Projectile size effect is of great importance since the scaling researches are extensively applied to concrete penetration investigations. This paper numerically deals with the projectile size effect on penetration re...Projectile size effect is of great importance since the scaling researches are extensively applied to concrete penetration investigations. This paper numerically deals with the projectile size effect on penetration resistance via the recently developed Lattice Discrete Particles Model(LDPM) which is featured with mesoscale constitutive laws governing the interaction between adjacent particles to account for cohesive fracture, strain hardening in compression and compaction due to pore collapse. Simulations of two different penetration tests are carried to shed some light on the size effect issue. The penetration numerical model is validated by matching the projectile deceleration curve of and predicting the depth of penetration(DOP). By constant velocity penetration simulations, the target resistance is found to be dependent on the projectile size. By best fitting numerical results of constant velocity penetration, a size effect law for target resistance is proposed and validated against literature data. Moreover, the size effect is numerically obtained in the projectile with longer extended nose part meanwhile the shorter extended nose is found to improve the DOP since the projectile nose is sharpened.展开更多
鉴于科技的进步和实验经验,ISO/TC 209出台ISO14644-1:2015《按粒子浓度划出空气洁净度等级》Classification of air cleanliness by particle concentration比ISO14644-1:1999《空气洁净度等级》Classification of air cleanliness技...鉴于科技的进步和实验经验,ISO/TC 209出台ISO14644-1:2015《按粒子浓度划出空气洁净度等级》Classification of air cleanliness by particle concentration比ISO14644-1:1999《空气洁净度等级》Classification of air cleanliness技术概念更清晰,使用更方便;实事求是,更赋灵活性:分级表中,所有浓度值都是累积,包括所有大于等于关注粒径(Considered particle size)的粒子的最大允许浓度值(Maximun allowable concentration siae),浓度限值。区域粒子浓度太高,浓度限值不适用;或者由于低浓度时采样和统计方法的局限性区域分级不适用。按统计学技术概念,决定检测洁净度最少采样点数N_(L);N_(L)值与洁净度无直接关联。作为标准应用的补充,超净环境检测需关注超高过滤器滤材最易穿透粒径MPPS,Most penetrating particle size。展开更多
基金supported by the Natural Science Foundation of Jiangsu Province (No. BK20170824)the Fundamental Research Funds for the Central Universities (No. 30917011343)
文摘Projectile size effect is of great importance since the scaling researches are extensively applied to concrete penetration investigations. This paper numerically deals with the projectile size effect on penetration resistance via the recently developed Lattice Discrete Particles Model(LDPM) which is featured with mesoscale constitutive laws governing the interaction between adjacent particles to account for cohesive fracture, strain hardening in compression and compaction due to pore collapse. Simulations of two different penetration tests are carried to shed some light on the size effect issue. The penetration numerical model is validated by matching the projectile deceleration curve of and predicting the depth of penetration(DOP). By constant velocity penetration simulations, the target resistance is found to be dependent on the projectile size. By best fitting numerical results of constant velocity penetration, a size effect law for target resistance is proposed and validated against literature data. Moreover, the size effect is numerically obtained in the projectile with longer extended nose part meanwhile the shorter extended nose is found to improve the DOP since the projectile nose is sharpened.
文摘鉴于科技的进步和实验经验,ISO/TC 209出台ISO14644-1:2015《按粒子浓度划出空气洁净度等级》Classification of air cleanliness by particle concentration比ISO14644-1:1999《空气洁净度等级》Classification of air cleanliness技术概念更清晰,使用更方便;实事求是,更赋灵活性:分级表中,所有浓度值都是累积,包括所有大于等于关注粒径(Considered particle size)的粒子的最大允许浓度值(Maximun allowable concentration siae),浓度限值。区域粒子浓度太高,浓度限值不适用;或者由于低浓度时采样和统计方法的局限性区域分级不适用。按统计学技术概念,决定检测洁净度最少采样点数N_(L);N_(L)值与洁净度无直接关联。作为标准应用的补充,超净环境检测需关注超高过滤器滤材最易穿透粒径MPPS,Most penetrating particle size。
文摘建立了氧枪喷吹石灰石粉的冷态模型,用水模拟钢水,用浸盐空心三氧化二铝模拟石灰石粉,用真空泵油模拟炉渣,研究了熔池的均混时间、粉剂分布和粉剂穿透比.考察了底气流量和枪位对均混时间的影响,同时在优化的工艺条件下,测定了熔池的粉剂穿透比和粉剂分布,确定了实验室条件下最佳操作工艺.结果表明,顶吹喷粉条件下氧枪枪位应略微下降,枪位为258 mm,底气流量为2.0 m3/h;粉剂穿透比随固气比和粉剂粒度的增加而增加,确定了实验条件下最佳粉剂粒度为0.212-0.380 mm.
