TRULY BALANCED PULSE GENERATOR USING MICROWAVE TRANSISTOR AND SRD

A novel efficient circuit for Ultra-WideBand(UWB) balanced sub-nanosecond monocycle pulse generation is presented.The pulse generator employs wideband bipolar transistor,step recovery diodes,Schottky diodes,and simple charging and discharging circuitry.Simple transient analysis and design of the circuit are presented along with their operating principle.The pulse generator produces truly balanced monocycle pulse with 500 ps pulse-width and 800 mV peak voltage.The generated monocycle pulse also has very symmetrical positive and negative portions and low ringing level.The presented pulse generator can be used as both a transmitter feeding UWB balanced antennas without broadband baluns and a balanced switching pulse generator that used in UWB receiver.

Coal analysis using the pulsed neutron generator

A prototype of elemental analyzer for coal has been developed by using a PFTNA (pulse fast thermalneutron analysis) system. The PFTNA technology is based on the reactions such as (n, γ), (n, n'γ), (n, Pγ), etc. byexamining the characteristic gamma rays emitted. In our prototype a pulsed neutron generator provides 14 MeV pulseneutrons, which contribute to the separation of spectrum Ⅱ (the sum of capture and activation spectrum) fiom spec-trum Ⅰ (the sum of inelastic, capture and activation spectrum), and thus to the measurement of C and O contents incoal. Data management is completed by computer program using the least-square regression method. The experimentin Changshan Power Plant for 3 months showed that the precision of calorific value, whole water, volatile content andash content is 0.5 k J/kg, 1.0 wt%, 2.0 wt% and 1.5 wt%, respectively.

Sub-ns Jitter, 1ns Risetime and 10 kV Rectangular Pulse Trigger Generator

A new rectangular pulse trigger generator has been developed which can generate two 10 kV pulses with a risetime less than 1 ns, a jitter of 0.2 ns and a width of about 10 ns and 40 ns, respectively. This generator uses two polymer-foil switches and 25 ohm Blumlein transmission lines composed of two-parallel standard coaxial cables discharging into two 50 ohm output cables. The pulse width and the delay between two pulses can be adjusted by changing the length of the cables.

An All Solid-State Pulsed Power Generator for Plasma Immersion Ion Implantation (PⅢ)

An all solid-state pulsed power generator for plasma immersion ion implantation （PIII） is described. The pulsed power system is based on a Marx circuit configuration and semi- conductor switches, which have many advantages in adjustable repetition frequency, pulse width modulation and long serving life compared with the conventional circuit category, tube-based technologies such as gridded vacuum tubes, thyratrons, pulse forming networks and transformers. The operation of PIII with pulse repetition frequencies up to 500 Hz has been achieved at a pulse voltage amplitude from 2 kV to 60 kV, with an adjustable pulse duration from 1 μs to 100 μs. The proposed system and its performance, as used to drive a plasma ion implantation chamber, are described in detail on the basis of the experimental results.

A Flexible Multichannel Digital Random Pulse Generator Based on FPGA

The present paper describes a multichannel digital random pulse generator implemented in a 65-nm FPGA device. The random time interval generation is based on inverse transformation method. The output pulse generation rate, pulse width and the probability distribution function (PDF) of each channel might be individually selected by the computer through a USB cable connection. Statistical properties of the output channels can be adjusted and recorded in a fully dynamic flexible manner. The Poisson and uniform PDFs were tested and implemented for up to eight different channels in experiment, however, the implementation of any arbitrary PDF is possible by programming capability of the device as well. Detailed experimental results are expressed in the manuscript. The proposed equipment makes it possible to verify the complicated multichannel detection systems without having the radioactive experimental tests. This is a low cost instrumentation due to the FPGA-based construction.

Design and Construction of Compact Repetitive Nanosecond Pulse Generator Based on Tesla Transformer

A compact high-voltage repetitive nanosecond pulse generator(HRNPG)was developed for studying the technology of repetitive nanosecond pulse technology and its related application.The HRNPG mainly consists of a repetitive charging module,a Tesla transformer and a sharpening switch.With its voltage lower than 1 kV,the primary repetitive charging circuit comprises two fast thyristors as its low-voltage switches.The spiral Tesla transformer acts as the main step-up component,and its peak transformation ratio is designed to be more than 100.A self-breakdown spark switch,i.e.the sharpening switch,is used to sharpen the output of the transformer and to generate nanosecond pulses.The HRNPG prototype is capable of generating pulses of 100 kV in peak with rise time 30 ns and the maximum repetition rate of 500 Hz on a 6 k load.Experimental results show,without any magnetic core,the developed Tesla transformer prototype can easily output high voltage while keeping itself small in size and light in weight,which is of significance for the compactness and portability of the pulse generator.The N2-insulated spark switch operated well at voltage close to 100 kV and the repetition rate within several hundreds of hertz.

Generalized equation for calculating rock cutting efficiency by pulsed water jets

One of the promising methods for rock cutting technology is the use of high-speed water jets.In order to improve the cutting capacity of water jets without increasing the hydraulic power of equipment,pulsed water jets are basically used to increase the rock cutting efficiency.However,there are no mature recommendations for selection of rational parameters,and the relationship between indicators of rock cutting efficiency and parameters of pulsed water jet is still not established.In this context,we aimed at developing a generalized equation for calculating rock cutting efficiency,in which all the major parameters in consideration of rock cutting process are included.Then,a calibration of the rational parameters of rock cutting by pulsed water jets was conducted.The results are likely helpful for increasing productivity and reducing energy consumption.

CONTROL STRATEGY FOR ELECTRO-HYDRAULIC POSITION SERVO SYSTEM WITH GENERALIZED PULSE CODE MODULATION

A hybrid control strategy has been designed and developed for the electro-hydraulic posi-tion servo control system with generalized Pulse code modulation （GPCM）, which is suitable for the area where the work condition is poor and a large flow rate is required. It is difficult to control the GPCM system because the system is discrete. With consideration of the stability and speediness of the GPCM position servo control system, a control strategy is developed through the theoretical and ex-perimental analyses. The control strategy integrates the merits of Bang-Bang control, PID control and fuzzy control. With this hybrid control strategy, the electro hydraulic control system has good per-formances, and the servo control is carried out with GPCM through on-off valves.

The nonlinear response of Cattaneo-type thermal loading of a laser pulse on a medium using the generalized thermoelastic model

The nonlinear thermoelastic responses of an elastic medium exposed to laser generated shortpulse heating are investigated in this article. The thermal wave propagation of generalized thermoelastic medium under the impact of thermal loading with energy dissipation is the focus of this research. To model the thermal boundary condition(in the form of thermal conduction),generalized Cattaneo model(GCM) is employed. In the reference configuration, a nonlinear coupled Lord-Shulman-type generalized thermoelasticity formulation using finite strain theory(FST) is developed and the temperature dependency of the thermal conductivity is considered to derive the equations. In order to solve the time-dependent and nonlinear equations, Newmark’s numerical time integration technique and an updated finite element algorithm is applied and to ensure achieving accurate continuity of the results, the Hermitian elements are used instead of Lagrangian’s. The numerical responses for different factors such as input heat flux and nonlinear terms are expressed graphically and their impacts on the system’s reaction are discussed in detail.The results of the study are presented for Green–Lindsay model and the findings are compared with Lord-Shulman model especially with regards to heat wave propagation. It is shown that the nature of the laser’s thermal shock and its geometry are particularly determinative in the final stage of deformation. The research also concluded that employing FST leads to achieving more accuracy in terms of elastic deformations;however, the thermally nonlinear analysis does not change the results markedly. For this reason, the nonlinear theory of deformation is required in laser related reviews, while it is reasonable to ignore the temperature changes compared to the reference temperature in deriving governing equations.

Extension of high-order harmonics and generation of an isolated attosecond pulse in the chirped laser field

This paper theoretically investigates the high-order harmonic generation cutoff extension using intense few-cycle linearly chirped laser pulses. It shows that the cutoff of the harmonic can be extended remarkably by optimising the chirping parameters. The time-frequency characteristics of high-order harmonics with different chirping parameters are analysed by means of wavelet transform of the dipole acceleration. It also gives out the classical three-step model pictures of electron. By superposing a properly selected range of the harmonic spectrum, it obtains an isolated 65as pulse.

Broadband mid-infrared pulse via intra-pulse difference frequency generation based on supercontinuum from multiple thin plates

We report on the generation of optical pulses with a nearly one octave-spanning spectrum ranging from 1300 nm to2500 nm at 1 kHz repetition rate, which are based on intra-pulse difference frequency generation(DFG) in β-barium borate crystal(β-BBO) and passively carrier-envelope-phase(CEP) stabilized. The DFG is induced by few-cycle pulses initiated from spectral broadening in multiple thin plates driven by a Ti: sapphire chirped-pulse amplifier. Furthermore, a numerical simulation is developed to estimate the conversion efficiency and output spectrum of the DFG. Our results show that the pulses from the DFG have the potential for seeding intense mid-infrared(MIR) laser generation and amplification to study strong-field physics and attosecond science.

Generating femtosecond coherent X-ray pulses in a diffractionlimited storage ring with the echo-enabled harmonic generation scheme

To study ultrafast processes at the sub-picosecond level, novel methods based on coherent harmonic generation technologies have been proposed to generate ultrashort radiation pulses in existing ring-based light sources. Using the High Energy Photon Source as an example, we numerically test the feasibility of implementing one coherent harmonic generation technology, i.e.,the echo-enabled harmonic generation(EEHG) scheme, in a diffraction-limited storage ring(DLSR). Two different EEHG element layouts are considered, and the effect of the EEHG process on the electron beam quality is also analyzed. Studies suggest that soft X-ray pulses, with pulse lengths of a few femtoseconds and peak powers of up to1 MW, can be generated by using the EEHG scheme, while causing little perturbation to the regular operation of a DLSR.

Generation of Broadband Attosecond Pulse via Controlling Quantum Path by Two Color Field in Long Wavelength Driving Regime

在这份报纸，我们理论上在通过解决时间依赖者 Schr 在 2000 nm 驾驶政体的长波长调查了高泛音产生表格氦原子 ? dinger 方程。由把第二泛音脉搏( 1000 nm )和紫外 attosecond 脉搏( 200 nm )加到开车的地，为选出并且提高电离路径产生产量很高的 supercontinuum 泛音的一个有效方法被认识到，然后孤立的 sub-100 显著地作为有 190 eV 的带宽的脉搏被获得。

High-order harmonic generation with a two-color laser pulse

We theoretically investigate the electron dynamics of the high-order harmonics generation process by combining a near-infrared 800 nm driving pulse with a mid-infrared 2000 nm control field. We also investigate the emission time of harmonics using time-frequency analysis to illustrate the physical mechanisms of high-order harmonic generation. We calculate the ionization rate using the Ammoso Delone-Krainov model and interpret the variations in harmonic intensity for different control field strengths and delays. We find that the width of the harmonic plateau can be extended when the control electric field is added, and a supercontinuum from 198 to 435 eV is generated, from which an isolated 61-as pulse can be directly obtained.

Isolated sub-30-attosecond pulse generation using a multicycle two-color chirped laser and a static electric field

We present a theoretical investigation of high-order harmonic generation in a chirped two-color laser field, which is synthesized by a 10-fs/800-nm fundamental chirped pulse and a 10-fs/1760-nm subharmonic pulse. It is shown that a supercontinuum can be produced using the multicycle two-color chirped field. However, the supercontinuum reveals a strong modulation structure, which is not good for the generation of an isolated attosecond pulse. By adding a static electric field to the multicycle two-color chirped field, not only the harmonic cutoff is extended remarkably, but also the quantum paths of the high-order harmonic generation （HHG） are modified significantly. As a result, both the extension of the supercontinuum and the selection of a single quantum path are achieved, producing an isolated 23-as pulse with a bandwidth of about 170.6 eV. Furthermore, the influences of the laser intensities on the supercontinuum and isolated attosecond pulse generation are investigated.

Generation of an isolated sub-30 attosecond pulse in a two-color laser field and a static electric field

We theoretically investigate high-order harmonic generation（HHG） from a helium ion model in a two-color laser field,which is synthesized by a fundamental pulse and its second harmonic pulse.It is shown that a supercontinuum spectrum can be generated in the two-color field.However,the spectral intensity is very low,limiting the application of the generated attosecond（as） pulse.By adding a static electric field to the synthesized two-color field,not only is the ionization yield of electrons contributing to the harmonic emission remarkably increased,but also the quantum paths of the HHG can be significantly modulated.As a result,the extension and enhancement of the supercontinuum spectrum are achieved,producing an intense isolated 26-as pulse with a bandwidth of about 170.5 eV.In particular,we also analyse the influence of the laser parameters on the ultrabroad supercontinuum spectrum and isolated sub-30-as pulse generation.

Quantum path control and isolated attosecond pulse generation in the combination of near-infrared and terahertz pulses

We present an efficient and realizable scheme for the generation of an ultrashort single attosecond（as） pulse from H atom with a 800-nm fundamental laser field combined with a terahertz（THz） field. The high-order harmonic generation（HHG） can be obtained by solving the time-dependent Schr dinger equation accurately and efficiently with time-dependent generalized pseudo-spectral（TDGPS） method. The result shows that the plateau of high-order harmonics is extended and the broadband spectra can be produced by the combined laser pulse, which can be explained by the corresponding ionization probability. The time–frequency analysis and semi-classical three-step model are also presented to further investigate this mechanism. Besides, by the superposition of the harmonics near the cutoff region, an isolated 133-as pulse can be obtained.

Generation of the wavelength-tunable XUV pulse using the two-color and three-color infrared pulses

We present an efficient method to generate an ultrashort wavelength-tunable XUV pulse by using the harmonic selec- tive enhancement scheme. The results show that by properly controlling the delay times of a two-color field or a three-color field, selective enhancement of the harmonics with photon energies between 80 eV and 315 eV can be obtained. Fur- ther, a wavelength-tunable and bandwidth-controllable XUV radiation can be obtained by Fourier transformation of these enhanced harmonics.

Generalized Thermoelasticity Problem of Material Subjected to Thermal Loading Due to Laser Pulse

This work is devoted to a study of the induced temperature and stress fields in an elastic half space in context of clas-sical coupled thermoelasticity and generalized thermoelasticity in a unified system of equations. The half space is con-sidered to be made of an isotropic homogeneous thermoelastic material. The bounding plane surface is heated by a non-Gaussian laser beam with pulse duration of 2 ps. An exact solution of the problem is first obtained in Laplace transform space. Since the response is of more interest in the transient state, the inversion of Laplace transforms have been carried numerically. The derived expressions are computed numerically for copper and the results are presented in graphical form.