Physical Properties of Crushed Air-cooled Blast Furnace Slag and Numerical Representation of Its Morphology Characteristics

Physical properties and geometrical morphologies of crushed air-cooled blast furnace slag （SCR） and crushed limestone （LCR） were comparatively investigated. The shape, angularity, surface texture and internal pore structure of aggregate particles for different size and gradation were numerically represented by sphericity （ψ） and shape index （SI）, angularity number （AN）, index of aggregate particle shape and texture （IAPST）, porosity and pore size, respectively. The results show that SCR is a porous and rough aggregate. Apparent density, void, water absorption and smashing index of SCR are obviously higher than those of LCR with the same gradation, respectively. However, bulk density of SCR is lower than that of LCR with the same gradation. SI, AN, IAPST and porosity of SCR are obviously higher than those of LCR with the same gradation, respectively. The smaller particle size of SCR, the larger of its AN, IAPST and porosity.

Morphology characteristics of joint surface in rock mass

In order to quantify the characteristics of the surface of jointed rock mass,new equipment,the three-dimensional laser surface topography instrument,was used to accurately measure surface morphology of joints.Scan pictures and parameters were obtained to describe the rock joint surface characteristics,for example,the height frequency of surface,and mean square roughness.Using the method of fractal dimension,the values of joint roughness coefficient(JRC) were calculated based on the above parameters.It could access to the joint surface rock sample morphology of the main parameters of characteristic.The maximum peak height is 2.692 mm in the test joint plane.The maximum profile height is 4.408 mm.JRC value is 6.38 by fractal dimension computing.It belongs to the smooth joint surface.The results show that it is a kind of the effective method to quantitatively evaluate the surface topography by the three-dimensional laser surface topography instrument and the fractal dimension method.According to the results,during the process of underground large-scale mining,safe measures to prevent slip failure of the joint plane by controlling surface tension and shear mechanical response were proposed.

Morphology characteristics of α precipitates related to the crystal defects and the strain accommodation of variant selection in a metastableβtitanium alloy

Profound and comprehensive investigations on the morphology characteristics ofαprecipitates are essential for the microstructural control of metastableβtitanium alloys.At the very beginning of aging treatment,intragranularαprecipitates with a dot-like morphology begin to generate nearby the dislocations,then those dot-likeαprecipitates with the same crystallographic orientation tend to connect with each other to develop a lath-like morphology.With the progress of aging treatment,the orientated lath-likeαprecipitates gradually combine with each other to form the V-shaped clusters or the triangular ones.The dislocations of{110}_(β)<111>βedge type are evidenced within theβgrains,and it is found that variant selection ofαprecipitates induced by the transformation strain and the interplay betweenαvariants and the dislocations are confirmed as the key factors for the formation of the V-shaped or triangular clusters.The results of this work could provide underlying knowledge on the morphology characteristics of intraguranularαprecipitates related to the crystal defects and the strain accommodation ofαvariants in metastableβtitanium alloys.

First record of abnormal body coloration in a rockfish Sebastes koreanus(Scorpaenoidei:Sebastidae)from coastal water of China based on morphological characteristics and DNA barcoding

The first record of abnormal body coloration in Sebastes koreanus Kim and Lee,1994,from the Yellow Sea of China,was documented based on morphological characteristics and DNA barcoding.The two rockfish specimens were collected from the coastal waters of Qingdao,China,and the whole body and all fins of them were red.Of the two red-colored rockfish,there were tiny deep red spots on each fin,2 red radial stripes behind and below the eyes and 1 large deep red blotch on the opercula,while the similar stripe and spot patterns are also present in the S.koreanus specimens with normal body coloration.The countable characteristics of the two specimens are in the range of the morphometry of S.koreanus.To further clarify the species identity and taxonomic status of the two specimens,DNA barcode analysis was carried out.The genetic distance between the red-colored rockfish and S.koreanus was 0,and the minimum net genetic distances between the red-colored rockfish and other Sebastes species except for S.koreanus were 3.0%,which exceeds the threshold of species delimitation.The phylogenetic analysis showed that the DNA barcoding sequences of the two red-colored rockfish clustered with the S.koreanus sequences.The above results of DNA barcode analysis also support that the two red-colored rockfish could be identified as the species of S.koreanus.The mechanism of color variation in S.koreanus is desirable for further research and the species could be an ideal model to study the color-driven speciation of the rockfishes.

Cluster Analysis of Morphologic Characteristic of Eight Geographical Populations of Rana Dybowskii

[ObJective] The research aimed to determine the geographic distribution map of system of Rana dybowskii. [Method] Four morphologic indices （body length, body weight, forelimb length, hindlimb length） of eight geographical populations of R.dybowskii which naturally distribute in Changhai Mountain and Xiaoxing＇an Mountain were measured. Measure results were variance analyzed and cluster analyzed. [Result] Variance analysis showed： the genetic branching among the Dongfanghong male population（ belongs to Wandashan） and Xiaoxing＇an Mountain male population and Changbai Mountain male population were significantly different （P〈0.05） ; the genetic branching between the Hebei female population （belongs to Xiaoxing＇an Mountain） and Changbai Mountain female population was significantly different （P〈0.05 ）. Cluster analysis showed ： male R.dybowskii can be divided into three groups ： the first group included Quanyang, Tianbei, Chaoyang and Ddkouqin, the second group included Tieli and Anshan, the third group included Dongfanghong; and the female R. dybowskii can be divided into three groups ： the first group included Quanyang and Chaoyang, the second group included Tianbei and Dakouqin, the third group included Hebei. [Condusion] The paper deduced that the Sanjiang Plain was the geographical origin center ofR. dybowskii which radiated to Changbai Mountain and Xiaoxing＇an Mountain along the adverse current of Songhua River basin, therefore, the current distribution pattern of R. dybowskii was formed.

Morphological Characteristics Analysis of 11 Broom Sorghum Varieties

[Objective] To provide a theoretical basis for high-yield breeding of broom sorghum.[Method] Using 11 kinds of broom sorghum collected at home as research objects, the differences in morphological characteristics of broom sorghum were compared through the survey of some indicators, such as plant height, tillering, inflorescence, stem node, stem-leaf ratio, yield, and so on. [Result] The 11 kinds of broom sorghum were different in morphological characteristics with large amplitude of plant height; zygl-1, zygl-6, zygl-8 and zygl-9 were appropriate for fixed broom type; zygl-9 had the highest integrated production. [Condusion] The study laid the foundation for further exploring breeding, cultivation and promotion of broom sorghum.

Effects of Silicon at Different Concentrations on Morphology and Photosynthetic Physiological Mechanism of Japonica Rice

[Objective] The aim was to explore effects of silicon at different concentrations on morphology and photosynthetic physiological mechanism of japonica rice. [Method] Seedlings of japonica rice were treated with silicon at different concentrations （0, 30, 80, 130 and 180 mg/L of sodium silicate）; silicon contents were measured with Molybdenum blue spectrophotometric method in root, stem and leaf; plant height, root length and number in different treatment groups were measured with tools; chlorophyll a and b, and a/b in leaf and stem of rice in different groups were measured. [Result] Silicon contents in vegetative organs were as follows： stem〉leaf〉 root; when silicon was 80 mg/L, japonica ecotype was shortest; when silicon was 30 mg/L, root length of the rice was shortest and root number was least; when silicon was 30 mg/L, contents of chlorophyll a and b were highest and chlorophyll a/b achieved the peak when silicon was 80 mg/L. [Conclusion] Silicon at proper concen- tration would improve lodging-resistance and efficiency of photosynthesis, further enhancing yield of japonica rice.

Pollen Morphology and Ecological Significance of Nine Hygrophyte Species at Sevenstar Lake Area in the Bashang Area of Hebei Province

ObjectiveThis study aimed to investigate the morphological characteristics of pollen from nine hygrophyte species at Sevenstar Lake area in the Bashang Area （the southern edge of Inner Mongolian Plateau） of Hebei Province, as well as their ecological significance. MethodThe pollen morphology of nine hygrophyte species distributed at Seven Star Lake area was observed and studied by using an optical microscope, and morphological characteristics like size, shape, surface ornamentation were recorded. ResultsPollen grains were globose, subglobose prolate spheroidal; germination aperture had five types, namely, 3-groove, 6-groove, 3 （4）-groove, 3-colporate, 3 （4）-colporate; ektexine possessed four kinds of ornamentation： reticulate, striped, spiny, granular. Meanwhile, the environmental indication significance of these nine hygrophyte species was also discussed according to their habitats, origin and distribution. ConclusionThe study provides the basis of modern palynology for the study of ancient environment, ancient vegetation and paleoclimate.

Island instantaneous coastline extraction based on the characteristics of regional statistics of multispectral remote sensing image

This study adopted IKONOS remote sensing images and selected spectral characteristic areas, through regional pixel statistics and calculating weight coefficients of each band, processed the images with the spectral normalized method, which made the features of islands, land and water features more obviously in the images. On this basis, the OTUS was used to determine the optimal segmentation threshold, and the normalization image binarization was made, thus the island coastline was extracted. This method used the characteristic curve method to separate the land and water, obtained the binarization images and maintained the original edge effectively. The coastline that was extracted by Binary Morphology was continuous, reliable and high signal-to-noise ratio. The results showed that this method could extract the coastline fast, simply and effectively, which had the practical value.

Review of the characteristics and graded utilisation of coal gasification slag

The characteristics of the energy structure of rich coal,less oil and less gas,coupling with a high external dependence on oil and natural gas and the emphasis on the efficient and clean utilisation of coal,have brought opportunities for coal chemical industry.However,with the large-scale popularisation of coal gasification technology,the production and resulting storage of coal gasification slag continue to increase,which not only result in serious environmental pollution and a waste of terrestrial resources,but also seriously affect the sustainable development of coal chemical enterprises.Hence,the treatment of coal gasification slag is extremely important.In this paper,the production,composition,morphology,particle size structure and water holding characteristics of coal gasification slag are introduced,and the methods of carbon ash separation of gasification slag,both domestically and abroad,are summarised.In addition,the paper also summarises the research progress on gasification slag in building materials,ecological restoration,residual carbon utilisation and other high-value utilisation,and ultimately puts forward the idea of the comprehensive utilisation of gasification slag.For large-scale consumption to solve the environmental problems of enterprises and achieve high-value utilisation to increase the economic benefits of enterprises,it is urgent to zealously design a reasonable and comprehensive utilisation technologies with simple operational processes,strong adaptability and economic benefits.

Historical trends in maize morphology from the 1950s to the 2010s in China

The morphology of the plant and ear is a preliminary selection characteristic in breeding new varieties of maize.As new maize cultivars were developed from the 1950s through the 2010s in China,most had changes in both plant and ear morphological characteristics that contributed substantially to maize yield gains.Over the seven decades,plant and ear height fluctuated with a small increase from the 1950s to 2000s,and then a decrease in the 2010s,while the ear ratio and internodes length below the ear decreased significantly.Leaf angles became significantly more upright,especially for the leaves above the ear,and the leaf area per plant improved markedly.Leaf orientation increased from the 1950s to the 2000s then decreased in the 2010s.Tassel size and the anthesis-silking interval were both reduced substantially.Ear diameter,kernel number,and kernel weight increased from the 1950 to the 2000s,then decreased in the 2010s under the same cultivation conditions.We found that modern maize hybrids have a lower plant height,ear height and ear ratio which increased lodging resistance,a more erect leaf which increased high-density planting tolerance,and smaller ears and kernels which facilitated rapid dehydration during late grain filling.These morphological selection criteria,which are suitable for mechanized operations,are proposed as the focus for future maize breeding.

Building Morphological Characteristics and Their Effect on the Wind in Beijing

An urban boundary layer model （UBLM） is improved by incorporating the effect of buildings with a sectional drag coefficient and a height-distributed canopy drag length scale. The improved UBLM is applied to simulate the wind fields over three typical urban blocks over the Beijing area with different height-towidth ratios. For comparisons, the wind fields over the same blocks are simulated by an urban sub-domain scale model resolving the buildings explicitly. The wind fields simulated from the two different methods are in good agreement. Then, two-dimensional building morphological characteristics and urban canopy parameters for Beijing are derived from detailed building height data. Finally, experiements are conducted to investigate the effect of buildings on the wind field in Beijing using the improved UBLM.

Morphology and controlling factors of the longitudinal profile of gullies in the Yuanmou dry-hot valley

The morphology of the gully longitudinal profile （GLP） is an important topographic index of the gully bottom associated with the evolution of the gullies. This index can be used to predict the development trend and evaluate the eroded volumes and soil losses by gullying. To depict the morphology of GLP and understand its controlling factors, the Global Positioning System Real-time Kinematic （GPS RTK） and the total station were used to measure the detail points along the gully bottom of 122 gullies at six sites of the Yuanmou dry-hot Valley. Then, nine parameters including length （Lt）, horizontal distance （Dh）, height （H）, vertical erosional area （A）, vertical curvature （Co）, concavity （Ca）, average gradient （Ga）, gully length-gradient index （GL）, normalized gully length-gradient index （Ngl）, were calculated and mapped using CASS, Excel and SPSS. The results showed that this study area is dominated by slightly concave and medium gradient GLPs, and the lithology of most gullies is sandstone and siltstone. Although different types of GLPs appear at different sites, all parameters present a positively skewed distribution. There are relatively strong correlations between several parameters： namely Lt and H, Dh and H, Lt and A, Dh and A, H and GL. Most GLPs, except three, have a best fit of exponential functions with quasi- straight shapes. Soil properties, vegetation coverage, piping erosion and topography are important factors to affect the GLP morphology. This study provides useful insight into the knowledge of GLP morphology and its influential factors that are of critical importance to prevent and control gully erosion.

Morphological Characteristics of Precipitation Areas over the Tibetan Plateau Measured by TRMM PR

The multidimensional morphological characteristics(including scale, horizontal shape and 3 D morphology) of precipitation areas over the Tibetan Plateau in summer were studied using 15 years(1998–2012) of observational data from the precipitation radar onboard the Tropical Rainfall Measuring Mission satellite. As the scale of the precipitation area increased from 20 to 150 km, the near-surface rain rate(RRav) of the precipitation area increased by up to 78%(from ~1.12 to ~2 mm h~(-1)). Linear precipitation areas had the lowest median RRav(~1 mm h~(-1) over the eastern Tibetan Plateau),whereas square-shaped precipitation areas had the highest median RRav(~1.58 mm h~(-1) over the eastern Tibetan Plateau).The 3D morphology was defined as the ratio of the average vertical scale to the average horizontal scale, where a large value corresponds to thin and tall, and a small value corresponds to plump and short. Thin-and-tall precipitation areas and plump-and-short precipitation areas had a greater median RRav, whereas the precipitation areas with a moderate 3D morphology had the lowest median RRav. The vertical structure of the precipitation-area reflectivity was sensitive to both size and 3D morphology, but was not sensitive to the horizontal shape. The relationship between RRav and the morphological characteristics was most significant over the southern slopes of the Tanggula Mountains and the Tibetan Plateau east of 100°E. The morphological characteristics of precipitation areas are therefore closely related to the intensity of precipitation and could potentially be used to forecast precipitation and verify numerical models.

Analysis of morphological characteristics of gravels based on digital image processing technology and self-organizing map

A comprehensive understanding of spatial distribution and clustering patterns of gravels is of great significance for ecological restoration and monitoring.However,traditional methods for studying gravels are low-efficiency and have many errors.This study researched the spatial distribution and cluster characteristics of gravels based on digital image processing technology combined with a self-organizing map(SOM)and multivariate statistical methods in the grassland of northern Tibetan Plateau.Moreover,the correlation of morphological parameters of gravels between different cluster groups and the environmental factors affecting gravel distribution were analyzed.The results showed that the morphological characteristics of gravels in northern region(cluster C)and southern region(cluster B)of the Tibetan Plateau were similar,with a low gravel coverage,small gravel diameter,and elongated shape.These regions were mainly distributed in high mountainous areas with large topographic relief.The central region(cluster A)has high coverage of gravels with a larger diameter,mainly distributed in high-altitude plains with smaller undulation.Principal component analysis(PCA)results showed that the gravel distribution of cluster A may be mainly affected by vegetation,while those in clusters B and C could be mainly affected by topography,climate,and soil.The study confirmed that the combination of digital image processing technology and SOM could effectively analyzed the spatial distribution characteristics of gravels,providing a new mode for gravel research.

Morphological characteristics in the area off eastern Taiwan Island and their tectonic implications

On the basis of bathymetric data and other geological and geophysical data obtained during the first survey conducted by Chinese Mainland in the area off eastern Taiwan Island from May to June in 2000, the morphological features of the region, the tectonic control to the seafloor topography and their tectonic implication are studied and discussed. The results have revealed that both the slope zone of the Ryukyu arc and the Ryukyu Trench present a typical morphotectonic characteristics controlled by the trench-arc system in the West Pacific Ocean. At the slope of eastern Taiwan Island the isobathic lines parallel to the coastline and distribute densely in nearly N-S direction and the slope gradient of topography is large. Such a unique feature is attributed to the collision of the Luzon arc and Eurasia continent. In the Huatung Basin, turbidity fans and submarine canyons are well developed, the formations of which are mainly related to the steep topography of the slope of the Luzon arc and the abundant supply of sediments. These submarine canyons are controlled by basement highs and strike-slip faults. On eastern side and western side of the Gagua Ridge, both the water depth and morphological features are different, but the basement of Gagua Ridge belongs to the Huatung Basin. The eastern side of the Gagua Ridge (123°12′E) corresponds to the boundary of two plates with different ages. In the West Philippine Basin, linear ridges and troughs in a NW trending are identified, which are dissected by a NE trending transform fault. According to the seafloor topography features, the direction of the transform fault and the magnetic anomaly lineations, the seafloor of this region was formed during 60-45 Ma B. P. when the West Philippine Basin was spreading along NE-SW relative to the present orientation.

Observation of Morphological Characteristics on Rhbdophaga SP

[Objective] The research aimed at describing morphological characteristics of Rhbdophaga SP. [Method] The morphological characteristics of gall midges （Rhbdophaga SP） on salix, which distributed along lake area of Huaihe river in Huoqiu Country, were observed from March, 2008 to June, 2010, and larval instars, larval duration and pupal duration were also divided. [Result] Morphological characteristics of Rhbdophaga SP were described in detail, and the larvae were divided into three instars based on the development and molting with the greatly varied shapes and sizes. The pupa is free pupa, and the development of a pupa was divided into four stages, pre-pupal stage, early pupal stage, mid-pupal stage and late puapl stage. [Conclusion] Results were referential for further research of Rhbdophaga SP.

Analysis of genotype differences of rice response to low Zn^(2+) activity and some morphological characteristics

Zinc deficiency is one of the most widespreadmicro-nutritional disorder for rice. To solve the problem, screening Zn-efficient cultivars isan available method and understanding geno-

Morphological characteristics and atomic evolution behavior of nanojoints in Ag nanowire interconnect network

Ag nanowires(AgNWs)have shown great application value in the field of flexible electronics due to their excellent optical and electrical properties,and the quality of its joints of AgNWs in the thin film network directly plays a key role in its performance.In order to further improve the joint quality of AgNWs under thermal excitation,the thermal welding process and atomic evolution behavior of AgNWs were investigated through a combination of in situ experimental and molecular dynamics simulations.The influence of processing time,temperature,and stress distribution due to spatial arrangement on nanojoints was systematically explored.What is more,the failure mechanisms and their atomic interface behavior of the nanojoints were also investigated.

Morphology and leaf nutrition of introduced Robinia pseudoacacia clones

In order to study and popularize clones from the introduced Robinia pseudoacacia, morphological charac- teristics and leaf nutrition of samples of a three-year-old stand were observed and analyzed during its growing season. Combined with data on rooting ability, height and basal diameter, comparisons were made on morphological characteris- tics, growth traits and leaf nutrition of 11 introduced R. pseudoacacia clones （two from Hungary and nine from South Ko- rea） and two domestic clones, The results show that there are significant differences in growth and morphological char- acteristics among the 13 clones, but no significant differences in the contents of crude protein and crude fibers in the leaves （p 〉 0.05）. Height and basal diameter growth of clones B and G were recorded as the fastest, while clone H1 was the slowest. Clone H2 had the largest leaflets, three times as large as other clones, while K4 had the heaviest dry weight per 100 leaflets because of its thick leaves. The 13 clones can be divided into four classes based on the number of leaf- lets per compound leaf, i.e., 1-3, 13-17, 15-23 and 21-25. There were significant differences in thorn size： H2, with the largest leaflets had the smallest thorns. While of course all clones produced roots, there were significant differences; clones 2N, K5 and B had many adventitious roots, while clones K3, K4 and H1 had few. Correlation between content of crude protein and （length x width of leaf） was positive （p 〈 0.05）, while correlations of the content of crude protein, with the number of leaflets per compound leaf, petiole length of compound leaf and thorn length were negative （p 〈 0.01）. Plant height and basal diameter were positively correlated with each other （p 〈 0.01） and negatively correlated with base width of thorns （p 〈 0.05）.