New Reynolds' mean momentum equations including both turbulent viscosity and dispersion are used to analyze atmospheric balance motions of the planetary boundary layer. It is pointed out that turbulent dispersion ...New Reynolds' mean momentum equations including both turbulent viscosity and dispersion are used to analyze atmospheric balance motions of the planetary boundary layer. It is pointed out that turbulent dispersion with r 0 will increase depth of Ekman layer, reduce wind velocity in Ekman layer and produce a more satisfactory Ekman spiral lines fit the observed wind hodograph. The wind profile in the surface layer including tur-bulent dispersion is still logarithmic but the von Karman constant k is replaced by k1 = 1 -2/k, the wind increasesa little more rapidly with height.展开更多
To study the evolution of nanoparticles during Al wire electrical explosion,a nanoparticle formation model that considered layered motion was developed,and an experimental system was set up to carry out electrical exp...To study the evolution of nanoparticles during Al wire electrical explosion,a nanoparticle formation model that considered layered motion was developed,and an experimental system was set up to carry out electrical explosion experiments using 0.1 mm and 0.2 mm Al wires.The characteristic parameters and evolution process during the formation of nanoparticles were calculated and analyzed.The results show that the maximum velocities of the innermost and outermost layers are about 1200 m·s-1and 1600 m·s-1,and the velocity of the middle layer is about 1400 m·s-1,respectively.Most of the nanoparticles are formed in the temperature range of2600 K-2500 K.The characteristic temperature for the formation of Al nanoparticles is~2520K,which is also the characteristic temperature of other parameters.The size distribution range of the formed nanoparticles is 18 to 110 nm,and most of them are around 22 nm.The variation of saturated vapor pressure determines the temperature distribution range of particle nucleation.There is a minimum critical diameter of particles(~25 nm);particles smaller than the critical diameter can grow into larger particles during surface growth.Particle motion has an effect on the surface growth and aggregation process of particles,and also on the distribution area of larger-diameter particles.The simulation results are in good agreement with the experiments.We provide a method to estimate the size and distribution of nanoparticles,which is of great significance to understand the formation process of particles during the evolution of wire electrical explosion.展开更多
The Lagrangian equations of motion of small particle in turbulent boundary layer flows, taking into account the effects of the drug force caused by the wall presence, the Saffman and the Magus lift forces et al., is s...The Lagrangian equations of motion of small particle in turbulent boundary layer flows, taking into account the effects of the drug force caused by the wall presence, the Saffman and the Magus lift forces et al., is studied. Using the spectral method, analytical expression relating to the Lagrangian power spectra of particle velocity to that of the fluid are developed and the results are used to evaluate various responses statistics. In this paper, the results clearly show that the turbulent diffusivity of the particle may be larger than that of the fluid for a period of long-time.展开更多
In this paper, we proposed a novel Two-layer Motion Estimation(TME) which searches motion vectors on two layers with partial distortion measures in order to reduce the overwhelming computational complexity of Motion E...In this paper, we proposed a novel Two-layer Motion Estimation(TME) which searches motion vectors on two layers with partial distortion measures in order to reduce the overwhelming computational complexity of Motion Estimation(ME) in video coding. A layer is an image which is derived from the reference frame such that the sum of a block of pixels in the reference frame determines the point of a layer. It has been noticed on different video sequences that many motion vectors on the layers are the same as those searched on the reference frame. The proposed TME performs a coarse search on the first layer to identify the small region in which the best candidate block is likely to be positioned and then perform local refined search on the next layer to pick the best candidate block in the located small area. The key feature of TME is its flexibility of mixing with any fast search algorithm. Experimental results on a wide variety of video sequences show that the proposed algorithm has achieved both fast speed and good motion prediction quality when compared to well known as well as the state-of-the-art fast block matching algorithms.展开更多
In southern China, cold air is a common weather process during the winter season; it can cause strong wind, sharp temperature decreases, and even the snow or freezing rain events. However, the features of the atmosphe...In southern China, cold air is a common weather process during the winter season; it can cause strong wind, sharp temperature decreases, and even the snow or freezing rain events. However, the features of the atmospheric boundary layer during cold air passage are not clearly understood due to the lack of comprehensive observation data, especially regarding turbulence. In this study, four-layer gradient meteorological observation data and one-layer, 10-Hz ultrasonic anemometer-thermometer monitoring data from the northern side of Poyang Lake were employed to study the main features of the surface boundary layer during a strong cold-air passage over southern China. The results show that, with the passage of a cold air front, the wind speed exhibits low-frequency variations and that the wind systematically descends. During the strong wind period, the wind speed increases with height in the surface layer. Regular gust packets are superimposed on the basic strong wind flow. Before the passage of cold air, the wind gusts exhibit a coherent structure. The wind and turbulent momentum fluxes are small, although the gusty wind momentum flux is slightly larger than the turbulent momentum flux. However, during the invasion of cold air, both the gusty wind and turbulent momentum fluxes increase rapidly with wind speed, and the turbulent momentum flux is larger than the gusty wind momentum flux during the strong wind period. After the cold air invasion, this structure almost disappears.展开更多
In this paper, we present a motion segmentation approach based on the subspace segmentation technique, the genera-lized PCA. By incorporating the cues from the neighborhood of intensity edges of images, motion segment...In this paper, we present a motion segmentation approach based on the subspace segmentation technique, the genera-lized PCA. By incorporating the cues from the neighborhood of intensity edges of images, motion segmentation is solved under an algebra framework. Our main contribution is to propose a post-processing procedure, which can detect the boundaries of motion layers and further determine the layer ordering. Test results on real imagery have confirmed the validity of our method.展开更多
The non-axisymmetrical vibration of elastic circular plate resting on a layered transversely isotropic saturated ground was studied. First, the 3-d dynamic equations in cylindrical coordinate for transversely isotropi...The non-axisymmetrical vibration of elastic circular plate resting on a layered transversely isotropic saturated ground was studied. First, the 3-d dynamic equations in cylindrical coordinate for transversely isotropic saturated soils were transformed into a group of governing differential equations with 1-order by the technique of Fourier expanding with respect to azimuth, and the state equation is established by Hankel integral transform method, furthermore the transfer matrixes within layered media are derived based on the solutions of the state equation. Secondly, by the transfer matrixes, the general solutions of dynamic response for layered transversely isotropic saturated ground excited by an arbitrary harmonic force were established under the boundary conditions, drainage conditions on the surface of ground as well as the contact conditions. Thirdly, the problem was led to a pair of dual integral equations describing the mixed boundaryvalue problem which can be reduced to the Fredholm integral equations of the second kind solved by numerical procedure easily. At the end of this paper, a numerical result concerning vertical and radical displacements both the surface of saturated ground and plate is evaluated.展开更多
A layered modeling method is proposed to resolve the problems resulting from the complexity of the error model of a multi-axis motion control system. In this model, a low level layer can be used as a virtual axis by t...A layered modeling method is proposed to resolve the problems resulting from the complexity of the error model of a multi-axis motion control system. In this model, a low level layer can be used as a virtual axis by the high level layer. The first advantage of this model is that the complex error model of a four-axis motion control system can be divided into several simple layers and each layer has different coupling strength to match the real control system. The second advantage lies in the fact that the controller in each layer can be designed specifically for a certain purpose. In this research, a three-layered cross coupling scheme in a four-axis motion control system is proposed to compensate the contouring error of the motion control system. Simulation results show that the maximum contouring error is reduced from 0.208 mm to 0.022 mm and the integration of absolute error is reduced from 0.108 mm to 0.015 mm, which are respectively better than 0.027 mm and 0.037 mm by the traditional method. And in the bottom layer the proposed method also has remarkable ability to achieve high contouring accuracy.展开更多
Tomographic particle image velocimetry was used to quantitatively visualize the three-dimensional co- herent structures in the logarithmic region of the turbulent boundary layer in a water tunnel. The Reynolds number ...Tomographic particle image velocimetry was used to quantitatively visualize the three-dimensional co- herent structures in the logarithmic region of the turbulent boundary layer in a water tunnel. The Reynolds number based on momentum thickness is Reo = 2 460. The in- stantaneous velocity fields give evidence of hairpin vortices aligned in the streamwise direction forming very long zones of low speed fluid, which is flanked on either side by high- speed ones. Statistical support for the existence of hairpins is given by conditional averaged eddy within an increasing spanwise width as the distance from the wall increases, and the main vortex characteristic in different wall-normal re- gions can be reflected by comparing the proportion of ejec- tion and its contribution to Reynolds stress with that of sweep event. The pre-multiplied power spectra and two-point cor- relations indicate the presence of large-scale motions in the boundary layer, which are consistent with what have been termed very large scale motions （VLSMs）. The three dimen-sional spatial correlations of three components of veloc- ity further indicate that the elongated low-speed and high- speed regions will be accompanied by a counter-rotating roll modes, as the statistical imprint of hairpin packet structures, all of which together make up the characteristic of coherent structures in the logarithmic region of the turbulent boundary layer （TBL）.展开更多
文摘New Reynolds' mean momentum equations including both turbulent viscosity and dispersion are used to analyze atmospheric balance motions of the planetary boundary layer. It is pointed out that turbulent dispersion with r 0 will increase depth of Ekman layer, reduce wind velocity in Ekman layer and produce a more satisfactory Ekman spiral lines fit the observed wind hodograph. The wind profile in the surface layer including tur-bulent dispersion is still logarithmic but the von Karman constant k is replaced by k1 = 1 -2/k, the wind increasesa little more rapidly with height.
文摘To study the evolution of nanoparticles during Al wire electrical explosion,a nanoparticle formation model that considered layered motion was developed,and an experimental system was set up to carry out electrical explosion experiments using 0.1 mm and 0.2 mm Al wires.The characteristic parameters and evolution process during the formation of nanoparticles were calculated and analyzed.The results show that the maximum velocities of the innermost and outermost layers are about 1200 m·s-1and 1600 m·s-1,and the velocity of the middle layer is about 1400 m·s-1,respectively.Most of the nanoparticles are formed in the temperature range of2600 K-2500 K.The characteristic temperature for the formation of Al nanoparticles is~2520K,which is also the characteristic temperature of other parameters.The size distribution range of the formed nanoparticles is 18 to 110 nm,and most of them are around 22 nm.The variation of saturated vapor pressure determines the temperature distribution range of particle nucleation.There is a minimum critical diameter of particles(~25 nm);particles smaller than the critical diameter can grow into larger particles during surface growth.Particle motion has an effect on the surface growth and aggregation process of particles,and also on the distribution area of larger-diameter particles.The simulation results are in good agreement with the experiments.We provide a method to estimate the size and distribution of nanoparticles,which is of great significance to understand the formation process of particles during the evolution of wire electrical explosion.
文摘The Lagrangian equations of motion of small particle in turbulent boundary layer flows, taking into account the effects of the drug force caused by the wall presence, the Saffman and the Magus lift forces et al., is studied. Using the spectral method, analytical expression relating to the Lagrangian power spectra of particle velocity to that of the fluid are developed and the results are used to evaluate various responses statistics. In this paper, the results clearly show that the turbulent diffusivity of the particle may be larger than that of the fluid for a period of long-time.
文摘In this paper, we proposed a novel Two-layer Motion Estimation(TME) which searches motion vectors on two layers with partial distortion measures in order to reduce the overwhelming computational complexity of Motion Estimation(ME) in video coding. A layer is an image which is derived from the reference frame such that the sum of a block of pixels in the reference frame determines the point of a layer. It has been noticed on different video sequences that many motion vectors on the layers are the same as those searched on the reference frame. The proposed TME performs a coarse search on the first layer to identify the small region in which the best candidate block is likely to be positioned and then perform local refined search on the next layer to pick the best candidate block in the located small area. The key feature of TME is its flexibility of mixing with any fast search algorithm. Experimental results on a wide variety of video sequences show that the proposed algorithm has achieved both fast speed and good motion prediction quality when compared to well known as well as the state-of-the-art fast block matching algorithms.
基金supported by the National Natural Science Foundation of China (Grant Nos. 40965001 and 40875008)the open project of State Key Laboratory of Severe Weather,Chinese Academy of Meteorological Sciences (Grant No.2009LASW-A02)
文摘In southern China, cold air is a common weather process during the winter season; it can cause strong wind, sharp temperature decreases, and even the snow or freezing rain events. However, the features of the atmospheric boundary layer during cold air passage are not clearly understood due to the lack of comprehensive observation data, especially regarding turbulence. In this study, four-layer gradient meteorological observation data and one-layer, 10-Hz ultrasonic anemometer-thermometer monitoring data from the northern side of Poyang Lake were employed to study the main features of the surface boundary layer during a strong cold-air passage over southern China. The results show that, with the passage of a cold air front, the wind speed exhibits low-frequency variations and that the wind systematically descends. During the strong wind period, the wind speed increases with height in the surface layer. Regular gust packets are superimposed on the basic strong wind flow. Before the passage of cold air, the wind gusts exhibit a coherent structure. The wind and turbulent momentum fluxes are small, although the gusty wind momentum flux is slightly larger than the turbulent momentum flux. However, during the invasion of cold air, both the gusty wind and turbulent momentum fluxes increase rapidly with wind speed, and the turbulent momentum flux is larger than the gusty wind momentum flux during the strong wind period. After the cold air invasion, this structure almost disappears.
文摘In this paper, we present a motion segmentation approach based on the subspace segmentation technique, the genera-lized PCA. By incorporating the cues from the neighborhood of intensity edges of images, motion segmentation is solved under an algebra framework. Our main contribution is to propose a post-processing procedure, which can detect the boundaries of motion layers and further determine the layer ordering. Test results on real imagery have confirmed the validity of our method.
基金Project supported by the National Natural Science Foundation of China(No.50678108)the Natural Science Foundation of Zhejiang Province(No.Y106264 )
文摘The non-axisymmetrical vibration of elastic circular plate resting on a layered transversely isotropic saturated ground was studied. First, the 3-d dynamic equations in cylindrical coordinate for transversely isotropic saturated soils were transformed into a group of governing differential equations with 1-order by the technique of Fourier expanding with respect to azimuth, and the state equation is established by Hankel integral transform method, furthermore the transfer matrixes within layered media are derived based on the solutions of the state equation. Secondly, by the transfer matrixes, the general solutions of dynamic response for layered transversely isotropic saturated ground excited by an arbitrary harmonic force were established under the boundary conditions, drainage conditions on the surface of ground as well as the contact conditions. Thirdly, the problem was led to a pair of dual integral equations describing the mixed boundaryvalue problem which can be reduced to the Fredholm integral equations of the second kind solved by numerical procedure easily. At the end of this paper, a numerical result concerning vertical and radical displacements both the surface of saturated ground and plate is evaluated.
基金Project(51005086)supported by the National Natural Science Foundation of ChinaProject(2010MS085)supported by the Fundamental Research Funds for the Central Universities,ChinaProject(DMETKF2013008)supported by the Open Project of the State Key Laboratory of Digital Manufacturing Equipment and Technology,China
文摘A layered modeling method is proposed to resolve the problems resulting from the complexity of the error model of a multi-axis motion control system. In this model, a low level layer can be used as a virtual axis by the high level layer. The first advantage of this model is that the complex error model of a four-axis motion control system can be divided into several simple layers and each layer has different coupling strength to match the real control system. The second advantage lies in the fact that the controller in each layer can be designed specifically for a certain purpose. In this research, a three-layered cross coupling scheme in a four-axis motion control system is proposed to compensate the contouring error of the motion control system. Simulation results show that the maximum contouring error is reduced from 0.208 mm to 0.022 mm and the integration of absolute error is reduced from 0.108 mm to 0.015 mm, which are respectively better than 0.027 mm and 0.037 mm by the traditional method. And in the bottom layer the proposed method also has remarkable ability to achieve high contouring accuracy.
基金supported by the National Natural Science Foundation of China (10832001 and 10872145)the State Key Laboratory of Nonlinear Mechanics,Institute of Mechanics,Chinese Academy of Sciences
文摘Tomographic particle image velocimetry was used to quantitatively visualize the three-dimensional co- herent structures in the logarithmic region of the turbulent boundary layer in a water tunnel. The Reynolds number based on momentum thickness is Reo = 2 460. The in- stantaneous velocity fields give evidence of hairpin vortices aligned in the streamwise direction forming very long zones of low speed fluid, which is flanked on either side by high- speed ones. Statistical support for the existence of hairpins is given by conditional averaged eddy within an increasing spanwise width as the distance from the wall increases, and the main vortex characteristic in different wall-normal re- gions can be reflected by comparing the proportion of ejec- tion and its contribution to Reynolds stress with that of sweep event. The pre-multiplied power spectra and two-point cor- relations indicate the presence of large-scale motions in the boundary layer, which are consistent with what have been termed very large scale motions （VLSMs）. The three dimen-sional spatial correlations of three components of veloc- ity further indicate that the elongated low-speed and high- speed regions will be accompanied by a counter-rotating roll modes, as the statistical imprint of hairpin packet structures, all of which together make up the characteristic of coherent structures in the logarithmic region of the turbulent boundary layer （TBL）.
