To effectively quantify the impact of distributed photovoltaic(PV)access on the distribution network,this paper proposes a comprehensive evaluation method of distributed PV grid connection combining subjective and obj...To effectively quantify the impact of distributed photovoltaic(PV)access on the distribution network,this paper proposes a comprehensive evaluation method of distributed PV grid connection combining subjective and objective combination of assignment and technique for order preference by similarity to an ideal solution(TOPSIS)—rank sum ratio(RSR)(TOPSIS-RSR)method.Based on the traditional distribution network evaluation system,a comprehensive evaluation system has been constructed.It fully considers the new development requirements of distributed PV access on the environmental friendliness and absorptive capacity of the distribution grid and comprehensively reflects the impact of distributed PV grid connection.The analytic hierarchy process(AHP)was used to determine the subjective weights of the primary indicators,and the Spearman consistency test was combined to determine the weights of the secondary indicators based on three objective assignment methods.The subjective and objective combination weights of each assessment indicator were calculated through the principle of minimum entropy.Calculate the distance between the indicators to be evaluated and the positive and negative ideal solutions,the relative closeness ranking,and qualitative binning by TOPSIS-RSR method to obtain the comprehensive evaluation results of different scenarios.By setting up different PV grid-connected scenarios and utilizing the IEEE33 node simulation algorithm,the correctness and effectiveness of the proposed subject-object combination assignment and integrated assessment method are verified.展开更多
As the main link of ground engineering,crude oil gathering and transportation systems require huge energy consumption and complex structures.It is necessary to establish an energy efficiency evaluation system for crud...As the main link of ground engineering,crude oil gathering and transportation systems require huge energy consumption and complex structures.It is necessary to establish an energy efficiency evaluation system for crude oil gathering and transportation systems and identify the energy efficiency gaps.In this paper,the energy efficiency evaluation system of the crude oil gathering and transportation system in an oilfield in western China is established.Combined with the big data analysis method,the GA-BP neural network is used to establish the energy efficiency index prediction model for crude oil gathering and transportation systems.The comprehensive energy consumption,gas consumption,power consumption,energy utilization rate,heat utilization rate,and power utilization rate of crude oil gathering and transportation systems are predicted.Considering the efficiency and unit consumption index of the crude oil gathering and transportation system,the energy efficiency evaluation system of the crude oil gathering and transportation system is established based on a game theory combined weighting method and TOPSIS evaluation method,and the subjective weight is determined by the triangular fuzzy analytic hierarchy process.The entropy weight method determines the objective weight,and the combined weight of game theory combines subjectivity with objectivity to comprehensively evaluate the comprehensive energy efficiency of crude oil gathering and transportation systems and their subsystems.Finally,the weak links in energy utilization are identified,and energy conservation and consumption reduction are improved.The above research provides technical support for the green,efficient and intelligent development of crude oil gathering and transportation systems.展开更多
The instability of slope blocks occurred frequently along traffic corridor in Southeastern Tibet(TCST),which was primarily controlled by the rock mass structures.A rapid method evaluating the control effects of rock m...The instability of slope blocks occurred frequently along traffic corridor in Southeastern Tibet(TCST),which was primarily controlled by the rock mass structures.A rapid method evaluating the control effects of rock mass structures was proposed through field statistics of the slopes and rock mass structures along TCST,which combined the stereographic projection method,modified M-JCS model,and limit equilibrium theory.The instabilities of slope blocks along TCST were then evaluated rapidly,and the different control factors of instability were analyzed.Results showed that the probabilities of toppling(5.31%),planar(16.15%),and wedge(35.37%)failure of slope blocks along TCST increased sequentially.These instability modes were respectively controlled by the anti-dip joint,the joint parallel to slope surface with a dip angle smaller than the slope angle(singlejoint),and two groups of joints inclined out of the slope(double-joints).Regarding the control effects on slope block instability,the stabilization ability of doublejoints(72.7%),anti-dip joint(67.4%),and single-joint(57.6%)decreased sequentially,resulting in different probabilities of slope block instability.Additionally,nearby regional faults significantly influenced the joints,leading to spatial heterogeneity and segmental clustering in the stabilization ability provided by joints to the slope blocks.Consequently,the stability of slope blocks gradually weakened as they approached the fault zones.This paper can provide guidance and assistance for investigating the development characteristics of rock mass structures and the stability of slope blocks.展开更多
Taking the Lower Permian Fengcheng Formation shale in Mahu Sag of Junggar Basin,NW China,as an example,core observation,test analysis,geological analysis and numerical simulation were applied to identify the shale oil...Taking the Lower Permian Fengcheng Formation shale in Mahu Sag of Junggar Basin,NW China,as an example,core observation,test analysis,geological analysis and numerical simulation were applied to identify the shale oil micro-migration phenomenon.The hydrocarbon micro-migration in shale oil was quantitatively evaluated and verified by a self-created hydrocarbon expulsion potential method,and the petroleum geological significance of shale oil micro-migration evaluation was determined.Results show that significant micro-migration can be recognized between the organic-rich lamina and organic-poor lamina.The organic-rich lamina has strong hydrocarbon generation ability.The heavy components of hydrocarbon preferentially retained by kerogen swelling or adsorption,while the light components of hydrocarbon were migrated and accumulated to the interbedded felsic or carbonate organic-poor laminae as free oil.About 69% of the Fengcheng Formation shale samples in Well MY1 exhibit hydrocarbon charging phenomenon,while 31% of those exhibit hydrocarbon expulsion phenomenon.The reliability of the micro-migration evaluation results was verified by combining the group components based on the geochromatography effect,two-dimension nuclear magnetic resonance analysis,and the geochemical behavior of inorganic manganese elements in the process of hydrocarbon migration.Micro-migration is a bridge connecting the hydrocarbon accumulation elements in shale formations,which reflects the whole process of shale oil generation,expulsion and accumulation,and controls the content and composition of shale oil.The identification and evaluation of shale oil micro-migration will provide new perspectives for dynamically differential enrichment mechanism of shale oil and establishing a“multi-peak model in oil generation”of shale.展开更多
Historical and cultural blocks are witnesses of history and inheritors of culture. As one of the main spaces for outdoor interaction in historical and cultural blocks, the improvement of its vitality is of great signi...Historical and cultural blocks are witnesses of history and inheritors of culture. As one of the main spaces for outdoor interaction in historical and cultural blocks, the improvement of its vitality is of great significance for the improvement of residential environment and the better inheritance of history and culture. Taking Daopashi Street in Anqing City as an example, an evaluation model of landscape spatial vitality of historical and cultural blocks was constructed from three aspects of viewing function, store status and service facilities, and analytic hierarchy process was used to determine the index weight and vaguely evaluate the landscape spatial vitality of historical and cultural blocks. The results show that through the comparison of weight, architectural style(0.317), the practicability of service facilities(0.168) and plant landscape(0.165) had a significant impact on the landscape spatial vitality of historical and cultural blocks,and the landscape spatial vitality of historical and cultural blocks in Daopashi Street in Anqing City was at a good level.展开更多
The comprehensive development level of the business environment reflects the quality of a region’s economic development,and a good business environment will give a city a strong vitality.This paper uses the entropy m...The comprehensive development level of the business environment reflects the quality of a region’s economic development,and a good business environment will give a city a strong vitality.This paper uses the entropy method to measure and evaluate the business environment of 106 large and medium-sized cities in China from 2017 to 2021.The results show that:From the spatial point of view,the business environment index of China’s cities shows a gradually decreasing pattern from east to west and from south to north.The balance of the business environment of large and medium-sized cities in China is divided into four levels according to the standard deviation of the ranking of each subindex.The greater the standard deviation,the more unbalanced the overall development of the business environment in the region.Finally,this paper put forward countermeasures and suggestions to further optimize the business environment.展开更多
A robust performance evaluation method for vapor cells used in magnetometers is proposed in this work.The performance of the vapor cell determines the sensitivity of the magnetic measurement,which is the core paramete...A robust performance evaluation method for vapor cells used in magnetometers is proposed in this work.The performance of the vapor cell determines the sensitivity of the magnetic measurement,which is the core parameter of a magnetometer.After establishing the relationship between intrinsic sensitivity and the total relaxation rate,the total relaxation rate of the vapor cell can be obtained to represent the intrinsic sensitivity of the magnetometer by fitting the parameters of the magnetic resonance experiments.The method for measurement of the total relaxation rate based on the magnetic resonance experiment proposed in this work is robust and insensitive to ambient noise.Experiments show that,compared with conventional sensitivity measurement,the total relaxation rate affected by magnetic noise below 0.9 n T,pump light frequency noise below 1.5 GHz,pump light power noise below 9%,probe light power noise below 3%and temperature fluctuation of 150±3℃deviates by less than 2%from the noise-free situation.This robust performance evaluation method for vapor cells is conducive to the construction of a multi-channel high-spatial-resolution cardio-encephalography system.展开更多
The interaction between axially adjacent defects is more significant than that between circumferentially aligned defects.However,the existing failure pressure assessment methods cannot accurately predict the failure p...The interaction between axially adjacent defects is more significant than that between circumferentially aligned defects.However,the existing failure pressure assessment methods cannot accurately predict the failure pressure of axial adjacent defects.In the paper,the finite element model is adopted to analyze the influence of defect size,distribution mode and spacing between adjacent defects on failure pressure.A new failure pressure evaluation method is proposed by establishing the effective depth calculation model of corrosion colony with different distribution model.The burst test of X52 pipeline is carried out to verify the applicability of the method.It shows that the results of new method are consistent with the test results of pipeline with various defects and steel grades.展开更多
To screen new maize(Zea mays L.)varieties suitable for food and fodder dual-purpose in Du'an Yao Autonomous County of Guangxi,the agronomic characters,yield and quality indexes of 12 new maize varieties were measu...To screen new maize(Zea mays L.)varieties suitable for food and fodder dual-purpose in Du'an Yao Autonomous County of Guangxi,the agronomic characters,yield and quality indexes of 12 new maize varieties were measured,and the correlation between various indexes were analyzed,and the comprehensive performance of tested varieties was evaluated by membership function method.The results showed that Guidan 671 had the highest grain yield and whole-plant biomass at 10908 and 49965 kg/hm^(2),respectively,and the second was Zhaoyu 215 with a grain yield and whole-plant biomass of 10086 and 47175 kg/hm^(2),respectively.Grain yield was highly significantly positively correlated with ear diameter and 100-grain weight(P<0.01),and significantly correlated with whole-plant biomass,starch content,ear length and grain number per row(P<0.05);and the whole-plant biomass was highly significantly correlated with the number of grains per row(P<0.01),and significantly correlated with starch content,panicle length,plant height and panicle height(P<0.05).The comprehensive performance scores of the tested varieties from high to low were Guidan 671,Zhaoyu 215,Guidan 669,Guidan 6208,Guidan 666,Guidan 6205,Guidan 660,Guidan 6203,Guidan 6206,Guidan 162,Guidan 668 and Guidan 673.According to the values of membership function and combined with various indexes,Guidan 671 and Zhaoyu 215 had good comprehensive performance,and could be used as the first choice for food and fodder dual-purpose maize varieties in Du'an Yao Autonomous County.展开更多
The primary objective of this study is to apply the Evaluation Grid Method(EGM)and the continuous fuzzy Kano quality model to explore the cognitive preferences of Taiwan China residents regarding the beauty of Taiwan...The primary objective of this study is to apply the Evaluation Grid Method(EGM)and the continuous fuzzy Kano quality model to explore the cognitive preferences of Taiwan China residents regarding the beauty of Taiwan’s China landscape paintings.The aim is to contribute to the development of social and cultural art and promote the widespread appeal of art products.Through a literature review,consultations with aesthetic experts,and the application of Miryoku Engineering’s EGM,this paper consolidates the factors that contribute to the attractiveness of painting art products among Taiwan China residents,taking into account various aesthetic qualities.Simultaneously,the paper introduces the use of the triangular fuzzy golden ratio scale semantics,specifically the equal-ratio aesthetic scale semantics,as a replacement for the traditional subjective consciousness model.Departing from the traditional discrete Kano model that employs the mode as the standard for evaluating quality,this study applies triangular fuzzy numbers to the continuous Kano quality model to analyze the diverse preferences and evaluation standards of the public.The hope is that this research methodology will not only deepen Taiwan China residents’understanding and aesthetic literacy of painting art but also serve as a reference for the popularization of art products.展开更多
Considering the difficulty of fuzzy synthetic evaluation method in calculation of the multiple factors and ignorance of the relationship among evaluating objects, a new weight evaluation process using entropy method w...Considering the difficulty of fuzzy synthetic evaluation method in calculation of the multiple factors and ignorance of the relationship among evaluating objects, a new weight evaluation process using entropy method was introduced. This improved method for determination of weight of the evaluating indicators was applied in water quality assessment of the Three Gorges reservoir area. The results showed that this method was favorable for fuzzy synthetic evaluation when there were more than one evaluating objects. One calculation was enough for calculating every monitoring point. Compared with the original evaluation method, the method predigested the fuzzy synthetic evaluation process greatly and the evaluation results are more reasonable.展开更多
Traditional cement concrete has the disadvantages of low tensile strength,poor toughness,and rapid development of cracks while cracking,which causes a significantly negative influence on the safety and durability of c...Traditional cement concrete has the disadvantages of low tensile strength,poor toughness,and rapid development of cracks while cracking,which causes a significantly negative influence on the safety and durability of concrete road pavement.This paper presents a state-of-the-art review of toughness improvement mechanisms and evaluation methods of cement concrete for road pavement.The review indicates that(i)The performance of concrete material depends on its material composition and internal structure.Aggregate size,cement properties and admixtures are the main factors of concrete toughness.(ii)The incorporation of rubber or fiber in pavement concrete improves the toughness of concrete materials.However,these additions must be maintained within a reasonable range.The amount of rubber and fiber are encouraged not more than 30%of the volume of fine aggregate and 2%of the volume of concrete,respectively.(iii)The toughness of pavement concrete material includes the toughness regarding bending,impact and fracture.The toughness of cement concrete for highway and municipal pavement is generally evaluated by bending and fracture toughness,while the toughness of airfield pavement concrete is more focused on impact toughness.(iv)The toughening measures of cement concrete for road pavement are mainly mixed with rubber or fiber,while these two materials have their defects,and the application of hightoughness cement concrete in the actual road still faces many challenges.For example,the synergistic effect of rubber and fiber,the development and application of new flexible admixtures,and the formulation of the toughness index of pavement cement concrete materials need further research.展开更多
The deformation characteristic of bland in deep drawing is discussed. It is pointed out that the friction and lubrication conditions in for drawing are different from that in mechanical motion or machine work or other...The deformation characteristic of bland in deep drawing is discussed. It is pointed out that the friction and lubrication conditions in for drawing are different from that in mechanical motion or machine work or other plastic process. The common test methods in laboratories are analyzed. It shows that though all those test methods can test the friction coefficient, the probe test method is most suitable for the research of friction and lubrication and the process in deep drawing, for this method is identical with the actual work condition either from the test principle or deformation status of the blank. Last the successful application in the deep drawing simulator newly developed the the probe method are intro- duced in detail.展开更多
The existing researches of the evaluation method of ride comfort of vehicle mainly focus on the level of human feelings to vibration. The level of human feelings to vibration is influenced by many factors, however, th...The existing researches of the evaluation method of ride comfort of vehicle mainly focus on the level of human feelings to vibration. The level of human feelings to vibration is influenced by many factors, however, the ride comfort according to the common principle of probability and statistics and simple binary logic is tmable to reflect these uncertainties. The random fuzzy evaluation model from people subjective response to vibration is adopted in the paper, these uncertainties are analyzed from the angle of psychological physics. Discussing the traditional evaluation of ride comfort during vehicle vibration, a fuzzily random evaluation model on the basis of annoyance rate is proposed for the human body's subjective response to vibration, with relevant fuzzy membership function and probability distribution given. A half-car four degrees of freedom suspension vibration model is described, subject to irregular excitations from the road surface, with the aid of software Matlab/Simulink. A new kind of evaluation method for ride comfort of vehicles is proposed in the paper, i.e., the annoyance rate evaluation method. The genetic algorithm and neural network control theory are used to control the system. Simulation results are obtained, such as the comparison of comfort reaction to vibration environments between before and after control, relationship of annoyance rate to vibration frequency and weighted acceleration, based on ISO 2631 / 1 (1982), ISO 2631-1 (1997) and annoyance rate evaluation method, respectively. Simulated assessment results indicate that the proposed active suspension systems prove to be effective in the vibration isolation of the suspension system, and the subjective response of human being can be promoted from very uncomfortable to a little uncomfortable. Furthermore, the novel evaluation method based on annoyance rate can further estimate quantitatively the number of passengers who feel discomfort due to vibration. A new analysis method of vehicle comfort is presented.展开更多
Based on the regional water resources carrying capacity(WRCC)evaluation principles and evaluation index system in the National Technical Outline of Water Resources Carrying Capacity Monitoring and Early Warning(hereaf...Based on the regional water resources carrying capacity(WRCC)evaluation principles and evaluation index system in the National Technical Outline of Water Resources Carrying Capacity Monitoring and Early Warning(hereafter referred to as the Technical Outline),this paper elaborates on the collection and sorting of the basic data of water resources conditions,water resources development and utilization status,social and economic development in basins,analysis and examination of integrity,consistency,normativeness,and rationality of the basic data,and the necessity of WRCC evaluation.This paper also describes the technique of evaluating the WRCC in prefecture-level cities and city-level administrative divisions in the District of the Taihu Lake Basin,which is composed of the Taihu Lake Basin and the Southeastern River Basin.The evaluation process combines the binary index evaluation method and reduction index evaluation method.The former,recommended by the Technical Outline,uses the total water use and the amount of exploited groundwater as evaluation indices,showing stronger operability,while the latter is developed by simplifying and optimizing the comprehensive index system with greater systematicness and completeness.The mutual validation and adjustment of the results of the above-mentioned two evaluation methods indicate that the WRCC of the District of the Taihu Lake Basin is overloaded in general because some prefecture-level cities and city-level administrative divisions in the Taihu Lake Basin and the Southeastern River Basin are in a severely overloaded state.In order to explain this conclusion,this paper analyzes the causes of WRCC overloading from the aspects of basin water environment,water resources development and utilization,water resources regulation and control ability,water resources utilization efficiency,and water resources management.展开更多
The carbonate reservoirs in the Tarim Basin are characterized by low matrix-porosity,heterogeneity and anisotropy,which make it difficult to predict and evaluate these reservoirs.The reservoir formations in Lundong ar...The carbonate reservoirs in the Tarim Basin are characterized by low matrix-porosity,heterogeneity and anisotropy,which make it difficult to predict and evaluate these reservoirs.The reservoir formations in Lundong area experienced a series of diagenesis and tectonic evolution stages.And secondary storage spaces such as fractures and dissolution caves were developed while nearly all the primary pores have disappeared.Based on a summary of different types of storage spaces and their responses in conventional logs,FMI and full waveform sonic logs which are sensitive to different reservoirs,the comprehensive probability index (CPI) method is applied to evaluating the reservoirs and a standard of reservoir classification is established.By comparing the evaluation results with actual welllogging results,the method has proven to be practical for formation evaluation of carbonate reservoirs,especially for the fractured carbonate reservoirs.In reservoir fluid identification,the multivariate stepwise discriminant analysis (MSDA) method is introduced.Combining the CPI method and MSDA method,comprehensive formation evaluation has been performed for fractured and caved carbonate reservoirs in the Tarim Basin.Additionally,on the basis of secondary pore inversion results,another new method of formation evaluation is also proposed in the discussion part of this paper.Through detailed application result analysis,the method shows a promising capability for formation evaluation of complex carbonate reservoirs dominated by various secondary pores such as holes,caves,and cracks.展开更多
Straightness error is an important parameter in measuring high-precision shafts. New generation geometrical product speeifieation(GPS) requires the measurement uncertainty characterizing the reliability of the resul...Straightness error is an important parameter in measuring high-precision shafts. New generation geometrical product speeifieation(GPS) requires the measurement uncertainty characterizing the reliability of the results should be given together when the measurement result is given. Nowadays most researches on straightness focus on error calculation and only several research projects evaluate the measurement uncertainty based on "The Guide to the Expression of Uncertainty in Measurement(GUM)". In order to compute spatial straightness error(SSE) accurately and rapidly and overcome the limitations of GUM, a quasi particle swarm optimization(QPSO) is proposed to solve the minimum zone SSE and Monte Carlo Method(MCM) is developed to estimate the measurement uncertainty. The mathematical model of minimum zone SSE is formulated. In QPSO quasi-random sequences are applied to the generation of the initial position and velocity of particles and their velocities are modified by the constriction factor approach. The flow of measurement uncertainty evaluation based on MCM is proposed, where the heart is repeatedly sampling from the probability density function(PDF) for every input quantity and evaluating the model in each case. The minimum zone SSE of a shaft measured on a Coordinate Measuring Machine(CMM) is calculated by QPSO and the measurement uncertainty is evaluated by MCM on the basis of analyzing the uncertainty contributors. The results show that the uncertainty directly influences the product judgment result. Therefore it is scientific and reasonable to consider the influence of the uncertainty in judging whether the parts are accepted or rejected, especially for those located in the uncertainty zone. The proposed method is especially suitable when the PDF of the measurand cannot adequately be approximated by a Gaussian distribution or a scaled and shifted t-distribution and the measurement model is non-linear.展开更多
Evaluation of structural performance under seismic excitations from low intensity to high intensity is essential to verify the seismic resistant capacity of a structure, and usually carried out by the incremental dyna...Evaluation of structural performance under seismic excitations from low intensity to high intensity is essential to verify the seismic resistant capacity of a structure, and usually carried out by the incremental dynamic analysis (IDA) method or pushover method. The recently developed endurance time (ET) method is another method that uses dynamic pushover excitations, i.e., endurance time acceleration function, to obtain results similar to those obtained by IDA or pushover methods with low computational cost and acceptable accuracy. This study proposes an improvement on the ET method by considering more restrictions for both the elastic and inelastic response spectra in the generation procedure, and by specifying a target duration. Four reinforced concrete frame structures with 4, 8, 12, and 16 stories are adopted to verify the accuracy of the improved method. Comparison of the results obtained by the proposed method, the ET method and the IDA method shows that the improved method has a higher accuracy than the ET method. For evaluation of structural responses under specifi c ground motion intensity, which is typically required in seismic design codes, the results obtained by the proposed method are compared with fi ve commonly used ground motion selection methods, and shows the proposed method provides acceptable accuracy for engineering applications.展开更多
For the gray attributes of the equipment program and its difficulty to carry out the quantitative assessment of the equipment program information, the gray relation projection method is simply reviewed. Combining the ...For the gray attributes of the equipment program and its difficulty to carry out the quantitative assessment of the equipment program information, the gray relation projection method is simply reviewed. Combining the super-data envelopment analysis(DEA) model and the gray system theory, a new super-DEA for measuring the weight is proposed, and a gray relation projection model is established to rank the equipment programs. Finally, this approach is used to evaluate the equipment program. The results are verified valid and can provide a new way for evaluating the equipment program.展开更多
Taking a high-speed train in China as an example,using computer simulation technology and comparing with the test data,the three current methods including linear stability analysis method,nonlinear stability analysis ...Taking a high-speed train in China as an example,using computer simulation technology and comparing with the test data,the three current methods including linear stability analysis method,nonlinear stability analysis method and the field testing criterion are studied to evaluate stability of high-speed trains.A new stability evaluation method is proposed which can be used to evaluate lateral stability of high-speed vehicle based on the codes of UIC 515and UIC 518.From the viewpoint of taking the most unfavorable track conditions into account and improving the safety margin,the new method uses the root mean square of bogie lateral acceleration as a criterion to evaluate the lateral stability of high-speed trains.Numerical example shows that the proposed method not only considers the forced vibration caused by track irregularities in the actual practice,but also takes the instability self-excited vibration into account,so it can realize early warning of bogie slight unstable oscillation,meanwhile the method itself does not involve complex algorithms which has the possibility of engineering applications.展开更多
基金support of the project“State Grid Corporation Headquarters Science and Technology Program(5108-202299258A-1-0-ZB)”.
文摘To effectively quantify the impact of distributed photovoltaic(PV)access on the distribution network,this paper proposes a comprehensive evaluation method of distributed PV grid connection combining subjective and objective combination of assignment and technique for order preference by similarity to an ideal solution(TOPSIS)—rank sum ratio(RSR)(TOPSIS-RSR)method.Based on the traditional distribution network evaluation system,a comprehensive evaluation system has been constructed.It fully considers the new development requirements of distributed PV access on the environmental friendliness and absorptive capacity of the distribution grid and comprehensively reflects the impact of distributed PV grid connection.The analytic hierarchy process(AHP)was used to determine the subjective weights of the primary indicators,and the Spearman consistency test was combined to determine the weights of the secondary indicators based on three objective assignment methods.The subjective and objective combination weights of each assessment indicator were calculated through the principle of minimum entropy.Calculate the distance between the indicators to be evaluated and the positive and negative ideal solutions,the relative closeness ranking,and qualitative binning by TOPSIS-RSR method to obtain the comprehensive evaluation results of different scenarios.By setting up different PV grid-connected scenarios and utilizing the IEEE33 node simulation algorithm,the correctness and effectiveness of the proposed subject-object combination assignment and integrated assessment method are verified.
基金This work was financially supported by the National Natural Science Foundation of China(52074089 and 52104064)Natural Science Foundation of Heilongjiang Province of China(LH2019E019).
文摘As the main link of ground engineering,crude oil gathering and transportation systems require huge energy consumption and complex structures.It is necessary to establish an energy efficiency evaluation system for crude oil gathering and transportation systems and identify the energy efficiency gaps.In this paper,the energy efficiency evaluation system of the crude oil gathering and transportation system in an oilfield in western China is established.Combined with the big data analysis method,the GA-BP neural network is used to establish the energy efficiency index prediction model for crude oil gathering and transportation systems.The comprehensive energy consumption,gas consumption,power consumption,energy utilization rate,heat utilization rate,and power utilization rate of crude oil gathering and transportation systems are predicted.Considering the efficiency and unit consumption index of the crude oil gathering and transportation system,the energy efficiency evaluation system of the crude oil gathering and transportation system is established based on a game theory combined weighting method and TOPSIS evaluation method,and the subjective weight is determined by the triangular fuzzy analytic hierarchy process.The entropy weight method determines the objective weight,and the combined weight of game theory combines subjectivity with objectivity to comprehensively evaluate the comprehensive energy efficiency of crude oil gathering and transportation systems and their subsystems.Finally,the weak links in energy utilization are identified,and energy conservation and consumption reduction are improved.The above research provides technical support for the green,efficient and intelligent development of crude oil gathering and transportation systems.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.41941019,42177142)the Second Tibetan Plateau Scientific Expedition and Research(STEP)program(Grant NO.2019QZKK0904)the Fundamental Research Funds for the Central Universities,CHD(Grant No.300102212213).
文摘The instability of slope blocks occurred frequently along traffic corridor in Southeastern Tibet(TCST),which was primarily controlled by the rock mass structures.A rapid method evaluating the control effects of rock mass structures was proposed through field statistics of the slopes and rock mass structures along TCST,which combined the stereographic projection method,modified M-JCS model,and limit equilibrium theory.The instabilities of slope blocks along TCST were then evaluated rapidly,and the different control factors of instability were analyzed.Results showed that the probabilities of toppling(5.31%),planar(16.15%),and wedge(35.37%)failure of slope blocks along TCST increased sequentially.These instability modes were respectively controlled by the anti-dip joint,the joint parallel to slope surface with a dip angle smaller than the slope angle(singlejoint),and two groups of joints inclined out of the slope(double-joints).Regarding the control effects on slope block instability,the stabilization ability of doublejoints(72.7%),anti-dip joint(67.4%),and single-joint(57.6%)decreased sequentially,resulting in different probabilities of slope block instability.Additionally,nearby regional faults significantly influenced the joints,leading to spatial heterogeneity and segmental clustering in the stabilization ability provided by joints to the slope blocks.Consequently,the stability of slope blocks gradually weakened as they approached the fault zones.This paper can provide guidance and assistance for investigating the development characteristics of rock mass structures and the stability of slope blocks.
基金Supported by the National Natural Science Foundation(42202133,42072174,42130803,41872148)PetroChina Science and Technology Innovation Fund(2023DQ02-0106)PetroChina Basic Technology Project(2021DJ0101).
文摘Taking the Lower Permian Fengcheng Formation shale in Mahu Sag of Junggar Basin,NW China,as an example,core observation,test analysis,geological analysis and numerical simulation were applied to identify the shale oil micro-migration phenomenon.The hydrocarbon micro-migration in shale oil was quantitatively evaluated and verified by a self-created hydrocarbon expulsion potential method,and the petroleum geological significance of shale oil micro-migration evaluation was determined.Results show that significant micro-migration can be recognized between the organic-rich lamina and organic-poor lamina.The organic-rich lamina has strong hydrocarbon generation ability.The heavy components of hydrocarbon preferentially retained by kerogen swelling or adsorption,while the light components of hydrocarbon were migrated and accumulated to the interbedded felsic or carbonate organic-poor laminae as free oil.About 69% of the Fengcheng Formation shale samples in Well MY1 exhibit hydrocarbon charging phenomenon,while 31% of those exhibit hydrocarbon expulsion phenomenon.The reliability of the micro-migration evaluation results was verified by combining the group components based on the geochromatography effect,two-dimension nuclear magnetic resonance analysis,and the geochemical behavior of inorganic manganese elements in the process of hydrocarbon migration.Micro-migration is a bridge connecting the hydrocarbon accumulation elements in shale formations,which reflects the whole process of shale oil generation,expulsion and accumulation,and controls the content and composition of shale oil.The identification and evaluation of shale oil micro-migration will provide new perspectives for dynamically differential enrichment mechanism of shale oil and establishing a“multi-peak model in oil generation”of shale.
基金the Research on the Application of the Perception Teaching of“Graphics”in Architectural Design Course(JZ213702)Landscape Architecture Stracture(JZ213704)+1 种基金Research on the Teaching of Architectural Design Course for Urban and Rural Planning Major with the concept of“Local Design”(JZ223706)Anhui Provincial Key Laboratory of Huizhou Architecture Open Subjects Funding Project(HPJZ-2020-03).
文摘Historical and cultural blocks are witnesses of history and inheritors of culture. As one of the main spaces for outdoor interaction in historical and cultural blocks, the improvement of its vitality is of great significance for the improvement of residential environment and the better inheritance of history and culture. Taking Daopashi Street in Anqing City as an example, an evaluation model of landscape spatial vitality of historical and cultural blocks was constructed from three aspects of viewing function, store status and service facilities, and analytic hierarchy process was used to determine the index weight and vaguely evaluate the landscape spatial vitality of historical and cultural blocks. The results show that through the comparison of weight, architectural style(0.317), the practicability of service facilities(0.168) and plant landscape(0.165) had a significant impact on the landscape spatial vitality of historical and cultural blocks,and the landscape spatial vitality of historical and cultural blocks in Daopashi Street in Anqing City was at a good level.
文摘The comprehensive development level of the business environment reflects the quality of a region’s economic development,and a good business environment will give a city a strong vitality.This paper uses the entropy method to measure and evaluate the business environment of 106 large and medium-sized cities in China from 2017 to 2021.The results show that:From the spatial point of view,the business environment index of China’s cities shows a gradually decreasing pattern from east to west and from south to north.The balance of the business environment of large and medium-sized cities in China is divided into four levels according to the standard deviation of the ranking of each subindex.The greater the standard deviation,the more unbalanced the overall development of the business environment in the region.Finally,this paper put forward countermeasures and suggestions to further optimize the business environment.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.62173020 and 62103381)。
文摘A robust performance evaluation method for vapor cells used in magnetometers is proposed in this work.The performance of the vapor cell determines the sensitivity of the magnetic measurement,which is the core parameter of a magnetometer.After establishing the relationship between intrinsic sensitivity and the total relaxation rate,the total relaxation rate of the vapor cell can be obtained to represent the intrinsic sensitivity of the magnetometer by fitting the parameters of the magnetic resonance experiments.The method for measurement of the total relaxation rate based on the magnetic resonance experiment proposed in this work is robust and insensitive to ambient noise.Experiments show that,compared with conventional sensitivity measurement,the total relaxation rate affected by magnetic noise below 0.9 n T,pump light frequency noise below 1.5 GHz,pump light power noise below 9%,probe light power noise below 3%and temperature fluctuation of 150±3℃deviates by less than 2%from the noise-free situation.This robust performance evaluation method for vapor cells is conducive to the construction of a multi-channel high-spatial-resolution cardio-encephalography system.
基金supported by the Key Scientific Research Projects of Colleges and Universities in Henan Province(Grant No.23A560013)the National Key R&D Program of the“14th Five-Year Plan”(Grant No.2022YFC3801001)+1 种基金Henan Provincial Youth Science Foundation(Grant No.232300421328)the Leading Talents in Zhongyuan Technology Innovation(Grant No.234200510014).
文摘The interaction between axially adjacent defects is more significant than that between circumferentially aligned defects.However,the existing failure pressure assessment methods cannot accurately predict the failure pressure of axial adjacent defects.In the paper,the finite element model is adopted to analyze the influence of defect size,distribution mode and spacing between adjacent defects on failure pressure.A new failure pressure evaluation method is proposed by establishing the effective depth calculation model of corrosion colony with different distribution model.The burst test of X52 pipeline is carried out to verify the applicability of the method.It shows that the results of new method are consistent with the test results of pipeline with various defects and steel grades.
基金Supported by Guangxi Key Research and Development Plan(GK AB21196052)Guangxi Science and Technology Planning Project(GK AD20297117)+2 种基金Guangxi Science and Technology Major Project(GK AA17204064-4)Special Project of Basic Scientific Research Business of Guangxi Academy of Agricultural Sciences(GNK 2021YT015GNK 2020YM90)。
文摘To screen new maize(Zea mays L.)varieties suitable for food and fodder dual-purpose in Du'an Yao Autonomous County of Guangxi,the agronomic characters,yield and quality indexes of 12 new maize varieties were measured,and the correlation between various indexes were analyzed,and the comprehensive performance of tested varieties was evaluated by membership function method.The results showed that Guidan 671 had the highest grain yield and whole-plant biomass at 10908 and 49965 kg/hm^(2),respectively,and the second was Zhaoyu 215 with a grain yield and whole-plant biomass of 10086 and 47175 kg/hm^(2),respectively.Grain yield was highly significantly positively correlated with ear diameter and 100-grain weight(P<0.01),and significantly correlated with whole-plant biomass,starch content,ear length and grain number per row(P<0.05);and the whole-plant biomass was highly significantly correlated with the number of grains per row(P<0.01),and significantly correlated with starch content,panicle length,plant height and panicle height(P<0.05).The comprehensive performance scores of the tested varieties from high to low were Guidan 671,Zhaoyu 215,Guidan 669,Guidan 6208,Guidan 666,Guidan 6205,Guidan 660,Guidan 6203,Guidan 6206,Guidan 162,Guidan 668 and Guidan 673.According to the values of membership function and combined with various indexes,Guidan 671 and Zhaoyu 215 had good comprehensive performance,and could be used as the first choice for food and fodder dual-purpose maize varieties in Du'an Yao Autonomous County.
文摘The primary objective of this study is to apply the Evaluation Grid Method(EGM)and the continuous fuzzy Kano quality model to explore the cognitive preferences of Taiwan China residents regarding the beauty of Taiwan’s China landscape paintings.The aim is to contribute to the development of social and cultural art and promote the widespread appeal of art products.Through a literature review,consultations with aesthetic experts,and the application of Miryoku Engineering’s EGM,this paper consolidates the factors that contribute to the attractiveness of painting art products among Taiwan China residents,taking into account various aesthetic qualities.Simultaneously,the paper introduces the use of the triangular fuzzy golden ratio scale semantics,specifically the equal-ratio aesthetic scale semantics,as a replacement for the traditional subjective consciousness model.Departing from the traditional discrete Kano model that employs the mode as the standard for evaluating quality,this study applies triangular fuzzy numbers to the continuous Kano quality model to analyze the diverse preferences and evaluation standards of the public.The hope is that this research methodology will not only deepen Taiwan China residents’understanding and aesthetic literacy of painting art but also serve as a reference for the popularization of art products.
基金The National Natural Science Foundation of China (No. 50378008)
文摘Considering the difficulty of fuzzy synthetic evaluation method in calculation of the multiple factors and ignorance of the relationship among evaluating objects, a new weight evaluation process using entropy method was introduced. This improved method for determination of weight of the evaluating indicators was applied in water quality assessment of the Three Gorges reservoir area. The results showed that this method was favorable for fuzzy synthetic evaluation when there were more than one evaluating objects. One calculation was enough for calculating every monitoring point. Compared with the original evaluation method, the method predigested the fuzzy synthetic evaluation process greatly and the evaluation results are more reasonable.
基金This research is financially supported by the Research Program of China Railway Siyuan Survey and Design Group Co.,Ltd.(Grant number 2021K066).
文摘Traditional cement concrete has the disadvantages of low tensile strength,poor toughness,and rapid development of cracks while cracking,which causes a significantly negative influence on the safety and durability of concrete road pavement.This paper presents a state-of-the-art review of toughness improvement mechanisms and evaluation methods of cement concrete for road pavement.The review indicates that(i)The performance of concrete material depends on its material composition and internal structure.Aggregate size,cement properties and admixtures are the main factors of concrete toughness.(ii)The incorporation of rubber or fiber in pavement concrete improves the toughness of concrete materials.However,these additions must be maintained within a reasonable range.The amount of rubber and fiber are encouraged not more than 30%of the volume of fine aggregate and 2%of the volume of concrete,respectively.(iii)The toughness of pavement concrete material includes the toughness regarding bending,impact and fracture.The toughness of cement concrete for highway and municipal pavement is generally evaluated by bending and fracture toughness,while the toughness of airfield pavement concrete is more focused on impact toughness.(iv)The toughening measures of cement concrete for road pavement are mainly mixed with rubber or fiber,while these two materials have their defects,and the application of hightoughness cement concrete in the actual road still faces many challenges.For example,the synergistic effect of rubber and fiber,the development and application of new flexible admixtures,and the formulation of the toughness index of pavement cement concrete materials need further research.
文摘The deformation characteristic of bland in deep drawing is discussed. It is pointed out that the friction and lubrication conditions in for drawing are different from that in mechanical motion or machine work or other plastic process. The common test methods in laboratories are analyzed. It shows that though all those test methods can test the friction coefficient, the probe test method is most suitable for the research of friction and lubrication and the process in deep drawing, for this method is identical with the actual work condition either from the test principle or deformation status of the blank. Last the successful application in the deep drawing simulator newly developed the the probe method are intro- duced in detail.
基金supported by National University Basic Scientific Research Fund of China(Grant No.N100403009)National Natural Science Foundation of China(Grant No.50875041)
文摘The existing researches of the evaluation method of ride comfort of vehicle mainly focus on the level of human feelings to vibration. The level of human feelings to vibration is influenced by many factors, however, the ride comfort according to the common principle of probability and statistics and simple binary logic is tmable to reflect these uncertainties. The random fuzzy evaluation model from people subjective response to vibration is adopted in the paper, these uncertainties are analyzed from the angle of psychological physics. Discussing the traditional evaluation of ride comfort during vehicle vibration, a fuzzily random evaluation model on the basis of annoyance rate is proposed for the human body's subjective response to vibration, with relevant fuzzy membership function and probability distribution given. A half-car four degrees of freedom suspension vibration model is described, subject to irregular excitations from the road surface, with the aid of software Matlab/Simulink. A new kind of evaluation method for ride comfort of vehicles is proposed in the paper, i.e., the annoyance rate evaluation method. The genetic algorithm and neural network control theory are used to control the system. Simulation results are obtained, such as the comparison of comfort reaction to vibration environments between before and after control, relationship of annoyance rate to vibration frequency and weighted acceleration, based on ISO 2631 / 1 (1982), ISO 2631-1 (1997) and annoyance rate evaluation method, respectively. Simulated assessment results indicate that the proposed active suspension systems prove to be effective in the vibration isolation of the suspension system, and the subjective response of human being can be promoted from very uncomfortable to a little uncomfortable. Furthermore, the novel evaluation method based on annoyance rate can further estimate quantitatively the number of passengers who feel discomfort due to vibration. A new analysis method of vehicle comfort is presented.
基金supported by the National Natural Science Foundation of China(Grant No.51379181)Phase Ⅲ Project(2018-2021)of the Priority Academic Program Development of Jiangsu Higher Education Institutions
文摘Based on the regional water resources carrying capacity(WRCC)evaluation principles and evaluation index system in the National Technical Outline of Water Resources Carrying Capacity Monitoring and Early Warning(hereafter referred to as the Technical Outline),this paper elaborates on the collection and sorting of the basic data of water resources conditions,water resources development and utilization status,social and economic development in basins,analysis and examination of integrity,consistency,normativeness,and rationality of the basic data,and the necessity of WRCC evaluation.This paper also describes the technique of evaluating the WRCC in prefecture-level cities and city-level administrative divisions in the District of the Taihu Lake Basin,which is composed of the Taihu Lake Basin and the Southeastern River Basin.The evaluation process combines the binary index evaluation method and reduction index evaluation method.The former,recommended by the Technical Outline,uses the total water use and the amount of exploited groundwater as evaluation indices,showing stronger operability,while the latter is developed by simplifying and optimizing the comprehensive index system with greater systematicness and completeness.The mutual validation and adjustment of the results of the above-mentioned two evaluation methods indicate that the WRCC of the District of the Taihu Lake Basin is overloaded in general because some prefecture-level cities and city-level administrative divisions in the Taihu Lake Basin and the Southeastern River Basin are in a severely overloaded state.In order to explain this conclusion,this paper analyzes the causes of WRCC overloading from the aspects of basin water environment,water resources development and utilization,water resources regulation and control ability,water resources utilization efficiency,and water resources management.
基金co-supported by the National Basic Research Program of China(Grant No.2011CB201103)the National Science and Technology Major Project(GrantNo.2011ZX05004003)
文摘The carbonate reservoirs in the Tarim Basin are characterized by low matrix-porosity,heterogeneity and anisotropy,which make it difficult to predict and evaluate these reservoirs.The reservoir formations in Lundong area experienced a series of diagenesis and tectonic evolution stages.And secondary storage spaces such as fractures and dissolution caves were developed while nearly all the primary pores have disappeared.Based on a summary of different types of storage spaces and their responses in conventional logs,FMI and full waveform sonic logs which are sensitive to different reservoirs,the comprehensive probability index (CPI) method is applied to evaluating the reservoirs and a standard of reservoir classification is established.By comparing the evaluation results with actual welllogging results,the method has proven to be practical for formation evaluation of carbonate reservoirs,especially for the fractured carbonate reservoirs.In reservoir fluid identification,the multivariate stepwise discriminant analysis (MSDA) method is introduced.Combining the CPI method and MSDA method,comprehensive formation evaluation has been performed for fractured and caved carbonate reservoirs in the Tarim Basin.Additionally,on the basis of secondary pore inversion results,another new method of formation evaluation is also proposed in the discussion part of this paper.Through detailed application result analysis,the method shows a promising capability for formation evaluation of complex carbonate reservoirs dominated by various secondary pores such as holes,caves,and cracks.
基金supported by National Natural Science Foundation of China (Grant No. 51075198)Jiangsu Provincial Natural Science Foundation of China (Grant No. BK2010479)+2 种基金Innovation Research of Nanjing Institute of Technology, China (Grant No. CKJ20100008)Jiangsu Provincial Foundation of 333 Talents Engineering of ChinaJiangsu Provincial Foundation of Six Talented Peak of China
文摘Straightness error is an important parameter in measuring high-precision shafts. New generation geometrical product speeifieation(GPS) requires the measurement uncertainty characterizing the reliability of the results should be given together when the measurement result is given. Nowadays most researches on straightness focus on error calculation and only several research projects evaluate the measurement uncertainty based on "The Guide to the Expression of Uncertainty in Measurement(GUM)". In order to compute spatial straightness error(SSE) accurately and rapidly and overcome the limitations of GUM, a quasi particle swarm optimization(QPSO) is proposed to solve the minimum zone SSE and Monte Carlo Method(MCM) is developed to estimate the measurement uncertainty. The mathematical model of minimum zone SSE is formulated. In QPSO quasi-random sequences are applied to the generation of the initial position and velocity of particles and their velocities are modified by the constriction factor approach. The flow of measurement uncertainty evaluation based on MCM is proposed, where the heart is repeatedly sampling from the probability density function(PDF) for every input quantity and evaluating the model in each case. The minimum zone SSE of a shaft measured on a Coordinate Measuring Machine(CMM) is calculated by QPSO and the measurement uncertainty is evaluated by MCM on the basis of analyzing the uncertainty contributors. The results show that the uncertainty directly influences the product judgment result. Therefore it is scientific and reasonable to consider the influence of the uncertainty in judging whether the parts are accepted or rejected, especially for those located in the uncertainty zone. The proposed method is especially suitable when the PDF of the measurand cannot adequately be approximated by a Gaussian distribution or a scaled and shifted t-distribution and the measurement model is non-linear.
基金National Key R&D Program of China under Grant No.2016YFC0701500National Natural Science Foundation of China under Grant No.51578202
文摘Evaluation of structural performance under seismic excitations from low intensity to high intensity is essential to verify the seismic resistant capacity of a structure, and usually carried out by the incremental dynamic analysis (IDA) method or pushover method. The recently developed endurance time (ET) method is another method that uses dynamic pushover excitations, i.e., endurance time acceleration function, to obtain results similar to those obtained by IDA or pushover methods with low computational cost and acceptable accuracy. This study proposes an improvement on the ET method by considering more restrictions for both the elastic and inelastic response spectra in the generation procedure, and by specifying a target duration. Four reinforced concrete frame structures with 4, 8, 12, and 16 stories are adopted to verify the accuracy of the improved method. Comparison of the results obtained by the proposed method, the ET method and the IDA method shows that the improved method has a higher accuracy than the ET method. For evaluation of structural responses under specifi c ground motion intensity, which is typically required in seismic design codes, the results obtained by the proposed method are compared with fi ve commonly used ground motion selection methods, and shows the proposed method provides acceptable accuracy for engineering applications.
基金supported by the National Natural Science Foundation of China(7107307971222106+2 种基金70901069)the Research Foundation of the National Excellent Doctoral Dissertation of Chinathe Research Fund for the Doctoral Program of Higher Education(20133402110028)
文摘For the gray attributes of the equipment program and its difficulty to carry out the quantitative assessment of the equipment program information, the gray relation projection method is simply reviewed. Combining the super-data envelopment analysis(DEA) model and the gray system theory, a new super-DEA for measuring the weight is proposed, and a gray relation projection model is established to rank the equipment programs. Finally, this approach is used to evaluate the equipment program. The results are verified valid and can provide a new way for evaluating the equipment program.
基金Science and technology research and development program of the Ministry of Railways(1219YF1305)
文摘Taking a high-speed train in China as an example,using computer simulation technology and comparing with the test data,the three current methods including linear stability analysis method,nonlinear stability analysis method and the field testing criterion are studied to evaluate stability of high-speed trains.A new stability evaluation method is proposed which can be used to evaluate lateral stability of high-speed vehicle based on the codes of UIC 515and UIC 518.From the viewpoint of taking the most unfavorable track conditions into account and improving the safety margin,the new method uses the root mean square of bogie lateral acceleration as a criterion to evaluate the lateral stability of high-speed trains.Numerical example shows that the proposed method not only considers the forced vibration caused by track irregularities in the actual practice,but also takes the instability self-excited vibration into account,so it can realize early warning of bogie slight unstable oscillation,meanwhile the method itself does not involve complex algorithms which has the possibility of engineering applications.