Poly （vinyl butyral） （PVB） hollow fiber membranes were fabricated via thermally induced phase separation （TIPS）. The effects of coagulation bath temperature （CBT） on the structure and performance of membranes ...Poly （vinyl butyral） （PVB） hollow fiber membranes were fabricated via thermally induced phase separation （TIPS）. The effects of coagulation bath temperature （CBT） on the structure and performance of membranes were investigated in detail. The morphologies of the membranes were studied by scanning electron microscopy （SEM）, the performances of water permeability, rejection, breaking strength and elongation were measured, respectively. The results indicate that all the membranes have the asymmetric morphology and the thickness of the skin layer decreases and the pore size of the outer layer increases with the increase of CBT. The permeability of membranes prepared at air gap 1.0 cm and take-up speed 0.253 m/s increases from 1.047×10-7 to 5.909×10-7 m3/（m2·s-kPa） with the CBT increasing from 20 ℃ to 40℃, and sharply increases to 35.226×10 7 m3/（m2.s.kPa）once the CBT arrives at 50 ℃. While the carbonic ink rejections have no significant decrease, totally exceed 98%, but that of acid-maleic acid copolymer greatly decreases with the increase of CBT. Both the breaking strength and elongation decrease with the increase of CBT.展开更多
Polyphenylsulfone(PPSU)ultrafiltration membrane with different structures was prepared by nonsolvent-induced phase separation.The effects of coagulation bath conditions(concentration and temperature)on membrane morpho...Polyphenylsulfone(PPSU)ultrafiltration membrane with different structures was prepared by nonsolvent-induced phase separation.The effects of coagulation bath conditions(concentration and temperature)on membrane morphology,pure water flux,pore size,porosity,and contact angle were studied and discussed based on ternary-phase diagrams.Results indicated that water had stronger coagulant power than ethanol,and that the morphology of the membrane prepared from the polyphenylsulfone/1-methyl-2-pyrrolidinone/H_(2)O(PPSU/NMP/H_(2)O)system had finger-like structures.Conversely,sponge-like structures were observed for the PPSU/NMP/(NMP-H_(2)O)and PPSU/NMP/(70 NMP-EtOH-H_(2)O)systems.Ethanol also greatly influenced on membrane structures.According to the Scanning electronic microscopy(SEM)image,the composition(mass fraction)of casting solution is 16%PPSU-84%NMP and the coagulation bath consisting of 70%NMP-26%H_(2)O-4%C_(2)H_(5)OH.Meanwhile,the PPSU ultrafiltration membrane with spong-like was prepared under 8℃coagulation bath.The formation of sponge-like structure reduces the pure water flux of ppsu membrane from 488.39 L·m^(-2)·h^(-1)to 36.04 L·m^(-2)·h^(-1).It also reduces the gas permeability,porosity,and pore size of the membrane.The addition of ethanol and NMP into the coagulation bath increases the roughness of the PPSU ultrafiltration membrane and reduces the hydrophilicity of the membrane.展开更多
The dual-bath coagulation method was used for the preparation of PES membrane in this experiment. The main intent of this stndy was to assess the efforts of gelation conditions on the structures and properties. The d...The dual-bath coagulation method was used for the preparation of PES membrane in this experiment. The main intent of this stndy was to assess the efforts of gelation conditions on the structures and properties. The dense top layer as well as porous supporting layer can be made by duel-bath coagulation method simultaneous- ly. Different internal quench medium obtained different membrane with different structures. With the increase in time in the first coagulation bath, pure water flux decreased and the clearance rates of urea and creatinine both first increased then decreased and increased slightly in the end. With the temperature of the second coagtdation bath increasing, pure water flux increases and the clearance rates of urea and creatinine first increases then de- creases and increases a little at last. Higher DMSO concentration （wt/wt） in the second coagulation bath results in the increase of pure water flux and the decrease of urea ＆ creatinine clearance rates.展开更多
The influences of the coagulation bath concentration in N-Methyl-Morpholine-N-oxide(NMMO)processon the maximum spinning speed and the mechanicalproperties(the modulus,the tenacity and the extensionat break)of Lyocell ...The influences of the coagulation bath concentration in N-Methyl-Morpholine-N-oxide(NMMO)processon the maximum spinning speed and the mechanicalproperties(the modulus,the tenacity and the extensionat break)of Lyocell flbers are investigated.The resultsshow that the maximum spinning speeds decrease withthe increasing coagulation bath concentration.When theconcentration of coagulation bath is 10％(wt％),the te-nacity and modulus of the obtained Lyocell fibers reachmaximum and the extension at break of the fibers reach-es minimum.展开更多
The coagulation bath system of carbon fiber precursor is a complicated and multivariable coupling system. Based on the model of industrial production,the full dynamic decoupling control of the coagulation bath system ...The coagulation bath system of carbon fiber precursor is a complicated and multivariable coupling system. Based on the model of industrial production,the full dynamic decoupling control of the coagulation bath system of carbon fiber precursor is achieved in combination with multivariable feed-forward-like decoupling and proportional-integral-differential( PID) control. Compared with the conventional PID decoupling control,the experiment results show that the proposed method has a better control effect. The use of the controller can achieve complete decoupling of three parameters from coagulation bath system. The method should have great applications.展开更多
基金Project(21176264)supported by the National Natural Science Foundation of ChinaProject(11JJ2010)supported by the Hunan Provincial Natural Science Foundation of China
文摘Poly （vinyl butyral） （PVB） hollow fiber membranes were fabricated via thermally induced phase separation （TIPS）. The effects of coagulation bath temperature （CBT） on the structure and performance of membranes were investigated in detail. The morphologies of the membranes were studied by scanning electron microscopy （SEM）, the performances of water permeability, rejection, breaking strength and elongation were measured, respectively. The results indicate that all the membranes have the asymmetric morphology and the thickness of the skin layer decreases and the pore size of the outer layer increases with the increase of CBT. The permeability of membranes prepared at air gap 1.0 cm and take-up speed 0.253 m/s increases from 1.047×10-7 to 5.909×10-7 m3/（m2·s-kPa） with the CBT increasing from 20 ℃ to 40℃, and sharply increases to 35.226×10 7 m3/（m2.s.kPa）once the CBT arrives at 50 ℃. While the carbonic ink rejections have no significant decrease, totally exceed 98%, but that of acid-maleic acid copolymer greatly decreases with the increase of CBT. Both the breaking strength and elongation decrease with the increase of CBT.
基金supported by National Natural Science Foundation of Tianjin(18JCZDJC37200)Tianjin University of Science&Technology Innovation Fund(2014CXLG11)+2 种基金Tianjin Key Laboratory of Marine Resources and Chemistry(201404)Yangtze Scholars and Innovative Research Team in University(IRT-17R81)Innovative Research Team of Tianjin Municipal Education Commission(TD13-5008)。
文摘Polyphenylsulfone(PPSU)ultrafiltration membrane with different structures was prepared by nonsolvent-induced phase separation.The effects of coagulation bath conditions(concentration and temperature)on membrane morphology,pure water flux,pore size,porosity,and contact angle were studied and discussed based on ternary-phase diagrams.Results indicated that water had stronger coagulant power than ethanol,and that the morphology of the membrane prepared from the polyphenylsulfone/1-methyl-2-pyrrolidinone/H_(2)O(PPSU/NMP/H_(2)O)system had finger-like structures.Conversely,sponge-like structures were observed for the PPSU/NMP/(NMP-H_(2)O)and PPSU/NMP/(70 NMP-EtOH-H_(2)O)systems.Ethanol also greatly influenced on membrane structures.According to the Scanning electronic microscopy(SEM)image,the composition(mass fraction)of casting solution is 16%PPSU-84%NMP and the coagulation bath consisting of 70%NMP-26%H_(2)O-4%C_(2)H_(5)OH.Meanwhile,the PPSU ultrafiltration membrane with spong-like was prepared under 8℃coagulation bath.The formation of sponge-like structure reduces the pure water flux of ppsu membrane from 488.39 L·m^(-2)·h^(-1)to 36.04 L·m^(-2)·h^(-1).It also reduces the gas permeability,porosity,and pore size of the membrane.The addition of ethanol and NMP into the coagulation bath increases the roughness of the PPSU ultrafiltration membrane and reduces the hydrophilicity of the membrane.
文摘The dual-bath coagulation method was used for the preparation of PES membrane in this experiment. The main intent of this stndy was to assess the efforts of gelation conditions on the structures and properties. The dense top layer as well as porous supporting layer can be made by duel-bath coagulation method simultaneous- ly. Different internal quench medium obtained different membrane with different structures. With the increase in time in the first coagulation bath, pure water flux decreased and the clearance rates of urea and creatinine both first increased then decreased and increased slightly in the end. With the temperature of the second coagtdation bath increasing, pure water flux increases and the clearance rates of urea and creatinine first increases then de- creases and increases a little at last. Higher DMSO concentration （wt/wt） in the second coagulation bath results in the increase of pure water flux and the decrease of urea ＆ creatinine clearance rates.
基金National Natural Science Foundation of China.(Ref: No.29874029)
文摘The influences of the coagulation bath concentration in N-Methyl-Morpholine-N-oxide(NMMO)processon the maximum spinning speed and the mechanicalproperties(the modulus,the tenacity and the extensionat break)of Lyocell flbers are investigated.The resultsshow that the maximum spinning speeds decrease withthe increasing coagulation bath concentration.When theconcentration of coagulation bath is 10％(wt％),the te-nacity and modulus of the obtained Lyocell fibers reachmaximum and the extension at break of the fibers reach-es minimum.
基金the Key Project of the National Nature Science Foundation of China(No.61134009)Program for Changjiang Scholars and Innovation Research Team in University from the Ministry of Education,China(No.IRT1220)+1 种基金Specialized Research Fund for Shanghai Leading Talents,Project of the Shanghai Committee of Science and Technology,China(No.13JC1407500)the Fundamental Research Funds for the Central Universities,China(No.2232012A3-04)
文摘The coagulation bath system of carbon fiber precursor is a complicated and multivariable coupling system. Based on the model of industrial production,the full dynamic decoupling control of the coagulation bath system of carbon fiber precursor is achieved in combination with multivariable feed-forward-like decoupling and proportional-integral-differential( PID) control. Compared with the conventional PID decoupling control,the experiment results show that the proposed method has a better control effect. The use of the controller can achieve complete decoupling of three parameters from coagulation bath system. The method should have great applications.
