The Utilization Methods of Multi-Media Technology in Higher VocationalEnglish Teaching

Not only does the multi-media technology in teaching help students arouse curiosity and draw their attention,but also it makes students enhance their language skills and master knowledge.It makes English teaching smooth.

The Optimization Study about Fault Self-Healing Restoration of Power Distribution Network Based on Multi-Agent Technology

In order to quickly and accurately locate the fault location of the distribution network and increase the stability of the distribution network,a fault recovery method based on multi-objective optimization algorithm is proposed.The optimization of the power distribution network fault system based on multiagent technology realizes fast recovery of multi-objective fault,solve the problem of network learning and parameter adjustment in the later stage of particle swarm optimization algorithm falling into the local extreme value dilemma,and realize the multi-dimensional nonlinear optimization of the main grid and the auxiliary grid.The system proposed in this study takes power distribution network as the goal,applies fuzzy probability algorithm,simplifies the calculation process,avoids local extreme value,and finally realizes the energy balance between each power grid.Simulation results show that the Multi-Agent Technology enjoys priority in restoring important load,shortening the recovery time of power grid balance,and reducing the overall line loss rate of power grid.Therefore,the power grid fault self-healing system can improve the safety and stability of the important power grid,and reduce the economic loss rate of the whole power grid.

Research on the process of fabricating a multi-layer metal micro-structure based on UV-LIGA overlay technology

In this paper,we report the study of the process of fabricating a multi-layermetal micro-structure using UV-LIGA overlay technology,includingmask fabrication,substrate treatment,and UV-LIGA overlay processes.To solve the process problems in the masking procedure,the swelling problemof the first layer of SU-8 thick photoresist was studied experimentally.The 5μmline-width compensation and closed 20μmand 30μmisolation strips were designed and fabricated around the micro-structure pattern.The pore problemin the Ni micro-electroforming layer was analyzed and the electroforming parameters were improved.The pH value of the electroforming solution should be controlled between 3.8 and 4.4 and the current density should be below 3 A/dm^2.To solve the problems of high inner stress and incomplete development of the micro-cylinder hole array with a diameter of 30μm,the lithography process was optimized.The pre-baking temperature was increased via gradient heating and rose every 5℃ from 65℃ to 85℃ and then remained at 85℃ for 50 min–1 h.In addition,the full contact exposure was used.Finally,a multi-layer metal micro-structure with high precision and good quality of microelectroforming layer was fabricated using UV-LIGA overlay technology.

Technology of structure damage monitoring based on multi-agent

The health monitoring for large-scale structures need to resolve a large number of difficulties,such as the data transmission and distributing information handling.To solve these problems,the technology of multi-agent is a good candidate to be used in the field of structural health monitoring.A structural health monitoring system architecture based on multi-agent technology is proposed.The measurement system for aircraft airfoil is designed with FBG,strain gage,and corresponding signal processing circuit.The experiment to determine the location of the concentrate loading on the structure is carried on with the system combined with technologies of pattern recognition and multi-agent.The results show that the system can locate the concentrate loading of the aircraft airfoil at the accuracy of 91.2%.

Gravitational Wave Detection Technology Development and Its Contribution to Cosmology

Gravitational wave detection has ushered in a new era of observing the universe, providing humanity with a novel window for cosmic cognition. This theoretical study systematically traces the developmental trajectory of gravitational wave detection technology and delves into its profound impact on cosmological research. From Einstein’s prediction in general relativity to LIGO’s groundbreaking discovery, the article meticulously delineates the key theoretical and technological milestones in gravitational wave detection, with particular emphasis on elucidating the principles and evolution of core detection technologies such as laser interferometers. The research thoroughly explores the theoretical application value of gravitational waves in verifying general relativity, studying the physics of compact celestial bodies like black holes and neutron stars, and precisely measuring cosmological parameters. The article postulates that gravitational wave observations may offer new research perspectives for addressing cosmological conundrums such as dark matter, dark energy, and early universe evolution. The study also discusses the scientific prospects of combining gravitational wave observations with electromagnetic waves, neutrinos, and other multi-messenger observations, analyzing the potential value of this multi-messenger astronomy in deepening cosmic cognition. Looking ahead, the article examines cutting-edge concepts such as space-based gravitational wave detectors and predicts potential developmental directions for gravitational wave astronomy. This research not only elucidates the theoretical foundations of gravitational wave detection technology but also provides a comprehensive theoretical framework for understanding the far-reaching impact of gravitational waves on modern cosmology.

A Study of Multi-Permeating TiN/Ti Alloying Layer Using Plasma Surface Alloying Technology

TiN/Ti multi-permeating alloying layer has been formed on the low carbon steel by means of the double glow-discharge plasma surface alloying technique and hollow-cathode effect. The alloying layer was detected by axiovert 25 CA optical microscope with computer analyzing software （LEC）, GDA-2 glow discharge spectroscopy （GDS）, X-ray diffraction （XRD） and galvanochemical method. The results showed that the thickness of TiN/Ti multi-permeating alloying layer was about 10μm, the content of Ti on the surface was up to 63.48 wt% and the content of N was up to 12.46 wt%. The atom Ti and N concentrations changed gradually across the depth of the alloying layer and the preferred orientation of TiN/Ti alloying layer was crystal surface （200）. The multi-permeating alloying layer and substrate were combined through metallurgy. The surface appearances of the multi-permeating alloying layer were uniform and of a compact cellular structure. The hardness of the surface was about 1600-3000 HV0.1. The corrosion resistance of the permeating TiN/Ti alloying layer in 0.5 mol/L H2SO4 solution was greatly increased and the corrosion rate was only 0.3082 g/m^2. h.

The study of protection coordination technology in power system based on Multi-Agent

This paper studies mainly how to make use of Multi- Agent technology to solve the complex problems which are caused by unsuitable coordination between protection and untimely action and protection fault activity in large power system, and realizes timely the coordination among protections effectively in when losing some or all information. Thus it overcomes the difficult of solving single or shore range information, enhances correspond and coordination among the intelligent protect Agent, raises the stable and reliable property, and promotes the process of power network for large area.

Agent Technology Application in Automating the Coordination and Decision-Making in Supply Chain

Coordinating all the activities among all the parties involved in supply chain can be a daunting task. This paper put forth the viewpoint of applying agent technology to automate the coordination and decision-making tasks in a typical home PC industry supply chain. The main features of the proposed approach, which differentiate it from other approaches, are the following:① In the prototype, the coordination agents have both cooperation and competition patterns; ② It uses JADE (Java Agent DEvelopment Framework) as the agent development environment to realize efficient and reusable agent software;③ It produces some innovative models for the business processes and issues faced by parties in the supply chain. A prototype and the overall process flow were also described.

Design of distance teaching platform based on Agent technology

The computer network technology and multi-media technology offer a new teaching mode for the distance education. Now there are still many problems in modern distance education such as weak generality, flexibility and intelligence, etc. This paper brought up a design mode of distance teaching platform based on Agent mechanism and the concrete implementation method through analyzing the characteristic and structure of Agent technology.

An Improved SOI CMOS Technology Based Circuit Technique for Effective Reduction of Standby Subthreshold Leakage

Silicon-on-insulator (SOI) CMOS technology is a very attractive option for implementing digital integrated circuits for low power applications. This paper presents migration of standby subthreshold leakage control technique from a bulk CMOS to SOI CMOS technology. An improved SOI CMOS technology based circuit technique for effective reduction of standby subthreshold leakage power dissipation is proposed in this paper. The proposed technique is validated through design and simulation of a one-bit full adder circuit at a temperature of 27℃, supply voltage, VDD of 0.90 V in 120 nm SOI CMOS technology. Existing standby subthreshold leakage control techniques in CMOS bulk technology are compared with the proposed technique in SOI CMOS technology. Both the proposed and existing techniques are also implemented in SOI CMOS technology and compared. Reduction in standby subthreshold leakage power dissipation by reduction factors of 54x and 45x foraone-bit full adder circuit was achieved using our proposed SOI CMOS technology based circuit technique in comparison with existing techniques such as MTCMOS technique and SCCMOS technique respectively in CMOS bulk technology. Dynamic power dissipation was also reduced significantly by using this proposed SOI CMOS technology based circuit technique. Standby subthreshold leakage power dissipation and dynamic power dissipation were also reduced significantly using the proposed circuit technique in comparison with other existing techniques, when all circuit techniques were implemented in SOI CMOS technology. All simulations were performed using Microwindver 3.1 EDA tool.

Development of Operational Space Environment Technology System

With the increasing of users and the demands which are transforming from the monotonous traditional service to network service,Multiple space environment web applications including browser-client,rich-client and mobile-client applications have been developed by SEPC(Space Environment Prediction Center,NSSC,CAS)during the past few years.The architecture of Operational Space Environment Technology System(OSETS) that these applications rely on is described and the description of structural optimization of the architecture is provided.To demonstrate the evolution of the OSETS,three web application examples for e SpaceWx,Space Weather Situation Awareness Picture(SWSAP),Plug-and-Play SWx Analysis and Plotting Program(PPSWAP) are presented.

Optimization Design System for Composite Structures Based on Grid Technology

To solve the topology optimization of complicated multi-objective continuous/discrete design variables in aircmit structure design, a Parallel Pareto Genetic Algorithm （PPGA） is presented based on grid platform in this paper. In the algorithm, the commercial finite element analysis （FEA） software is integrated as the calculating tool for analyzing the objective functions and the filter of Pareto solution set based on weight information is introduced to deal with the relationships among all objectives. Grid technology is utilized in PPGA to realize the distributed computations and the user interface is developed to realize the job submission and job management locally/remotely. Taking the aero-elastic tailoring of a composite wing for optimization as an example, a set of Pareto solutions are obtained for the decision-maker. The numerical results show that the aileron reversal problem can be solved by adding the limited skin weight in this system. The algorithm can be used to solve complicated topology optimization for composite structures in engineering and the computation efficiency can be improved greatly by using the grid platform that aggregates numerous idle resources.

Inevitability and Emergent Problems of Science &Technology Innovation Access to Integration

The causes and the problems of integration of scientific ＆ technical innovation （ISTI） and inevitability are proposed. The status of domestic scientific ＆ technical innovation is analysed. A series of emergent managerial problems caused by the system ISTI （SISTI） are pointed out. Because of Hall three dimensions structure＇s enlightenment, a three dimensional logical net diagram in which the system integration of innovation based on problem in real world but not on disciplinary logic is drawn. The intelligent group＇ s need span is greater under the conditions of relatively low material level than common groups who have lower degree of education. The SISTI is composed by multi-rule and intelligent multi-agent behavior. It is concluded that the logical relationships of integrated technology which based on the author＇s experience and observation must be considerded for a valid management of SISTI.

Application of Combined Production Logging Technology in Horizontal Wells

随着海上油气田开发的不断深化,水平井技术已在增储上产中起到了巨大作用,但也面临着出水及含水不断升高的问题。进行水平段储层生产测井,确定井下层内生产情况及储层动用情况,是后期控水稳产、措施挖潜的关键。水平井因井眼轨迹与储层平行、流体重力分异明显、上/下坡流共存等因素,常规居中测量中心流速的测井技术已不适用;同时,水平井为单层开采,剩余油饱和度分布无标准水层刻度,为生产层剩余油分布监测提出了挑战。提出了阵列式多相流测井仪组合(MAPS)和剩余油饱和度测井技术(RPM)的组合测井方式,通过水平段截面速度剖面、流体性质分布以及剩余油饱和度分布三者间的相互验证、综合解释的解决方案,取得了良好效果。

Simple, Flexible, and Interoperable SCADA System Based on Agent Technology

SCADA (Supervisory Control and Data Acquisition) is concerned with gathering process information from industrial control processes found in utilities such as power grids, water networks, transportation, manufacturing, etc., to provide the human operators with the required real-time access to industrial processes to be monitored and controlled either locally (on-site)or remotely (i.e., through Internet). Conventional solutions such as custom SCADA packages, custom communication protocols, and centralized architectures are no longer appropriate for engineering this type of systems because of their highly distribution and their uncertain continuously changing working environments. Multi-agent systems (MAS) appeared as a new architectural style for engineering complex and highly dynamic applications such as SCADA systems. In this paper, we propose an approach for simply developing flexible and interoperable SCADA systems based on the integration of MAS and OPC process protocol. The proposed SCADA system has the following advantages: 1) simple (easier to be implemented);2) flexible (able to adapt to its environment dynamic changes);and 3) interoperable (relative to the underlying control systems, which belongs to diverse of vendors). The applicability of the proposed approach is demonstrated by a real case study example carried out in a paper mill.

Multi-agent系统在电力系统中的应用

现代电力系统是一个复杂开放的分布式系统,Multi-agent是分布式人工智能的新技术,能使逻辑上和物理上分散的系统并列、协调地运行得以解决.结合Multi-agent技术的基本原理及适用范围进行了综述.然后针对Multi-agent系统的特征和体系结构重点阐述了在电力系统安全防卫体系、二次电压控制、电力市场和EMS以及发电厂中的应用并指出Multi-agent技术的发展方向.探讨了Multi-agent技术在电力系统其它方面的应用.指明了Multi-agent技术在控制系统组织、自适应能力及智能、交流3方面的研究方向,特别是在新型的电力系统广域协调控制领域的应用前景.

基于Multi-Agent的数据挖掘模型的研究

数据挖掘是人们长期对数据库研究的结果,但是传统的数据挖掘存在低效性和非智能化等不足。随着具有自主性和社会性的智能计算实体Agent的出现和发展,文中将Multi-agent技术应用到数据挖掘中,并提出了基于Multi-agent智能化的数据挖掘模型,讨论了模型的运行过程。这一模型弥补了传统数据挖掘的缺陷和不足,而且在很大程度上提高了数据挖掘的智能性和高效性,减少了人工的参与。

基于multi-agent的仿生物免疫:计算机抗病毒研究新思路

从控制论的角度论述了计算机免疫和生物免疫的相似性 ;讨论了在计算机防病毒领域中应用 m ulti- agent控制技术构筑计算机仿生物免疫系统的可行性和实用性 ;描述了系统实例及其优缺点 ;指出此项新技术的应用前景 。

基于 Multi-Agent 技术的供应链企业信任合作伙伴选择评估模型

提出了基于Multi-Agent技术的供应链企业信任合作伙伴选择评价模型。在模型中,多Agent系统通过连接内外服务器对合作企业进行快速选择。通过不同Agent间相互沟通协调,实现了对合作伙伴信任的动态监督和评估。并且引入信任预警Agent,可及时对合作过程中产生的信任风险发出警报,以提醒企业进行控制和采取必要的措施。通过实例表明,该模型对供应链信任合作伙伴的选择评估不仅快速而且有效,还能反映供应链合作关系的动态变化,具有一定的应用价值。

Multi-agent技术在海上船舶避碰决策系统开发中的应用

计算机控制技术的发展给船舶行业带来了新的发展,为了最大限度保障船舶的航行安全,通过计算机通信技术和智能算法,人们已经能够实现船舶的自动避碰,这极大地降低了船舶的事故率。但是传统的避碰决策系统并不能同时处理大量的船舶航行数据,因此必须借助Multi-agent技术,提高船舶的避碰数据处理速度,在显著提高避碰效果的同时,有效降低了航运成本。本文通过建立基于Multi-agent技术的船舶避碰模型,分析了该技术的应用效果。