Fault Diagnosis for Buckling Friction Components in Wet Multi-Disc Clutches Using IHHT

The wet multi-disc clutches are extensively used in various transmission systems,withone of the most prevalent failure modes being the buckling deformation of friction components.Animproved Hilbert-Huang transform method(IHHT)is proposed to address the limitations of tradi-tional time-domain vibration analyses,such as low accuracy and mode mixing.This paper first clas-sifies the buckling degree of the friction components.Next,wavelet packet transform(WPT)isapplied to the vibration signals of different buckling plates to partition them into distinct fre-quency bands.Then,the instantaneous features are extracted by empirical mode decomposition(EMD)and Hilbert transform(HT)to discarding extraneous intrinsic mode function(IMF)com-ponents.Comparative analyses of Hilbert spectral entropy and time-domain features confirm theenhanced precision of IHHT under specific classifiers,which is better than traditional methods.

Drag Torque Prediction Model for the Wet Clutches

Reduction of drag torque in disengaged wet clutch is one of important potentials for vehicle transmission improvement. The flow of the oil film in clutch clearance is investigated. A three-dimension Navier-Stokes(N-S) equation based on laminar flow is presented to model the drag torque. Pressure and speed distribution in radial and circumferential directions are deduced. The theoretical analysis reveals that oil flow acceleration in radial direction caused by centrifugal force is the key reason for the shrinking of oil film as constant feeding flow rate. The peak drag torque occurs at the beginning of oil film shrinking. A variable is introduced to describe effective oil film area and drag torque after oil film shrinking is well evaluated with the variable. Under the working condition, tests were made to obtain drag torque curves at different clutch speed and oil viscosity. The tests confirm that simulation results agree with test data. The model performs well in the prediction of drag torque and lays a theoretical foundation to reduce it.

Research on Drag Torque Prediction Model for the Wet Clutches

Considering the surface tension effect and centrifugal effect, a mathematical model based on Reynolds equation for predicting the drag torque of disengage wet clutches is presented. The model indicates that the equivalent radius is a function of clutch speed and flow rate. The drag torque achieves its peak at a critical speed. Above this speed, drag torque drops due to the shrinking of the oil film. The model also points out that viscosity and flow rate effects on drag torque. Experimental results indicate that the model is reason-able and it performs well for predicting the drag torque peak.

Running‑In Behavior of Wet Multi‑plate Clutches:Introduction of a New Test Method for Investigation and Characterization

Wet multi-plate clutches are relevant components of modern drivetrain applications,not only in terms of function but also safety and comfort.Especially at the beginning of their lifetime,distinct changes of the friction behavior may occur and make the actuation of the clutch challenging.This transcript describes the typical running-in behavior of wet multi-plate clutches and gives a general definition for running-in of clutches.Moreover,a new test method to systematically investigate the running-in behavior of clutches is introduced.This test method contains a test procedure to characterize the running-in behavior on different load levels.Furthermore,a multi-stage procedure to evaluate and characterize the running-in behavior of clutches with mathematical approaches and new characteristic values is given.The quality of the test method is demonstrated on the example of three different tribological systems from dual clutch transmissions(DCT)and automatic transmissions(AT)application using paper friction linings.

函数展开计数在CLUTCH方法中的初步应用

反复裂变几率(IFP)方法广泛应用于求解k特征值对连续能量核数据的灵敏度系数,然而IFP方法存在内存占用大的问题,因此CLUTCH方法被提出以解决该问题。但对于大规模问题,如压水堆全堆问题,基于网格的CLUTCH(CLUTCH-Mesh)方法存在权重函数不易收敛的问题。本文采用函数展开计数(FET)方法对CLUTCH方法中的权重函数进行统计(CLUTCH-FET)以解决该问题,函数展开计数选取的基函数是勒让德多项式。本文在蒙特卡罗粒子输运计算程序NECP-MCX中实现了IFP、CLUTCH-Mesh和CLUTCH-FET 3种方法,以IFP方法的计算结果作为参考解,对CLUTCH-Mesh和CLUTCH-FET方法的精度和效率进行了验证。数值结果表明:对于小规模问题,如Godiva和Flattop问题,CLUTCH-Mesh和CLUTCH-FET方法具有与IFP方法相当的精度,且计算效率较IFP方法更高;对于大规模问题,如AP1000全堆问题,CLUTCH-Mesh方法的计算精度下降,而CLUTCH-FET方法可保持较高的精度和计算效率,CLUTCH-FET方法的品质因子较IFP方法和CLUTCH-Mesh方法分别最多提高了5.2和6.0倍。

Modeling and simulation of the static characteristics of diaphragm spring clutches

The diaphragm spring clutch static characteristics to improve the starting quality for cars equipped with automated mechanical transmission （AMT） were modeled and simulated. First, axial stiffness of clutch cushion spring and characteristic curves of diaphragm spring were theoretically and experimentally studied. Then, model of transfer characteristics of the normal force was built, with special conscen on the abrasion of friction discs and the influence of temperature to diaphragm spring. Finally, the model was tested in practical starting for cars equipped with AMT, which showed that the starting quality was significantly improved. The experimental results showed that the proposed model was precise enough to be implemented conveniently.

Transient dynamic analysis and comparison on wedging processes of overrunning clutches with different contact surfaces

The effects of contact surface on dynamic wedging behavior of the roller and inner-ring of the overrunning clutch in a dual-turbine torque converter were investigated to reveal the friction self- locking mechanism and dynamic process. Planar strain clutch models including roller, inner-ring and outer-ring were built, and transient wedging process was analyzed with an explicit dynamics meth- od. The modeling of stress and strain distribution and variation of two kinds of contact surfaces show that there are three stages named slipping, wedging and binding respectively during whole wed- ging process. Meanwhile the geometric structures of contact surfaces greatly influence the peak stress and strain distribution of the wedging process of the roller and inner-ring. The load bearing performance of contact surfaces with logarithmic spiral curve is better than that with straight line. Our study provides theoretical foundation for design and further optimization of wedging contact surface of an overrunning clutch in a dual-turbine hydrodynamic torque converter.

Modeling and simulation of Cobot based on double over-running clutches

In order to analyze characteristics of Cobot cooperation with a human in a shared workspace, the model of a non-holonormic constraint joint mechanism and its control model were constructed based on double over-running clutches. The simulation analysis was carried out and it validated passive and constraint features of the joint mechanism. In terms of Cobot components, the control model of Cobot following a desired trajectory was built up. The simulation studies illustrate that the Cobot can track a desired trajectory and possess passive and constraint features ; a human supplies operation force that makes Cobot move, and a computer system con- trois its motion trajectory. So it can meet the requirements of Cobot collaboration with an operator. The Cobot model can be used in applications of material moving, parts assembly and some situations requiring man-machine cooperation and so on.

Large-brained birds lay smaller but heavier clutches

The brain is among the most energetically costly organs in vertebrates,and thus trade-offs have been hypothesized to exert constraints on brain size evolution.The energy trade-off hypothesis(ETH) predicts that reducing the energy consumption of reproduction or other costly tissues should compensate for the cost of a large brain.Egg production in birds requires a large proportion of the total energy budget,and a clutch mass in some bird species can outweigh the body mass of the female.To date,this hypothesis has mainly been tested in mammals and ectothermic animals such as anurans and fishes.We collated data on adult brain size,body mass and eggproduction traits such as clutch size,egg mass and annual broods from published studies,and conducted a phylogenetic comparative test of the interplay between egg-production investment and brain size evolution across bird species.After controlling for phylogenetic relationships and body size,we find a negative correlation between brain size and clutch size across 1395 species,which favored ETH.However,when egg mass was integrated in models,positive associations were detected between brain size and mass of eggs(via egg mass,clutch mass and annual total egg mass).Our results suggest that brain size trades off against egg-production only via certain aspects(e.g.,clutch size).By contrast,a positive relationship between brain size and total egg reproduction(e.g.,clutch mass and annual total egg mass) implied increased total energy budget outweighing energy allocation across bird species.Our study shows that there is no general energy trade-off between brain size and eggreproduction investment,and suggests that brain size evolution follows mixed strategies across bird species.

Experimental and Theoretical Analysis of the Drag Torque in Wet Clutches

Traditional mathematical models cannot predict and explain the phenomenon by which the drag torque(DT)in wet clutches rises in the high-speed zone.In order to evaluate the DT in such conditions,a two-phase air-fluid mathematical model for a DT with grooves was elaborated.The mathematical model was based on the theory of viscous fluid flow.A two-phase volume of fluid model was also used to investigate the distribution and volume fraction of air and fluid.Experiments on three friction plates with different grooves were conducted to validate the resulting mathematical model.It was found that the gap between plates decreased in the high-speed zone,thereby producing an increase of the DT in the high-speed zone.These results support the understanding of the physical phenomena relating to disengaged wet clutches,and provide a theoretical basis for the future improvement of drive systems.

Combined-Type Continuous Variable Transmission with Quadric Crank Chains and One-Way Clutches

The conventional Continuously Variable Transmission （CVT） has been classified as belt-type or toroidal CVTs. Each CVT is fundamentally composed of several components to transmit the frictional force or torque generated by the driving force. Since the conventional CVTs use friction force, their energy （force or torque） transfer efficiency might be inferior due to slippage and pressure between the transmission components. Consequently, we propose a new type of structural CVT. The CVT we proposed in this paper means a combined-type transmission with quadric crank chains and one-way clutches.

The clutch size,incubation behavior of Reeves’s Pheasant(Syrmaticus reevesii) and their responses to ambient temperature and precipitation

Weather conditions play a pivotal role in embryo development and parental incubation costs,potentially impacting the clutch size and incubation behavior of birds.Understanding these effects is crucial for bird conservation.Reeves’ s Pheasant(Syrmaticus reevesii) is a threatened species endemic to China,which is characterized by female-only incubation.However,there is a lack of information regarding the impact of weather conditions on clutch size and incubation behavior in this species.Using satellite tracking,we tracked 27 wild female Reeves’ s Pheasants from 2020 to 2023 in Hubei Province,China.We explored their clutch size and incubation behavior,as well as their responses to ambient temperature and precipitation.Clutch size averaged 7.75 ±1.36,had an association with average ambient temperature and average daily precipitation during the egglaying period,and was potentially linked to female breeding attempts.Throughout the incubation period,females took an average of 0.73 ±0.46 recesses every 24 h,with an average recess duration of 100.80 ±73.37 min and an average nest attendance of 92.98 ±5.27%.They showed a unimodal recess pattern in which nest departures peaked primarily between 13:00 and 16:00.Furthermore,females rarely left nests when daily precipitation was high.Recess duration and nest attendance were influenced by the interaction between daily mean ambient temperature and daily precipitation,as well as day of incubation.Additionally,there was a positive correlation between clutch size and recess duration.These results contribute valuable insights into the lifehistory features of this endangered species.

解读竞赛压力下的运动表现:一个“Clutch”视角的运动能力初探

"Clutch"是一种与"Choking"典型相反的现象,主要描述运动员在比赛关键时刻的完美表现。基于"Clutch"表现,从现象学的角度,讨论压力下运动能力的发挥,并分析"Clutch"运动员的能力表现特征,旨在为优秀运动员的训练和选拔提供理论依据。研究认为,竞赛压力下的运动表现存在极性现象,"Choking"反映的是负性运动表现,而"Clutch"反映的是正性运动表现。从特征解释上讲,"Choking"表述为情景的运动表现,而"Clutch"则是特质的运动表现。"Clutch"反映了运动员在压力下展示技术的能力,一般发生在优秀运动员身上。通过"Clutch"运动表现的案例分析,结合相关研究成果,认为"Clutch"运动员是存在的,并提出了"Clutch"运动员的能力表现解释模型。该模型主要包括"专项运动能力"、"压力认知应对能力"和"运动员人格"3个方面。

Study of Controlling Clutch Engagement for AMT Based on Fuzzy Logic

The control of the clutch engagement for an automatic mechanical transmission in the process of a tracklayer getting to start is studied. The dynamic model of power transmission and automatic clutch system is developed. Using tools of Simulink, the transient characteristics during the vehicle starting, including the jerk and the clutch slip time, are provided here. Based on the analyses of the simulation results and driver’s experiences, a fuzzy controller is designed to control the clutch engagement. Simulation results verify its value.

Dynamic Performance Simulation of Power Shift Clutch During Shift

Based on the theoretical analyses, the dynamic and mathematical models of the system were developed. The models were implemented in the ambit of the Matlab/Simulink environment, and an integrated simulation model was developed. The dynamic performance of the power shift clutch during engagement and disengagement was studied by using this assembly model. The sliding speed, torque transmitted through the clutch, and the rate at which energy is dissipated during the process were determined. Using this model, the calculation during simulation can be simplified. This lays a foundation for the dynamic performance research on the power train with the power shift clutch, and provides a powerful tool for developing an automatic, electronically controlled transmission.

Oil-Film Clutch in Soft-Start of Belt Conveyor

The oil film clutch, which is superior in speed adjustment, is capable of being used in the belt conveyor to carry out soft start operation. According to running properties of both belt conveyor and oil film clutch, equations that are used to decide the lubricating oil flow and the number of oil films (i.e. the number of rotating and stationary plates) are deduced theoretically. Also key parameters are provided for the design of the hydraulic system. All these together provide the theoretical basis for the soft start design of the belt conveyor and references for the application of the oil film clutch in similar fields.

“Clutch”运动员特征的概念构图

研究基于王进等(2013)的"Clutch"运动员能力特征假设模型,运用概念构图的数据分析方法,验证"Clutch"运动员的结构解释要素。被试为6名高级教练员、6名优秀运动员和6名运动训练方面的专家,通过一对一的深度访谈,收集数据作为分析素材。然后按照创建分析单元、分类、多维定标、聚类分析、完成概念构图和解释概念构图的顺序进行分析。结果支持了王进等的"Clutch"运动员的结构要素解释假设模型,并且发现解释模型的3个要素可具体分解为压力认知敏感度、压力应对能力、心智能力、身体与技战术能力、心理敢为性、态度积极性、心理坚韧性和自信8个维度。并进一步讨论了其概念的内涵。

Analysis of the Test of ER Fan Clutch

Aim To carry out an experiment of the application of ER fluids in the clutch by reforming a fan clutch used in a truck. Methods At three different input rotating speeds,when the strength of applied electric field was changed, the output rotating speeds were recorded and analyzed. Results By comparing the results got under different experimental procedures with those measured with an electro-rheometer, it can be seen that the shearing rate has tremendous influence on the speed modulating of a fan clutch. This is because the disperse phase can't form chains (clusters)easily at high shear rate.Conclusion The result tested on the present ER fluid demonstrates that this fluid will show the properties of Newton one,i.e. its apparent viscosity is constant. as the shear rate increases.

基于VC++的汽车离合器设计软件Clutch_CAD的开发

以Visual C++为软件开发平台,采用Access数据库为数据管理平台,对汽车离合器主要设计参数进行计算和校核分析,开发汽车离合器设计软件Clutch_CAD。用传统方法需要长时间重复计算和制图才能得到的数据和曲线,利用Clutch_CAD可以很方便地得到,这对于提高离合器设计效率、缩短新产品开发周期,特别是提高离合器工作性能都具有非常重要的意义。

Choking与Clutch运动员的自我感知、状态焦虑及应对方式质性研究——以乒乓球项目为例

压力通常被认为是影响工作的重要因素,“Choking”与“Clutch”是常见的压力极性化表现。以乒乓球项目为例,通过对运动员出现“Choking”或“Clutch”时的自我感知、状态焦虑及应对方式进行质性研究,解读两种比赛状态的表现特征及诱因,并对减少“Choking”现象的产生,增加“Clutch”的发生概率提出建议。