A Novel Serial Hybrid Three-level NPC Topology for Multi-MW Medium Voltage Wind Power Converters

提出一种新型的串联混合三电平中点钳位（neutralpoint clamped,NPC）拓扑,该拓扑是基于传统三电平NPC拓扑的改进和优化,引入大功率IGBT的串联应用。该新型拓扑中,桥臂的两个外管分别用两个低压IGBT串联,两个内管均用高压IGBT。在多兆瓦级中压风电变流器中,大功率IGBT的开关损耗很大,从而限制了开关频率。提出的新型拓扑通过低压IGBT的串联来减小功率器件的损耗,从而提高开关频率,同时可减小输出滤波器的尺寸。通过传统三电平拓扑和新型串联混合三电平拓扑IGBT损耗的对比,说明新拓扑的优势。通过改变门极驱动电阻实现串联IGBT的均压,对新拓扑的应用具有重大意义。最后通过新拓扑的单相样机验证新拓扑的正确性和可行性。

Mathematical Modeling of Porous Medium for Sound Absorption Simulations: Application of Multi-Scales and Homogenization

The modeling of porous medium has many applications whose techniques can be used in the fields of automotive, aerospace, oil exploration, and biomedical. This work concentrates on the Noise and Vibration (NV) development of automotive interiors but the ideas can be translated to the aforementioned areas. The NV development requires the setting of NV targets at dif-ferent levels. These targets are then translated to TL (Transmission Loss), IL (Insertion Loss), and Alpha (absorption) performance. Therefore, the ability to manage an efficient product development cycle, that entails analyzing vibro-acoustic environments, hinges on the premise that accurate TL, IL, or Alpha values pertaining to the different multi-layered porous materials can be calculated. Thus, there is a need to have a thorough understanding of the physics behind the energy dissipating mechanism that includes the effects of the fluid meandering through the pores of the material. The goal of this series is to model the acoustic and dynamic coupling via multi-scale and homogenizations techniques, thus subsequently understand where to incorporate the concepts of dynamic tortuosity, viscous and thermal permeability, as well as viscous and thermal lengths. This study will allow the ability to get a better understanding of the underlying processes and also provides tools to create practical concepts for determining the coefficients of the macroscopic equations. This will assist in attaining novel ideas for NV absorption and insulation.

Fretting Wear Behavior of Medium Carbon Steel Modified by Low Temperature Gas Multi-component Thermo-chemical Treatment

The introduction of surface engineering is expected to be an effective strategy against fretting damage. A large number of studies show that the low gas multi-component （such as carbon, nitrogen, sulphur and oxygen, etc） thermo-chemical treatment（LTGMTT） can overcome the brittleness of nitriding process, and upgrade the surface hardness and improve the wear resistance and fatigue properties of the work-pieces significantly. However, there are few reports on the anti-fretting properties of the LTGMTT modified layer up to now, which limits the applications of fretting. So this paper discusses the fretting wear behavior of modified layer on the surface of LZ50 （0.48%C） steel prepared by low temperature gas multi-component thermo-chemical treatment （LTGMTT） technology. The fretting wear tests of the modified layer flat specimens and its substrate （LZ50 steel） against 52100 steel balls with diameter of 40 mm are carried out under normal load of 150 N and displacement amplitudes varied from 2 μm to 40 μm. Characterization of the modified layer and dynamic analyses in combination with microscopic examinations were performed through the means of scanning electron microscope（SEM）, optical microscope（OM）, X-ray diffraction（XRD） and surface profilometer. The experimental results showed that the modified layer with a total thickness of 60 μm was consisted of three parts, i.e., loose layer, compound layer and diffusion layer. Compared with the substrate, the range of the mixed fretting regime（MFR） of the LTGMTT modified layer diminished, and the slip regime（SR） of the modified layer shifted to the direction of smaller displacement amplitude. The coefficient of friction（COF） of the modified layer was lower than that of the substrate in the initial stage. For the modified layer, the damage in partial slip regime（PSR） was very slight. The fretting wear mechanism of the modified layer both in MFR and SR was abrasive wear and delamination. The modified layer presented better wear resistance than the substrate in PSR and MFR; however, in SR, the wear resistance of the modified layer decreased with the increase of the displacement amplitudes. The experimental results can provide some experimental bases for promoting industrial application of LTGMTT modified layer in anti-fretting wear.

PARAMETRIC MATCHING SELECTION OF MULTI-MEDIUM COUPLING SHOCK ABSORBER

To achieve the dual demand of resisting violent impact and attenuating vibration in vibration-impact-safety of protection for precision equipment such as MEMS packaging system, a theo- retical mathematical model of multi-medium coupling shock absorber is presented. The coupling of quadratic damping, linear damping, Coulomb damping and nonlinear spring are considered in the model. The approximate theoretical calculating formulae are deduced by introducing transformation-tactics. The contrasts between the analytical results and numerical integration results are developed. The resisting impact characteristics of the model are also analyzed in progress. In the meantime, the optimum model of the parameters matching selection for design of the shock absorber is built. The example design is illustrated to confirm the validity of the modeling method and the theoretical solution.

铁线莲品种‘Multi-Blue’不定根的诱导培养及其发生过程的解剖学观察

对适宜于铁线莲品种‘Multi-Blue’(Clematis‘Multi-Blue’)不定芽生根培养的基本培养基进行了筛选,并采用L9(32)正交实验设计对生根培养基中NAA和IBA质量浓度进行了比较分析,对不定根形成过程中解剖结构的变化也进行了观察。接种在1/2MS培养基上的铁线莲品种‘Multi-Blue’不定芽的生根率极显著高于改良1/2MS、MS和WPM培养基(P<0.01),生根率达66.97%;在1/2MS培养基中添加0.05 mg.L-1NAA,不定芽的生根效果最好,生根率达69.34%,极显著高于其他处理组(P<0.01)。研究结果表明,添加0.05 mg.L-1NAA的1/2MS培养基(含30 g.L-1蔗糖和8 g.L-1琼脂,pH5.8)为铁线莲品种‘Multi-Blue’不定芽生根培养的最佳培养基。在不定芽的茎横切面上未见潜伏根原基存在;而在接种约1周后,不定芽茎基部皮层的薄壁细胞逐渐恢复分生能力,出现胞质变浓、核质增加、液泡缩小及细胞排列紧密等变化,细胞开始分裂并形成分生细胞团;接种后约2周,根原基发端细胞不断分裂并逐渐形成体积较小、染色较深的一群分生细胞,并出现明显的分层结构;接种后约3周,细胞继续进行平周分裂和垂周分裂,并分化出球形或楔形的不定根根原基;根原基在皮层中常发生弯曲或分支,且皮层处的不定根加粗生长,最终突破皮孔并形成独立的不定根。观察结果表明,铁线莲品种‘Multi-Blue’不定芽基部形成的不定根根原基为诱生根原基。

面向服务的Multi-Agent系统

本文以服务为中心,从面向服务的系统架构、中介服务协作机制、理性化的协商机制和智能交互等四个方面去建立开放、动态、面向服务的多Agent系统,以提高Agent的社会性智能。

Performance Evaluation for Medium Voltage MIMO-OFDM Power Line Communication System

Power line communication(PLC)provides intelligent electrical functions such as power quality measurement,fault surveys,and remote control of electrical network.Most of research works have been done in low voltage(LV)scenario due to the fast development of in-home PLC.The aim of this paper is to evaluate the link-level performance of a medium voltage(MV)MIMO-OFDM communication system based on transmission link under underground power line channel.The MIMO channel is modeled as a modified multipath model in the presence of impulsive noise and background noise.We first perform a measurement on the practical MV MIMO channel parameters for a section of buried cable of 1 km long in Ganzhou city,Jiangxi province,China.Based on the measured channel,we design the frame structure based on an IEEE standard for broadband over power line networks[1]to support MV MIMO-OFDM transmission.According to designed frame structure,we design an encoder and a decoder for a dual binary tail-biting turbo code and optimize some key decoder parameters for low bit error rate performance.Finally,the link-level performance for both spatial multiplexing and spatial diversity are evaluated.Numeral results show that MV MIMO-OFDM is a promising approach to provide both high data rate and link reliability for PLC.

In-plane dynamic Green's functions for inclined and uniformly distributed loads in a multi-layered transversely isotropic half-space

The dynamic stiffness method combined with the Fourier transform is utilized to derive the in-plane Green’s functions for inclined and uniformly distributed loads in a multi-layered transversely isotropic（TI）half-space.The loaded layer is fixed to obtain solutions restricted in it and the corresponding reactions forces,which are then applied to the total system with the opposite sign.By adding solutions restricted in the loaded layer to solutions from the reaction forces,the global solutions in the wavenumber domain are obtained,and the dynamic Green’s functions in the space domain are recovered by the inverse Fourier transform.The presented formulations can be reduced to the isotropic case developed by Wolf（1985）,and are further verified by comparisons with existing solutions in a uniform isotropic as well as a layered TI halfspace subjected to horizontally distributed loads which are special cases of the more general problem addressed.The deduced Green’s functions,in conjunction with boundary element methods,will lead to significant advances in the investigation of a variety of wave scattering,wave radiation and soil-structure interaction problems in a layered TI site.Selected numerical results are given to investigate the influence of material anisotropy,frequency of excitation,inclination angle and layered on the responses of displacement and stress,and some conclusions are drawn.

Multi-features Based Approach for Moving Shadow Detection

In the video-based surveillance application, moving shadows can affect the correct localization and detection of moving objects. This paper aims to present a method for shadow detection and suppression used for moving visual object detection. The major novelty of the shadow suppression is the integration of several features including photometric invariant color feature, motion edge feature, and spatial feature etc. By modifying process for false shadow detected, the averaging detection rate of moving object reaches above 90% in the test of Hall-Monitor sequence.

The Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST)

The Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST, also called the Guo Shou Jing Telescope) is a special reflecting Schmidt telescope. LAMOST’s special design allows both a large aperture (effective aperture of 3.6 m–4.9 m) and a wide field of view (FOV) (5°). It has an innovative active reflecting Schmidt configuration which continuously changes the mirror’s surface that adjusts during the observation process and combines thin deformable mirror active optics with segmented active optics. Its primary mirror (6.67m×6.05 m) and active Schmidt mirror (5.74m×4.40 m) are both segmented, and composed of 37 and 24 hexagonal sub-mirrors respectively. By using a parallel controllable fiber positioning technique, the focal surface of 1.75 m in diameter can accommodate 4000 optical fibers. Also, LAMOST has 16 spectrographs with 32 CCD cameras. LAMOST will be the telescope with the highest rate of spectral acquisition. As a national large scientific project, the LAMOST project was formally proposed in 1996, and approved by the Chinese government in 1997. The construction started in 2001, was completed in 2008 and passed the official acceptance in June 2009. The LAMOST pilot survey was started in October 2011 and the spectroscopic survey will launch in September 2012. Up to now, LAMOST has released more than 480 000 spectra of objects. LAMOST will make an important contribution to the study of the large-scale structure of the Universe, structure and evolution of the Galaxy, and cross-identification of multiwaveband properties in celestial objects.

RECONSTRUCTION OF ONE DIMENSIONAL MULTI-LAYERED MEDIA BY USING A TIME DOMAIN SIGNAL FLOW GRAPH TECHNIQUE

A novel inverse scattering method to reconstruct the permittivity profile of one-dimensional multi-layered media is proposed in this paper.Based on the equivalent network ofthe medium,a concept of time domain signal flow graph and its basic principles are introduced,from which the reflection coefficient of the medium in time domain can be shown to be a series ofDirac δ-functions(pulse responses).In terms of the pulse responses,we will reconstruct both thepermittivity and the thickness of each layer will accurately be reconstructed.Numerical examplesverify the applicability of this

沿海中小河流域地表-地下水库联合调控洪水资源利用研究:Ⅰ.方法与模型

针对沿海中小河流域地表-地下水库复杂工程系统,因缺少联合调控方法而导致洪水资源利用难的问题,解析地表-地下水库系统结构与功能,定量模拟地表水库调度、闸坝调控下河流和地下水动力过程,并利用智能替代模型提升水动力过程计算速度;在此基础上通过研发时/日/月多时间尺度模型耦合嵌套方法,构建了兼顾计算精度与效率的地表-地下水库联合调控模型。该模型实现了洪水、地表-地下水相互作用和供水等时间尺度差异明显的调节过程的统一调配,可为沿海中小河流域洪水资源利用提供新思路与技术支撑。

A Comparative Study of Acute Hemodynamic Effects of Multi -site Cardiac Pacing in patients with cardiac function NYHA class ⅠtoⅡ without bundle branch block

Objective To compare the acute hemodynamic effects of five different pacing modes in patients with cardiac function NYHA class Ⅰ to Ⅱ without bundle branch block (BBB). Methods This study included 12 patients (SSS 7, Ⅲ°AVB 5) undergoing pacemaker implantation. Right ventricular apex (RVA), right ventricular outflow tract (RVOT), right ventricular bifocal (RV-Bi), left ventricular base (LVB) and bi -ventricular (Bi-Ⅴ) pacing at 60 -80 ppm were done in VVI mode prior to implantation of DDD pacemaker. The cardiac index (CI), mean pulmonary artery pressure (mPAP) and pulmonary capillary wedge pressure (PCWP) were measured with Swan - Ganz thermodilution catheter after 5 minutes of each pacing mode. Results (1) Comparing to pacing at RVA (CI: 2. 41± 0. 38 L/min per m2, PCWP: 16. 7 ±3.3 mmHg), the CI increased and the PCWP decreased significantly in pacing at RVOT(CI: 2. 63 ± 0.46, PCWP: 13. 8±2. 3), LVB(CI: 2. 78±0.52, PCWP: 14. 4±3.1), RV-Bi(CI: 2. 83±0.57, PCWP: 12. 8± 2. 5) and Bi -Ⅴ pacing (CI: 2. 94± 0.60, PCWP: 12. 7±2. 5), P < 0. 01, respectively. (2) The CI of RV-Bi and Bi-Ⅴ pacing was higher than that of RVOT and LVB pacing, the PCWP was lower, P < 0. 05, respectively. (3) There was no significant difference between RV - Bi pacing and Bi-Ⅴ pacing in CI and PCWP. Conclusion There is no significant difference between RV - Bi pacing and Bi -V pacing in the acute hemodynamic effects; however,dual - site pacing is much better than single site pacing in that aspect for patients with cardiac function NYHA class Ⅰ to Ⅱ without BBB. Among single site pacing, the RVOT and LVB pacing is better than RVA pacing in cardiac function.

Grid-connected Multilevel Topology for HVDC Offshore Wind Farm Based on MFT

This paper presents a new topology to connect high voltage direct current(HVDC) offshore wind farm into the grid.The offshore part consists of five units,each unit contains permanent magnet synchronous generator(PMSG) connected to three-phase/three-phase matrix converter to control the generator speed by using a maximum power point tracking(MPPT) control.The offshore platform consists of a three-phase medium frequency transformer(MFT) and a modular multi-level converter(MMC).The primary of each phase of the transformer connected to one phase from each unit.The secondary of the transformer connected to MMC to get HVDC.The HVDC cable will be used to transfer power from the offshore side to the on-shore side.Five-level MMC is used in the onshore side to control the DC voltage and to connect the offshore wind farm into the grid by converting the HVDC to high voltage alternative current(HVAC).

Research on A Master - slave Multi - microcomputers Control System for Hollow Spindle Fancy Yarn Spinning Machine

In this paper, a successfully studied and developed master - slave muld - microcomputers control system based on PC - BUS for hollow spindle fancy yarn spinning machine, mainly Its overall scheme, software and hardware construction, is introduced. Spinning experiments show that the system achieves satisfactory result. This system can solve the diftkultles of mechatronical fusion between domestic hollow splndk fancy yarn spuming muchine and its microcomputer control technology.

On the Representation of Multi-layer Woven Structure

A quantitative method is developed to identify the structures of multi-layer woven fabric in this study. Six structural parameters are selected to represent the fabric structure. With some design criteria for the reinforcement of textile composites, the relationships among the structural parameters are derived for different binding patterns of the fabric structure. The conditions, which meet the requirements of structural cell stability,are also discussed.

Computer-aided Pattern Design of Multi-bar Warp Knitted Fabrics

To meet the development trend of multi-bar warp knit-ting machine towards high-speed,advanced technologyand computer control and the requirements of variousproducts with small quantity,there are many researcheson the computer-aided pattern design of multi-barwarp knitted fabrics.In terms of the special propertiesof the computer-aided pattern design of multi-barwarp knitted fabrics,the Object Oriented Program(OOP)programming-Object Windows class Library(OWL)programming is selected.According to thecharacters of the OWL programming,various functionsare defined.Pattern design and technical parameters canbe output,which offers a great convenience for the fac-tory.

中低温下基于纯膜条件多段A/O-MBBR系统脱氮能力中试研究

针对低温条件下活性污泥法生物硝化限制性瓶颈问题,构建了三段式A/O-MBBR中试系统,对其在中低温条件下的脱氮能力开展研究,结合生物膜在静态实验条件下的硝化能力及形态变化,分析了系统脱氮效果的影响因素。研究结果表明,在反应温度为10~16℃、处理水量为(23.6±5.4) m^(3)/d、碳源投加量为50~90 mg/L条件下,系统进水SCOD、NH+4-N和TIN浓度分别为(147±30)、(38.3±2.1)和(39.6±2.3) mg/L,出水分别降至(26±6)、(0.4±0.6)和(6.8±3.6) mg/L,去除率分别达到82.3%、99.0%和82.8%,其中系统中第2段A/O-MBBR分系统表现出良好的硝化能力,其硝化去除负荷可达0.9 g/(m^(2)·d),NH_(4)^(+)-N硝化贡献率可达54%;生物膜厚度是影响其硝化能力的重要因素。

MEDIUM-RANGE OSCILLATION OF METEOROLOGICAL ELEMENTS AT GREAT WALL STATION,ANTARCTICA

A method of multi-spectral analysis is used to study the spectral characteristics of surface and upper-level meteorological elements over the Great Wall Station (62°12'S, 58°57'W), Antarctica and their phasecorrelation, propagation of mean oscillation at 500hPa level in the Southern Hemisphere and their corresponding synoptic sense. the results are summed up as follows: 1. Over the sub-Antatctic zone, as in the Northern Hemisphere there generally exist quasi-weekly oscillation and quasi-biweekly oscillation. In different seasons the oscillations of meteorological elements are different: in winter season quasi-biweekly oscillation is dominant, while in summer season quasi-weekly oscillation is dominant. 2. From the Earth's surface to the lower stratosphere there is a distinct quasi-weekly oscillation at each isobaric surface, but the most intense oscillation appears at 200-300hPa, and the oscillations of height and temperature are propagated downward. 3. Both in winter and summer seasons the quasi-biweekly oscillation are propagated from west to east, and the mean velocity of its propagation is about 7-17 longtitude / day. 4. The quasi-biweekly oscillation and the quasi-weekly oscillation over the sub - Antarctic zone are closely related to the activity and intensity variation of polar vortex at 500hPa, while at 1000hPa they reflect an interaction between the circumpolar depression and the sub-tropical high. The quasi-biweekly oscillation may be a reflection of inherent oscillation of the polar vortex, where as the quasi-weekly oscillation is a result of forced oscillation by external disturbance.A large number of calculations and analysis made reveals the features of medium-range oscillation over the sub-Antarctic zone. The results are of significance for understanding the behaviour of synoptic dynamics and making the weather forecast.This work is supported by National Committee for Antarctic Research.

MODS： A Novel Metaheuristic of Deterministic Swapping for the Multi-Objective Optimization of Combinatorials Problems

This paper states a new metaheuristic based on Deterministic Finite Automata （DFA） for the multi - objective optimization of combinatorial problems. First, a new DFA named Multi - Objective Deterministic Finite Automata （MDFA） is defined. MDFA allows the representation of the feasible solutions space of combinatorial problems. Second, it is defined and implemented a metaheuritic based on MDFA theory. It is named Metaheuristic of Deterministic Swapping （MODS）. MODS is a local search strategy that works using a MDFA. Due to this, MODS never take into account unfeasible solutions. Hence, it is not necessary to verify the problem constraints for a new solution found. Lastly, MODS is tested using well know instances of the Bi-Objective Traveling Salesman Problem （TSP） from TSPLIB. Its results were compared with eight Ant Colony inspired algorithms and two Genetic algorithms taken from the specialized literature. The comparison was made using metrics such as Spacing, Generational Distance, Inverse Generational Distance and No-Dominated Generation Vectors. In every case, the MODS results on the metrics were always better and in some of those cases, the superiority was 100%.