APPLICATION OF THE MOMENT METHODS TO ANALYSIS OF X-RAY DIFFRACTION LINE PROFILE FOR PA1010-BMI SYSTEM

Pure X-ray diffraction profiles have been analysed for polyamide 1010 and PA1O1O-BMI system by means of multipeak fitting resolution of X-ray diffraction. The methods of variance and fourth moment have been applied to determine the particle size and strain values for the paracrystalline materials. The results indicated that both variance and fourth moment of X-ray diffraction line profile yielded approximately the same values of the particle size and the strain. The particle sizes of (100) reflection have been found to decrease with increasing BMI content, whereas the strain values increased.

Sensitivity Analysis of Electromagnetic Scattering from Dielectric Targets with Polynomial Chaos Expansion and Method of Moments

In this paper,an adaptive polynomial chaos expansion method(PCE)based on the method of moments(MoM)is proposed to construct surrogate models for electromagnetic scattering and further sensitivity analysis.The MoM is applied to accurately solve the electric field integral equation(EFIE)of electromagnetic scattering from homogeneous dielectric targets.Within the bistatic radar cross section(RCS)as the research object,the adaptive PCE algorithm is devoted to selecting the appropriate order to construct the multivariate surrogate model.The corresponding sensitivity results are given by the further derivative operation,which is compared with those of the finite difference method(FDM).Several examples are provided to demonstrate the effectiveness of the proposed algorithm for sensitivity analysis of electromagnetic scattering from homogeneous dielectric targets.

An Uncertainty Analysis and Reliability-Based Multidisciplinary Design Optimization Method Using Fourth-Moment Saddlepoint Approximation

In uncertainty analysis and reliability-based multidisciplinary design and optimization(RBMDO)of engineering structures,the saddlepoint approximation(SA)method can be utilized to enhance the accuracy and efficiency of reliability evaluation.However,the random variables involved in SA should be easy to handle.Additionally,the corresponding saddlepoint equation should not be complicated.Both of them limit the application of SA for engineering problems.The moment method can construct an approximate cumulative distribution function of the performance function based on the first few statistical moments.However,the traditional moment matching method is not very accurate generally.In order to take advantage of the SA method and the moment matching method to enhance the efficiency of design and optimization,a fourth-moment saddlepoint approximation(FMSA)method is introduced into RBMDO.In FMSA,the approximate cumulative generating functions are constructed based on the first four moments of the limit state function.The probability density function and cumulative distribution function are estimated based on this approximate cumulative generating function.Furthermore,the FMSA method is introduced and combined into RBMDO within the framework of sequence optimization and reliability assessment,which is based on the performance measure approach strategy.Two engineering examples are introduced to verify the effectiveness of proposed method.

Anti-plane deformations around arbitrary-shaped canyons on a wedge-shape half-space:moment method solutions

The wave propagation behavior in an elastic wedge-shaped medium with an arbitrary shaped cylindrical canyon at its vertex has been studied.Numerical computation of the wave displacement field is carried out on and near the canyon surfaces using weighted-residuals(moment method).The wave displacement fields are computed by the residual method for the cases of elliptic,circular,rounded-rectangular and flat-elliptic canyons,The analysis demonstrates that the resulting surface displacement depends,as in similar previous analyses,on several factors including,but not limited,to the angle of the wedge,the geometry of the vertex,the frequencies of the incident waves,the angles of incidence,and the material properties of the media.The analysis provides intriguing results that help to explain geophysical observations regarding the amplification of seismic energy as a function of site conditions.

Quadrature Method of Moments for Nanoparticle Coagulation and Diffusion in the Planar Impinging Jet Flow

A computational model combining large .eddy simulation with quadrature moment method was em-ployed to study nanoparticle evolution in a confined impinging jet. The investigated particle size is limited in the transient regime, and the particle collision kernel was obtained by using the theory of flux matching. The simulation was validated by comparing it with the experimental results. The numerical results show coherent structure acts to dominate particle number intensity, size and polydispersity distributions, and it also induce particle-laden iet to be diluted by .the ambient.The evolution of particle dynarnics in.the impinging jet flow are strongly related to the Rey-nolds number and nozzle-to-plate distance, and their relationships were analyzed.

Nanoparticle Transport and Coagulation in Bends of Circular Cross Section via a New Moment Method

Transport of nanoparticles and coagulation is simulated with the combination of CFD in a circular bend. The Taylor-expansion moment method(TEMOM)is employed to study dynamics of nanoparticles with Brownian motion,based on the flow field from numerical simulation.A fully developed flow pattern in the present simulation is compared with previous numerical results for validating the model and computational code.It is found that for the simulated particulate flow system,the particle mass concentration,number concentration,particle polydispersity, mean particle diameter and geometric standard deviation over cross-section increase with time.The distribution of particle mass concentration at different time is independent of the initial particle size.More particles are concen-trated at outer edge of the bend.Coagulation plays more important role at initial stage than that in the subsequent period.The increase of Reynolds number and initial particle size leads to the increase of particle number concentration.The particle polydispersity,mean particle diameter and geometric standard deviation increase with decreasing Reynolds number and initial particle size.

Series expansion feasibility of singular integral in method of moments

When calculating electromagnetic scattering using method of moments （MoM）, integral of the singular term has a significant influence on the results. This paper transforms the singular surface integral to the contour integral. The integrand is expanded to Taylor series and the integral results in a closed form. The cut-off error is analyzed to show that the series converges fast and only about 2 terms can agree wel with the accurate result. The comparison of the perfect electric conductive （PEC） sphere＇s bi-static radar cross section （RCS） using MoM and the accurate method validates the feasibility in manipulating the singularity. The error due to the facet size and the cut-off terms of the series are analyzed in examples.

Nanoparticle coagulation in a planar jet via moment method

Large eddy simulations of nanoparticle coagulation in an incompressible planar jet were performed. The particle is described using a moment method to approximate the particle general dynarnics equations. The time-averaged results based on 3000 time steps for every case were obtained to explore the influence of the Schmidt number and the Damkohler number on the nanoparticle dynamics. The results show that the changes of Schmidt number have the influence on the number concentration of nanoparticles only when the particle diameter is less than 1 nm for the fixed gas parameters. The number concentration of particles for small particles decreases more rapidly along the flow direction, and the nanoparticles with larger Schmidt number have a narrower distribution along the transverse direction. The smaller nanoparticles Coagulate and disperse easily, grow rapidly hence show a stronger polydispersity. The smaller coagulation time scale can enhance the particle collision and coagulation. Frequented collision and coagulation bring a great increase in particle size. The larger the Damkohler number is, the higher the particle polydispersity is.

An analysis of the radar backscatter from oil-covered sea surfaces using moment method and Monte-Carlo simulation: preliminary results

An analysis of the radar backscattering from the ocean surface covered by oil spill is presented using a mi- crowave scattering model and Monte-Carlo simulation. In the analysis, a one-dimensional rough sea sur- face is numerically generated with an ocean waveheight spectrum for a given wind velocity. A two-layered medium is then generated by adding a thin oil layer on the simulated rough sea surface. The electric fields backscattered from the sea surface with two-layered medium are computed with the method of moments （MoM）, and the backscattering coefficients are statistically obtained with N independent samples for each oil-spilled surface using the Monte-Carlo technique for various conditions of surface roughness, oil-layer thickness, frequency, polarization and incidence angle. The numerical simulation results are compared with theoretical models for clean sea surfaces and SAR images of an off-spilled sea surface caused by the Hebei （Hebei province, China） Spirit oil tanker in 2007. Further, conditions for better oil spill extraction are sought by the numerical simulation on the effects of wind speed and oil-layer thickness at different inci- dence angles on the backscattering coefficients.

Simulation of the Brownian coagulation of nanoparticles with initial bimodal size distribution via moment method

The Brownian coagulation of nanoparticles with initial bimodal size distribution, i.e., mode i and j, is numerically studied using the moment method. Evolutions of particle number concentration, geometric average diameter and geometric standard deviation are given in the free molecular regime, the continuum regime, the free molecular regime and transition regime, the free molecular regime and continuum regime, respectively. The results show that, both in the free molecular regime and the continuum regime, the num- ber concentration of mode i and j decreases with increasing time. The evolutions of particle geometric average diameter with different initial size distribution are quite different. Both intra-modal and inter-modal coagulation finally make the polydispersed size distribution become monodispersed. As time goes by, the size distribution with initial bimodal turns to be unimoda/and shifts to a larger particle size range. In the free molecular regime and transition regime, the inter- modal coagulation becomes dominant when the number concentrations of mode i and j are of the same order. The effects of the number concentration of mode i and mode j on the evolution of geometric average diameter of mode j are negligible, while the effects of the number concentration of mode j on the evolution of geometric average diameter of mode j is distinct. In the free molecular regime and continuum regime, the higher the initial number concentration of mode j, the more obvious the variation of the number concentration of mode i.

Adsorption and Transfer Properties for Toluene and pDichlorobenzene in Dense CO_2/Silica Gel Packed Bed System by Moment Method and Time-Domain Analysis

Based on chromatographic theory, the moment method and the time-domain fitting analysis were applied to measure and evaluate the adsorption equilibrium constant and mass transfer properties (axial dispersion coefficient and effective intra-particle diffusivity) for toluene and p-dichlorobenzene on silica gel adsorbent in the subcritical and supercritical CO2. An apparatus based on supercritical fluid chromatography was established and the experiments were performed at temperatures of 298.15-318.15 K and pressures of 7.5-17.8 MPa. The two methods have been compared. The results show that for the systems studied here the moment method can give reasonable values for both adsorption equilibrium constant and mass transfer properties, but the time-domain analysis only can obtain the adsorption equilibrium constant. The dependence of adsorption equilibrium constant and mass transfer properties on temperature and pressure was investigated.

The b value spectrum and η value by the moment method

The earthquake size distribution is generally considered to obey the Gutenberg Richter (GR) law. We have introduced the concept of the b value spectrum based on the moment method to investigate the deviation of the actual magnitude distribution of earthquakes from this law. This enables us to describe characteristic features of the magnitude frequency distribution of earthquakes. We found also a simple relation between the η value and the b value spectrum. Analysis using this scheme showed that the actual size distributions of earthquakes have large variations from case to case and sometimes deviate considerably from the widely assumed the GR formula.

Fourier Moment Method with Regularization for the Cauchy Problem of Helmholtz Equation

In this paper, we consider the reconstruction of the wave field in a bounded domain. By choosing a special family of functions, the Cauchy problem can be transformed into a Fourier moment problem. This problem is ill-posed. We propose a regularization method for obtaining an approximate solution to the wave field on the unspecified boundary. We also give the convergence analysis and error estimate of the numerical algorithm. Finally, we present some numerical examples to show the effectiveness of this method.

A method of moments for calculating dynamic responses beyond linear response theory

A method of moments for calculating the dynamic response of periodically driven overdamped nonlinear stochastic systems in the general response sense is proposed, which is a modification of the method of moments confined within linear response theory. The calculating experience suggests that the proposed technique is simple and efficient in implementation, and the comparison with stochastic simulation shows that the first three orders of susceptibilities calculated by the proposed technique have high accuracy. The dependence of the spectral amplification parameters at the first three harmonics on the noise intensity is also investigated, and another observed phenomenon of stochastic resonance in the systems induced by the location of a single periodic orbit is disclosed and explained.

Simulation Methods of Stochastic Volatility Interest Rate Term Structure

A term structure model bearing features of stochastic volatility and stochastic mean drift with jump （SVJ-SD model for short） is built in the paper to describe the stochastic behavior of interest rates.Based on sample data of an interest rate of national bond repurchase,maximum likelihood （ML）,linear Kalman filter and efficient method of moments （EMM） are used to estimate the model.While ML works well for simple models,it may lead to considerable deviation in parameter estimation when dynamic risks of interest rates are considered in them.Linear Kalman filter is a tractable and reasonably accurate technique for estimation cases where ML was not feasible.Moreover,when compared with the first two approaches,using EMM can obtain better parameter estimates for complex models with non-affine structures.

Examination of the poverty-environmental degradation nexus in Sub-Saharan Africa

The relationship between environmental degradation and poverty has increasingly become the focus of national strategic decision-making in recent years.However,despite several theoretical explorations on the nexus,a dearth of empirical literature on the poverty-environmental degradation nexus,specifically on Sub-Saharan Africa(SSA),still exists.In this study,we investigated the poverty-environmental degradation nexus in SSA.We hypothesized that poverty is both a cause and effect of environmental degradation,and this relationship is explained as a vicious cycle.Unlike previous studies,we employed several alternative indicators of environmental degradation to examine the poverty-environmental degradation nexus in this study.We used data from 41 countries of SSA between 1996 and 2019 and employed the generalized method of moments(GMM)approach.The findings suggest a cyclical relationship between poverty and environmental degradation in SSA,which confirms that an increase in poverty leads to an increase in environmental degradation,especially in deforestation and PM2.5 emissions.Similarly,the increase in environmental degradation positively affects poverty in SSA.We also confirmed that exogenous conditioning factors such as population growth rate,education,industrialization,and income inequality,institutional quality indicators such as governance effectiveness,control of corruption,freedom ad civil liberty,and democracy,and endogenous factors including fossil fuel energy use,fuelwood energy use,household health expenditure,infant mortality rate,and agriculture productivity influence the nexus between poverty and environmental degradation.The findings on the relationship between poverty and environmental degradation in SSA are a testimonial evidence that both poverty and environmental degradation are significant issues in SSA.Hence,poverty alleviation policies in SSA should not lead to PM2.5 emissions and deforestation,which may as well force people into a poverty-environmental degradation trap.Instead,poverty reduction policies should simultaneously achieve environmental conservation.

An Efficient Method for Reliability-based Multidisciplinary Design Optimization

Design for modem engineering system is becoming multidisciplinary and incorporates practical uncertainties; therefore, it is necessary to synthesize reliability analysis and the multidisciplinary design optimization （MDO） techniques for the design of complex engineering system. An advanced first order second moment method-based concurrent subspace optimization approach is proposed based on the comparison and analysis of the existing multidisciplinary optimization techniques and the reliability analysis methods. It is seen through a canard configuration optimization for a three-surface transport that the proposed method is computationally efficient and practical with the least modification to the current deterministic optimization process.

An Efficient Algorithm for Calculating Aircraft RCS Based on the Geometrical Characteristics

Taking into account the influences of scatterer geometrical shapes on induced currents, an algorithm, termed the sparse-matrix method （SMM）, is proposed to calculate radar cross section （RCS） of aircraft configuration. Based on the geometrical characteristics and the method of moment （MOM）, the SMM points out that the strong current coupling zone could be predefined according to the shape of scatterers. Two geometrical parameters, the surface curvature and the electrical space between the field position and source position, are deducted to distinguish the dominant current coupling. Then the strong current coupling is computed to construct an impedance matrix having sparse nature, which is solved to compute RCS. The efficiency and feasibility of the SMM are demonstrated by computing electromagnetic scattering of some kinds of shapes such as a cone-sphere with a gap, a bi-arc column and a stealth aircraft configuration. The numerical results show that： （1） the accuracy of SMM is satisfied, as compared with MOM, and the computational time it spends is only about 8% of the MOM; （2） with the electrical space considered, making another allowance for the surface curvature can reduce the computation time by 9.5%.

Surface edge element method for 3-D electromagnetic computation

A surface edge element method is proposed and implemented in the study ofelectromagnetic scattering fields of general targets. The basis functions for surfaces of arbitraryshape are derived according to the geometrical properties of each triangular patch. The proposedbasis functions are 3-D linear functions and the tangential components of the vectors are continuousas the traditional edge element method. Combined field integral equations (CFIE) that include bothelectrical field and magnetic field integral equations are used to model the electromagneticscattering of general dielectric targets. Special treatment for singularity is presented to enhancethe quality of numerical solutions. The proposed method is used to compute the scattering fieldsfrom various targets. Numerical results obtained by the proposed method are validated by resultsfrom other numerical methods.

Environmental Regulation,Pollution Treatment Productivity,and Industrial Environmental TFP in China

Amidst growing environmental protection intensity by the Chinese government, this paper investigates the effects of environmental regulation on China＇s industrial pollution treatment productivity and environmental TFP. By estimating China＇s pollution treatment productivity between 2001 and 2008 and analyzing environmental regulation intensity and the effects of the relevant factors and pollution treatment productivity using panel data, this paper discovers that （1） pollution treatment productivity contributed a significant share of about 40% to industrial environmental TFP during the investigation period; （2） environmental regulation may not necessarily cause adverse impacts on pollution treatment efficiency and productivity but demonstrates a U-shaped relationship： when the share of pollution treatment cost in industrial value-added is above the range of 3.8%-5.1%, environmental regulation is likely to promote pollution treatment productivity and thus environmental TFP Judging by the estimation result, enhancing environmental protection and expediting the development of ecological civilization are conducive to China ＂s economic transition towards an intensive, efficient, circular, and sustainable development pattern. China＇s current industrial development has the capacity to tolerate a rather demanding level of pollution treatment and management and China needs to further rely on energy conservation and the environmental production industries to promote the progress of pollution treatment technologies.