A master-slave generalized predictive synchronization control for preheating process of multi-cavity hot runner system

As a key component of injection molding,multi-cavity hot runner(MCHR)system faces the crucial problem of polymer melt filling imbalance among the cavities.The thermal imbalance in the system has been considered as the leading cause.Hence,the solution may rest with the synchronization of those heating processes in MCHR system.This paper proposes a’Master-Slave’generalized predictive synchronization control(MS-GPSC)method with’Mr.Slowest’strategy for preheating stage of MCHR system.The core of the proposed method is choosing the heating process with slowest dynamics as the’Master’to track the setpoint,while the other heating processes are treated as‘Slaves’tracking the output of’Master’.This proposed method is shown to have the good ability of temperature synchronization.The corresponding analysis is conducted on parameters tuning and stability,simulations and experiments show the strategy is effective.

A novel multi-cavity Helmholtz muffler

A novel multi-cavity Helmholtz muffler is proposed. The multi-cavity Helmholtz muffler is composed of steel structures and silicone membranes. With suitable construction, the Helmholtz muffler can be designed to exhibit negative mass density in low frequency, and the muffling frequency can be adjusted when we change the internal structure of the cavity,which will be very attractive for noise control. In this paper, we investigate the influence of the membranes and the cavities on noise reduction characteristics with theoretical calculations and simulations. The results show that the numbers of membranes and the volumes of the cavities can have a great effect on the position of the muffling frequency. The number of cavities can have a great effect on the width of the muffling frequency(reduce the noise by 10 dB). With different combinations of the membranes and cavities, we can get different muffling frequencies, which can meet different muffling demands in practical applications and is more flexible than the traditional Helmholtz cavity.

Selection of the Optimal Cooling Parameters to the Multi-Cavity Die

This study is subject to the finite element and abd uc tive network method application in the multi-cavity die. In order to select the optimal cooling system parameters to minimize the warp of a die-casting die, t he Taguchi’s method and the abductive network are used. These methods are appli ed to create an efficient model with functional nodes for the considered problem . Once the cooling system parameters are developed, this network can be used to predict the warp for the die-casting die accurately. A simulated annealing (SA) optimization algorithm with a performance index is then applied to the neur al network for searching the optimal cooling system parameters, and obtain rathe r satisfactory result as compared with the corresponding finite element veri fication.

Protection of entanglement between two V-atoms in a multi-cavity coupling system

The protection of the entanglement between two V-atoms(EBTVA)in a multi-cavity coupling system is studied.The whole system consists of two V-atoms.The two V-atoms are initially in the maximum entangled state and interacts locally with its own dissipative cavity which is coupled to the external cavities with high quality factor(ECWHQF).The results show that,when there is no ECWHQF,the EBTVA can be protected effectively in the case where the V-atom and the dissipative cavity are weak coupled in large detuning,while when there are different numbers n of ECWHQF coupled to two dissipative cavities,by adjusting the parameters of the number n of ECWHQF and the coupling strength k between cavities,the EBTVA can be protected perfectly and continuously.Our result provides an effective method for protecting entanglement resources of three-level system.

Bending Prediction Method of Multi-Cavity Soft Actuator

The multi-cavity soft actuator is assembled from single-cavity soft actuator through a reasonable geometric distribution.It has the characteristic that the pneumatic soft actuator is driven by its own deformation and has more degrees of freedom.Pneumatic soft actuator is widely used as an emerging discipline and its strong compliance has been greatly developed and applied.However,as the most application potential type of soft actuators,there is still a lack of simple and effective deformation prediction methods for studying the spatial deformation of multi-cavity soft actuators.To solve this problem,a vector equation method is proposed based on the analysis of the principle of the space deformation of the two-cavity,three-cavity and four-cavity soft actuators.Furthermore,a nonlinear mathematical model of the air pressure,space position and deformation trajectory of the soft actuator end is established by combining the vector equation method.Finally,the three-channel soft actuator is verified through experiments.The results show that the mathematical model can better predict the space deformation trajectory of the soft actuator,which provides a new research method for studying the space deformation of the multi-channel soft actuator.

MAIN TOPICS, ABSTRACTS ＆ KEY WORDS

China Z15 Tower is a super high-rise building, frame tube composed by the multi-cavity pillars, thestructure is a new member which develops at the form of an ordinary box and concrete column. Four super multi-cavitypillars are from the basement through to the top of the structure, thus the precision of frame column is particularlyimportant. In this paper, combination of the analysis and research of super multi-cavity pillars＇ productiontechnology, focusing on the manufacture technology of two-way tilt tian-glyph giant pillars, to ensure the quality ofconstruction giant column lay a solid foundation.