Energy Recovery Threshold Logic and Power Clock Generation Circuits

Energy recovery threshold logic (ERTL) is proposed,which combines threshold logic with adiabatic approach.ERTL achieves low energy as well as low gate complexity.A high efficiency power clock generator is also proposed,which can adjust duty cycle of MOS switch in power clock generator depending on logic complexity and operating frequency to achieve optimum energy efficiency.Closed-form results are derived,which facilitate efficiency-optimized design of the power clock generator.An ERTL PLA and a conventional PLA are designed and simulated on 0.35μm process.The energy efficiency of the proposed power clock generator can reach 77%～85% operating between 20～100MHz.Simulation results indicate that ERTL is a low energy logic.Including power loss of power clock circuits,ERTL PLA still shows 65%～77% power savings compared to conventional PLA.

A review on the design of ternary logic circuits

A multi-valued logic system is a promising alternative to traditional binary logic because it can reduce the complexity,power consumption, and area of circuit implementation. This article briefly summarizes the development of ternary logic and its advantages in digital logic circuits. The schemes, characteristics, and application of ternary logic circuits based on CMOS, CNTFET, memristor, and other devices and processes are reviewed in this paper, providing some reference for the further research and development of ternary logic circuits.

DESIGN OF TWO-PHASE SINUSOIDAL POWER CLOCK AND CLOCKED TRANSMISSION GATE ADIABATIC LOGIC CIRCUIT

First the research is conducted on the design of the two-phase sinusoidal power clock generator in this paper. Then the design of the new adiabatic logic circuit adopting the two-phase sinusoidal power clocks--Clocked Transmission Gate Adiabatic Logic （CTGAL） circuit is presented. This circuit makes use of the clocked transmission gates to sample the input signals, then the output loads are charged and discharged in a fully adiabatic manner by using bootstrapped N-Channel Metal Oxide Semiconductor （NMOS） and Complementary Metal Oxide Semiconductor （CMOS） latch structure. Finally, with the parameters of Taiwan Semiconductor Manufacturing Company （TSMC） 0.25um CMOS device, the transient energy consumption of CTGAL, Bootstrap Charge-Recovery Logic （BCRL） and Pass-transistor Adiabatic Logic （PAL） including their clock generators is simulated. The simulation result indicates that CTGAL circuit has the characteristic of remarkably low energy consumption.

A Comparative Study of Majority/Minority Logic Circuit Synthesis Methods for Post-CMOS Nanotechnologies

The physical limitations of complementary metal-oxide semiconductor?(CMOS) technology have led many researchers to consider other alternative technologies. Quantum-dot cellular automate (QCA), single electron tunneling (SET), tunneling phase logic (TPL), spintronic devices, etc., are some of the nanotechnologies that are being considered as possible replacements for CMOS. In these nanotechnologies, the basic logic units used to implement circuits are majority and/or minority gates. Several majority/minority logic circuit synthesis methods have been proposed. In this paper, we give a comparative study of the existing majority/minority logic circuit synthesis methods that are capable of synthesizing multi-input multi-output Boolean functions. Each of these methods is discussed in detail. The optimization priorities given to different factors such as gates, levels, inverters, etc., vary with technologies. Based on these optimization factors, the results obtained from different synthesis methods are compared. The paper also analyzes the optimization capabilities of different methods and discusses directions for future research in the synthesis of majority/minority logic networks.

FAULT DETECTION FOR MULTIPLE-VALUED LOGIC CIRCUITS WITH FANOUT-FREE

The single fault and multiple fault detections for multiple-valued logic circuits are studied in this paper. Firstly, it is shown that the cardinality of optimal single fault test set for fanout-free m-valued circuits with n primary inputs is not more than n + 1, for linear tree circuits is two, and for multiplication modulo circuits is two if n is an odd number or if n is an even number and m ＞ 3, where the optimal test set of a circuit has minimal number of test vectors. Secondly,it is indicated that the cardinality of optimal multiple fault test set for linear tree circuits with n primary inputs is 1 + [n/(m - 1)], for multiplication modulo circuits is n+ 1, for fanout-free circuits that consist of 2-input linear tree circuits and 2-input multiplication modulo circuits is not greater than n+ 1, where [x] denotes the smallest integer greater than or equal to x. Finally,the single fault location approaches of linear tree circuits and multiplication modulo circuits are presented, and all faults in the two types of circuits can be located by using a test set with n + 1 vectors.

Systolic B-1 Circuit in Galois Fields Based on a Quaternary Logic Technique

In order to improve the circuit complexity and reduce the long latency of B-1 operations,a novel B-1 operation in Galois Field GF(24)is presented and the corresponding systolic realization based on multiple-valued logic(MVL)is proposed.The systolic structure employs multiplevalued current mode(MVCM)by using dynamic source-coupled logic(SCL)to reduce the initial delay and the transistor and wire counts.The performance is evaluated by HSPICE simulation in 0.18μm CMOS technology and a comparison is conducted between our proposed implementation and those reported in the literature.The initial delay and the sum of transistors and wires in our MVL design are about 43%and 13%lower,respectively,in comparison with other corresponding binary CMOS implementations.The systolic architecture proposed is simple,regular,and modular,well suited for very large scale integration(VLSI)implementations.The combination of MVCM circuits and relevant algorithms based on MVL seems to be a potential solution for high performance arithmetic operations in GF(2k).

A novel circuit design for complementary resistive switch-based stateful logic operations

Recently, it has been demonstrated that memristors can be utilized as logic operations and memory elements. In this paper, we present a novel circuit design for complementary resistive switch（CRS）-based stateful logic operations. The proposed circuit can automatically write the destructive CRS cells back to the original states. In addition, the circuit can be used in massive passive crossbar arrays which can reduce sneak path current greatly. Moreover, the steps for CRS logic operations using our proposed circuit are reduced compared with previous circuit designs. We validate the effectiveness of our scheme through Hspice simulations on the logic circuits.

A Novel High-Performance Lekage-Tolerant, Wide Fan-In Domino Logic Circuit in Deep-Submicron Technology

As technology shrinks in modern era the demand on high speed, low power consumption and small chip area in microprocessors is come into existence. In this paper we have presented a new class of domino circuit design for low power consumption, faster circuit speed and high performance. Due to wide fan-in domino logic, its logic gate suffer from noise sensitivity, if we improve sensitivity, sub-threshold and gate oxide leakage current dominate in evaluation network, which increases the power consumption and reduces the performance of the circuit. The proposed circuit improves the dynamic power consumption and reduces the delay which improves the speed of the circuit. Simulation is performed in BISM4 Cadence environment at 65 nm process technology, with supply voltage 1 V at 100 MHz frequency and bottleneck operating temperature of 27°C with CL = 1 fF. From the result average power improvement by proposed circuit 1 & 2 for 8 input OR gate is 10.1%, 15.28% SFLD, 48.56%, 51.49% CKD, 55.17%, 57.71% HSD and improvement of delay is 1.10%, 12.76% SFLD, 19.13%, 28.63% CKD, 4.32%, 15.59% HSD, 19.138%, 44.25% DFD respectively.

A weighted averaging method for signal probability of logic circuit combined with reconvergent fan-out structures

By analyzing the structures of circuits,a novel approach for signal probability estimation of very large-scale integration(VLSI)based on the improved weighted averaging algorithm(IWAA)is proposed.Considering the failure probability of the gate,first,the first reconvergent fan-ins corresponding to the reconvergent fan-outs were identified to locate the important signal correlation nodes based on the principle of homologous signal convergence.Secondly,the reconvergent fan-in nodes of the multiple reconverging structure in the circuit were identified by the sensitization path to determine the interference sources to the signal probability calculation.Then,the weighted signal probability was calculated by combining the weighted average approach to correct the signal probability.Finally,the reconvergent fan-out was quantified by the mixed-calculation strategy of signal probability to reduce the impact of multiple reconvergent fan-outs on the accuracy.Simulation results on ISCAS85 benchmarks circuits show that the proposed method has approximate linear time-space consumption with the increase in the number of the gate,and its accuracy is 4.2%higher than that of the IWAA.

Logic Picture-Based Dynamic Power Estimation for Unit Gate-Delay Model CMOS Circuits

In this research, a fast methodology to calculate the exact value of the average dynamic power consumption for CMOS combinational logic circuits is developed. The delay model used is the unit-delay model where all gates have the same propagation delay. The main advantages of this method over other techniques are its accuracy, as it is deterministic and it requires less computational effort compared to exhaustive simulation approaches. The methodology uses the Logic Pictures concept for obtaining the nodes’ toggle rates. The proposed method is applied to well-known circuits and the results are compared to exhaustive simulation and Monte Carlosimulation methods.

Leakage Reduction Using DTSCL and Current Mirror SCL Logic Structures for LP-LV Circuits

This paper presents a novel approach to design robust Source Coupled Logic (SCL) for implementing ultra low power circuits. In this paper, we propose two different source coupled logic structures and analyze the performance of these structures with STSCL (Sub-threshold SCL). The first design under consideration is DTPMOS as load device which analyses the performance of Dynamic Threshold SCL (DTSCL) Logic with previous source coupled logic for ultra low power operation. DTSCL circuits exhibit a better power-delay Performance compared with the STSCL Logic. It can be seen that the proposed circuit provides 56% reduction in power delay product. The second design under consideration uses basic current mirror active load device to provide required voltage swing. Current mirror source coupled logic (CMSCL) can be used for high speed operation. The advantage of this design is that it provides 54% reduction in power delay product over conventional STSCL. The main drawback of this design is that it provides a higher power dissipation compared to other source coupled logic structures. The proposed circuit provides lower sensitivity to temperature and power supply variation, with a superior control over power dissipation. Measurements of test structures simulated in 0.18 μm CMOS technology shows that the proposed DTSCL logic concept can be utilized successfully for bias currents as low as 1 pA. Measurements show that existing standard cell libraries offer a good solution for ultra low power SCL circuits. Cadence Virtuoso schematic editor and Spectre Simulation tools have been used.

CircuitVerse:A Simulator for Teaching and Learning of Digital Logic Circuit

Digital Logic is a fundamental course of majors in electronic information.The simulation experiment is an essential measure to help students understand the principles of digital logic.It can improve the efficiency of physical experiments and decrease instrument damage caused by operating errors.CircuitVerse is an open-source and Web-based tool of circuit design and simulation for teaching purposes.And now,teachers and students in many colleges and universities use it to assist teaching and learning.Firstly,through a particular example,the features of CircuitVerse and its usage are explained.Secondly,we briefly introduce the application of CircuitVerse in our teaching as well as the following development plans.We believe that our introduction can help teachers understand the software and how to make full use of this tool.

Two Analytical Methods for Detection and Elimination of the Static Hazard in Combinational Logic Circuits

In this paper, the authors continue the researches described in [1], that consists in a comparative study of two methods to eliminate the static hazard from logical functions, by using the form of Product of Sums (POS), static hazard “0”. In the first method, it used the consensus theorem to determine the cover term that is equal with the product of the two residual implicants, and in the second method it resolved a Boolean equation system. The authors observed that in the second method the digital hazard can be earlier detected. If the Boolean equation system is incompatible (doesn’t have solutions), the considered logical function doesn’t have the static 1 hazard regarding the coupled variable. Using the logical computations, this method permits to determine the needed transitions to eliminate the digital hazard.

RF-TSV DESIGN, MODELING AND APPLICATION FOR 3D MULTI-CORE COMPUTER SYSTEMS

The state-of-the-art multi-core computer systems are based on Very Large Scale three Dimensional (3D) Integrated circuits (VLSI). In order to provide high-speed vertical data transmission in such 3D systems, efficient Through-Silicon Via (TSV) technology is critically important. In this paper, various Radio Frequency (RF) TSV designs and models are proposed. Specifically, the Cu-plug TSV with surrounding ground TSVs is used as the baseline structure. For further improvement, the dielectric coaxial and novel air-gap coaxial TSVs are introduced. Using the empirical parameters of these coaxial TSVs, the simulation results are obtained demonstrating that these coaxial RF-TSVs can provide two-order higher of cut-off frequencies than the Cu-plug TSVs. Based on these new RF-TSV technologies, we propose a novel 3D multi-core computer system as well as new architectures for manipulating the interfaces between RF and baseband circuit. Taking into consideration the scaling down of IC manufacture technologies, predictions for the performance of future generations of circuits are made. With simulation results indicating energy per bit and area per bit being reduced by 7% and 11% respectively, we can conclude that the proposed method is a worthwhile guideline for the design of future multi-core computer ICs.

Design of Multi-Valued Logic Circuit Using Carbon Nano Tube Field Transistors

The design of a three-input logic circuit using carbon nanotube field effect transistors(CNTFETs)is presented.Ternary logic must be an exact replacement for dual logic since it performs straightforwardly in digital devices,which is why this design is so popular,and it also reduces chip area,both of which are examples of circuit overheads.The proposed module we have investigated is a triple-logic-based one,based on advanced technology CNTFETs and an emphasis on minimizing delay times at various values,as well as comparisons of the design working with various load capacitances.Comparing the proposed design with the existing design,the delay times was reduced from 66.32 to 16.41 ps,i.e.,a 75.26%reduction.However,the power dissipation was not optimized,and increased by 1.44%compared to the existing adder.The number of transistors was also reduced,and the product of power and delay(P∗D)achieved a value of 0.0498053 fJ.An improvement at 1 V was also achieved.A load capacitance(fF)was measured at different values,and the average delay measured for different values of capacitance had a maximum of 83.60 ps and a minimum of 22.54 ps,with a range of 61.06 ps.The power dissipations ranged from a minimum of 3.38μW to a maximum of 6.49μW.Based on these results,the use of this CNTFET half-adder design in multiple Boolean circuits will be a useful addition to circuit design.

基于相关性分离的逻辑电路敏感门定位算法

随着CMOS器件特征尺寸进入纳米量级,因高能粒子辐射等造成的电路失效问题日益严重,给电路可靠性带来严峻挑战。现阶段,准确评估集成电路可靠性,并以此为依据对电路进行容错加固,以提高电路系统可靠性变得刻不容缓。然而,由于逻辑电路中存在大量扇出重汇聚结构,由此引发的信号相关性导致可靠性评估与敏感单元定位面临困难。该文提出一种基于相关性分离的逻辑电路敏感门定位算法。先将电路划分为多个独立电路结构(ICS);以ICS为基本单元分析故障传播及信号相关性影响;再利用相关性分离后的电路模块和反向搜索算法精准定位逻辑电路敏感门单元;最后综合考虑面向输入向量空间的敏感门定位及针对性容错加固。实验结果表明,所提算法能准确、高效地定位逻辑电路敏感单元,适用于大规模及超大规模电路的可靠性评估与高效容错设计。

基于多端忆阻器的组合逻辑电路设计

微型忆阻器为大脑神经网络的发展提供了新的机遇,简单而精确的忆阻器可以提高各种神经网络和运算电路的性能。以传统二端忆阻模型为基础,通过引入控制端口,设计了一种多端忆阻器,使忆阻器在电路设计和应用中更加灵活实用。鉴于多端忆阻器的电阻由金属区、低电阻区和高电阻区三部分组成,采用三段分片线性法来分别拟合这三个区域。通过推导忆阻器的公式和工作原理,建立了该忆阻器的模型,并对所构建的电路进行了磁滞曲线与逻辑电路测试。仿真结果表明:构建的多端忆阻器能够产生符合忆阻特性的滞回曲线,并且实现了组合逻辑电路功能。由于搭建的忆阻器电路仅由MOS管构成,与传统忆阻逻辑电路相比,所使用的元件数量降低了63.9%。

基于适应性循环理论的集成电路产业集群韧性:演化逻辑与提升路径

培育具备强大韧性的集群生态圈是推动集成电路产业集群高质量发展的关键问题。将产业集群视为一个动态系统,从理论上探讨集群韧性的演化逻辑和提升路径。在适应性循环理论视角下,韧性系统具备随情境而动态平衡的稳定性与复杂性,以及内部主体的弱网络关联性。突发事件冲击下,产业集群在“冲击吸收-冲击适应-恢复更新-再组织”四阶段具有复杂韧性演化逻辑。当前,集成电路产业集群面临人才紧缺、技术封锁、超长链条、产业体系依赖等困境,应遵循阶段演化的复杂逻辑,以培育自主可控的产业韧性系统为目标导向,塑造“抵抗-适应-恢复-再组织”的韧性能力,以实现集群韧性水平的螺旋式上升。

模拟乒乓球运动的逻辑电路设计

阐述在数字逻辑电路实验教学中引入游戏电路设计。以模拟乒乓球游戏电路的设计为例,该游戏电路综合运用计数器、移位寄存器、锁存器等逻辑器件,利用按键模拟两位选手的乒乓球拍,利用发光二极管模拟乒乓球及其运动路径,A端与B端相互击球,数码管显示选手的当前得分,游戏难度可通过改变时钟电路的频率进行调节。

基于XMG的乘法器电路等价性验证算法

组合电路等价性验证是数字集成电路设计自动化(EDA)中的重要部分,随着算术电路在现代计算机系统中的占比逐渐增大,传统的等价性验证算法在验证多比特算术电路,尤其是乘法器电路时面临挑战.对此,提出一种基于XOR-Majority Graph(XMG)逻辑表示的组合电路等价性验证算法.首先将2个待验证电路构建成的联接(Miter)电路进行XMG逻辑重写;然后在等价性一致的前提下对XMG的节点个数和逻辑深度进行逻辑重写优化;最后调用布尔可满足性(SAT)求解器和仿真器进行验证,得到最终等价性验证结果.实验结果表明,与ABC,Lingeling等工具相比,所提算法在验证时间上实现了平均489倍、最高1472倍的加速.