China has large population and wide territory, the natural conditions of different regions are complicated. water resources are distributed unbalanced.economic developing states are unequal. For these reasons the vari...China has large population and wide territory, the natural conditions of different regions are complicated. water resources are distributed unbalanced.economic developing states are unequal. For these reasons the variation of concerned water environment capacity has obvious character of regional differentiation. In this paper, from the economic development point of view, the regular pattern of regional differentiation of China's water environment capacity resources is analyzed. the concept of contradictory degree between water environment capacity and economic development is introduced, based on them, rivers in China are divided into three regions, and corresponding strategies to control water pollution are advanced. The aims are to use river water environment capacity resources effectively. to control pollution and to improve environmental quality.展开更多
Single-crystal Ni-rich cathodes are a promising candidate for high-energy lithium-ion batteries due to their higher structural and cycling stability than polycrystalline materials.However,the phase evolution and capac...Single-crystal Ni-rich cathodes are a promising candidate for high-energy lithium-ion batteries due to their higher structural and cycling stability than polycrystalline materials.However,the phase evolution and capacity degradation of these single-crystal cathodes during continuous lithation/delithation cycling remains unclear.Understanding the mapping relationship between the macroscopic electrochemical properties and the material physicochemical properties is crucial.Here,we investigate the correlation between the physical-chemical characteristics,phase transition,and capacity decay using capacity differential curve feature identification and in-situ X-ray spectroscopic imaging.We systematically clarify the dominant mechanism of phase evolution in aging cycling.Appropriately high cut-off voltages can mitigate the slow kinetic and electrochemical properties of single-crystal cathodes.We also find that second-order differential capacity discharge characteristic curves can be used to identify the crystal structure disorder of Ni-rich cathodes.These findings constitute a step forward in elucidating the correlation between the electrochemical extrinsic properties and the physicochemical intrinsic properties and provide new perspectives for failure analysis of layered electrode materials.展开更多
Sector capacity estimation plays an important role in applied research of airspace management.Previous researches manifest that sector capacity should be influenced by its standard flow,or routes in that sector.Howeve...Sector capacity estimation plays an important role in applied research of airspace management.Previous researches manifest that sector capacity should be influenced by its standard flow,or routes in that sector.However,if air traffic controller(ATCO)workload busy levels(level of proactivity of an ATCO)are ignored,the estimated sector capacity may not be accurate.There is a need to compare the estimated sector capacity with and without busy levels consideration,both with differentiated routes consideration.This paper proposes a method for sector capacity estimation based on ATCO workload considering differentiated routes and busy levels.Firstly,the main routes in the sector are identified,and for each route,the ATCO workload per flight is determined.Secondly,the workload for each route at three busy levels is determined.Regression analysis is then applied to determine the relationship between workload and the number of flights(with and without considering busy levels)in 15 min and 1h time slices.Sector capacity is then determined on the basis of a specified workload threshold,for the two cases with and without considering busy levels.Comparing the two scenarios and following validation by ATCO survey,it is found that capacity estimation considering busy levels is a more realistic and accurate approach.The validated capacity values for the Zhengzhou approach(ZHCC AP)airspace sector accounting for the busy levels were determined accurately as 10 and 33 flights for the 15 min and 1h slices,respectively.The corresponding results without considering busy levels were 12 and 41 flights for the 15 min and 1h time slices,respectively.展开更多
The weighted Sobolev-Lions type spaces W pl,γ（Ω; E0, E） = W pl,γ（Ω; E） ∩ Lp,γ （Ω; E0） are studied, where E0, E are two Banach spaces and E0 is continuously and densely embedded on E. A new concept of capa...The weighted Sobolev-Lions type spaces W pl,γ（Ω; E0, E） = W pl,γ（Ω; E） ∩ Lp,γ （Ω; E0） are studied, where E0, E are two Banach spaces and E0 is continuously and densely embedded on E. A new concept of capacity of region Ω ∈ Rn in W pl,γ（; E0, E） is introduced. Several conditions in terms of capacity of region Ω and interpolations of E0 and E are found such that ensure the continuity and compactness of embedding operators. In particular, the most regular class of interpolation spaces Eα between E0 and E, depending of α and l, are found such that mixed differential operators Dα are bounded and compact from W pl,γ（Ω; E0, E） to Eα-valued Lp,γ spaces. In applications, the maximal regularity for differential-operator equations with parameters are studied.展开更多
Nanocomposites were fabricated by using a commercial two part epoxy as a matrix and multiwalled carbon nanotubes, graphite fibers and boron nitride platelets as filler materials. Multiwalled carbon nanotubes (MWCNTs) ...Nanocomposites were fabricated by using a commercial two part epoxy as a matrix and multiwalled carbon nanotubes, graphite fibers and boron nitride platelets as filler materials. Multiwalled carbon nanotubes (MWCNTs) that were produced by chemical vapor deposition were found to produce nanocomposites with better thermal diffusivity and thermal conductivity than the MWCNTs that were produced by the combustion method. Compared to the MWCNTs produced by both methods and graphite fibers, boron nitride produced nanocomposites with the highest thermal conductivity. Specific heat capacity was measured by using differential scanning calorimetry and thermal diffusivity was measured by using the laser flash.展开更多
Analyzing the effects of heat rejection from condensers of split-type air-conditioning units at lower-floors of MLABs （multi-level apartment buildings）, using field measurements to monitor environmental conditions a...Analyzing the effects of heat rejection from condensers of split-type air-conditioning units at lower-floors of MLABs （multi-level apartment buildings）, using field measurements to monitor environmental conditions and condenser operation, revealed increases in the inlet air temperature at the condensers at the upper floors, which in turn increased the power and energy requirements for these units and decreased their cooling capacities. Results indicated that a decrease of up to 16,000 tons in cooling capacity and an increase of up to 67.2 MW in the national peak load demand might be reached for a 4 ℃ temperature differential for Kuwait conditions. It is recommended that the condensers be placed in the wind pathway to minimize the impact of heat rejection and stack effect and to optimize the operation of split-type air-conditioning units, and that other factors regarding installation setup and location are investigated.展开更多
In this study,the mechanical properties and damping capacities of cast Mg-5.5 Zn-0.6 Zr(weight percent,ZK60)alloys have been simultaneously improved by a facile multi-directional forging(MDF)processing,and the mechani...In this study,the mechanical properties and damping capacities of cast Mg-5.5 Zn-0.6 Zr(weight percent,ZK60)alloys have been simultaneously improved by a facile multi-directional forging(MDF)processing,and the mechanisms of microstructure evolution and texture modification are systematically investigated.The activation of tension twinning occurs during the initial MDF stage,due to the coarse-grained structure of the as-cast alloy.With increasing MDF passes,the continuous dynamic recrystallization(CDRX)results in a fine equiaxed-grain structure.The typical non-basal texture is formed in the as-MDFed alloy for 6 passes,with the(0001)planes inclined 60°–70°to forged direction and 10°–20°to transverse direction,respectively.A good balance between the strength(~194.9 MPa)and ductility(~24.9%)has been achieved,which can be ascribed to the grain refinement,non-basal texture and fine precipitate particles.The damping capacity is remarkably improved after MDF processing,because the severe deformation increases the dislocation density,which effectively enlarges the sweep areas of mobile dislocations.展开更多
Based on the analysis of the deformation styles in different tectonic belts of the MiddleUpper Yangtze region,as well as the dissection of typical hydrocarbon reservoirs,this study determined the controlling effects o...Based on the analysis of the deformation styles in different tectonic belts of the MiddleUpper Yangtze region,as well as the dissection of typical hydrocarbon reservoirs,this study determined the controlling effects of deformations on the hydrocarbon accumulations,obtaining the following results.The Middle-Upper Yangtze region experienced significant deformations during the Late Indosinian(T_(2)–T_(3)),the Middle Yanshanian(J_(3)–K_(1)),and the Himalayan,and five styles of tectonic deformations mainly occurred,namely superimposed deep burial,uplift,compressional thrusting,multi-layer decollement,and secondary deep burial.The distribution of hydrocarbon reservoirs in the piedmont thrust belts is controlled by the concealed structures on the footwall of the deep nappe.The gentle deformation area in central Sichuan experienced differential uplift,structural-lithologic hydrocarbon reservoirs were formed over a wide area.The eastern Sichuan-western Hunan and Hubei deformation area experienced Jura Mountains-type multi-layer detachment,compressional thrusting,and uplift.In relatively weakly folded and uplifted areas,conventional structural-lithologic hydrocarbon reservoirs have undergone adjustment and re-accumulation,and the shale gas resources are well preserved.In the strongly deformed areas,conventional hydrocarbon reservoirs were destroyed,while unconventional hydrocarbon reservoirs have been partially preserved.The marine strata in the Jianghan Basin experienced compression,thrusting,and denudation in the early stage and secondary deep burial in the late stage.Consequently,the unconventional gas resources have been partially preserved in these strata.Secondary hydrocarbon generation become favorable for conventional hydrocarbon accumulations in the marine strata.展开更多
文摘China has large population and wide territory, the natural conditions of different regions are complicated. water resources are distributed unbalanced.economic developing states are unequal. For these reasons the variation of concerned water environment capacity has obvious character of regional differentiation. In this paper, from the economic development point of view, the regular pattern of regional differentiation of China's water environment capacity resources is analyzed. the concept of contradictory degree between water environment capacity and economic development is introduced, based on them, rivers in China are divided into three regions, and corresponding strategies to control water pollution are advanced. The aims are to use river water environment capacity resources effectively. to control pollution and to improve environmental quality.
文摘Single-crystal Ni-rich cathodes are a promising candidate for high-energy lithium-ion batteries due to their higher structural and cycling stability than polycrystalline materials.However,the phase evolution and capacity degradation of these single-crystal cathodes during continuous lithation/delithation cycling remains unclear.Understanding the mapping relationship between the macroscopic electrochemical properties and the material physicochemical properties is crucial.Here,we investigate the correlation between the physical-chemical characteristics,phase transition,and capacity decay using capacity differential curve feature identification and in-situ X-ray spectroscopic imaging.We systematically clarify the dominant mechanism of phase evolution in aging cycling.Appropriately high cut-off voltages can mitigate the slow kinetic and electrochemical properties of single-crystal cathodes.We also find that second-order differential capacity discharge characteristic curves can be used to identify the crystal structure disorder of Ni-rich cathodes.These findings constitute a step forward in elucidating the correlation between the electrochemical extrinsic properties and the physicochemical intrinsic properties and provide new perspectives for failure analysis of layered electrode materials.
基金partially supported by the National Natural Science Foundation of China(No.61304190)the Fundamental Research Funds for the Central Universities(No.NJ20140018)
文摘Sector capacity estimation plays an important role in applied research of airspace management.Previous researches manifest that sector capacity should be influenced by its standard flow,or routes in that sector.However,if air traffic controller(ATCO)workload busy levels(level of proactivity of an ATCO)are ignored,the estimated sector capacity may not be accurate.There is a need to compare the estimated sector capacity with and without busy levels consideration,both with differentiated routes consideration.This paper proposes a method for sector capacity estimation based on ATCO workload considering differentiated routes and busy levels.Firstly,the main routes in the sector are identified,and for each route,the ATCO workload per flight is determined.Secondly,the workload for each route at three busy levels is determined.Regression analysis is then applied to determine the relationship between workload and the number of flights(with and without considering busy levels)in 15 min and 1h time slices.Sector capacity is then determined on the basis of a specified workload threshold,for the two cases with and without considering busy levels.Comparing the two scenarios and following validation by ATCO survey,it is found that capacity estimation considering busy levels is a more realistic and accurate approach.The validated capacity values for the Zhengzhou approach(ZHCC AP)airspace sector accounting for the busy levels were determined accurately as 10 and 33 flights for the 15 min and 1h slices,respectively.The corresponding results without considering busy levels were 12 and 41 flights for the 15 min and 1h time slices,respectively.
文摘The weighted Sobolev-Lions type spaces W pl,γ（Ω; E0, E） = W pl,γ（Ω; E） ∩ Lp,γ （Ω; E0） are studied, where E0, E are two Banach spaces and E0 is continuously and densely embedded on E. A new concept of capacity of region Ω ∈ Rn in W pl,γ（; E0, E） is introduced. Several conditions in terms of capacity of region Ω and interpolations of E0 and E are found such that ensure the continuity and compactness of embedding operators. In particular, the most regular class of interpolation spaces Eα between E0 and E, depending of α and l, are found such that mixed differential operators Dα are bounded and compact from W pl,γ（Ω; E0, E） to Eα-valued Lp,γ spaces. In applications, the maximal regularity for differential-operator equations with parameters are studied.
文摘Nanocomposites were fabricated by using a commercial two part epoxy as a matrix and multiwalled carbon nanotubes, graphite fibers and boron nitride platelets as filler materials. Multiwalled carbon nanotubes (MWCNTs) that were produced by chemical vapor deposition were found to produce nanocomposites with better thermal diffusivity and thermal conductivity than the MWCNTs that were produced by the combustion method. Compared to the MWCNTs produced by both methods and graphite fibers, boron nitride produced nanocomposites with the highest thermal conductivity. Specific heat capacity was measured by using differential scanning calorimetry and thermal diffusivity was measured by using the laser flash.
文摘Analyzing the effects of heat rejection from condensers of split-type air-conditioning units at lower-floors of MLABs （multi-level apartment buildings）, using field measurements to monitor environmental conditions and condenser operation, revealed increases in the inlet air temperature at the condensers at the upper floors, which in turn increased the power and energy requirements for these units and decreased their cooling capacities. Results indicated that a decrease of up to 16,000 tons in cooling capacity and an increase of up to 67.2 MW in the national peak load demand might be reached for a 4 ℃ temperature differential for Kuwait conditions. It is recommended that the condensers be placed in the wind pathway to minimize the impact of heat rejection and stack effect and to optimize the operation of split-type air-conditioning units, and that other factors regarding installation setup and location are investigated.
基金financially supported by the National Natural Science Foundation of China(No.51771178)the Shanxi Provincial Key Research and Development Project(Nos.2020KWZ-007,2018ZDXM-GY-149)the Natural Science Foundation of Jilin Province(No.20180414016GH)。
文摘In this study,the mechanical properties and damping capacities of cast Mg-5.5 Zn-0.6 Zr(weight percent,ZK60)alloys have been simultaneously improved by a facile multi-directional forging(MDF)processing,and the mechanisms of microstructure evolution and texture modification are systematically investigated.The activation of tension twinning occurs during the initial MDF stage,due to the coarse-grained structure of the as-cast alloy.With increasing MDF passes,the continuous dynamic recrystallization(CDRX)results in a fine equiaxed-grain structure.The typical non-basal texture is formed in the as-MDFed alloy for 6 passes,with the(0001)planes inclined 60°–70°to forged direction and 10°–20°to transverse direction,respectively.A good balance between the strength(~194.9 MPa)and ductility(~24.9%)has been achieved,which can be ascribed to the grain refinement,non-basal texture and fine precipitate particles.The damping capacity is remarkably improved after MDF processing,because the severe deformation increases the dislocation density,which effectively enlarges the sweep areas of mobile dislocations.
基金jointly funded by the National Natural Science Foundation(Nos.U19B6003,U20B6001,9175520021,42002137)Chinese Academy of Sciences(CAS)Strategic Leading Science&Technology Program(No.XDA14000000)。
文摘Based on the analysis of the deformation styles in different tectonic belts of the MiddleUpper Yangtze region,as well as the dissection of typical hydrocarbon reservoirs,this study determined the controlling effects of deformations on the hydrocarbon accumulations,obtaining the following results.The Middle-Upper Yangtze region experienced significant deformations during the Late Indosinian(T_(2)–T_(3)),the Middle Yanshanian(J_(3)–K_(1)),and the Himalayan,and five styles of tectonic deformations mainly occurred,namely superimposed deep burial,uplift,compressional thrusting,multi-layer decollement,and secondary deep burial.The distribution of hydrocarbon reservoirs in the piedmont thrust belts is controlled by the concealed structures on the footwall of the deep nappe.The gentle deformation area in central Sichuan experienced differential uplift,structural-lithologic hydrocarbon reservoirs were formed over a wide area.The eastern Sichuan-western Hunan and Hubei deformation area experienced Jura Mountains-type multi-layer detachment,compressional thrusting,and uplift.In relatively weakly folded and uplifted areas,conventional structural-lithologic hydrocarbon reservoirs have undergone adjustment and re-accumulation,and the shale gas resources are well preserved.In the strongly deformed areas,conventional hydrocarbon reservoirs were destroyed,while unconventional hydrocarbon reservoirs have been partially preserved.The marine strata in the Jianghan Basin experienced compression,thrusting,and denudation in the early stage and secondary deep burial in the late stage.Consequently,the unconventional gas resources have been partially preserved in these strata.Secondary hydrocarbon generation become favorable for conventional hydrocarbon accumulations in the marine strata.
