High-temperature resistant polymer nanocomposites with exfoliated organic-modified montmorillonite nanosheets strongly adsorbed on polymer chains

It has been demonstrated that almost all polymer-clay nanocomposites show higher temperature stability than that of pure polymer, which is attributed to the active exfoliated clay nanosheet firmly adsorbed onto the polymer chains, due to polerization and nucleation effect, the clay nanosheets could protect the polymer chains from destroying. To prove such mechanism, the water-soluble polymer nanocomposites(AAA/SLS-MMT) were synthesized by the in-situ polymerization of 2-acrylamide-2-methyl-propane sulfonic acid, acrylamide, 4-acryloylmorpholine, and organically modified montmorillonite. The techniques of nuclear magnetic resonance, atomic force microscopy and scanning electron microscopy etc., clearly characterized the successful synthesized of sample's structure, the exfoliated MMT nanosheet adsorbed polymer chain's scale, and well-dispersed morphology, espectively. The adsorption model, X-ray photoelectron spectroscopy presented the existence of strong adsorption, while molecular simulation calculations first concluded that the strong adsorption energy was-13032.06 kcal/mol. Thermo-gravimetric-analysis proved the temperature of maximum thermal degradation of powder sample(AAA/1.0 wt% SLS-MMT) was over 298℃. After ageing at 180℃ for 4 h, the apparent viscosity of 5 g/L AAA/1.0 wt% SLS-MMT aqueous solution was 326.7 mPa,s, while that of pure polymer(AAA) was only 8.3 mPa,s. This optimized sample has the smallest FLAPIvalue at all test temperatures from 180 to 220℃ in both fresh and salt water based drilling fluid. All the evidences of high temperature resistance indicate that the strong adsorption can enhance the thickness of hydrated shell and adsorption of clay particles in drilling fluid at high temperature. Such mechanism supplied the better way to design high-temperature resistant fluid loss additives for deep and ultra-deep oil and gas formation engineering.

Bi2WO6 quantum dot-intercalated ultrathin montmo- rillonite nanostructure and its enhanced photocatalytic performance

The kinetic competition between electron-hole recombination and water oxidation is a key limitation for the development of efficient solar water splitting materials. In this study, we present a solution for solving this challenge by constructing a quantum dot-intercalated nanostructure. For the first time, we show the interlayer charge of the intercalated nanostructure can significantly inhibit the electron-hole recombination in photocatalysis. For Bi2WO6 quantum dots （QDs） intercalated in a montmorillonite （MMT） nanostructure as an example, the average lifetime of the photogenerated charge carriers was increased from 3.06 μs to 18.8 Ds by constructing the intercalated nanostructure. The increased lifetime markedly improved the photocatalytic performance of Bi2WO6 both in solar water oxidation and environmental purification. This work not oMy provides a method to produce QD-intercalated ultrathin nanostructures but also a general route to design efficient semiconductor-based photoconversion materials for solar fuel generation and environmental purification.