A multi-gap and multi-channel gas switch with convexo-convex discal planet electrodes was designed and investigated. Eight gaps are formed in series by a trigger electrode, six intermediate electrodes and two high vol...A multi-gap and multi-channel gas switch with convexo-convex discal planet electrodes was designed and investigated. Eight gaps are formed in series by a trigger electrode, six intermediate electrodes and two high voltage electrodes with a uniform gap length of 5 ram. The self breakdown and triggered breakdown performance of the switch are reported. Both the delay time and jitter decrease with the increase in the trigger voltage, switching coefficient and the decrease in the trigger isolating resistor. The delay time of the switch is about 40 ns, and the jitter is less than 2 ns when charged with 4-85 kV and triggered by a voltage pule of -75 kV. The inductance of the switch is about 30 nH.展开更多
A coaxial multi-gap multi-channel spark switch with stainless-steel-spring ring gap electrodes is designed and investigated. The switch is triggered by a pulse applied to the cylindrical electrode outside the discharg...A coaxial multi-gap multi-channel spark switch with stainless-steel-spring ring gap electrodes is designed and investigated. The switch is triggered by a pulse applied to the cylindrical electrode outside the discharging channel through a parasitic capacitance coupling. The jitter of the switch is reduced by several short-distance gas gaps in series, and its inductance is reduced by a multi-channel discharge on account of the inductance isolation between the coils of the spring ring electrode. The experimental results indicate that the switch is of low inductance (15-30 nH), low jitter (-3 ns), and stable breakdown performance展开更多
This paper describes the detailed desi gn of data acquisition device with multi-channel and high-precision for aerosp ace.Based on detailed analysis of the advantages and disadvantages of tw o common acquisition circu...This paper describes the detailed desi gn of data acquisition device with multi-channel and high-precision for aerosp ace.Based on detailed analysis of the advantages and disadvantages of tw o common acquisition circuits,the design factors of acquisition device focus o n accuracy,sampling rate,hardware overhead and design space.The me chanical structure of the system is divided into different card layers according to different functions and the structure has the characteristics of high reliability,conveni ence to install and scalability.To ens ure reliable operation mode,the interface uses the optocoupler isolated from th e e xternal circuit.The transmission of signal is decided by the current in the cur rent loop that consists of optocouplers between acquisition device and t est bench.In multi-channel switching circuit,by establ ishing analog multiplexer model,the selection principles of circuit modes are given.展开更多
Based on mirror-blocks, a totally coded algorithm （TCA） for switched-current （SI） network analysis in frequency domain is presented. The algorithm is simple, available, and suitable for any swltched-current networ...Based on mirror-blocks, a totally coded algorithm （TCA） for switched-current （SI） network analysis in frequency domain is presented. The algorithm is simple, available, and suitable for any swltched-current networks. A basis of analysis and design for switched-current networks via this algorithm is provided.展开更多
In Ambient Assistant Living(AAL) systems, it is a fundamental problem to ensure prompt delivery of detected events, such as irregular heart rate or fall of elderly, to a central processing device(e.g. gateway node). M...In Ambient Assistant Living(AAL) systems, it is a fundamental problem to ensure prompt delivery of detected events, such as irregular heart rate or fall of elderly, to a central processing device(e.g. gateway node). Most of recently proposed MAC protocols for low-power embedded sensing systems(e.g. wireless sensor networks) are designed with energy efficiency as the first goal, so they are not suitable for AAL systems. Although some multi-channel MAC protocols have been proposed to address the problem, most of those protocols ignore the cost of channel switching, which can have reverse effect on network performance, especially latency of data delivery. In this paper, we propose a Delay-Sensitive Multi-channel MAC protocol(DS-MMAC) for AAL systems, which can provide high packet delivery ratio and bound low latency for data delivered to the gateway node. The novelty of the protocol is that an efficient distributed time slot scheduling and channel assignment algorithm is combined with the process of route establishment, which takes the channel switching cost into account and reduces endto-end delay to meet the required delay bound of each data flow. The performance of the proposed protocol is evaluated through extensive simulations. Results show that DS-MMAC can bound low latency for delivering detected events in AAL system to the gateway, while providing high delivery reliability and low energy consumption.展开更多
为满足5.8 GHz雷达系统的需要,在HLMC55LP工艺中设计了一款12 bit SAR ADC,ADC的采样率为500 kHz/250 kHz两档可调,采用单调电容开关时序,且在电容阵列的高位部分加上2个冗余位设计,该冗余位对高位的CDAC建立误差,比较器误差都有一定的...为满足5.8 GHz雷达系统的需要,在HLMC55LP工艺中设计了一款12 bit SAR ADC,ADC的采样率为500 kHz/250 kHz两档可调,采用单调电容开关时序,且在电容阵列的高位部分加上2个冗余位设计,该冗余位对高位的CDAC建立误差,比较器误差都有一定的容忍能力,可以带来ADC性能上的提升。系统采用上极板采样,可以在采样周期结束的瞬间就开始逐位比较过程,省去了采用底极板采样第一拍CDAC建立的过程,提高了转换速度,相对于底极板采样也节省了一定的开关功耗。后仿结果表明,模拟输入20 kHz差分中频信号,在500 kHz采样频率,3.3 V电源电压下,ADC的有效位数为11.56 bit,SNR为71.04 dB,SFDR为80.37 dBc,功耗约为2 mW。展开更多
Multifunctional switchable materials are attracting tremendous interest because of their great application potential in signal processing,information encryption,and smart devices.Here,we reported an organic-inorganic ...Multifunctional switchable materials are attracting tremendous interest because of their great application potential in signal processing,information encryption,and smart devices.Here,we reported an organic-inorganic hybrid thermochromic ferroelastic crystal,[TMIm][CuCl_(4)](TMIm=1,1,3,3-tetramethylimidazolidinium),which undergoes two reversible phase transitions at 333 K and 419 K,respectively.Intriguingly,these three phases experience a remarkable ferroelastic-paraelastic-ferroelastic(2/m-mmm-2/m)transition,which remains relatively unexplored in ferroelastics.Moreover,the ferroelastic domains can be simultaneously switched under temperature and stress stimuli.Meanwhile,[TMIm][CuCl_(4)]exhibits thermochromic phenomenon,endowing it with extra spectral encryption possibilities during information processing.Combined with dielectric switching behavior,[TMIm][Cu Cl_(4)]are promising for practical applications in memory devices,next-generation sensors,and encryption technology.展开更多
A multiplexer with a low-distortion high-bandwidth analog switch is presented. The gate-to-source voltage of the switch is set by the combined on-voltage of a pMOS and an nMOS,and the difference between its gate-sourc...A multiplexer with a low-distortion high-bandwidth analog switch is presented. The gate-to-source voltage of the switch is set by the combined on-voltage of a pMOS and an nMOS,and the difference between its gate-source voltage and the threshold voltage （VGST） is guaranteed to be constant with input variation. Thus, the body effect is nearly canceled. Implemented in a TSMC 0.18μm CMOS process, results from HSPICE simulation show that the VGST is nearly constant with an input range from 0.3 to 1.7V,and the - 3dB bandwidth is larger than 10GHz;the SFDR （spurious free dynamic range） of the output is 67. lldB with 1GHz input frequency; the turn-on time is 2.98ns,and the turn-off time is 1.35ns, which indicates a break-before-make action of the multiplexer. The proposed structure can be applied to high speed signal transmission.展开更多
基金supported by National Natural Science Foundation of China(Nos.50477019,50637010)the State Key Laboratory of Electrical Insulation and Power Equipment of China(EIPE.09207)
文摘A multi-gap and multi-channel gas switch with convexo-convex discal planet electrodes was designed and investigated. Eight gaps are formed in series by a trigger electrode, six intermediate electrodes and two high voltage electrodes with a uniform gap length of 5 ram. The self breakdown and triggered breakdown performance of the switch are reported. Both the delay time and jitter decrease with the increase in the trigger voltage, switching coefficient and the decrease in the trigger isolating resistor. The delay time of the switch is about 40 ns, and the jitter is less than 2 ns when charged with 4-85 kV and triggered by a voltage pule of -75 kV. The inductance of the switch is about 30 nH.
基金This work was supported by the National Natural Science Foundation of China, Grant No. 10035020
文摘A coaxial multi-gap multi-channel spark switch with stainless-steel-spring ring gap electrodes is designed and investigated. The switch is triggered by a pulse applied to the cylindrical electrode outside the discharging channel through a parasitic capacitance coupling. The jitter of the switch is reduced by several short-distance gas gaps in series, and its inductance is reduced by a multi-channel discharge on account of the inductance isolation between the coils of the spring ring electrode. The experimental results indicate that the switch is of low inductance (15-30 nH), low jitter (-3 ns), and stable breakdown performance
基金National Natural Science Foundation of China (No.50905169)
文摘This paper describes the detailed desi gn of data acquisition device with multi-channel and high-precision for aerosp ace.Based on detailed analysis of the advantages and disadvantages of tw o common acquisition circuits,the design factors of acquisition device focus o n accuracy,sampling rate,hardware overhead and design space.The me chanical structure of the system is divided into different card layers according to different functions and the structure has the characteristics of high reliability,conveni ence to install and scalability.To ens ure reliable operation mode,the interface uses the optocoupler isolated from th e e xternal circuit.The transmission of signal is decided by the current in the cur rent loop that consists of optocouplers between acquisition device and t est bench.In multi-channel switching circuit,by establ ishing analog multiplexer model,the selection principles of circuit modes are given.
文摘Based on mirror-blocks, a totally coded algorithm （TCA） for switched-current （SI） network analysis in frequency domain is presented. The algorithm is simple, available, and suitable for any swltched-current networks. A basis of analysis and design for switched-current networks via this algorithm is provided.
基金supported by the International S&T Cooperation Program of China (ISTCP) under Grant No. 2013DFA10690the National Science Foundation of China (NSFC) under Grant No. 61100180
文摘In Ambient Assistant Living(AAL) systems, it is a fundamental problem to ensure prompt delivery of detected events, such as irregular heart rate or fall of elderly, to a central processing device(e.g. gateway node). Most of recently proposed MAC protocols for low-power embedded sensing systems(e.g. wireless sensor networks) are designed with energy efficiency as the first goal, so they are not suitable for AAL systems. Although some multi-channel MAC protocols have been proposed to address the problem, most of those protocols ignore the cost of channel switching, which can have reverse effect on network performance, especially latency of data delivery. In this paper, we propose a Delay-Sensitive Multi-channel MAC protocol(DS-MMAC) for AAL systems, which can provide high packet delivery ratio and bound low latency for data delivered to the gateway node. The novelty of the protocol is that an efficient distributed time slot scheduling and channel assignment algorithm is combined with the process of route establishment, which takes the channel switching cost into account and reduces endto-end delay to meet the required delay bound of each data flow. The performance of the proposed protocol is evaluated through extensive simulations. Results show that DS-MMAC can bound low latency for delivering detected events in AAL system to the gateway, while providing high delivery reliability and low energy consumption.
基金supported by the National Natural Science Foundation of China(Nos.21975114,11904151 and 22105094)。
文摘Multifunctional switchable materials are attracting tremendous interest because of their great application potential in signal processing,information encryption,and smart devices.Here,we reported an organic-inorganic hybrid thermochromic ferroelastic crystal,[TMIm][CuCl_(4)](TMIm=1,1,3,3-tetramethylimidazolidinium),which undergoes two reversible phase transitions at 333 K and 419 K,respectively.Intriguingly,these three phases experience a remarkable ferroelastic-paraelastic-ferroelastic(2/m-mmm-2/m)transition,which remains relatively unexplored in ferroelastics.Moreover,the ferroelastic domains can be simultaneously switched under temperature and stress stimuli.Meanwhile,[TMIm][CuCl_(4)]exhibits thermochromic phenomenon,endowing it with extra spectral encryption possibilities during information processing.Combined with dielectric switching behavior,[TMIm][Cu Cl_(4)]are promising for practical applications in memory devices,next-generation sensors,and encryption technology.
文摘A multiplexer with a low-distortion high-bandwidth analog switch is presented. The gate-to-source voltage of the switch is set by the combined on-voltage of a pMOS and an nMOS,and the difference between its gate-source voltage and the threshold voltage （VGST） is guaranteed to be constant with input variation. Thus, the body effect is nearly canceled. Implemented in a TSMC 0.18μm CMOS process, results from HSPICE simulation show that the VGST is nearly constant with an input range from 0.3 to 1.7V,and the - 3dB bandwidth is larger than 10GHz;the SFDR （spurious free dynamic range） of the output is 67. lldB with 1GHz input frequency; the turn-on time is 2.98ns,and the turn-off time is 1.35ns, which indicates a break-before-make action of the multiplexer. The proposed structure can be applied to high speed signal transmission.
