Wetting front migration model of ion-adsorption rare earth during the multi-hole unsaturated liquid injection

In the process of ion-adsorption rare earth ore leaching,the migration characteristics of the wetting front in multi-hole injection holes and the influence of wetting front intersection effect on the migration distance of wetting fronts are still unclear.Besides,wetting front migration distance and leaching time are usually required to optimize the leaching process.In this study,wetting front migration tests of ionadsorption rare earth ores during the multi-hole fluid injection(the spacing between injection holes was 10 cm,12 cm and 14 cm)and single-hole fluid injection were completed under the constant water head height.At the pre-intersection stage,the wetting front migration laws of ion-adsorption rare earth ores during the multi-hole fluid injection and single-hole fluid injection were identical.At the postintersection stage,the intersection accelerated the wetting front migration.By using the Darcy’s law,the intersection effect of wetting fronts during the multi-hole liquid injection was transformed into the water head height directly above the intersection.Finally,based on the Green-Ampt model,a wetting front migration model of ion-adsorption rare earth ores during the multi-hole unsaturated liquid injection was established.Error analysis results showed that the proposed model can accurately simulate the infiltration process under experimental conditions.The research results enrich the infiltration law and theory of ion-adsorption rare earth ores during the multi-hole liquid injection,and this study provides a scientific basis for optimizing the liquid injection well pattern parameters of ion-adsorption rare earth in situ leaching in the future.

一种S波段雷达通信电子战多功能宽带DAM的设计

本文创新性地提出了一种S波段多功能宽带DAM,首先介绍了该型DAM的顶层架构设计,接着介绍了各个功能组成模块的设计过程,最后给出了该型DAM的指标实现情况。该型DAM可以分时实现雷达、通信及电子战功能,最大瞬时带宽可达200MHz,支持任意波形产生,在多功能综合射频系统中具有良好的应用前景。

Numerical parametric study on the influence of location and inclination of large-scale asperities on the shear strength of concreterock interfaces of small buttress dams

When assessing the sliding stability of a concrete dam,the influence of large-scale asperities in the sliding plane is often ignored due to limitations of the analytical rigid body assessment methods provided by current dam assessment guidelines.However,these asperities can potentially improve the load capacity of a concrete dam in terms of sliding stability.Although their influence in a sliding plane has been thoroughly studied for direct shear,their influence under eccentric loading,as in the case of dams,is unknown.This paper presents the results of a parametric study that used finite element analysis(FEA)to investigate the influence of large-scale asperities on the load capacity of small buttress dams.By varying the inclination and location of an asperity located in the concrete-rock interface along with the strength of the rock foundation material,transitions between different failure modes and correlations between the load capacity and the varied parameters were observed.The results indicated that the inclination of the asperity had a significant impact on the failure mode.When the inclinationwas 30and greater,interlocking occurred between the dam and foundation and the governing failure modes were either rupture of the dam body or asperity.When the asperity inclination was significant enough to provide interlocking,the load capacity of the dam was impacted by the strength of the rock in the foundation through influencing the load capacity of the asperity.The location of the asperity along the concrete-rock interface did not affect the failure mode,except for when the asperity was located at the toe of the dam,but had an influence on the load capacity when the failure occurred by rupture of the buttress or by sliding.By accounting for a single large-scale asperity in the concrete-rock interface of the analysed dam,a horizontal load capacity increase of 30%e160%was obtained,depending on the inclination and location of the asperity and the strength of the foundation material.

3个李品种(系)芽需冷量的研究及休眠相关DAM基因的表达分析

【目的】探究3个李(Prunus)品种(系)的芽休眠和需冷量的差异及DAM基因表达与芽休眠的关系。【方法】调查统计了3个李品种(系)需冷量与萌芽率,采用生物信息学的方法对李的DAM基因进行鉴定,并用qRT-PCR对3个品种(系)李的DAM基因在芽的不同休眠阶段表达分析。【结果】7.2℃模型、0~7.2℃模型、犹他模型下“晚熟羌脆李”的需冷量均高于‘羌脆李’和‘脆红李’,且3个需冷量统计模型下‘羌脆李’和‘脆红李’的需冷量相同。鉴定了6个DAM基因(Pd DAM1、Pd DAM2、Pd DAM3、Pd DAM4、Pd DAM5、Pd DAM6),但花芽与叶芽内休眠期与内休眠解除期(需冷区间)高表达基因都为DAM5,且在休眠解除期DAM基因的相对表达量均呈下降趋势。【结论】揭示了3个李品种(系)的花芽与叶芽需冷量的差异,筛选出与休眠解除最相关的DAM基因,结果为李芽休眠及熟期调节提供理论依据。

葡萄休眠相关基因DAMs的克隆分析及对单氰胺的响应

DAM基因是真核生物转录因子之一,在木本果树的芽休眠中起着重要的调控作用,且在不同物种间数量不同。以‘水晶’葡萄为试材,于冬芽休眠期间采集枝条后均匀涂抹2.5%单氰胺,在处理后的不同时间采集冬芽,用于克隆VvDAMs基因序列,对其进行生物信息学和荧光定量分析,并测定冬芽激素含量。结果表明,克隆获得的VvDAM1、VvDAM2和VvDAM3基因的开放阅读框的长度分别为690、696、702 bp,分别编码229、231、233个氨基酸和1个终止密码子,相对分子量分别为25.96、26.76、25.99 kD,理论等电点分别为7.71、10.49、9.10;三者的二级结构形式均呈现α-螺旋>无规则卷曲>延伸链的规律;VvDAM1、VvDAM2、VvDAM3氨基酸序列上有一定的同一性,VvDAM1与欧洲李PsDAM1、VvDAM2与樱桃李PcDAM2、VvDAM3与李PsDAM3之间的同源性均达到98%以上;此外,冬芽休眠解除期间,VvDAM 1、VvDAM 2、VvDAM 3基因的表达量逐渐下降,IAA、GA3+4、ZR的含量和GA3+4/ABA逐渐上升,ABA含量和IAA/ZR逐渐下降,单氰胺处理后使其变化提前且幅度增大,从而使芽提前萌发,为葡萄冬芽破眠、早熟栽培等提供理论依据和实践意义。

Numerical investigation of hydro-morphodynamic characteristics of a cascading failure of landslide dams

A cascading failure of landslide dams caused by strong earthquakes or torrential rains in mountainous river valleys can pose great threats to people’s lives,properties,and infrastructures.In this study,based on the three-dimensional Reynoldsaveraged Navier-Stokes equations(RANS),the renormalization group(RNG)k-εturbulence model,suspended and bed load transport equations,and the instability discriminant formula of dam breach side slope,and the explicit finite volume method(FVM),a detailed numerical simulation model for calculating the hydro-morphodynamic characteristics of cascading dam breach process has been developed.The developed numerical model can simulate the breach hydrograph and the dam breach morphology evolution during the cascading failure process of landslide dams.A model test of the breaches of two cascading landslide dams has been used as the validation case.The comparison of the calculated and measured results indicates that the breach hydrograph and the breach morphology evolution process of the upstream and downstream dams are generally consistent with each other,and the relative errors of the key breaching parameters,i.e.,the peak breach flow and the time to peak of each dam,are less than±5%.Further,the comparison of the breach hydrographs of the upstream and downstream dams shows that there is an amplification effect of the breach flood on the cascading landslide dam failures.Three key parameters,i.e.,the distance between the upstream and the downstream dams,the river channel slope,and the downstream dam height,have been used to study the flood amplification effect.The parameter sensitivity analyses show that the peak breach flow at the downstream dam decreases with increasing distance between the upstream and the downstream dams,and the downstream dam height.Further,the peak breach flow at the downstream dam first increases and then decreases with steepening of the river channel slope.When the flood caused by the upstream dam failure flows to the downstream dam,it can produce a surge wave that overtops and erodes the dam crest,resulting in a lowering of the dam crest elevation.This has an impact on the failure occurrence time and the peak breach flow of the downstream dam.The influence of the surge wave on the downstream dam failure process is related to the volume of water that overtops the dam crest and the erosion characteristics of dam material.Moreover,the cascading failure case of the Xiaogangjian and Lower Xiaogangjian landslide dams has also been used as the representative case for validating the model.In comparisons of the calculated and measured breach hydrographs and final breach morphologies,the relative errors of the key dam breaching parameters are all within±10%,which verify the rationality of the model is applicable to real-world cases.Overall,the numerical model developed in this study can provide important technical support for the risk assessment and emergency treatment of failures of cascading landslide dams.

Numerical three-dimensional modeling of earthen dam piping failure

A physically-based numerical three-dimensional earthen dam piping failure model is developed for homogeneous and zoned soil dams.This model is an erosion model,coupled with force/moment equilibrium analyses.Orifice flow and two-dimensional(2D)shallow water equations(SWE)are solved to simulate dam break flows at different breaching stages.Erosion rates of different soils with different construction compaction efforts are calculated using corresponding erosion formulae.The dam's real shape,soil properties,and surrounding area are programmed.Large outer 2D-SWE grids are used to control upstream and downstream hydraulic conditions and control the boundary conditions of orifice flow,and inner 2D-SWE flow is used to scour soil and perform force/moment equilibrium analyses.This model is validated using the European Commission IMPACT(Investigation of Extreme Flood Processes and Uncertainty)Test#5 in Norway,Teton Dam failure in Idaho,USA,and Quail Creek Dike failure in Utah,USA.All calculated peak outflows are within 10%errors of observed values.Simulation results show that,for a V-shaped dam like Teton Dam,a piping breach location at the abutment tends to result in a smaller peak breach outflow than the piping breach location at the dam's center;and if Teton Dam had broken from its center for internal erosion,a peak outflow of 117851 m'/s,which is 81%larger than the peak outflow of 65120 m3/s released from its right abutment,would have been released from Teton Dam.A lower piping inlet elevation tends to cause a faster/earlier piping breach than a higher piping inlet elevation.

Sliding and damming properties of granular debris with different geometric configurations and grain size distributions

Granular debris plays a significant role in determining damming deposit characteristics. An indepth understanding of how variations in grain size distribution(GSD) and geometric configurations impact the behavior of granular debris during the occurrence of granular debris is essential for precise assessment and effective mitigation of landslide hazards in mountainous terrains. This research aims to investigate the impact of GSD and geometric configurations on sliding and damming properties through laboratory experiments. The geometric configurations were categorized into three categories based on the spatial distribution of maximum volume: located at the front(Type Ⅰ), middle(Type Ⅱ), and rear(Type Ⅲ) of the granular debris. Our experimental findings highlight that the sliding and damming processes primarily depend on the interaction among the geometric configuration, grain size, and GSD in granular debris. Different sliding and damming mechanisms across various geometric configurations induce variability in motion parameters and deposition patterns. For Type Ⅰ configurations, the front debris functions as the critical and primary driving component, with energy dissipation primarily occurring through inter-grain interactions. In contrast, Type Ⅱ configurations feature the middle debris as the dominant driving component, experiencing hindrance from the front debris and propulsion from the rear, leading to complex alterations in sliding motion. Here, energy dissipation arises from a combination of inter-grain and grain-substrate interactions. Lastly, in Type Ⅲ configurations, both the middle and rear debris serve as the main driving components, with the rear sliding debris impeded by the front. In this case, energy dissipation predominantly results from grainsubstrate interaction. Moreover, we have quantitatively demonstrated that the inverse grading in damming deposits, where coarse grain moves upward and fine grain moves downward, is primarily caused by grain sorting due to collisions among the grains and between the grain and the base. The impact of grain on the horizontal channel further aids grain sorting and contributes to inverse grading. The proposed classification of three geometric configurations in our study enhances the understanding of damming properties from the view of mechanism, which provides valuable insights for related study about damming granular debris.

Long-Term Performance and Microstructural Characterization of Dam Concrete in the Three Gorges Project

This study investigates the long-term performance of laboratory dam concrete in different curing environments over ten years and the microstructure of 17-year-old laboratory concrete and actual concrete cores drilled from the Three Gorges Dam.The mechanical properties of the laboratory dam concrete,whether cured in natural or standard environments,continued to improve over time.Furthermore,the laboratory dam concrete exhibited good resistance to diffusion and a refined microstructure after 17 years.However,curing and long-term exposure to the local natural environment reduced the frost resistance.Microstructural analyses of the laboratory concrete samples demonstrated that moderate-heat cement and fine fly ash(FA)particles were almost fully hydrated to form compact micro structures consisting of large quantities of homogeneous calcium(alumino)silicate hydrate(C-(A)-S-H)gels and a few crystals.No obvious interfacial transition zones were observed in the microstructure owing to the longterm pozzolanic reaction.This dense and homogenous microstructure was the crucial reason for the excellent long-term performance of the dam concrete.A high FA volume also played a significant role in the microstructural densification and performance growth of dam concrete at a later age.The concrete drilled from the dam surface exhibited a loose microstructure with higher microporosity,indicating that concrete directly exposed to the actual service environment suffered degradation caused by water and wind attacks.In this study,both macro-performance and microstructural analyses revealed that the application of moderate-heat cement and FA resulted in a dense and homogenous microstructure,which ensured the excellent long-term performance of concrete from the Three Gorges Dam after 17 years.Long-term exposure to an actual service environment may lead to microstructural degradation of the concrete surface.Therefore,the retained long-term dam concrete samples need to be further researched to better understand its microstructural evolution and development of its properties.

Health diagnosis of ultrahigh arch dam performance using heterogeneous spatial panel vector model

Currently,more than ten ultrahigh arch dams have been constructed or are being constructed in China.Safety control is essential to long-term operation of these dams.This study employed the flexibility coefficient and plastic complementary energy norm to assess the structural safety of arch dams.A comprehensive analysis was conducted,focusing on differences among conventional methods in characterizing the structural behavior of the Xiaowan arch dam in China.Subsequently,the spatiotemporal characteristics of the measured performance of the Xiaowan dam were explored,including periodicity,convergence,and time-effect characteristics.These findings revealed the governing mechanism of main factors.Furthermore,a heterogeneous spatial panel vector model was developed,considering both common factors and specific factors affecting the safety and performance of arch dams.This model aims to comprehensively illustrate spatial heterogeneity between the entire structure and local regions,introducing a specific effect quantity to characterize local deformation differences.Ultimately,the proposed model was applied to the Xiaowan arch dam,accurately quantifying the spatiotemporal heterogeneity of dam performance.Additionally,the spatiotemporal distri-bution characteristics of environmental load effects on different parts of the dam were reasonably interpreted.Validation of the model prediction enhances its credibility,leading to the formulation of health diagnosis criteria for future long-term operation of the Xiaowan dam.The findings not only enhance the predictive ability and timely control of ultrahigh arch dams'performance but also provide a crucial basis for assessing the effectiveness of engineering treatment measures.

Impacts of artificial dams on terrestrial water storage changes and the Earth's elastic load response during 1950-2016: A case study of medium and large reservoirs in Chinese mainland

The construction of dams for intercepting and storing water has altered surface water distributions, landsea water exchanges, and the load response of the solid Earth. The lack of accurate estimation of reservoir properties through the land surface and hydrological models can lead to water storage simulation and extraction errors. This impact is particularly evident in many artificial reservoirs in China. The study aims to comprehensively assess the spatiotemporal distribution and trends of water storage in medium and large reservoirs(MLRs) in Chinese mainland during 1950-2016, and to investigate the gravity,displacement, and strain effects induced by the reservoir mass concentration using the load elasticity theory. In addition, the impoundment contributions of MLRs to the relative sea level changes were assessed using a sea-level equation. The results show impoundment increases in the MLRs during1950-2016, particularly in the Yangtze River(Changjiang) and southern basins, causing significant elastic load effects in the surrounding areas of the reservoirs and increasing the relative sea level in China's offshore. However, long-term groundwater estimation trends are overestimated and underestimated in the Yangtze River and southwestern basins, respectively, due to the neglect of the MLRs impacts or the uncertainty of the hydrological model's output(e.g., soil moisture, etc.). The construction of MLRs may reduce the water mass input from land to the ocean, thus slowing global sea level rise. The results of the impact of human activities on the regional water cycle provide important references and data support for improving the integration of hydrological models, evaluating Earth's viscoelastic responses under longterm reservoir storage, enhancing in-situ and satellite geodetic measurements, and identifying the main factors driving sea level changes.

DAM中波发射机A/D转换板故障分析和处理

阐述数字幅度调制(Digital Amplitude Modulation,DAM)中波发射机模数(Analog to Digital,A/D)转换原理、A/D转换板主要组成部分及其作用,列举A/D转换板在实际运行中出现的常见故障案例,对常见故障给出分析和处理方法,为今后该板的故障分析和处理工作提供参考。

Granulometry Assessment of Lom Pangar Dam Sediments (East-Cameroon)

The Lom Pangar dam, the largest reservoir in Cameroon with a storage capacity of 6 km3 and a 30 MW hydropower plant, primarily regulates the hydrologic regime of the Sanaga River to maintain hydropower efficiency during dry seasons and enhance downstream hydropower plant performance. Understanding and managing sediments are crucial for the sustainability of dams, as indicated by numerous studies. This study assessed the granulometry of the sediments transported across the reservoir. For that purpose, 6 samples of fresh sediments were collected in the lacustrine and transitional sections of the reservoir using the standard method. Particles size was assessed using the laser diffusion technic after a 3 mm sieving. Various granulometric parameters were derived from the literature to analyze and characterize those sediments. Results show that silts are more than 70% of particles size and range between 2.19 - 60.26 µm. Size distribution also shows the same trend with D75 less than 51 µm. This is confirmed by the low values of Inman Skewness SkΦ (−0.168 to 0.303). The Sorting index S0 ranges from 0.31 to 0.53 µm, showing a very well-sorted sediments, aligning with low values of Krumbein index (0.906 - 1.683) that express the low heterometry of the particles. The consequence on the dam will be a quick clogging of the bottom of the reservoir. Their pH varies from 7.0 to 7.5. It also appears that the sandy fraction trend is higher in the right bank of the dam and reaches 22% on the right bank of Pangar River due to crystalline geology. Fraction greater than 3000 µm is negligible. The management of the dam has to keep attention to these results as siltation may close the safety outlet of the dam, damage turbines, and provoke recurrent technical and safety issues. Further, the clogging of the bottom of the reservoir may lead to an ecological problem with the limitation of hyporheic flow. Thus, water exchange with the underground water table and the natural purification of water reduce, while increasing sediments deposits change the biogeochemistry processes.

Erosion Rates in Dam Catchments in Jordan—Effects of Topography, Geology, and Urbanizations

Erosion as a natural process produces soils, which are very important natural resources for the fest land plant- and animal kingdoms. Loss of the soil cover reduces agricultural production, biodiversity, and the role of soil as a filter for infiltrating water to replenish the groundwater. It also threatens the food supplies. The knowledge of erosion rates of rocks and terrains is important for developing proactive measures to protect soils from erosion and loss. In this study, erosion rates of catchment areas were calculated based on dams’ catchment extensions and the sediment loads transported by flood flows into dams’ lakes. The study results show that the chemically, via floodwater, transported quantities of materials are negligible compared to the solid materials transported by the water. It calculates erosion rates ranging from 0.013 to 0.212 mm/yr (13 - 212 m/106 yr) for the different catchment areas. Erosion rates in Jordan are, generally, higher than those calculated for the different parts of the world ranging from 2.5 to 60 m/106 yr. This fact can be explained by the very steep topography, calcareous rock cover of the catchment areas and the barren rock exposures.

Economic significance and environmental impacts of the Song Dam Drinking Water Project(SDDWP)in Garhwal Himalaya

With the population growth through natural growth and migration,coupled with the city expansion,it is the fact that Dehradun City in India faces severe water scarcity.Therefore,the Song Dam Drinking Water Project(SDDWP)is proposed to provide ample drinking water to Dehradun City and its suburban areas.This paper examined economic significance and environmental impacts of the SDDWP in Garhwal Himalaya,India.To conduct this study,we collected data from both primary and secondary sources.There are 12 villages and 3 forest divisions in the surrounding areas of the proposed dam project,of which 3 villages will be fully submerged and 50 households will be affected.For this study,50 heads of the households were interviewed in the 3 submerged villages.The questions mainly focused on economic significance,environmental impacts,and rehabilitation issues of the dam project.The findings of this study indicate that economic significance of the dam project is substantial,including providing ample water for drinking and irrigation,contributing to groundwater recharge,creating job opportunities,and promoting the development of tourism and fisheries in the Doon Valley.In terms of the rehabilitation of the affected people,there are only 50 households in need of rehabilitation.Currently,the arable land of these affected people is not sufficient to sustain their livelihoods.The entire landscape is fragile,rugged,and precipitous;therefore,the affected people are willing to rehabilitate to more suitable areas in the Doon Valley.Moreover,it is essential to provide them with sufficient compensation packages including the compensation of arable land,houses,cash,common property resources,institutions,belongingness,and cultural adaptation.On the other hand,the proposed dam project will have adverse environmental impacts including arable land degradation,forest degradation,loss of fauna and flora,soil erosion,landslides,and soil siltation.These impacts will lead to the ecological imbalances in both upstream and downstream areas.This study suggests that the affected people should be given sufficient compensation packages in all respects.Afforestation programs can be launched in the degraded areas to compensate for the loss of forest in the affected areas.

Environmental and Human Impacts of Lancang-Mekong Mainstem and Tributary Dams on China, Laos, Thailand, Myanmar, Cambodia, and Vietnam

The Lancang-Mekong River in China, Laos, Thailand, Myanmar, Cambodia, and Vietnam is the soul and heart of mainland Southeast Asia. Over 60 million people depend on the river and its tributaries for food, transportation, water, and other necessities of life. The river supports one of the world’s most diverse fisheries, second only to Brazil’s Amazon River. Lancang-Mekong and tributaries are already heavily dammed primarily in China, Laos, Thailand, and Cambodia, with many more dams planned or under construction. Dams can worsen the impact of periodic droughts in the Lancang-Mekong basin and block the river’s “pulse effect” that spreads water and nutrients needed for fishing and farming onto the floodplains and delta. The headwaters of the Lancang are in China and its waters are considered a national resource. China regards the Lancang, Yangtze and Yellow rivers as a free resource rather than a shared resource. The primary difference between these rivers is the Lancang flows from China into and through other countries and not directly into a sea or ocean. China and Myanmar have not joined the Mekong River Commission (MRC) as full members but have been Dialogue Partners since 1996. Over the past thirty years, China’s Lancang policies and actions have reflected its national resource interests. China has actively engaged with individual transboundary countries at various levels including environmental, conservation, and economic agreements. The primary objective of this study is to assess the environmental and human impacts of all Lancang-Mekong mainstem and tributary dams and the plans by many countries for more hydropower utilizing the potential of the river as the continent’s energy lifeline. Future dams need to include fish ladders and navigation locks to reduce the environmental impacts on fish populations, natural resources, navigation, and livelihoods. Strengthening of international collaboration via the MRC or by individual or multiple country agreements to address Lancang-Mekong’s sustainable transboundary development goals is recommended. When new Lancang-Mekong and tributary dams are built within any of the transboundary watershed countries, additional communities will need to be resettled. Significant environmental and human impacts are observed. Steps will have to be taken by all the concerned countries to prevent these problems and to ensure that people’s livelihoods are restored after resettlement.

Comparative Study of Physico-Chemical and Biological Water Quality Upstream and Downstream of the Manantali Dam and Hydropower Plant from 2019 to 2023

The comparative study is designed to monitor the physico-chemical and biological quality of the water upstream and downstream of the Manantali hydroelectric dam. The physico-chemical parameters are sampled at 3 measuring points located at Station 1 of the dam’s reservoir, immediately downstream of the dam and hydroelectric power station at the level of the damping basin, and at the Bafing-Bakoye confluence at Bafoulabe (Bafing side), the biological parameter (ichthyological fauna) is characterized by ichthyological inventories of landings in the various fishing camps around the reservoir and at the Mahina market (Bafing side). The study assesses the environmental impact of hydroelectric structures and facilities on the physico-chemical and biological quality of the water. Physical parameters such as temperature, conductivity, pH, turbidity and chemical parameters such as dissolved oxygen, nitrite, nitrate, manganese, hydrogen sulfide, ammonium, iron, silica and phosphorus are measured in order to identify the various variations existing between the different measurement points. Analysis of the values obtained shows very high similarities between the various measuring points, and most parameters comply with WHO standards, with the exception of turbidity, manganese, hydrogen sulfide and iron. These data attest to good water quality, allowing normal development of flora and fauna with a low level of degradation. Comparative analysis of the ichthyological fauna shows the existence of 34 species of fish belonging to 11 families at the fishing camps around the Manantali dam reservoir, and 37 species belonging to 12 families at Mahina on the Bafing River. At Mahina on the Bafing, the specific composition of the catches is characterized by the presence of the Claroteidae family and four species (Alestes sp., Brycinus leuciscus, Auchenoglanis occidentalis, Distichodus engycephalus) not recorded at the camps. In contrast, all the fish families recorded in the camps are present in Mahina, and only one species (Hydrocynus brevis) is absent from the Mahina landings. The difference in species richness could be explained by the upwelling of some fish from the Bakoye to the Bafing at the confluence. The Shannon diversity index of 4.07 at Mahina is higher than the 2.98 recorded at camp level, and the equitability index of 0.78 at Mahina and 0.58 at the camp level indicate average diversity and the non-dominance of one species over the others. The diversification index values of 3.09 and 3.08 at camp level and Mahina respectively show that the number of theoretical habitats is three.

Tailings Dam Mining, Theoretical Considerations, and Circular Economy: A Review

Mining in tailings dams has emerged as a strategic alternative for mining companies for both economic and environmental reasons. Owing to technological limitations in recent decades, many of these dams have high metal contents, emphasizing the need to evaluate the quality of these residues, especially considering the technological advancements in current concentration plants. An economic viability analysis associated with reusing these materials is crucial. From an environmental point of view, improving mining techniques for dams by considering both safety and feasibility is an advantageous option in decommissioning processes and alignment in the circular economy. In this context, representing these tailings in terms of grade quality and granulometry, as well as the associated contaminants, is essential. Geostatistical estimation and simulation methods are valuable tools for modeling tailings bodies, but they require a reliable sampling campaign to ensure acceptably low errors. From an operational perspective, tailings recovery can be conducted via dry methods, such as mechanical excavation, or hydraulic methods, such as dredging or hydraulic blasting. Dredging is a commonly used method, and cutter suction dredgers, which require pumping to transport fragmented material, are the most commonly used tools. In this paper, some practical applications of geostatistical methods for resource quantification in tailings dams will be discussed. Additionally, the main mining methods for tailings recovery in dams will be presented. Emphasis will be given to the dredging method, along with the key analysis parameters for sizing dredgers, pumps, and pipelines.

ZF-10ADAM中波发射机功放故障原因分析与维修

DAM中波发射机是大、中功率中波发射台普遍使用的一种发射机。多年的维修实践表明,DAM中波发射机功放故障为多发故障,故障成因复杂,处理起来较为棘手。本文结合北广ZF-10A中波发射机维修案例,对功放故障的产生原因与维修进行探讨,希望能为中波发射台的技术人员提供借鉴。

Environmental Impact of Kakhovka Dam Breach and Chernobyl Nuclear Power Plant Explosion on Dnieper River Landscape

The Dnieper River headwaters are in Russia’s Valdai Hills and the river flows south to the Black Sea. The Dnieper River provides a waterway in which to transport goods to and from various European nations. In addition, the dams on the river provide hydro power. There are approximately 2260 km of Dnieper waterways in Russia, in Belarus, and within Ukraine. The Dnieper River has numerous urban centers including Smolensk in Russia, Mogilev in Belarus and Kiev and Zaporizhzhya in Ukraine. The worst nuclear accident in history unfolded, in the Dnieper River watershed, in northern Ukraine as a reactor at the Chernobyl nuclear power plant exploded and burned. After an accident, such as Chernobyl, radionuclide contaminated bodies of water via direct deposition from the air, discharge as effluent or indirectly from catchment basin washout. When radionuclides contaminate large bodies of water, they are quickly dispersing and accumulate in water bottom sediments, benthos, aquatic plants, and bottom feeding fish. The main pathways to humans are through contamination of drinking-water, from use of water for irrigation of food crops, and consumption of contaminated fish. Kakhovka Dam on the Dnieper River was destroyed during the Russian-Ukraine conflict and the dam needs to rebuild as soon as possible. Perhaps lessons learned by the US Army Corps of Engineers (USACE), after using TNT to blow up the Birds Point front line levee on the Mississippi River in May of 2011, can be applied to the man-induced 2023 Kakhovka Dam breach. The Birds Point man-induced levee breaches and subsequent flooding of farmland resulted in the loss of the 2011 crops and damaged the future soil productivity. The strong current and sweep of the water through the three man-induced levee breaches on the New Madrid floodway levee created deep gullies, displaced tons of soil, and damaged irrigation equipment, farms, and homes. The New Madrid floodway agricultural lands were restored, and the environmental damages were mitigated. The Kakhovka Dam destruction caused widespread flooding which affected settlements and farmland across the Dnieper watershed. The presence and breach-induced redistribution of Chernobyl-derived nuclides is an additional condition not present at the New Madrid man-induced levee breach. Four canal networks have become disconnected from the feeder reservoir. The canals were the source of drinking water for 700,000 people living in southern Ukraine. The Kakhovka canals also provided irrigation for vast areas of farmland. The water loss from the canals adversely affected food production in the region. The primary objectives of this paper are to assess lessons learned by the USACE and apply them in Ukraine to help restore and manage the Dnieper lifeline and watershed.