Retrieving analog images from a scanning electron microscopewith a synchronous data acquisition method

In this work,an old scanning electron microscope(SEM)is refurbished to enhance its image processing capability.How to digitally sample and process an analog image is also presented.An NI PCI-6259 multiple input/output data acquisition(DAQ)board is used to acquire signals originally being sent to an analog display,and then convert the signals into a digital image.Two output channels are used for raster scan of the horizontal and verticle axes of the image buffer,while one input channel is used to read the brightness signals at various coordinate points.Synchronous method is used to maximize the DAQ speed.Finally,the digitally buffered images are read out to display and saved in a hard drive.The hardware and software designs of this work are explained in great detail,which can serve as a very good example for fast synchronous DAQ,advanced virtual instrument design and structural driver programming with LabVIEW.

Data synchronization in IMU/GPS integrated measurement system of vehicle motion parameters

To realize the data synchronization between the inertial measurement unit （IMU） and the global positioning system （GPS）, the synchronization technology in the IMU/GPS integrated measurement system of vehicle motion parameters is studied. According to the characteristics of the output signals of the IMU and the GPS, without the IMU synchronization signal, the synchronization circuit based on CPLD is designed and developed, which need not alter the configurations of the IMU and GPS. Experiments of measuring vehicle motion parameters, which rely on the synchronization circuit to realize IMU/GPS data synchronization, are made. The driving routes in experiments comprise a curve and a straight line. Experimental results show that the designed circuit can accurately measure the synchronization time difference and the IMU period, and can effectively solve the data synchronization in IMU/GPS integration. Furthermore, the IMU/GPS integrated measurement system based on the synchronization circuit can measure and calculate many vehicle motion parameters in high frequency mode.

Design of multi-channel data acquisition system based on LabVIEW and NI PXI-5105

A data acquisition system based on LabVIEW and NI PXI-5105 is presented for multi-channel data acquisition. It can realize the functions of parameter setting, data acquisition and storage, waveform display and data analysis using LabVIEW and NI-SCOPE device driver. The advantages of the system are that the setting is convenient, the operation is easy, the interface is friendly and the functions are practical. The experiment results show that the system has good stability and high reliability and is a powerful tool for multi-channel data acquisition.

SECURE DATA SYNCHRONIZATION EXCHANGE SERVICE APPLICATION PROGRAM INTERFACE BASED ON SyncML PROTOCOL

The security-related problem during the data exchange is not considered in the SyncML protocol. To solve this problem, SyncML is enhanced with a secure data synchronization exchange service application program interface （SDSXS-API） to ensure the reliability, the integrity, and the security in the data transmission and exchange. The design and the implementation of SDSXS-API are also given. The proposed APIs can be conveniently used as a uniform exchange interface for any related application programs. And their effectiveness is verified in the prototype mobile database system.

Design and Implementation of a High-Speed Multi-Channel Data Acquisition System

A data acquisition system （DAS） to implement high-speed, real-time and multi-channel data acquisition and store is presented. The control of the system is implemented by the combination of complex programable logic device （CPLD） and digital signal processing （DSP）, the bulk buffer of the system is implemented by the combination of CPLD, DSP, and synchronous dynamic random access memory （SDRAM）, and the data transfer is implemented by the combination of DSP, first in first out （FIFO）, universal serial bus （USB） and USB hub. The system could not only work independently in single-channel mode, but also implement high-speed real-time multi-channel data acquisition system （MCDAS） by the combination of multiple single-channels. The sampling rate and data storage capacity of each channel could reach up to 100 million sampiing per second and 256 MB respectively.

Multi-channel & high-precision data acquisition devi ce for aerospace

This paper describes the detailed desi gn of data acquisition device with multi-channel and high-precision for aerosp ace.Based on detailed analysis of the advantages and disadvantages of tw o common acquisition circuits,the design factors of acquisition device focus o n accuracy,sampling rate,hardware overhead and design space.The me chanical structure of the system is divided into different card layers according to different functions and the structure has the characteristics of high reliability,conveni ence to install and scalability.To ens ure reliable operation mode,the interface uses the optocoupler isolated from th e e xternal circuit.The transmission of signal is decided by the current in the cur rent loop that consists of optocouplers between acquisition device and t est bench.In multi-channel switching circuit,by establ ishing analog multiplexer model,the selection principles of circuit modes are given.

Exponential synchronization of chaotic Lur'e systems with time-varying delay via sampled-data control

In this paper, we study the exponential synchronization of chaotic Lur＇e systems with time-varying delays via sampled-data control by using sector nonlinearties. In order to make full use of information about sampling intervals and interval time-varying delays, new Lyapunov-Krasovskii functionals with triple integral terms are introduced. Based on the convex combination technique, two kinds of synchronization criteria are derived in terms of linear matrix inequal- ities, which can be efficiently solved via standard numerical software. Finally, three numerical examples are provided to demonstrate the less conservatism and effectiveness of the proposed results.

Designing of New Data Synchronization System

As the rapid development of Wireless Communications and the popularity of the Intelligent Terminal, data synchronization has been a social focus, meanwhile, user terminal devices are increasingly diversified, traditional synchronization technology based C/S mode has such deficiencies as insufficient amount of transmitting data and bad Real-time efficiency. It has become increasingly unable to meet the needs of future development. In this paper, we proposed and designed a new method and system by separating control with transmission to synchronize data to ensure Real-time data and improve efficiency.

Linear Network Coding Based Fast Data Synchronization for Wireless Ad Hoc Networks with Controlled Topology

Fast data synchronization in wireless ad hoc networks is a challenging and critical problem.It is fundamental for efficient information fusion,control and decision in distributed systems.Previously,distributed data synchronization was mainly studied in the latency-tolerant distributed databases,or assuming the general model of wireless ad hoc networks.In this paper,we propose a pair of linear network coding(NC)and all-to-all broadcast based fast data synchronization algorithms for wireless ad hoc networks whose topology is under operator’s control.We consider both data block selection and transmitting node selection for exploiting the benefits of NC.Instead of using the store-and-forward protocol as in the conventional uncoded approach,a compute-and-forward protocol is used in our scheme,which improves the transmission efficiency.The performance of the proposed algorithms is studied under different values of network size,network connection degree,and per-hop packet error rate.Simulation results demonstrate that our algorithms significantly reduce the times slots used for data synchronization compared with the baseline that does not use NC.

Exponential synchronization of complex dynamical networks with Markovian jumping parameters using sampled-data and mode-dependent probabilistic time-varying delays

In this paper, the problem of exponential synchronization of complex dynamical networks with Markovian jumping parameters using sampled-data and Mode-dependent probabilistic time-varying coupling delays is investigated. The sam- pling period is assumed to be time-varying and bounded. The information of probability distribution of the time-varying delay is considered and transformed into parameter matrices of the transferred complex dynamical network model. Based on the condition, the design method of the desired sampled data controller is proposed. By constructing a new Lyapunov functional with triple integral terms, delay-distribution-dependent exponential synchronization criteria are derived in the form of linear matrix inequalities. Finally, two numerical examples are given to illustrate the effectiveness of the proposed methods.

Sampled-data synchronization of coupled harmonic oscillators with controller failure and communication delays

In this letter, a distributed protocol for sampled-data synchronization of coupled harmonic oscillators with controller failure and communication delays is proposed, and a brief procedure of convergence analysis for such algorithm over undirected connected graphs is provided. Furthermore, a simple yet generic criterion is also presented to guarantee synchronized oscillatory motions in coupled harmonic oscillators. Subsequently, the simulation results are worked out to demonstrate the efficiency and feasibility of the theoretical results.

Stochastic asymptotical synchronization of chaotic Markovian jumping fuzzy cellular neural networks with mixed delays and the Wiener process based on sampled-data control

We investigate the stochastic asymptotical synchronization of chaotic Markovian jumping fuzzy cellular neural networks （MJFCNNs） with discrete, unbounded distributed delays, and the Wiener process based on sampled-data control using the linear matrix inequality （LMI） approach. The Lyapunov–Krasovskii functional combined with the input delay approach as well as the free-weighting matrix approach is employed to derive several sufficient criteria in terms of LMIs to ensure that the delayed MJFCNNs with the Wiener process is stochastic asymptotical synchronous. Restrictions （e.g., time derivative is smaller than one） are removed to obtain a proposed sampled-data controller. Finally, a numerical example is provided to demonstrate the reliability of the derived results.

Free-matrix-based time-dependent discontinuous Lyapunov functional for synchronization of delayed neural networks with sampled-data control

This paper is concerned with the synchronization of delayed neural networks via sampled-data control. A new technique, namely, the free-matrix-based time-dependent discontinuous Lyapunov functional approach, is adopted in constructing the Lyapunov functional, which takes advantage of the sampling characteristic of sawtooth input delay. Based on this discontinuous Lyapunov functional, some less conservative synchronization criteria are established to ensure that the slave system is synchronous with the master system. The desired sampled-data controller can be obtained through the use of the linear matrix inequality（LMI） technique. Finally, two numerical examples are provided to demonstrate the effectiveness and the improvements of the proposed methods.

Fault tolerant synchronization of chaotic systems based on T-S fuzzy model with fuzzy sampled-data controller

In this paper the fault tolerant synchronization of two chaotic systems based on fuzzy model and sample data is investigated. The problem of fault tolerant synchronization is formulated to study the global asymptotical stability of the error system with the fuzzy sampled-data controller which contains a state feedback controller and a fault compensator. The synchronization can be achieved no matter whether the fault occurs or not. To investigate the stability of the error system and facilitate the design of the fuzzy sampled-data controller, a Takagi Sugeno （T-S） fuzzy model is employed to represent the chaotic system dynamics. To acquire good performance and produce a less conservative analysis result, a new parameter-dependent Lyapunov-Krasovksii functional and a relaxed stabilization technique are considered. The stability conditions based on linear matrix inequality are obtained to achieve the fault tolerant synchronization of the chaotic systems. Finally, a numerical simulation is shown to verify the results.

Research and Application of Synchronization Update of Distributed Heterogeneous Database

According to the different equipment, different system and heterogeneous database have be information ＂isolated island＂ problem, and the data of equipments can be updated in real time on the business node. The paper proposes a program of data synchronization platform based on J2EE （JMS） and XML, and detailed analysis and description of the workflow system, its frame structure and the key technology. Practice shows that this scheme has the advantages of convenient and real-time etc..

Impulsive effect on exponential synchronization of neural networks with leakage delay under sampled-data feedback control

We consider the impulsive effect on the exponential synchronization of neural networks with leakage delay under the sampled-data feedback control. We use an appropriate Lyapunov-Krasovskii functional combined with the input delay approach and some inequality techniques to derive sufficient conditions that ensure the exponential synchronization of the delayed neural network. The conditions are formulated in terms of the leakage delay, the sampling period, and the exponential convergence rate. Numerical examples are given to demonstrate the usefulness and the effectiveness of the results.

Network-Wide Time Synchronization in Multi-Channel Wireless Sensor Networks

Recent advances in wireless sensor technology have enabled simultaneous exploitation of multiple channels in wireless sensor systems. In this paper, a novel time synchronization algorithm is proposed for multi- channel Wireless Sensor Networks (WSNs) called Multi-Channel Time Synchronization (MCTS) protocol. Time synchronization is critical for many WSN applications and enables efficient communications between sensor nodes along with intelligent spectrum access. Contrary to many existing protocols that do not exploit multi-channel communications, the protocol takes advantage of potential multiple channels and distributes the synchronization of different nodes to distinct channels and thus, reduces the convergence time of synchronization processes significantly.

Pinning sampled-data synchronization for complex networks with probabilistic coupling delay

We deal with the problem of pinning sampled-data synchronization for a complex network with probabilistic time-varying coupling delay. The sampling period considered here is assumed to be less than a given bound. Without using the Kronecker product, a new synchronization error system is constructed by using the property of the random variable and input delay approach. Based on the Lyapunov theory, a delay-dependent pinning sampled-data synchronization criterion is derived in terms of linear matrix inequalities （LMIs） that can be solved effectively by using MATLAB LMI toolbox. Numerical examples are provided to demonstrate the effectiveness of the proposed scheme.

基于面向TTE的新型数据综合系统的设计与实现

针对传统总线无法实时网络传输,新型总线时间触发以太网(TTE)兼容IP协议和IEEE802.3协议,但TT业务和BE业务需设备满足TTE协议,实际工程缺少适用性的问题,设计了一种基于FPGA的时间触发以太网数据综合系统。该数据综合系统以FPGA作为核心控制器,千兆网作为主要通信接口,在满足高速率、高宽带、高灵活的前提下,设计出数据综合模块,将多种传统总线与TTE总线良好兼容。试验结果表明:系统在同步精度高达40 ns、通信抖动仅为392 ns的前提下,数据转换收发无误码现象。同时将多种数据混合编帧,具备极高的稳定性与灵活性,为TTE网络数据服务于实际工程提供了可靠的解决方案。

基于数实结合的测控装备健康监测系统设计与实现

针对测控业务领域装备种类多、型号杂、布站分散、技术保障人力不足、远程技术协助手段落后等实际问题,结合测控装备自身特点和运维保障规律,提出了采用数字技术构建功能级数字测控装备,并利用数字装备和实体装备间物联网络使数实装备状态数据一致,实现基于数实结合的测控装备健康监测,实现装备状态数实同步,并可利用数实同步有效的评估装备状态、进行故障诊断和健康趋势预估,实现了运维保障数字化。