A Multi Input Multi Output Converter for Hybrid Energy Systems

Multi input and multi output converters are becoming popular because they are cost effective and compact. This paper proposes a multi input multi output converter for Grid-Solar power integration for uninterrupted power supply. The proposed converter uses four winding transformer with two primary windings and two secondary windings. The grid supply is connected to the first winding of transformer through rectifier-inverter for controlled power transfer. The solar energy is inverted and applied to the second winding of primary. Two output ports are considered. The circuit is designed to get zero current switching during turn-off and zero voltage switching during turn-on to alleviate the switching losses. The simulation results for the proposed configuration are presented in this paper.

一种MIMO系统中的新型资源分配算法

本文提出了一种MIMO(Multi-Input and Multi-Output)系统中的新型自适应调制和功率分配算法,在奇异值分解的基础上通过注水算法进行功率分配,此后根据所分配的功率与信道状态信息来确定自适应调制的门限及相应的调制阶数,并在自适应调制后通过功率修正因子来弥补常见算法中功率不能得到有效利用的问题,仿真结果表明该算法可以得到较高的频谱效率。

一种复数球形译码算法的仿真

球形译码算法作为实现最大似然检测的一种有效快速算法受到了学者们的广泛关注。在通信理论中经常使用到复数信号模型,但目前尚未有文献给出在该模型下明晰的算法流程。利用信号星座图的几何特点,推导了一种保持原信号维数的复数球形译码算法;考虑到算法中涉及对整数环的特殊处理,给出了清晰的算法流程。该流程适用于各种复数矩阵信道模型与典型二维信号星座图,为复数模型下球形译码算法的研究提供了一个有效的仿真平台。

An Indoor Environment Sensing and Localization System via mmWave Phased Array

In this paper,an indoor layout sensing and localization system with testbed in the 60-GHz millimeter wave(mmWave)band,named mmReality,is elaborated.The mmReality system consists of one transmitter and one mobile receiver,both with a phased array and a single radio frequency(RF)chain.To reconstruct the room layout,the pilot signal is delivered from the transmitter to the receiver via different pairs of transmission and receiving beams,so that multipath signals in all directions can be captured.Then spatial smoothing and the two-dimensional multiple signal classification(MUSIC)algorithm are applied to detect the angle-of-departures(AoDs)and angle-of-arrivals(AoAs)of propagation paths.Moreover,the technique of multi-carrier ranging is adopted to measure the path lengths.Therefore,with the measurements of the receiver in different locations of the room,the receiver and virtual transmitters can be pinpointed to reconstruct the room layout.Experiments show that the reconstructed room layout can be utilized to localize a mobile device via the AoA spectrum.

Performance evaluation of DHRR-RIS based HP design using machine learning algorithms

Reconfigurable Intelligent Surfaces(RIS)have emerged as a promising technology for improving the reliability of massive MIMO communication networks.However,conventional RIS suffer from poor Spectral Efficiency(SE)and high energy consumption,leading to complex Hybrid Precoding(HP)designs.To address these issues,we propose a new low-complexity HP model,named Dynamic Hybrid Relay Reflecting RIS based Hybrid Precoding(DHRR-RIS-HP).Our approach combines active and passive elements to cancel out the downsides of both conventional designs.We first design a DHRR-RIS and optimize the pilot and Channel State Information(CSI)estimation using an adaptive threshold method and Adaptive Back Propagation Neural Network(ABPNN)algorithm,respectively,to reduce the Bit Error Rate(BER)and energy consumption.To optimize the data stream,we cluster them into private and public streams using Enhanced Fuzzy C-Means(EFCM)algorithm,and schedule them based on priority and emergency level.To maximize the sum rate and SE,we perform digital precoder optimization at the Base Station(BS)side using Deep Deterministic Policy Gradient(DDPG)algorithm and analog precoder optimization at the DHRR-RIS using Fire Hawk Optimization(FHO)algorithm.We implement our proposed work using MATLAB R2020a and compare it with existing works using several validation metrics.Our results show that our proposed work outperforms existing works in terms of SE,Weighted Sum Rate(WSR),and BER.