Wheel wear comparison between motor car and trailer of intercity train

To analyze wheel wear discrepancy between motor car and trailer of an intercity train,a novel wheel wear rates calculation model was proposed,which was composed of the intercity train dynamics model,wheel-rail three-dimensional rolling contact FEM model and the wear model.The simulated results were contrasted with measured results in field test.The simulated results showed the motor car wheels had larger rotation rate and longitudinal creepage than the trailer wheels.Meanwhile,the motor car wheels encountered larger vertical forces and longitudinal forces from bogie because of the heavier car body and the impact of traction torque.The traction torque acting on motor car wheel could increase the slip rates in the rear part of wheel contact patch and weaken the spinning phenomenon of relative slip.Larger contact pressure and slip rates caused the higher wear rates of motor car wheel than those of trailer wheel.The overall trends of wheel wear depth in simulated and tested results were similar.And they both showed the motor car wheel encountered the more serious wear than the trailer wheel.These models can be used to study the effect of the traction characteristics curves on the wear of wheel.

Technological Analysis on Motor Stall and Its Perspective

The brush lock is due to assembly tightly during assembling three gripper so that it curls after some time in motor and bare motors.The motor happen to have current decreasing and cause rotary too slowly is an important technique problem.At last the motor hasn’t worked due to disconnection.It give company to bring assembly issue for customers.So the motor stall is main issue in motor working.We shall pay more attention to it necessarily and shall be strict quality inspection and we shall monitor the flow line for the sake of decreasing it.We shall solve the problem as soon as possible and communicate with the customer engineers.Unloaded rotation is radical in the base inspection.The engineer need to negotiate with supplying engineers for the qualified material of brush.Increasing inspection into more times is a method to decrease unqualified brushes.Some experiment method is explained to analyze for customer engineers.Two kinds of motors ie.stepping and asynchronous motor and motors used in future in car is explained to further knowledge to motor’s application.Such as the experiment with torque,voice and electric voltage converter.The pseudo soldering results the slow rotary.The reverse voltage is a reason for a motor to slow rotary even stall.