Surface movement and deformation characteristics due to high- intensive coal mining in the windy and sandy region

As China＇s energy strategy moving westward, the surface movement and deformation characteristics due to high-intensive coal mining in the windy and sandy region become a research hotspot. Surface movement observation stations were established to monitor movement and deformation in one super-large working face. Based on field measurements, the surface movement and deformation characteristics were obtained, including angle parameters, subsidence prediction parameters, etc. Besides, the angle and subsidence prediction parameters in similar mining areas are summarized; the mechanism of surface movement and deformation was analyzed with the combination of key stratum theory, mining and geological conditions. The research also indicates that compared with conventional working faces, uniform subsidence area of the subsidence trough in the windy and sandy region is larger, the trough margins are relative steep and deformation values present convergence at the margins, the extent of the trough shrink towards the goaf and the influence time of mining activities lasts shorter; the overlying rock movement and breaking characteristics presents regional particularity in the study area, while the single key stratum, thin bedrock and thick sand that can rapidly propagate movement and deformation are the deep factors, contributing to it.

Research of prediction for mine earthquake basing on underground rock's movement and deformation mechanism

Movement and deformation of underground rock include vertical dislocation and horizontal deformation,and the energy released by mine earthquake can be calculated basing on deformation energy.So put forwards the prediction for degree and spread of mine earthquake according to the underground rock's movement and deformation.The actual number of times and spread of mine earthquake on site were greatly identical to the prediction.The practice proves the possibility of prediction for mine earthquake basing on the analysis of underground rock's movement and deformation,and sets up new approach of mine earthquake prediction.

Hazard development mechanism and deformation estimation of water solution mining area

Based on the hazard development mechanism, a water solution area is closely related to the supporting effect of pressure-bearing water, the relaxing and collapsing effect of orebody interlayer, the collapsing effect of thawless material in orebody, filling effect caused by cubical expansibility of hydrate crystallization and uplifting effect of hard rock layer over cranny belt. The movement and deformation of ground surface caused by underground water solution mining is believed to be much weaker than that caused by well lane mining, which can be predicted by the stochastic medium theory method. On the basis of analysis on the engineering practice of water solution mining, its corresponding parameters can be obtained from the in-site data of the belt water and sand filling mining in engineering analog approach.

Monitoring crustal movements in northern Tianshan Mountain based on GPS technology

Monitoring results for the period 2009-2014 by ten standard GPS stations allowed to determine the crustal movements of seismically active region in south-eastern Kazakhstan. Maps of movement velocity were made in geocentric coordinate system and in reference system of the Eurasian continent. GPS points displacements reflect the features of modern deformation processes that are notable in the high seismic activity region. The structure of the velocity field divergence qualitatively confirms major deformation in the sublatitudinal direction which is parallel to the main ridge of the northern Tianshan Mountain. The epicenters of earthquakes are in agreement with the border areas of compression -tension, as well as the allocated areas of multidirectional rotary motion. The conclusion is that GPS monitoring of the movements of the Earth＇s crust can be used to evaluate the territory＇s stress-strain state for the purpose of seismic zoning and seismic risk assessment.

Current tectonic deformation and seismogenic characteristics along the northeast margin of Qinghai -Xizang block

Based on the data from repeated precise leveling and across-fault deformation measurements carried out in recent 30 years and the analyzed results from GPS observations made in recent years along the northeastern margin of Qinghai-Xizang block, and combined with the geological structures and seismic activities, some characteristics in regional tectonic deformation and strong earthquake development are studied and approached preliminarily. The results show that: a) The space-time distribution of current tectonic deformation in this area is inhomogeneous with relatively intensive tectonic deformation in the vicinity of main boundary faults and weak deformation in the farther areas. The intensity of vertical differential movement and the deformation status vary with time, and the horizontal movement and deformation are characterized by apparent compression and strike-slip. b) The tectonic stress field generated by the NE-trending continuous compressive movement of Qinghai-Xizang block due to the northward press and collision of India plate is the principal stress for the tectonic deformation and earthquake development in this area. The evolution of space-time distribution of tectonic deformation and seismicity is closely related to the block activity and dynamic evolution of regional tectonic stress field. c) The vertical deformation uplift and high-gradient deformation zones and the obvious fault deformation anomaly appeared along the boundaries of tectonic blocks can be considered as the indicators of hindered block motion and intensified tectonic stress field for strong earthquake development. Usually, the above-mentioned phenomena would be followed by the seismicity of M6.0, but the earthquake might not occur in the place with the maximum movement. The zones with the fault deformation anomaly characterized by tendencious accumulation acceleration turning and the surrounding areas might be the positions for accumulation of strain energy and development and occurrence of strong earthquakes.

Research on Ground Movement Laws for Strip Mining Under Thick Alluvium

With the discrete element method, the simulation and analysis of a series of numerical models were made. This research revealed ground movement laws for strip mining under thick alluvium and gave calculation formulae for the maximum ground subsidence and horizontal movement as a function of basement rock thickness and mining width, thus providing sound evidence for future strip mining under thick alluvium.

Subsidence rules of underground layer thickness： Lu＇an Coal Base coal mines for different soil as an example, China

Damage caused by underground coal mining is a serious problem in mining areas in China; therefore, studying and obtaining the rules of ground movement and deformation under different geological conditions is of great importance. The numerical software ANSYS was used in this study to simulate mining processes under two special geological conditions： （1） thick unconsolidated soil layer and thin bedrock; （2） thin soil layer and thick bedrock. The rules for ground movement and deformation for different soil layer to bedrock ratios were obtained. On the basis of these rules, a prediction parameter modified model of the influence function was proposed, which is suitable for different values of unconsolidated soil layer thickness. The prediction results were verified using two sets of typical field data.

Shanghai center project excavation induced ground surface movements and deformations

Empirical data on deep urban excavations can provide designers a significant reference basis for assessing potential deformations of the deep excavations and their impact on adjacent structures. The construction of the Shanghai Center involved excavations in excess of 33-m-deep using the top-down method at a site underlain by thick deposits of marine soft clay. A retaining system was achieved by 50-m-deep diaphragm walls with six levels of struts. During construction, a comprehensive instrumentation program lasting 14 months was conducted to monitor the behaviors of this deep circular excavation. The following main items related to ground surface movements and deformations were collected： （1） walls and circumferential soils lateral movements; （2） peripheral soil deflection in layers and ground settlements; and （3） pit basal heave. The results from the field instrumentation showed that deflections of the site were strictly controlled and had no large movements that might lead to damage to the stability of the foundation pit. The field performance of another 21 cylindrical excavations in top-down method were collected to compare with this case through statistical analysis. In addition, numerical analyses were conducted to compare with the observed data. The extensively monitored data are characterized and analyzed in this paper.

Discussion on the relationship between the Yanshanian Movement and cratonic destruction in North China

The relationship between the Yanshanian Movement, destruction of the North China Craton(NCC), and subduction of the western Pacific plate is crucial to reconstructing the middle-late Mesozoic tectonic evolution of the eastern Asian continent and margin. The Yanshanian Movement was a globally important change in crustal tectonics during the Middle-Late Jurassic.Previous research has systematically studied the formation and evolution of the Yanshanian Movement, focusing on the timing and location of tectonic movements, and the sedimentary and volcanic strata. However, the question of whether the tectonic activity occurred globally, and the characteristics of the Yanshanian Movement remain debated. The main argument is that if a tectonic movement can only be characterized by a regional or local disconformity, and if the tectonic movement occurred in an intracontinental setting, with extensive deformation but with no disconformity despite volcanic eruptions and magmatic intrusions, accompanied by changes in crustal structure and composition, should it be defined as a tectonic event or process? This question requires further analysis. The main aim of this study is to distinguish whether the Yanshanian Movement is a local feature of the eastern Asian continent, or a global tectonic event related to subduction of the Pacific Plate. In this paper, based on previous research, we discuss the spatial and temporal evolution of the Yanshanian Movement, the controlling tectonic mechanisms, and its relationship to the reactivation and destruction of the NCC and the subduction of the western Paleo-Pacific slab.We emphasize that the Yanshanian Movement in the Middle-Late Jurassic is distinct from the lithospheric thinning responsible for Early Cretaceous extension and magmatism related to the destruction of the NCC. The various tectonic stages were constrained by different dynamics and tectonic settings, or by different tectonic events and processes. Therefore, it is possible that the deformation and reactivation of the NCC contributed to its destruction, in addition to lithospheric thinning. Finally, we discuss whether the Yanshanian Movement was associated with the destruction of the NCC.

Slumping in the Upper Jurassic Baisakhi Formation of the Jaisalmer Basin, western India: Sign of synsedimentary tectonics?

A spectacularly exposed slump is described from a 120-m-long road cut between the villages of Kanod and Deva in the northeastern Jaisalmer Basin of Rajasthan,India.The Upper Jurassic part of the sediments at the outcrop was formed in a near-shore setting and belongs to the Ludharwa Member of the Baisakhi Formation.The 3-m-thick unit shows a number of asymmetric folds and thrust faults leading to an imbrication of partly lithified sandstone beds.The deformation structures allow the reconstruction of a movement towards the northwest.This agrees well with the basin configuration that shows a deepening into this direction.Although the determination of a specific trigger mechanism is difficult for soft-sediment deformation structures,an earthquake caused by synsedimentary tectonics in the basin seems to be the most likely explanation.