Reaction mechanism of phosphorus with multi phase fluxes during hot metal dephosphorization

The formation of solid solution combined with tricalcium phosphate and dicalcium silicate could promote a considerable removal of phosphorus from liquid slag to solid during hot metal dephosphorization,and thus the dephosphorization by using multi phase fluxes could significantly decrease the consumption of lime. However,the reaction mechanism of multi phase fluxes has not been understood clearly.In the present study,the phase diagram for the CaO-SiO_2-FeO-P_2O_5 system has been measured with certain oxygen partial pressure at hot metal pretreatment temperature.Comparing with the CaO-SiO_2-FeO system,shrinkage of liquid phase area at higher FeO contents was observed at 1 673 K with oxygen partial pressure of 9.2×10^(-11) atm.

Numerical simulation of complex multi-phase fluid of casting process and its applications

The fluid of casting process is a typical kind of multi-phase flow. Actually, many casting phenomena have close relationship with the multi-phase flow, such as molten metal filling process, air entrapment, slag movement, venting process of die casting, gas escaping of lost foam casting and so on. Obviously, in order to analyze these phenomena accurately, numerical simulation of the multi-phase fluid is necessary. Unfortunately, so far, most of the commercial casting simulation systems do not have the ability of multi-phase flow modeling due to the difficulty in the multi-phase flow calculation. In the paper, Finite Different Method (FDM) technique was adopt to solve the multi-phase fluid model. And a simple object of the muiti-phase fluid was analyzed to obtain the fluid rates of the liquid phase and the entrapped air phase.

A high precision time-to-digital converter based on multi-phase clock implemented within Field-Programmable-Gate-Array

In this paper, the design of a coarse-fine interpolation Time-to-Digital Converter (TDC) is implemented in an ALTERA’s Cyclone FPGA. The carry-select chain performs as the tapped delay line. The Logic Array Block (LAB) having a propagation delay of 165 ps in the chain is synthesized as delay cell. Coarse counters triggered by the global clock count the more significant bits of the time data. This clock is also fed through the delay line, and LABs create the copies. The replicas are latched by the tested event signal, and the less significant bits are encoded from the latched binary bits. Single-shot resolution of the TDC can be 60 ps. The worst Differential Nonlinearity (DNL) is about 0.2 Least Significant Bit (LSB, 165 ps in this TDC module), and the Integral Nonlinearity (INL) is 0.6 LSB. In comparison with other architectures using the synchronous global clock to sample the taps, this architecture consumed less electric power and logic cells, and is more stable.

Mechanical model study of relationship of molecular configuration and multiphase in liquid crystal materials

A mechanical model of liquid crystals （LCs） is applied to study the polymorphism of homologous series of terphenyl compounds. With a senti-experimental molecular orbit method, we calculate the moment of inertia which represents the rotation state to describe the phase transition temperature obtained from experimental data. We propose a novel explanation of the phase sequence or polymorphism of LC materials using the two key parameters, the moment of inertia and critical rotational velocity. The effect of molecular polarity on the appearance of liquid crystalline is also discussed.

A new analytical model for thermal stresses in multi-phase materials and lifetime prediction methods

Based on the fundamental equations of the mechanics of solid continuum, the paper employs an analytical model for determination of elastic thermal stresses in isotropic continuum represented by periodically distributed spherical particles with different distributions in an infinite matrix, imaginarily divided into identical cells with dimensions equal to inter-particle distances, containing a central spherical particle with or without a spherical envelope on the particle surface. Consequently, the multi-particle-（envelope）- matrix system, as a model system regarding the analytical modelling, is applicable to four types of multi-phase materials. As functions of the particle volume fraction v, the inter-particle distances dl, d2, d3 along three mutually per- pendicular axes, and the particle and envelope radii, R1 and R2, respectively, the thermal stresses within the cell, are originated during a cooling process as a consequence of the difference in thermal expansion coefficients of phases rep- resented by the matrix, envelope and particle. Analytical-（experimental）-computational lifetime prediction methods for multi-phase materials are proposed, which can be used in engineering with appropriate values of parameters of real multi-phase materials.

基于三频观测的Multi_GNSS载波相位特性分析

载波相位观测噪声和多径误差是衡量载波相位观测数据质量的重要指标。采用三频消电离层无几何组合对GPS、BDS和Galileo系统的载波相位观测噪声和多径误差进行计算。选取IGS ARHT和MGO2两测站2021年连续30 d的数据,对上述GNSS系统的载波相位观测噪声和多径误差特性进行了分析,采用高阶谐函数对GPS Block IIF卫星的频间钟偏差进行模型化以降低其对DIF的影响,结论显示,各系统的DIF组合均方根值随着仰角的增大逐渐减小,在高仰角区间内比低仰角区间下降约90%;受残余IFCB的影响,GPS系统的DIF组合均方根值最大,约为BDS-2系统的3—7倍,约为BDS-3和GAL系统的20倍。

Multi-phase field simulation of grain growth in multiple phase transformations of a binary alloy

This work establishes a temperature-controlled sequence function, and a new multi-phase-field model, for liquid- solid-solid multi-phase transformation by coupling the liquid-solid phase transformation model with the solid-solid phase transformation model. Taking an Fe-C alloy as an example, the continuous evolution of a multi-phase transformation is simulated by using this new model. In addition, the growth of grains affected by the grain orientation of the parent phase （generated in liquid-solid phase transformation） in the solid-solid phase transformation is studied. The results show that the morphology of ferrite grains which nucleate at the boundaries of the austenite grains is influenced by the orientation of the parent austenite grains. The growth rate of ferrite grains which nucleate at small-angle austenite grain boundaries is faster than those that nucleate at large-angle austenite grain boundaries. The difference of the growth rate of ferrites grains in different parent phase that nucleate at large-angle austenite grain boundaries, on both sides of the boundaries, is greater than that of ferrites nucleating at small-angle austenite grain boundaries.

Multi-bubble motion behavior of electric field based on phase field model

By coupling the phase field model with the continuity equation of incompressible fluid, Navier–Stokes equation,electric field equation, and other governing equations, a multi-field coupling model for multi-bubble coalescence in a viscous fluids is established. The phase field method is used to capture the two-phase interface. The motion and coalescence of a pair of coaxial bubbles under an external uniform electric field and the effects of different electric field strengths on the interaction and coalescence of rising bubbles are studied. The results show that the uniform electric field accelerates the collision and coalescence process of double bubbles in the fluid, and increases the rising velocity of the coalesced bubble.The electric field with an intensity of E = 2 kV/mm is reduced about 2 times compared with that without electric field in coalescence time. When the electric field strength is strong(E ≥ 1 kV/mm), the coalesced bubble will rupture before it rises to the top of the calculation area, and the time of the bubble rupturing also decreases with the increase of the electric field strength. The phase field method is compared with the simulation results of Lattice Boltzmann Method(LBM), and the shape of bubble obtained by the two methods is in good agreement, which verifies the correctness of the calculation model.

Mechanical properties of irradiated multi-phase polycrystalline BCC materials

Structure materials under severe irradiations in nuclear environments are known to degrade because of irradiation hardening and loss of ductility,resulting from irradiation-induced defects such as vacancies,interstitials and dislocation loops,etc.In this paper,we develop an elastic-viscoplastic model for irradiated multi-phase polycrystalline BCC materials in which the mechanical behaviors of individual grains and polycrystalline aggregates are both explored.At the microscopic grain scale,we use the internal variable model and propose a new tensorial damage descriptor to represent the geometry character of the defect loop,which facilitates the analysis of the defect loop evolutions and dislocation-defect interactions.At the macroscopic polycrystal scale,the self-consistent scheme is extended to consider the multiphase problem and used to bridge the individual grain behavior to polycrystal properties.Based on the proposed model,we found that the work-hardening coefficient decreases with the increase of irradiation-induced defect loops,and the orientation/loading dependence of mechanical properties is mainly attributed to the different Schmid factors.At the polycrystalline scale,numerical results for pure Fe match well with the irradiation experiment data.The model is further extended to predict the hardening effect of dispersoids in oxide-dispersed strengthened steels by the considering the Orowan bowing.The influences of grain size and irradiation are found to compete to dominate the strengthening behaviors of materials.

THE RATE-INDEPENDENT CONSTITUTIVE MODELING FOR POROUS AND MULTI-PHASE NANOCRYSTALLINE MATERIALS

To determine the time-independent constitutive modeling for porous and multi- phase nanocrystalline materials and understand the effects of grain size and porosity on their mechanical behavior, each phase was treated as a mixture of grain interior and grain bound- ary, and pores were taken as a single phase, then Budiansky＇s self-consistent method was used to calculate the Young＇s modulus of porous, possible multi-phase, nanocrystalline materials, the prediction being in good agreement with the results in the literature. Further, the established method is extended to simulate the constitutive relations of porous and possible multi-phase nanocrystalline materials with small plastic deformation in conjunction with the secant-moduli approach and iso-strain assumption. Comparisons between the experimental grain size and porosity dependent mechanical data and the corresponding predictions using the established model show that it appears to be capable of describing the time-independent mechanical behaviors for porous and multi-phase nanocrystalline materials in a small plastic strain range. Further discussion on the modification factor, the advantages and limitations of the model developed were present.

Studies on absorption coefficients of dual-energy γ-rays and measur-ing error correction for multiphase fraction determination

In this article, principle and mathematical method of determining the phase fractions of multiphase flows by using a dual-energy γ -ray system have been described. The dual-energy γ -ray device is composed of radioactive isotopes of 241Am and 137Cs with γ -ray energies of 59.5 and 662 keV, respectively. A rational method to calibrate the absorption coefficient was introduced in detail. The modified arithmetic is beneficial to removing the extra Compton scattering from the measured value. The result shows that the dual-energy γ -ray technique can be used in three-phase flow with average accuracy greater than 95%, which enables us to determine phase fractions almost independent of the flow regime. Improvement has been achieved on measurement accuracy of phase fractions.

MULTI-SCALE AND MULTI-PHASE NANOCOMPOSITE CERAMIC TOOLS AND CUTTING PERFORMANCE

An advanced ceramic cutting tool material Al2O3/TiC/TiN （LTN） is developed by incorporation and dispersion of micro-scale TiC particle and nano-scale TiN particle in alumina matrix. With the optimal dispersing and fabricating technology, this multi-scale and multi-phase nanocomposite ceramic tool material can get both higher flexural strength and fracture toughness than that of A1203/TiC （LZ） ceramic tool material without nano-scale TiN particle, especially the fracture toughness can reach to 7.8 MPa . m^0.5. The nano-scale TiN can lead to the grain fining effect and promote the sintering process to get a higher density. The coexisting transgranular and intergranular fracture mode induced by micro-scale TiC and nano-scale TiN, and the homogeneous and densified microstructure can result in a remarkable strengthening and toughening effect. The cutting performance and wear mechanisms of the advanced multi-scale and multi-phase nanocomposite ceramic cutting tool are researched.

Nuclephilic ring opening of epoxides promoted by multi-site phase-transfer catalyst:An efficient and eco-friendly route to synthesis of β-hydroxythiocyanate

A highly effective and mild protocol for ring opening of epoxides with NH4SCN in the presence of catalytic amount of a multi- site phase-transfer catalyst, α,α＇,α＂-N-hexakis（triethylammoniummethylene chloride）-melamine, is developed. A variety of ^-hydroxy thiocyanates as important intermediates in agricultural and pharmaceutical chemistry were obtained in high yields with excellent regioselectivity and in short reaction times. 2009 Ali Reza Kiasat. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.

Thermo-hydro-mechanical-air coupling finite element method and its application to multi-phase problems

In this paper, a finite element method （FEM）-based multi-phase problem based on a newly proposed thermal elastoplastic constitutive model for saturated/unsaturated geomaterial is discussed. A program of FEM named as SOFT, adopting unified field equations for thermo-hydro-mechanical-air （THMA） behavior of geomaterial and using finite element-finite difference （FE-FD） scheme for so/l-water-air three-phase coupling problem, is used in the numerical simulation. As an application of the newly proposed numerical method, two engineering problems, one for slope failure in unsaturated model ground and another for in situ heating test related to deep geological repository of high-level radioactive waste （HLRW）, are simulated. The model tests on slope failure in unsaturated Shirasu ground, carried out by Kitamura et al. （2007）, is simulated in the framework of soil-water-air three-phase coupling under the condition of constant temperature. While the in situ heating test reported by Munoz （2006） is simulated in the same framework under the conditions of variable temperature hut constant air pressure.

Physics-Aware Deep Learning on Multiphase Flow Problems

In this article, a physics aware deep learning model is introduced for multiphase flow problems. The deep learning model is shown to be capable of capturing complex physics phenomena such as saturation front, which is even challenging for numerical solvers due to the instability. We display the preciseness of the solution domain delivered by deep learning models and the low cost of deploying this model for complex physics problems, showing the versatile character of this method and bringing it to new areas. This will require more allocation points and more careful design of the deep learning model architectures and residual neural network can be a potential candidate.

Enhanced multi-baseline unscented Kalman filtering phase unwrapping algorithm

This paper presents an enhanced multi-baseline phase unwrapping algorithm by combining an unscented Kalman filter with an enhanced joint phase gradient estimator based on the amended matrix pencil model, and an optimal path-following strategy based on phase quality estimate function. The enhanced joint phase gradient estimator can accurately and effectively extract the phase gradient information of wrapped pixels from noisy interferograms, which greatly increases the performances of the proposed method. The optimal path-following strategy ensures that the proposed algorithm simultaneously performs noise suppression and phase unwrapping along the pixels with high-reliance to the pixels with low-reliance. Accordingly, the proposed algorithm can be predicted to obtain better results, with respect to some other algorithms, as will be demonstrated by the results obtained from synthetic data.

Phase selection rules for complex multi-component alloys with equiatomic or close-to-equiatomic compositions

Alloying greatly expands the amount of available materials beyond the naturally existing ones, and more importantly offers the material scientists opportunities to initiatively control the composition-structure-property relationship in materials. Since commonly used metallic materials are mostly multi-component alloys, the know-how of alloying through compositional control, certainly plays a critical role in designing materials with desired structure and properties. However, alloying in multi-component alloys is an extremely complicated issue, as the alloyed products could be the amorphous phase, various solid solutions and intermetallic compounds containing two or more alloy components. By narrowing down the scope of the multi-component alloys to those with equiatomic or close-to-equiatomic compositions only, and also aiming at framing out the rules that govern the phase selection upon alloying in multi-component alloys in a broad sense, we have identified here a simple and easily executable two-parameter scheme that can effectively predict the formation of the amorphous phase, solid solutions and intermetallic compounds, in multi-component alloys, simply from the given alloy compositions. We believe this scheme reveals a clear physical scenario governing the phase selection in multi-component alloys, helps to simplify the alloy design, and benefits the future development of advanced metallic alloys like bulk metallic glasses and high entropy alloys.

Multi-phase helical CT in diagnosis of early hepatocellular carcinoma

OBJECTIVES: To analyze the characteristics of early hepatocellular carcinoma by using multi-phase helical CT and assess the value of this method. METHODS: Multi-phase helical CT findings were reviewed double-blindly by radiologists. RESULTS: Altogether 24 lesions were found in 21 patients. In plain CT, the lesions were seen as hypodense or isodense areas. After contrast enhancement, 87.5% of the lesions showed regular or irregular hyperdense enhancement, whereas 12.5% demonstrated tumor vessels in arterial phase, which became hypodensed or isodensed nodules in portal phase or the hypodensed in delayed phase. The prevalence of density changes showed a hypo-hyper-hypo and hypo-hypo pattern. CONCLUSIONS: Multi-phase helical CT could reflect the blood supply of early hepatocelluar carcinoma, and is also convenient for the differential diagnosis of hepatic cavernous angioma, metastatic tumor, hepatic nodulous hyperplasia, and hepatic inflammatory granuloma.

Multiresidue Method for Determination of 67 Pesticides in Water Samples Using Solid-Phase Extraction with Centrifugation and Gas Chromatography-Mass Spectrometry

A new multi-residue method based on solid-phase extraction (SPE) with centrifugation was developed for determination and quantitation of 67 pesticides in water samples. Two SPE cartridges were tested: Chromabond C18 and Oasis HLB. Parameters that influence the extraction efficiency such as the eluent volume, the sample loading volume, the addition of organic solvent to water sample, sorbent drying and elute concentration were optimized. The innovation of this work was the examination of the use of a centrifugation technique in both the drying and elution steps. When combined with centrifugation, the volume of the elution solvent was reduced to 2 mL and the time for sorbent drying decreased also to 10 min under vacuum. Under the optimized conditions, this method showed good recoveries higher than 65% - 68% for the 67 analyzed pesticides using the C18 and HLB cartridges with relative standard deviations lower than 9.7% - 12.3%. Limits of quantification were between 2 and 20 ng.L–1. The simplicity of the described method, use of less of organic solvent, short procedure time, and good recoveries demonstrate the advantages of this environmentally friendly approach for routine analysis of numerous samples.

Numerical simulation for separation of multi-phase immiscible fluids in porous media

Based on a lattice Boltzmann method and general principles of porous flow, a numerical technique is presented for analysing the separation of multi-phase immiscible fluids in porous media. The total body force acting on fluid particles is modified by axiding relative permeability in Nithiarasu＇s expression with an axiditional surface tension term. As a test of this model, we simulate the phase separation for the case of two immiscible fluids. The numerical results show that the two coupling relative permeability coefficients K12 and K21 have the same magnitude, so the linear flux-forcing relationships satisfy Onsager reciprocity. Phase separation phenomenon is shown with the time evolution of density distribution and bears a strong similarity to the results obtained from other numerical models and the flows in sands. At the same time, the dynamical rules in this model are local, therefore it can be run on massively parallel computers with well computational efficiency.