Performances and Acoustic Noise of Micro Multi-blade Fan

In this paper, the performances and the acoustic noise of the traditional type micro multi-blade fan were investi- gated experimentally and numerically, to optimize the specifications of the fan for the resident circumstances. The acoustic noise level decreases but the efficiency deteriorates slightly with the increase of the blade number of the impeller. Besides, the acoustic noise decreases with the increase of the distance between the impeller outlet and the volute tongue, in accompanying with the increase of the input and the deterioration of the fan efficiency.

Multi-blade rubbing characteristics of the shaft-disk-blade-casing system with large rotation

Blade rubbing faults cause detrimental impact on the operation of aeroengines. Most of the existing studies on blade rubbing in the shaft-disk-blade-casing(SDBC) system have overlooked the elastic deformation of the blade, while some only consider the whirl of the rotor, neglecting its spin. To address these limitations, this paper proposes a dynamic model with large rotation for the SDBC system. The model incorporates the spin and whirl of the rotor, enabling the realistic reproduction of multiblade rubbing faults. To verify the accuracy of the SDBC model with large rotation and demonstrate its capability to effectively consider the rotational effects such as the centrifugal stiffening and gyroscopic effects, the natural characteristics and dynamic responses of the proposed model are compared with those obtained from reported research and experimental results. Furthermore, the effects of the rotating speed, contact stiffness,and blade number on the dynamic characteristics of the SDBC system with multi-blade rubbing are investigated. The results indicate that the phase angle between the rotor deflection and the unbalance excitation force increases with the increasing rotating speed,which significantly influences the rubbing penetration of each blade. The natural frequency of the SDBC system with rubbing constrain can be observed in the acceleration response of the casing and the torsional response of the shaft, and the frequency is related to the contact stiffness. Moreover, the vibration amplitude increases significantly with the product of the blade number under rubbing, and the rotating frequency approaches the natural frequency of the SDBC system. The proposed model can provide valuable insight for the fault diagnosis of rubbing in bladed rotating machinery.

Numerical investigation on the flow and power of small-sized multi-bladed straight Darrieus wind turbine

Straight Darrieus wind turbine has attractive characteristics such as the ability to accept wind from random direction and easy installation and maintenance. But its aerodynamic performance is very complicated,especially for the existence of dynamic stall. How to get better aerodynamic performance arouses lots of interests in the design procedure of a straight Darrieus wind turbine. In this paper,mainly the effects of number of blades and tip speed ratio are discussed. Based on the numerical investigation,an assumed asymmetric straight Darrieus wind turbine is proposed to improve the averaged power coefficient. As to the numerical method,the flow around the turbine is simulated by solving the 2D unsteady Navier-Stokes equation combined with continuous equation. The time marching method on a body-fitted coordinate system based on MAC (Marker-and-Cell) method is used. O-type grid is generated for the whole calculation domain. The characteristics of tangential and normal force are discussed related with dynamic stall of the blade. Averaged power coefficient per period of rotating is calculated to evaluate the eligibility of the turbine.

Computational Fluid Dynamics Analysis of Multi-Bladed Horizontal Axis Wind Turbine Rotor

The principal objective of this work was to investigate the 3D flow field around a multi-bladed horizontal axis wind turbine (HAWT) rotor and to investigate its performance characteristics. The aerodynamic performance of this novel rotor design was evaluated by means of a Computational Fluid Dynamics commercial package. The Reynolds Averaged Navier-Stokes (RANS) equations were selected to model the physics of the incompressible Newtonian fluid around the blades. The Shear Stress Transport (SST) k-ω turbulence model was chosen for the assessment of the 3D flow behavior as it had widely used in other HAWT studies. The pressure-based simulation was done on a model representing one-ninth of the rotor using a 40-degree periodicity in a single moving reference frame system. Analyzing the wake flow behavior over a wide range of wind speeds provided a clear vision of this novel rotor configuration. From the analysis, it was determined that the flow becomes accelerated in outer wake region downstream of the rotor and by placing a multi-bladed rotor with a larger diameter behind the forward rotor resulted in an acceleration of this wake flow which resulted in an increase the overall power output of the wind machine.

Debris Fan Produced by Failure of Canyon-Blocking Pyroclastic Flows

Ash-rich pyroclastic flows from the cataclysmic eruption of Mount Mazama (~7700 yr. B. P.), Cascade volcanic arc, Oregon, entered and blocked the narrow, bedrock-lined canyon of the Williamson River approximately 35 to 44 km from the source volcano. The blockage impounded a body of water which then released producing four stratigraphic units in the downstream debris fan. The four stratigraphic units are a boulder core comprised of locally sourced bedrock boulders and three sand-rich units including a fine-grained sand unit, a sandy pumice gravel (±basalt/hydrovolcanic tuff) unit, and a pumice pebble-bearing, crystal-rich sand unit. Hand-drilled auger holes up to ~1.6 m deep were used to obtain samples of the sand-rich units. Units were delimited using surface and down-hole observations, composition and texture, estimated density, statistical parameters of grain size, and vertical and lateral distribution of properties. Overtopping followed by rapid incision into the ash-rich pyroclastic flows progressively cleared the canyon, but a bedrock knickpoint near the head of the canyon limited the volume of debris available for transport to about 0.04 km3 to 0.08 km3. Co-deposition of bedrock boulders and lithic-rich sand was followed by rapid deposition with minimal reworking of remobilized pyroclastics. Continued draining of the impounded lake sent hyperconcentrated flows onto the debris fan depositing pumice-rich gravels that graded upward to crystal-rich sands.

广义的Ky Fan定理

矩阵行列式是矩阵分析学中一个很重要的分支,利用矩阵外代数,可以把行列式的计算转换成矩阵的迹算子。首先,从典型的Ky Fan定理出发,给出了该定理的一个等价形式,并且利用Brunn-Minkowski不等式给出了定理的证明。其次,利用凸函数的性质,得到了Ky Fan定理的一个更一般的表示形式。

The Middle Miocene lobe-shaped and band-shaped submarine fans in the Lingshui Sag,Qiongdongnan Basin:source-to-sink system,genesis and implication

Deepwater oil and gas exploration is the key to sustainable breakthroughs in petroleum exploration worldwide.The Central Canyon gas field has confirmed the Lingshui Sag is a hydrocarbon-generating sag,and the deepwater reservoirs in the Lingshui Sag still have more fabulous oil and gas exploration potential.Based on drilling data and three-dimensional(3D)seismic data,this paper uses seismic facies analysis,seismic attribute analysis,and coherence slice analysis to identify the types of submarine fans(lobe-shaped and band-shaped submarine fans)that developed in the Lingshui Sag during the Middle Miocene,clarify the source-to-sink system of the submarine fans and discuss the genesis mechanism of the submarine fans.The results show that:(1)the deepwater source-to-sink system of the Lingshui Sag in the Middle Miocene mainly consisted of a“delta(sediment supply)-submarine canyon(sediment transport channel)-submarine fan(deepwater sediment sink)”association;(2)the main factor controlling the formation of the submarine fans developed in the Lingshui Sag was on the relative sea level decline;and(3)the bottom current reworked the lobe-shaped submarine fan that developed in the northern Lingshui Sag and formed the band-shaped submarine fan with a greater sand thickness.This paper aims to provide practical geological knowledge for subsequent petroleum exploration and development in the deepwater area of the Qiongdongnan Basin through a detailed analysis of the Middle Miocene submarine fan sedimentary system developed in the Lingshui Sag.

双星图的LI矩阵的Ky Fan k-范数

树是连通的无圈图,研究树的拉普拉斯矩阵具有重要的图论和实际意义.设G是一个有n个点和m个边的图,A(G)和D(G)分别是图G的邻接矩阵和对角度矩阵,那么G的拉普拉斯矩阵定义为L(G)=D(G)-A(G).LI矩阵定义为LI(G)=L(G)-(2m/n)I_(n),其中I_(n)是单位矩阵.图的LI矩阵的Ky Fan k-范数代表了拉普拉斯特征值和拉普拉斯特征值平均值之间距离的有序和.研究了双星图的LI矩阵的Ky Fan k-范数,证明了双星图的LI矩阵的Ky Fan k-范数满足文献[6]中提出的猜想.

Coupling relationship and genetic mechanisms of shelf-edge delta and deep-water fan source-to-sink:A case study in Paleogene Zhuhai Formation in south subsag of Baiyun Sag,Pearl River Mouth Basin,China

The coupling relationship between shelf-edge deltas and deep-water fan sand bodies is a hot and cutting-edge field of international sedimentology and deep-water oil and gas exploration.Based on the newly acquired high-resolution 3D seismic,logging and core data of Pearl River Mouth Basin(PRMB),this paper dissected the shelf-edge delta to deep-water fan(SEDDF)depositional system in the Oligocene Zhuhai Formation of Paleogene in south subsag of Baiyun Sag,and revealed the complex coupling relationship from the continental shelf edge to deep-water fan sedimentation and its genetic mechanisms.The results show that during the deposition of the fourth to first members of the Zhuhai Formation,the scale of the SEDDF depositional system in the study area showed a pattern of first increasing and then decreasing,with deep-water fan developed in the third to first members and the largest plane distribution scale developed in the late stage of the second member.Based on the development of SEDDF depositional system along the source direction,three types of coupling relationships are divided,namely,deltas that are linked downdip to fans,deltas that lack downdip fans and fans that lack updip coeval deltas,with different depositional characteristics and genetic mechanisms.(1)Deltas that are linked downdip to fans:with the development of shelf-edge deltas in the shelf area and deep-water fans in the downdip slope area,and the strong source supply and relative sea level decline are the two key factors which control the development of this type of source-to-sink(S2S).The development of channels on the continental shelf edge is conducive to the formation of this type of S2S system even with weak source supply and high sea level.(2)Deltas that lack downdip fans:with the development of shelf edge deltas in shelf area,while deep water fans are not developed in the downdip slope area.The lack of“sources”and“channels”,and fluid transformation are the three main reasons for the formation of this type of S2S system.(3)Fans that lack updip coeval deltas:with the development of deep-water fans in continental slope area and the absence of updip coeval shelf edge deltas,which is jointly controlled by the coupling of fluid transformation at the shelf edge and the“channels”in the continental slope area.

Effects of desert plant communities on soil enzyme activities and soil organic carbon in the proluvial fan in the eastern foothills of the Helan Mountain in Ningxia,China

It is of great significance to study the effects of desert plants on soil enzyme activities and soil organic carbon(SOC)for maintaining the stability of the desert ecosystem.In this study,we studied the responses of soil enzyme activities and SOC fractions(particulate organic carbon(POC)and mineral-associated organic carbon(MAOC))to five typical desert plant communities(Convolvulus tragacanthoides,Ephedra rhytidosperma,Stipa breviflora,Stipa tianschanica var.gobica,and Salsola laricifolia communities)in the proluvial fan in the eastern foothills of the Helan Mountain in Ningxia Hui Autonomous Region,China.We recorded the plant community information mainly including the plant coverage and herb and shrub species,and obtained the aboveground biomass and plant species diversity through sample surveys in late July 2023.Soil samples were also collected at depths of 0–10 cm(topsoil)and 10–20 cm(subsoil)to determine the soil physicochemical properties and enzyme activities.The results showed that the plant coverage and aboveground biomass of S.laricifolia community were significantly higher than those of C.tragacanthoides,S.breviflora,and S.tianschanica var.gobica communities(P<0.05).Soil enzyme activities varied among different plant communities.In the topsoil,the enzyme activities of alkaline phosphatase(ALP)andβ-1,4-glucosidas(βG)were significantly higher in E.rhytidosperma and S.tianschanica var.gobica communities than in other plant communities(P<0.05).The topsoil had higher POC and MAOC contents than the subsoil.Specifically,the content of POC in the topsoil was 18.17%–42.73%higher than that in the subsoil.The structural equation model(SEM)indicated that plant species diversity,soil pH,and soil water content(SWC)were the main factors influencing POC and MAOC.The soil pH inhibited the formation of POC and promoted the formation of MAOC.Conversely,SWC stimulated POC production and hindered MAOC formation.Our study aimed to gain insight into the effects of desert plant communities on soil enzyme activities and SOC fractions,as well as the drivers of SOC fractions in the proluvial fan in the eastern foothills of the Helan Mountain and other desert ecosystems.

FAN1基因c.1799A>T突变与巨核细胞性间质性肾炎的关联

目的探究巨核细胞性间质性肾炎(KIN)与FAN1基因突变的关联性。方法2022年10月,发现一个家族聚集性肾炎家系。对家系成员进行全外显子组测序以确定候选基因,并通过Alpine分析、遗传变异判读和Sanger测序分析该基因。结果肾病家系先证者临床表型为肾炎,先证者母亲检出FAN1基因c.1799A>T突变。对家系中杂合性成员采用Sanger测序,也检测到相同的突变基因,依据美国医学遗传学与基因组学学会(ACMG)推荐指南,将其归类为意义不明的基因突变。本研究中的家系性肾炎表型与KIN部分相符。结论本研究中家系性肾炎的表型与FAN1基因c.1799A>T位点突变有密切关联。

Temperature-Based Fan Speed Optimization Strategy

As energy efficiency and indoor comfort increasingly become key standards in modern residential and office environments,research on intelligent fan speed control systems has become particularly important.This study aims to develop a temperature-feedback-based fan speed optimization strategy to achieve higher energy efficiency and user comfort.Firstly,by analyzing existing fan speed control technologies,their main limitations are identified,such as the inability to achieve smooth speed transitions.To address this issue,a BP-PID speed control algorithm is designed,which dynamically adjusts fan speed based on indoor temperature changes.Experimental validation demonstrates that the designed system can achieve smooth speed transitions compared to traditional fan systems while maintaining stable indoor temperatures.Furthermore,the real-time responsiveness of the system is crucial for enhancing user comfort.Our research not only demonstrates the feasibility of temperature-based fan speed optimization strategies in both theory and practice but also provides valuable insights for energy management in future smart home environments.Ultimately,this research outcome will facilitate the development of smart home systems and have a positive impact on environmental sustainability.

全自动运行列车制动电阻液压风机自动控制方法研究

全自动运行列车制动电阻液压风机是一种利用液压技术驱动的设备,在列车运行过程中,其性能受到多个因素影响,容易导致输出气流或气压不稳定问题,因此研究全自动运行列车制动电阻液压风机的自动控制技术具有重要意义。在列车与轨道间作用力的基础上,构建列车制动模型,获取制动力矩,将相对扭转角作为基础,计算自旋蠕滑力矩,根据瞬时蠕滑速度,计算出列车车轮与轨道间的粘着力矩;构建列车驱动模型,建立制动力矩主动分配目标函数,利用Park变换和Clarke变换,获取电阻液压风机电磁转矩,通过转子磁链与控制频率实现电阻液压风机的自动控制。实验结果表明:该控制方法在列车制动控制过程中,其风机效率及恒速占比均值分别为5.26 s和99.77%,控制电阻后的风机电压与理想电压基本一致,能够高效恒定的实现制动电阻液压风机控制,提高列车的安全性。

基于Ansys workbench煤矿风机主轴有限元分析

煤矿风机在煤矿生产工作中起着重要的作用,风机主轴是风机的核心零件。针对风机主轴受到径向载荷和轴向载荷的影响是否会导致主轴损坏的问题,依据现实煤矿生产环境和条件,构建轴流式煤矿风机模型,对风机主轴进行静力学分析,根据主轴静力学分析中出现的主轴应力集中现象提出解决方案。对风机主轴进行优化设计,重新进行静力学分析,消除应力集中现象。采用模态分析法对风机主轴的强度性能和刚度性能进行检测,最后通过搭建试验平台对仿真结果进行验证。结果表明,当风机机主轴径向与轴向同时增加载荷时,风机主轴在工作过程中可安全可靠的运行。

Foreign Object Damage to Fan Rotor Blades of Aeroengine Part II: Numerical Simulation of Bird Impact

Bird impact is one of the most dangerous threats to flight safety. The consequences of bird impact can be severe and, therefore, the aircraft components have to be certified for a proven level of bird impact resistance before being put into service. The fan rotor blades of aeroengine are the components being easily impacted by birds. It is necessary to ensure that the fan rotor blades should have adequate resistance against the bird impact, to reduce the flying accidents caused by bird impacts. Using the contacting-impacting algorithm, the numerical simulation is carded out to simulate bird impact. A three-blade computational model is set up for the fan rotor blade having shrouds. The transient response curves of the points corresponding to measured points in experiments, displacements and equivalent stresses on the blades are obtained during the simulation. From the comparison of the transient response curves obtained from numerical simulation with that obtained from experiments, it can be found that the variations in measured points and the corresponding points of simulation are basically the same. The deforming process, the maximum displacements and the maximum equivalent stresses on blades are analyzed. The numerical simulation verifies and complements the experiment results.

矩阵Hadamard积和Fan积的特征值界的一些新估计式（英文）

本文研究了非奇异M-矩阵A与B的Fan积的最小特征值下界和非负矩阵A与B的Hadamard积的谱半径上界的估计问题.利用Brauer定理,得到了一些只依赖于矩阵的元素且易于计算的新估计式,改进了文献[41现有的一些结果.

M矩阵Fan乘积的Oppenheim不等式

对两个Ｍ 矩阵的Ｆａｎ 乘积，给出了Ｏｐｐｅｎｈｅｉｍ 不等式的推广，其结果加强了Ｔ．Ａｎｄｏ

M-矩阵和H-矩阵在Fan积下的Oppenheim型不等式

M-矩阵和H-矩阵在数学物理、经济学、数学规划等领域中有广泛的应用.对于一般的M-矩阵,是否成立著名的O ppenheim型不等式,文[1]给出了答案.本文建立了一个M-矩阵和一个H-矩阵在Fan积下的O ppenheim型不等式.

基于FANS的温室风机通风性能测试

试验采用Fansassessmentnumerationsystem（FANs）为现场监测系统，利用位置上下移动持续运行的螺旋桨风速计和静压传感器对风机通风性能进行测试。试验共测定3个玻璃温室内3种类型共9个排风风机在不同工况下静压5．O～61．5Pa范围内的通风量和能源消耗。结果显示，风机防护网的存在及清洁状况对通风量的影响低于5％；塑料百叶窗风机比相同配置的铝制百叶窗风机通风量和能效分别平均高13．1％、15．1％；参数完全相同的风机能效差异最高达12．7％；胶带驱动的风机转速减少16．1％时通风量平均降低38．7％；温室内静压超过30Pa时风机能耗显著增加。

T关于M矩阵的Fan乘积的Oppenheim型不等式(英文)

首先指出张胜关于M-矩阵Fan乘积的行列式下界的估计不比两个M矩阵的Fan乘积的Oppenheim型不等式的结果好,然后进一步推广了两个M矩阵的Fan乘积的Oppenheim型不等式,并且说明推广的结果优于已知的张胜的结论.