction ability for W is as follows: quarternary amine > tertiary amine > secondary amine > primary amine. Acidic organophosphorus extractants do not extract W, but can extract Mo with high extraction ability from the acidic solution. These extractants could provide a potential process for separating W from Mo.

Superior lithium storage performance in MoO_(3) by synergistic effects:Oxygen vacancies and nanostructures

Molybdenum trioxide(MoO_(3))has recently attracted wide attention as a typical conversion-type anode of Li-ion batteries(LIBs).Nevertheless,the inferior intrinsic conductivity and rapid capacity fading during charge/discharge process seriously limit large-scale commercial application of MoO_(3).Herein,the density function theory(DFT)calculations show that electron-proton co-doping preferentially bonds symmetric oxygen to form unstable HxMoO_(3).When the-OH-group in HxMoO_(3) is released into the solution in the form of H_(2)O,it is going to form MoO_(3-x)with lower binding energy.By the means of both electron-proton co-doping and high-energy nanosizing,oxygen vacancies and nanoflower structure are introduced into MoO_(3) to accelerate the ion and electronic diffusion/transport kinetics.Benefitting from the promotion of ion diffusion kinetics related to nanostructures,as well as both the augmentation of active sites and the improvement of electrical conductivity induced by oxygen vacancies,the MoO_(3-x)/nanoflower structures show excellent lithium-ion storage performance.The prepared specimen has a high lithium-ion storage capacity of 1261 mA h g^(-1)at 0.1 A g^(-1)and cyclic stability(450 cycle),remarkably higher than those of previously reported MoO_(3)-based anode materials.