Association of Fibrin Monomer Polymerization Function, Cerebrovascular Risk Factors and Ischemic Cerebrovascular Disease in Old People

In order to investigate the association of fibrin monomer polymerization function (FMPF) with traditional cerebrovascular risk factors and ischemic cerebrovascular disease in old people. 1∶1 paired case-control comparative study was performed for FMPF and traditional cerebrovascular risk factors on 110 cases of old ischemic cerebrovascular disease and 110 controls matched on age, sex and living condition. The results showed that cerebrovascular risk factors were more prevalent in case group than in control group. In the case group, FMPF was significantly higher than in control group. There was a significant positive correlation between hypertension and fibrin monomer polymerization velocity (FMPV), hypertension and fibrinogen (Fbg), alcohol consumption and Fbg, but no significant correlation between diabetic mellitus, smoking and FMPF was found. Among the parameters of blood lipids, there were significant positive correlations between total cholesterol (TC) and parameters of FMPF to varying degrees, triglycerides (TG) and FMPV, TG and Fbg. Our results also showed there were significant linear trends between TC and FMPV (P<0. 001), TC and Fbg (P=0. 0087), TG and FMPV/Amax (maximum absorbance)(P=0. 0143) respectively. Multiple logistic regression analysis revealed that FMPF in case group remained significantly higher than control group after adjustment of all risk factors that were significant in univariate analysis. It was concluded that there is a possible pathophysiological link between FMPF and cerebrovascular risk factors. An elevated FMPF is associated with ischemic cerebrovascular disease and an independent risk factor of this disease. In old people, detection of FMPF might be a useful screening to identify individuals at increased cerebrothrombotic risk.

RADICAL POLYMERIZATION OF VINYL MONOMER INITIATED BY CERIC ION/TARTARIC ACID

The polymerization of acrylamide and acrylonitrile using ceric ion as initiator can be promoted greatly by the tartaric acid. The kinetics of acrylamide polymerization initiated by ceric ion/tartaric acid has been studied. The presence of the species of tartaric acid in Polyacrylonitrile produced by using ceric ion/tartaric acid as niitiator has been confirmed by FT-IR analysis.

Physicochemical and Analytical Studies of Some Monomer and Polymer Complexes Derived from Selected Aroyl Hydrazone

New solid complexes derived from the reaction of aroyl hydrazones, 2-hydroxy-1-naphthaldehyde benzene sulphonyl hydrazone (HNB), and 2-hydroxy-1-naphthaldehyde p-toluene sulphonyl hydrazone (HNT), with Co2+, Ni2+, and Cu2+ salts have been isolated and characterized using elemental analyses, spectral (UV-vis., IR), molar conductivity and magnetic measurements. The modes of bonding as well as the stereochemistry of the isolated solid complexes were discussed. The results suggested that both HNB and HNT coordinated with the metal ions in a bidentate manner forming a polymeric chain in the case of HNB while monocular complexes were formed in the case of HNT. The amounts of solvent in the solid complexes were determined by TGA measurements. Also, spectral studies of HNT with Co2+ and Fe3+ ions in solution were carried and the ratio of complexes was determined by continuous variation, molar ratio, and slope ratio methods. Moreover, the results suggest the formation of 1:1 (M:L) for Co2+ ions while three species with ratios of 1:1, 1:2, and 2:1 (M:L) have been observed in the case of Ni2+ and Cu2+. Finally, conductance titration of HNB and HNT with Co2+ ion elucidates the formation of two species with ratios 1:1 and 1:2 (M:L) in the case of the Co2+-HNB while 1:1 (M:L) belongs to the Co2+-HNT system.

Preparation of Poly(o-toluidine)/Nano ZrO2/Epoxy Composite Coating and Its Application for Corrosion Protection of Steel

The main objective was to study the anticorrosion performance of poly（o-toluidine）/nano ZrO2/epoxy composite coating.Poly（o-toluidine）/nano ZrO2 composite was prepared by in situ polymerization of o-toluidine monomer in the presence of nano ZrO2 particles.Fourier transformation infrared spectroscopy（FT-IR）,UV-visible spectroscopy（UV-vis）,X-ray diffraction（XRD）,Scanning electron microscopy（SEM）,and Thermogravimetric analysis（TGA） were used to characterize the composition and structure of the composite.Poly（o-toluidine）/nano ZrO2 composite was mixed with epoxy resin through a solution blending method and the three components poly（o-toluidine）/nano ZrO2/epoxy composite coating was coated onto the surface of steel sample by the brush coating method.The anticorrosion performance of poly（o-toluidine）/nano ZrO2/epoxy composite coating on steel sample was studied by polarization curve and electrochemical impendence spectroscopy in 3.5% Na Cl solution as corrosion environment and also compared with that of poly（o-toluidine）/epoxy composite coating and pure epoxy coating.It was observed that the composite coating containing poly（otoluidine）/nano ZrO2 composite has got higher corrosion protection ability than that of poly（o-toluidine）.The electrochemical measurement results demonstrated that poly（o-toluidine） fillers improve the electrochemical anticorrosion performance of epoxy coating and the addition of nano ZrO2 particles increases the tortuosity of the diffusion pathway of corrosive substances.

Highly chemoselective lipase from Candida sp.99-125 catalyzed ring-opening polymerization for direct synthesis of thiol-terminated poly(e-caprolactone)

Lipase from Candida sp.99-125 catalyzed ring-opening polymerization of e-caprolactone in the presence of 6-mercapto-1-hexanol was presented as a new metal-free approach for direct synthesis of welldefined thiol-terminated poly（e-caprolactone）.Remarkably,high chemoselectivity of lipase from Candida sp.99-125 toward hydroxyl and thiol was exhibited and quantitative thiol fidelity over 90% was achieved.The tedious protecting/deprotecting steps for thiol and metal residue were avoided.The polymerizations with around 70% monomer conversion were conducted in bulk and toluene at relative low temperature of 40 ℃.Number–average molecular weight of resulted polymers ranged from 3000 to4700 Da by changing the feed ratio between monomer and initiator.The structures of obtained thiolterminated poly（e-caprolactone） were demonstrated by combining NMR and SEC analyses.

Two-photon polymerization fabrication and Raman spectroscopy research of SU-8 photoresist using the femtosecond laser

In this work, a two-photon polymerization(2PP) processing device was built using the femtosecond laser, and femtosecond laser direct writing was performed on SU-8 photoresist. Due to the 2PP effect of the photoresist caused by the femtosecond laser, the polymeric line with size less than the focal spot size is obtained. Based on the Raman spectroscopy characterization of SU-8 polymer before and after 2PP, we research the dynamic process of femtosecond laser induced 2PP. In Raman spectra, some scattering peaks with large intensity variation, such as 1 108 cm^(-1) and 1 183 cm^(-1), indicate that the asymmetric stretching vibration of C-O-C bond in SU-8 polymer is increased. By comparison, we can find that 2PP only affects the light absorption of initiator, but does not affect the monomer polymerization. It is helpful to understand the interaction of photoresist and femtosecond laser, and plays an important role in quantitatively controlling the polymerization degree of SU-8 polymer and improving the processing resolution of 2PP.

Novel Terpolymers of Poly(p-dioxanone-co-trimethylene carbonate-co-Lphenylalanine)： Synthesis, Characterization, Thermal Properties and Copolymerization Mechanism

In order to exploit the biological functions of materials, a series of new random terpolymers were synthesized by the ring-opening polymerization of p-dioxanone, trimethylene carbonate, and L-phenylalanine N-carboxyanhydride（L-PheNCA） in the presence of stannous octoate. The terpolymers were characterized by 1H-NMR, 13C-NMR, FTIR, and gel permeation chromatography. The effects of the reactant ratio, catalyst dosage, reaction temperature and time on the copolymerization were investigated, and were found to regulate the composition of the terpolymer. Increases in the reaction temperature, polymerization time, L-Phe-NCA monomer amount, and catalyst content generated a product with a slightly decreased molecular weight. The crystallinity of the terpolymer was investigated by differential scanning calorimetry and polarized optical microscopy. A reasonable mechanism for the polymerization was proposed based on the obtained results.