High-Performance Organic Field-Effect Transistors Based on Two-Dimensional Vat Orange 3 Crystals

The exploration and research of low-cost,environmentally friendly,and sustainable organic semiconductor materials are of immense significance in various fields,including electronics,optoelectronics,and energy conversion.Unfortunately,these semiconductors have almost poor charge transport properties,which range from∼10^(−4) cm^(2)·V^(−1)·s^(−1) to∼10^(−2) cm^(2)·V^(−1)·s^(−1).Vat orange 3,as one of these organic semiconductors,has great potential due to its highly conjugated structure.We obtain high-quality multilayered Vat orange 3 crystals with two-dimensional(2D)growth on h-BN surfaces with thickness of 10–100 nm using physical vapor transport.Raman’s results confirm the stability of the chemical structure of Vat orange 3 during growth.Furthermore,by leveraging the structural advantages of 2D materials,an organic field-effect transistor with a 2D vdW vertical heterostructure is further realized with h-BN encapsulation and multilayered graphene contact electrodes,resulting in an excellent transistor performance with On/Off ratio of 104 and high field-effect mobility of 0.14 cm^(2)·V^(−1)·s^(−1).Our results show the great potential of Vat orange 3 with 2D structures in future nano-electronic applications.Furthermore,we showcase an approach that integrates organic semiconductors with 2D materials,aiming to offer new insights into the study of organic semiconductors.

Heterojunction-engineered carrier transport in elevated-metal metal-oxide thin-film transistors

This study investigates the carrier transport of heterojunction channel in oxide semiconductor thin-film transistor(TFT)using the elevated-metal metal-oxide(EMMO)architecture and indium−zinc oxide(InZnO).The heterojunction band diagram of InZnO bilayer was modified by the cation composition to form the two-dimensional electron gas(2DEG)at the interface quantum well,as verified using a metal−insulator−semiconductor(MIS)device.Although the 2DEG indeed contributes to a higher mobility than the monolayer channel,the competition and cooperation between the gate field and the built-in field strongly affect such mobility-boosting effect,originating from the carrier inelastic collision at the heterojunction interface and the gate field-induced suppression of quantum well.Benefited from the proper energy-band engineering,a high mobility of 84.3 cm2·V^(−1)·s^(−1),a decent threshold voltage(V_(th))of−6.5 V,and a steep subthreshold swing(SS)of 0.29 V/dec were obtained in InZnO-based heterojunction TFT.

Effect of external magnetic field on the instability of THz plasma waves in nanoscale graphene field-effect transistors

The instability of plasma waves in the channel of field-effect transistors will cause the electromagnetic waves with THz frequency.Based on a self-consistent quantum hydrodynamic model,the instability of THz plasmas waves in the channel of graphene field-effect transistors has been investigated with external magnetic field and quantum effects.We analyzed the influence of weak magnetic fields,quantum effects,device size,and temperature on the instability of plasma waves under asymmetric boundary conditions numerically.The results show that the magnetic fields,quantum effects,and the thickness of the dielectric layer between the gate and the channel can increase the radiation frequency.Additionally,we observed that increase in temperature leads to a decrease in both oscillation frequency and instability increment.The numerical results and accompanying images obtained from our simulations provide support for the above conclusions.

Device design principles and bioelectronic applications for flexible organic electrochemical transistors

Organic electrochemical transistors(OECTs) exhibit significant potential for applications in healthcare and human-machine interfaces, due to their tunable synthesis, facile deposition, and excellent biocompatibility. Expanding OECTs to the fexible devices will significantly facilitate stable contact with the skin and enable more possible bioelectronic applications. In this work,we summarize the device physics of fexible OECTs, aiming to offer a foundational understanding and guidelines for material selection and device architecture. Particular attention is paid to the advanced manufacturing approaches, including photolithography and printing techniques, which establish a robust foundation for the commercialization and large-scale fabrication. And abundantly demonstrated examples ranging from biosensors, artificial synapses/neurons, to bioinspired nervous systems are summarized to highlight the considerable prospects of smart healthcare. In the end, the challenges and opportunities are proposed for fexible OECTs. The purpose of this review is not only to elaborate on the basic design principles of fexible OECTs, but also to act as a roadmap for further exploration of wearable OECTs in advanced bio-applications.

Transient Response and Ionic Dynamics in Organic Electrochemical Transistors

The rapid development of organic electrochemical transistors(OECTs)has ushered in a new era in organic electronics,distinguishing itself through its application in a variety of domains,from high-speed logic circuits to sensitive biosensors,and neuromorphic devices like artificial synapses and organic electrochemical random-access memories.Despite recent strides in enhancing OECT performance,driven by the demand for superior transient response capabilities,a comprehensive understanding of the complex interplay between charge and ion transport,alongside electron–ion interactions,as well as the optimization strategies,remains elusive.This review aims to bridge this gap by providing a systematic overview on the fundamental working principles of OECT transient responses,emphasizing advancements in device physics and optimization approaches.We review the critical aspect of transient ion dynamics in both volatile and non-volatile applications,as well as the impact of materials,morphology,device structure strategies on optimizing transient responses.This paper not only offers a detailed overview of the current state of the art,but also identifies promising avenues for future research,aiming to drive future performance advancements in diversified applications.

Photo-driven fin field-effect transistors

The integration between infrared detection and modern microelectronics offers unique opportunities for compact and high-resolution infrared imaging.However,silicon,the cornerstone of modern microelectronics,can only detect light within a limited wavelength range(<1100 nm)due to its bandgap of 1.12 eV,which restricts its utility in the infrared detection realm.Herein,a photo-driven fin field-effect transistor is presented,which breaks the spectral response constraint of conventional silicon detectors while achieving sensitive infrared detection.This device comprises a fin-shaped silicon channel for charge transport and a lead sulfide film for infrared light harvesting.The lead sulfide film wraps the silicon channel to form a“three-dimensional”infrared-sensitive gate,enabling the photovoltage generated at the lead sulfide-silicon junction to effectively modulate the channel conductance.At room temperature,this device realizes a broadband photodetection from visible(635 nm)to short-wave infrared regions(2700 nm),surpassing the working range of the regular indium gallium arsenide and germanium detectors.Furthermore,it exhibits low equivalent noise powers of 3.2×10^(-12) W·Hz^(-1/2) and 2.3×10^(-11) W·Hz^(-1/2) under 1550 nm and 2700 nm illumination,respectively.These results highlight the significant potential of photo-driven fin field-effect transistors in advancing uncooled silicon-based infrared detection.

Force and impulse multi-sensor based on flexible gate dielectric field effect transistor

Nowadays,force sensors play an important role in industrial production,electronic information,medical health,and many other fields.Two-dimensional material-based filed effect transistor(2D-FET)sensors are competitive with nano-level size,lower power consumption,and accurate response.However,few of them has the capability of impulse detection which is a path function,expressing the cumulative effect of the force on the particle over a period of time.Herein we fabricated the flexible polymethyl methacrylate(PMMA)gate dielectric MoS_(2)-FET for force and impulse sensor application.We systematically investigated the responses of the sensor to constant force and varying forces,and achieved the conversion factors of the drain current signals(I_(ds))to the detected impulse(I).The applied force was detected and recorded by I_(ds)with a low power consumption of~30 nW.The sensitivity of the device can reach~8000%and the 4×1 sensor array is able to detect and locate the normal force applied on it.Moreover,there was almost no performance loss for the device as left in the air for two months.

3D Multi-gate Transistors： Concept, Operation, and Fabrication

The multi-gate transistors such as Fin-FETs, Tri-gate FETs, and Gate-all-around （GAA） FETs are remarkable breakthrough in the electronic industry. 3D Transistor is taking the place of the conventional 2D planar transistor for many reasons. 3D transistors afford more scalability, energy efficient performance than planar transistors and increase the control on the channel region to reduce the short channel effect, which enables us to extend Moore＇s law to further extent. In this paper, we will present a review about their structure, operation, types and fabrication.

Fabrication of Bottom-Gate and Top-Gate Transparent ZnO Thin Film Transistors

Transparent zinc oxide thin film transistors （ZnO-TFTs） with bottom-gate and top-gate structures were constructed on 50mm silica glass substrates. The ZnO films were deposited by RF magnetron sputtering and SiO2 films served as the gate insulator layer. We found that the ZnO-TFTs with bottom-gate structure have better electrical performance than those with top-gate structure. The bottom-gate ZnO-TFTs operate as an n-channel enhancement mode, which have clear pinch off and saturation characteristics. The field effect mobility, threshold voltage, and the current on/off ratio were determined to be 18.4cm^2/（V ·s）, - 0. 5V and 10^4 , respectively. Meanwhile, the top-gate ZnO-TFTs exhibit n-chan- nel depletion mode operation and no saturation characteristics were detected. The electrical difference of the devices may be due to the different character of the interface between the channel and insulator layers. The two transistors types have high transparency in the visible light region.

Total Ionizing Dose Radiation Effects on MOS Transistors with Different Layouts

Both nMOS and pMOS transistors with two-edged and multi-finger layouts are fabricated in a standard commercial 0.6μm CMOS/bulk process to study their total ionizing dose （TID） radiation effects. The leakage current, threshold voltage shift, and transconductance of the devices are monitored before and after T-ray irradiation. Different device bias conditions are used during irradiation. The experiment results show that TID radiation effects on nMOS devices are very sensitive to their layout structures. The impact of the layout on TID effects on pMOS devices is slight and can be neglected.

The Theory of Field-Effect Transistors:XI. The Bipolar Electrochemical Currents(1-2-MOS-Gates on Thin-Thick Pure-Impure Base)

The field-effect transistor is inherently bipolar, having simultaneously electron and hole surface and volume channels and currents. The channels and currents are controlled by one or more externally applied transverse electric fields. It has been known as the unipolar field-effect transistor for 55-years since Shockley＇s 1952 invention,because the electron-current theory inevitably neglected the hole current from over-specified internal and boundary conditions, such as the electrical neutrality and the constant hole-electrochemical-potential, resulting in erroneous solutions of the internal and terminal electrical characteristics from the electron channel current alone, which are in gross error when the neglected hole current becomes comparable to the electron current, both in subthreshold and strong inversion. This report presents the general theory, that includes both electron and hole channels and currents. The rectangular （ x, y, z） parallelepiped transistors,uniform in the width direction （z-axis）,with one or two MOS gates on thin and thick,and pure and impure base, are used to illustrate the two-dimensional effects and the correct internal and boundary conditions for the electric and the electron and hole electrochemical potentials. Complete analytical equations of the DC current-voltage characteristics of four common MOS transistor structures are derived without over-specification： the 1-gate on semi-infinite-thick impure-base （the traditional bulk transistor）, the 1-gate on thin impure-silicon layer over oxide-insulated silicon bulk （SOI） ,the 1-gate on thin impure-silicon layer deposited on insulating glass （SOI TFT）, and the 2-gates on thin pure-base （FinFETs）.

A Hybrid Random Number Generator Using Single Electron Tunneling Junctions and MOS Transistors

This paper proposes a novel single electron random number generator （RNG）. The generator consists of multiple tunneling junctions （MTJ） and a hybrid single electron transistor （SET）/MOS output circuit. It is an oscillator-based RNG. MTJ is used to implement a high-frequency oscillator, which uses the inherent physical randomness in tunneling events of the MTJ to achieve large frequency drift. The hybrid SET and MOS output circuit is used to amplify and buffer the output signal of the MTJ oscillator. The RNG circuit generates high-quality random digital sequences with a simple structure. The operation speed of this circuit is as high as 1GHz. The circuit also has good driven capability and low power dissipation. This novel random number generator is a promising device for future cryptographic systems and communication applications.

'The Theory of Field-Effect Transistors XII.The Bipolar Drift and Diffusion Currents(1-2-MOS-Gates on Thin-Thick Pure-Impure Base)

The previous report （XI） gave the electrochemical-potential theory of the Bipolar Field-Effect Transistors. This report （XII） gives the drift-diffusion theory. Both treat 1-gate and 2-gate, pure-base and impure-base, and thin and thick base. Both utilize the surface and bulk potentials as the parametric variables to couple the voltage and current equations. In the present drift-diffusion theory, the very many current terms are identified by their mobility multiplier for the components of drift current,and the diffusivity multiplier for the components of the diffusion current. Complete analytical driftdiffusion equations are presented to give the DC current-voltage characteristics of four common MOS transistor structures. The drift current consists of four terms： 1-D （One-Dimensional） bulk charge drift term, 1-D carrier space-charge drift term,l-D Ex^2 （transverse electric field） drift term,2-D drift term. The diffusion current consists of three terms： 1-D bulk charge diffusion term,l-D carrier space-charge diffusion term,and 2-D diffusion term. The 1-D Ex^2 drift term was missed by all the existing transistor theories, and contributes significantly, as much as 25 % of the total current when the base layer is nearly pure. The 2-D terms come from longitudinal gradient of the longitudinal electric field,which scales as the square of the Debye to Channel length ratio, at 25nm channel length with nearly pure base, （LD/L）^2 = 10^6 but with impurity concentration of 10^18cm^-3 , （LD/L）^2 = 10^-2 .

Influence of High Temperature Treatment on the Performance of Nickel-Induced Laterally Crystallized Thin Film Transistors

Well known for their good performance,thin film transistors (TFTs) with active layers which were nickel induced laterally crystallized,are fabricated by conventional process of dual gate CMOS.The influence of pre high temperature treatment of device fabrication on the performance of TFTs is also investigated.The experiment shows that the high temperature treatment affects the performance of the devices strongly.The best performance is obtained by adopting pre treatment of 1000℃.The mobility of 314cm 2/(V·s) is obtained at NMOS TFTs with pre treatment of 1000℃,which is 10% and 22% higher than that treated at 1100℃ and without pre high temperature treatment,respectively.A maximum on/off current ratio of 3×10 8 is also obtained at 1000℃.Further investigation of uniformity verifies that the result is reliable.

Evaluation of thermal resistance constitution for packaged AlGaN/GaN high electron mobility transistors by structure function method

The evaluation of thermal resistance constitution for packaged A1GaN/GaN high electron mobility transistor （HEMT） by structure function method is proposed in this paper. The evaluation is based on the transient heating measurement of the A1GaN/GaN HEMT by pulsed electrical temperature sensitive parameter method. The extracted chip-level and package-level thermal resistances of the packaged multi-finger A1GaN/GaN HEMT with 400μm SiC substrate are 22.5 K/W and 7.2 K/W respectively, which provides a non-invasive method to evaluate the chip-level thermal resistance of packaged A1GaN/GaN HEMTs. It is also experimentally proved that the extraction of the chip- level thermal resistance by this proposed method is not influenced by package form of the tested device and temperature boundary condition of measurement stage.

Two-Dimensional Transition Metal Dichalcogenides and Their Charge Carrier Mobilities in Field-Effect Transistors

Two-dimensional(2D) materials have attracted extensive interest due to their excellent electrical, thermal,mechanical, and optical properties. Graphene has been one of the most explored 2D materials. However, its zero band gap has limited its applications in electronic devices. Transition metal dichalcogenide(TMDC), another kind of 2D material,has a nonzero direct band gap(same charge carrier momentum in valence and conduction band) at monolayer state,promising for the efficient switching devices(e.g., field-effect transistors). This review mainly focuses on the recent advances in charge carrier mobility and the challenges to achieve high mobility in the electronic devices based on 2DTMDC materials and also includes an introduction of 2D materials along with the synthesis techniques. Finally, this review describes the possible methodology and future prospective to enhance the charge carrier mobility for electronic devices.

Review of gallium oxide based field-effect transistors and Schottky barrier diodes

Gallium oxide(Ga_2O_3), a typical ultra wide bandgap semiconductor, with a bandgap of ~4.9 e V, critical breakdown field of 8 MV/cm, and Baliga's figure of merit of 3444, is promising to be used in high-power and high-voltage devices.Recently, a keen interest in employing Ga_2O_3 in power devices has been aroused. Many researches have verified that Ga_2O_3 is an ideal candidate for fabricating power devices. In this review, we summarized the recent progress of field-effect transistors(FETs) and Schottky barrier diodes(SBDs) based on Ga_2O_3, which may provide a guideline for Ga_2O_3 to be preferably used in power devices fabrication.

Air-stable ambipolar organic field effect transistors with heterojunction of pentacene and N,N'-bis(4-trifluoromethylben-zyl) perylene-3,4,9,10-tetracarboxylic diimide

Fabrication of ambipolar organic field-effect transistors （OFETs） is essential for the achievement of an organic complementary logic circuit. Ambipolar transports in OFETs with heterojunction structures are realized.We select pentacene as a P-type material and N,N＇-bis（4-trifluoromethylben-zyl）perylene-3,4,9,10-tetracarboxylic diimide （PTCDI-TFB） as a n-type material in the active layer of the OFETs.The field-effect transistor shows highly air-stable ambipolar characteristics with a field-effect hole mobility of 0.18 cm^2/（V·s） and field-effect electron mobility of 0.031 cm^2/（V·s）.Furthermore the mobility only slightly decreases after being exposed to air and remains stable even for exposure to air for more than 60 days.The high electron affinity of PTCDI-TFB and the octadecyltrichlorosilane （OTS） self-assembly monolayer between the SiO2 gate dielectric and the organic active layer result in the observed air-stable characteristics of OFETs with high mobility.The results demonstrate that using the OTS as a modified gate insulator layer and using high electron affinity semiconductor materials are two effective methods to fabricate OFETs with air-stable characteristics and high mobility.

Analysis of displacement damage effects on bipolar transistors irradiated by spallation neutrons

Displacement damage induced by neutron irradiation in China Spallation Neutron Source(CSNS) is studied on bipolar transistors with lateral PNP, substrate PNP, and vertical NPN configurations, respectively. Comparison of the effects on different type transistors is conducted based on displacement damage factor, and the differences are analyzed through minority carrier lifetime calculation and structure analysis. The influence of CSNS neutrons irradiation on the lateral PNP transistors is analyzed by the gate-controlled method, including the oxide charge accumulation, surface recombine velocity,and minority carrier lifetime. The results indicate that the total ionizing dose in CSNS neutron radiation environment is negligible in this study. The displacement damage factors based on 1-MeV equivalent neutron flux of different transistors are consistent between Xi’an pulse reactor(XAPR) and CSNS.

Hardening measures for bipolar transistors against microwave-induced damage

In the present paper we study the influences of the bias voltage and the external components on the damage progress of a bipolar transistor induced by high-power microwaves. The mechanism is presented by analyzing the variation in the internal distribution of the temperature in the device. The findings show that the device becomes less vulnerable to damage with an increase in bias voltage. Both the series diode at the base and the relatively low series resistance at the emitter, Re, can obviously prolong the burnout time of the device. However, Re will aid damage to the device when the value is sufficiently high due to the fact that the highest hot spot shifts from the base-emitter junction to the base region. Moreover, the series resistance at the base Rb will weaken the capability of the device to withstand microwave damage.