Jamming Assisted Covert Wireless Communication in Multi-Channel Systems

This paper investigates the jammerassisted multi-channel covert wireless communication(CWC)by exploiting the randomness of sub-channel selection to confuse the warden.In particular,we propose two sub-channel selection transmission schemes,named random sub-channel selection(RSS)scheme and maximum sub-channel selection(MSS)scheme,to enhance communication covertness.For each proposed scheme,we first derive closed-form expressions of the transmission outage probability(TOP),the average effective rate,and the minimum average detection error probability(DEP).Then,the average effective covert rate(ECR)is maximized by jointly optimizing the transmit power at the transmitter and the number of sub-channels.Numerical results show that there is an optimal value of the number of sub-channels that maximizes the average ECR.We also find that to achieve the maximum average ECR,a larger number of subchannels are needed facing a stricter covertness constraint.

Serial Communications Programming in Windows95 with API Functions

This paper introduces the usage of these functions. It presents the technique of how to program with them to perform the serial communications between a computer and other digital devices by the serial porst in Windows95. The related sample codes of the applications of this technique written in C++ programming language are also given. This technique is applied successfully to receive the data of the radio noise from a frequency monitor.

The Serial Communication Based on Multithreading Technique of Windows

Present a kind of method which is used to communicate between serial serial port and peripheral equipment dynamicly and real-time using multithreading technique based on the basic principle of communication and multitasking mechanism in the circumstance of Windows. This method resolves the question of Real-time answering in the serial communication validly, reduces losing rate of data and improves reliability of system. This article presents a general method used in the serial communication which is practical.

Acoustic MIMO Communications in a Very Shallow Water Channel

Underwater acoustic channels pose a great difficulty for the development of high speed communication due to highly limited band-width as well as hostile multipath interference. Enlightened by rapid progress of multiple-input multiple-output （MIMO） technologies in wireless communication scenarios, MIMO systems offer a potential solution by enabling multiple spatially parallel communication channels to improve communication performance as well as capacity. For MIMO acoustic communications, deep sea channels offer substantial spatial diversity among multiple channels that can be exploited to address simultaneous multipath and co-channel interference. At the same time, there are increasing requirements for high speed underwater communication in very shallow water area （for example, a depth less than 10 m）. In this paper, a space-time multichannel adaptive receiver consisting of multiple decision feedback equalizers （DFE） is adopted as the receiver for a very shallow water MIMO acoustic communication system. The performance of multichannel DFE receivers with relatively small number of receiving elements are analyzed and compared with that of the multichannel time reversal receiver to evaluate the impact of limited spatial diversity on multi-channel equalization and time reversal processing. The results of sea trials in a very shallow water channel are presented to demonstrate the feasibility of very shallow water MIMO acoustic communication.

A communication-aware scheduling algorithm for heterogeneous systems

Previous work mostly employs an ideal system model that assumes fully connected processors and concurrent communication, which leads to inaccurate and inegicient schedule results. In this paper, a new scheduling model which integrates the communication awareness was proposed. Then, a novel scheduling algorithm based on list heuristic was put forward for the new model, which can produce optimal schedule by serializing the communications edges. Experimental results show that the accuracy and efficiency of the new model and algorithm are significantly improved.

A Novel Design of Efficient Multi-channel UART Controller Based on FPGA

In traditional universal asynchronous receiver transmitter （UART） controller, the data transmission is inefficient and the data bus utilization ratio is low. A novel design is provided to solve these problems. The architecture of the system is introduced, the flow charts of data processing as well as the implementation state machine are also presented in detail. This paper is concluded by comparing the performance of this design, which is realized on field programmable gate army （FPGA） using Verilog hardware description language （HDL）, with other traditional UART controllers.

Application of Serial Port in Industrial Computer System

In an industrial computer control system, if a communication with a single chip computer built with the aid of serial port I/O ports can be got easily to connect with equipment. Meanwhile, the system reliability would be improved and the system cost would be reduced.To save ±15 V power supply and electrical level convert circuit,the author provide a simple interface circuit and operational procedure between PC and the single chip computer in this paper. The application of multithread is introduced and the advantages of data acquisition and processing with multithread are also analyzed.

Optimization of Serial Port of General Flex Pendant for Industrial Robot

In order to further improve the serial ports communication mode of the general Flex Pendant for industrial robot,a multiple serial communication mode is put forward. It is used to meet the stability of data transmission,transmission distance,transmission speed,anti-interference and cost-effective. Using ADUM1201 single direction dual channel digital isolator,two pieces of MAX13487 E and a piece of MAX3232 chip to transmit data and files, and to control chip’ s electrical level. Selecting the RS232, RS422 and RS485 communication mode,the serial ports of the general Flex Pendant of industrial robot is optimized.

Network-Wide Time Synchronization in Multi-Channel Wireless Sensor Networks

Recent advances in wireless sensor technology have enabled simultaneous exploitation of multiple channels in wireless sensor systems. In this paper, a novel time synchronization algorithm is proposed for multi- channel Wireless Sensor Networks (WSNs) called Multi-Channel Time Synchronization (MCTS) protocol. Time synchronization is critical for many WSN applications and enables efficient communications between sensor nodes along with intelligent spectrum access. Contrary to many existing protocols that do not exploit multi-channel communications, the protocol takes advantage of potential multiple channels and distributes the synchronization of different nodes to distinct channels and thus, reduces the convergence time of synchronization processes significantly.

On-Board Data Acquisition System for Automatic Shift System of Vehicle

Data acquisition, analysis and calibrating system affiliated with the vehicle is developed for the research on the automatic shift system (ASS). Considering the vehicle’s hard environment such as vibration, high and low temperature, electromagnetic disturbance and so on, the most suitable project is selected. PC104 transfers data with ECU by serial communication and a solid state disk is used as a FLASH ROM. Some techniques including frequency division of data is adopted in the software design in order to ensure the sampling frequency. The analysis and debug software is also contrived according to the characteristic of the ASS. The system plays an important role in the development of the ASS because of the good reliability and practicability in the application.

DESIGN OF A NOVEL DEXTEROUS ROBOT HAND

In the robotic community more and more hands are developed. Based on theexperience of HIT Hand and DLR Hand II, a smaller and easier manufactured dexterous robot hand withmultisen-sory function and high integration is jointly developed. The prototype of the hand issuccessfully built. It has 4 fingers in total 13-DOFs (degree of freedom). Each finger has 3-DOFsand 4 joints, the last 2 joints are mechanically coupled by means of four-bar linkage mechanism. Italso has an additional DOF to realize motion of the thumb relative to the palm. The fingertip forcecan reach up to 10 N. Full integration of mechanical body, actuation system, multisensory system andelectronics is a significant feature. DSP based control system is implemented in PCI busarchitecture and the serial communication between the hand and DSP needs only 2 lines.

Research on network integration technology of observation stations

According to the phenomenon of "four more"and"four low "problems in the observation stations,the surface-based meteorological observing system can't adapt to the change of the adaptive observation equipment and reduce of business intensification. A station integrated system is proposed,w hich can be configured,connected and extended to all kinds of observation equipment. And the integrated processor is designed,supporting a variety of communication interface standards. Flexible configuration,connection and expansion betw een conventional and new type of meteorological observation equipment are supported. It is capable for online calibration and maintenance of observation equipment. The effectiveness of automatic observation equipment is totally achieved to provide basic information support for disaster prevention and mitigation and national economic development.

基于PDA的陀螺全站仪通信与数据处理系统研究与开发

讨论在嵌入式操作系统WindowsCE下以PDA作为一个数据接口实现了陀螺寻北仪和全站仪之间接口通信,并将PDA采集到的陀螺寻北仪定向数据和全站仪测得的测量数据进行实时处理,得到贯通测量定向数据。

Adjusting the Parameters of PI Regulator in All-electrical Tank Gun Control System by Computer Program

Both the traverse subsystem and the elevation subsystem of the all-electrical tank gun control system are composed of electrical drive control system respectively. The parameters of PI regulator in these electrical drive control systems affect the performance of the control system seriously. Up to now, there is not a simple and practical method for choosing regulator parameters, which are usually determined by repeated and continual readjustment. This method is low efficient, and the parameters got are not always optimal. A method for on-line adjusting the parameters of PI regulator in the electrical drive control system by computer program is introduced in this paper. The function of adjusting PI parameters of the electrical drive control system is realized by PC program written by VC++ and controlling program written by assemble language and by the communication between PC and DSP completed by the control MSCOMM in VC++6.0. The method as mentioned above which is applied for an all-electrical tank gun control system under development is proved very available, a better performance might be obtained for the all-electrical tank gun control system easily.

Windows and Fieldbus Based Software Computer Numerical Control System

Computer numerical control(CNC)system is the base of modern digital and intelligent manufacturing technolo- gy.And opened its architecture and constituted based on PC and Windows operating system(OS)is the main trend of CNC sys- tem.However,even if the highest system priority is used in user mode,real-time capability of Windows(2000,NT,XP)for applications is not guaranteed.By using a device driver,which is running in kernel mode,the real time performance of Windows can be enhanced greatly.The acknowledgment performance of Windows to peripheral interrupts was evaluated.Harmonized with an intelligent real-time serial communication bus(RTSB),strict real-time performance can be achieved in Windows platform. An opened architecture software CNC system which is hardware independence is proposed based on PC and RTSB.A numerical control real time kernel(NCRTK),which is implemented as a device driver on Windows,is used to perform the NC tasks.Tasks are divided into real-time and non real-time.Real-time task is running in kernel mode and non real-time task is running in user mode.Data are exchanged between kernel and user mode by DMA and Windows Messages.

Intelligent Control System of Textile Mill's Air-conditioning

This paper briefly analyzes the present situation of textile mill＇s air-conditioning system. Since it is difficult to establish detailed math model to control a textile mill＇s airconditioning system because of the influence of various factors such as the differences in seasons, regions, etc., most air-conditioning equipment can not be controlled automatically. This paper suggests utilizing multi-function data acquisRion card to collect the data about the temperature and humidity of a workshop, processing the data on a PC, comparing them with the expert database, and then using the 485 serial port expanding module to output the parameters, which are used to control the inverter, so that the purpose of adjusting the temperature and humidity of the workshop is achieved.

The New Media Engine for Promoting Chinese Cultural Diffusion： A Case Study of＂Confucius Institute Online＂

As a developing Non-profit Organization （NPO） system for the learning and diffusion of Chinese language and culture around the globe, the Confucius Institute network is becoming more and more important for China＇s presence and influence in a diversified arena of world cultures. While this network is being enlarged and improved with the Chinese govemment＇s persistent backing, it is, however, recognized that the influence and efficiency of the institutes are still limited. It might not be essential whether people come primarily as serious language learners, but necessarily, the platform has to be attractive enough for a considerable proportion of users to stick on, making the Confucius Institute System a sustainable cultural service provider. Within the background of information society, the Intemet, mobile service, digital broadcasting, and other types of new media would act as an important effort to help Confucius Institutes to improve the capabilities of interacting with users, offering users with abundant media-rich content, and minimizing users＇ inconvenience by enhancing users＇ experience, lowering travel and time cost, and easily providing multi-lingual support. In this paper, we take the platform of Confucius Institute Online （http：//www.chinese.cn, the official Intemet portal of the Confucius Institute network） as a case of actuality to analyze how the Confucius Institute system could utilize the communication capability of new media to enrich, enlarge, and enhance the diffusion of Chinese culture and language. Advantages and deficiencies of the planning, design, and layout of the portal＇s functionality and views are presented, upon which a number of strategic suggestions are raised, for the sake of further improvement of Confucius Institute＇s efficiency in cultural diffusion and sustainable development.

A VHDL application for kinematic equation solutions of multi-degree-of-freedom systems

As kinematic calculations are complicated, it takes a long time and is difficult to get the desired accurate result with a single processor in real-time motion control of multi-degree-of-freedom(MDOF) systems. Another calculation unit is needed, especially with the increase in the degree of freedom. The main central processing unit(CPU) has additional loads because of numerous motion elements which move independently from each other and their closed-loop controls. The system designed is also complicated because there are many parts and cabling. This paper presents the design and implementation of a hardware that will provide solutions to these problems. It is realized using the Very High Speed Integrated Circuit Hardware Description Language(VHDL) and field-programmable gate array(FPGA). This hardware is designed for a six-legged robot and has been working with servo motors controlled via the serial port. The hardware on FPGA calculates the required joint angles for the feet positions received from the serial port and sends the calculated angels to the servo motors via the serial port. This hardware has a co-processor for the calculation of kinematic equations and can be used together with the equipment that would reduce the electromechanical mess. It is intended to be used as a tool which will accelerate the transition from design to application for robots.