Optimization Design of the Multi-Layer Cross-Sectional Layout of An Umbilical Based on the GA-GLM

Marine umbilical is one of the key equipment for subsea oil and gas exploitation,which is usually integrated by a great number of different functional components with multi-layers.The layout of these components directly affects manufacturing,operation and storage performances of the umbilical.For the multi-layer cross-sectional layout design of the umbilical,a quantifiable multi-objective optimization model is established according to the operation and storage requirements.Considering the manufacturing factors,the multi-layering strategy based on contact point identification is introduced for a great number of functional components.Then,the GA-GLM global optimization algorithm is proposed combining the genetic algorithm and the generalized multiplier method,and the selection operator of the genetic algorithm is improved based on the steepest descent method.Genetic algorithm is used to find the optimal solution in the global space,which can converge from any initial layout to the feasible layout solution.The feasible layout solution is taken as the initial value of the generalized multiplier method for fast and accurate solution.Finally,taking umbilicals with a great number of components as examples,the results show that the cross-sectional performance of the umbilical obtained by optimization algorithm is better and the solution efficiency is higher.Meanwhile,the multi-layering strategy is effective and feasible.The design method proposed in this paper can quickly obtain the optimal multi-layer cross-sectional layout,which replaces the manual design,and provides useful reference and guidance for the umbilical industry.

Asymmetric expression of CA2 and CA13 linked to calcification in the bilateral mandibular condyles cause crossed beaks in chickens

Crossed beak is a complex mode of inheritance with prevalence ranging from 0.2 to 7.4% in at least 12 chicken strains worldwide.To reveal the intrinsic factors causing crossed beaks,genes expression patterns in bilateral mandibular condyle between affected and normal birds were characterized by RNA sequencing analysis in the present studies.Crossed beak was induced by short length of unilateral mandibular ramus,and a total of 110differentially expressed genes were up-or down-regulated in the affected(short)mandibular condyle side as compared to the normal side.Carbonic anhydrase 2(CA2)and Carbonic anhydrase 13(CA13)were enriched in the carbonate dehydratase activity,and high-expressed in mandibular condyle and osteoblasts(P<0.05).However,both were low-expressed in short mandibular condyle side of affected birds(P<0.05).The carbonate dehydratase inhibitor experiments confirmed that there is positive association between the calcification and carbonic anhydrase isoenzymes.Quantitative analysis with cetylpyridinium chloride showed a decrease in calcification when the cells were transfected with an anti-CA13 shRNA.Our research suggested that CA2 and CA13 are down-calcified in shortside mandibular condyle,and caused mandibular ramus to grow slowly.CA2 and CA13 have the critical role in crossed beaks by regulating calcification of mandibular condyle.

Atomic transport dynamics in crossed optical dipole trap

We study the dynamical evolution of cold atoms in crossed optical dipole trap theoretically and experimentally. The atomic transport process is accompanied by two competitive kinds of physical mechanics, atomic loading and atomic loss.The loading process normally is negligible in the evaporative cooling experiment on the ground, while it is significant in preparation of ultra-cold atoms in the space station. Normally, the atomic loading process is much weaker than the atomic loss process, and the atomic number in the central region of the trap decreases monotonically, as reported in previous research. However, when the atomic loading process is comparable to the atomic loss process, the atomic number in the central region of the trap will initially increase to a maximum value and then slowly decrease, and we have observed the phenomenon first. The increase of atomic number in the central region of the trap shows the presence of the loading process, and this will be significant especially under microgravity conditions. We build a theoretical model to analyze the competitive relationship, which coincides with the experimental results well. Furthermore, we have also given the predicted evolutionary behaviors under different conditions. This research provides a solid foundation for further understanding of the atomic transport process in traps. The analysis of loading process is of significant importance for preparation of ultra-cold atoms in a crossed optical dipole trap under microgravity conditions.

Crossed renal ectopia with rectal cancer:A case report

BACKGROUND Crossed renal ectopia(CRE)occurs when one kidney crosses the midline from the primary side to the contralateral side while the ureter remains on the primary side.Rectal cancer,one of the most common malignant tumors of the digestive tract,refers to cancer from the dentate line to the rectosigmoid junction.The concurrent presentation of CRE alongside rectal cancer is an uncommon clinical observation.CASE SUMMARY Herein,we report a 69-year-old male patient with rectal cancer who was diagnosed with CRE via computed tomography during hospitalization.Following thorough preoperative evaluations,the patient underwent Dixon surgery.CONCLUSION We performed laparoscopic radical resection of rectal cancer and adequate lymph node removal in a patient with CRE with no postoperative discomfort.

L-R Crossed积的Maschke定理(英文)

本文给出了L-R crossed积的Maschke定理,推广了Blattner和Montgomery给出的crossed积的Maschke定理.

Crossed modules of Lie color algebras

The linear operations of the equivalent classes of crossed modules of Lie color algebras are studied. The set of the equivalent classes of crossed modules is proved to be a vector space, which is isomorphic with the homogeneous components of degree zero of the third cohomology group of Lie color algebras. As an application of this theory, the crossed modules of Witt type Lie color algebras is described, and the result is proved that there is only one equivalent class of the crossed modules of Witt type Lie color algebras when the abelian group Г is equal to Г＋. Finally, for a Witt type Lie color algebra, the classification of its crossed modules is obtained by the isomorphism between the third cohomology group and the crossed modules.

High Resolution Crossed Molecular Beams Study on the F＋HD→HF＋D Reaction at Collision Energy of 8.19-18.98 kJ/mol

The crossed beams scattering dynamics of the F＋HD→HF＋D reaction have been studied at collision energies ranging from 8.19 k J/tool to 18.98 k J/tool using the high resolution H-atom Rydberg tagging time-of-flight method. Product rotational state-resolved differential cross sections have been measured. Most of the DF products are backward scattered at low collision energies and then gradually shift to the sideway as the collision energy increases. In addition to the backward and sideway scatterings, we have also observed the DF（v＇=4） product in the forward direction for the first time for this reaction. The forward scattering DF（v=4） product also increases with the collision energy. Angular and collision energy dependence of the product energy disposals in different degrees of freedom have been determined. Collision energy dependence of the vibrational branching ratios has also been examined. Possible dynamical origins of the forward scattering DF（v＇=4） products were discussed.

keep one's fingers crossed

keep one s fingers crossed 的字面意思是将手指交叉起来,通常是用中指压住食指,也有人习惯于食指压住中指。这个短语的比喻意义是 to hope that nothing will happento upset one s plans,即“希望一切如愿”“但愿别出差错”。如:He is keeping his fingers crossed that itwon t rain on Sunday when he wants to playfootball.他想星期天去踢球。

Equivalence of crossed product of linear categories and generalized Maschke theorem

Some sufficient and necessary conditions are given for the equivalence between two crossed product actions of Hopf algebra H on the same linear category, and the Maschke theorem is generalized. Based on the result of the crossed product in the classic Hopf algebra theory, first, let A be a k-linear category and H be a Hopf algebra, and the two crossed products A#_σH and A#＇_σH are isomorphic under some conditions. Then, let A#_σH be a crossed product category for a finite dimensional and semisimple Hopf algebra H. If V is a left A#σH-module and WC V is a submodule such that W has a complement as a left A-module, then W has a complement as a A#_σH-module.

Geometry Design and Tooth Contact Analysis of Crossed Beveloid Gears for Marine Transmissions

Beveloid gears,also known as conical gears,gain more and more importance in industry practice due to their abilities for power transmission between parallel,intersected and crossed axis.However,this type of gearing with crossed axes has no common plane of action which results in a point contact and low tooth durability.Therefore,a geometry design approach assuming line contact is developed to analyze the tooth engagement process of crossed beveloid gears with small shaft angle for marine transmission applications.The loaded gear tooth contact behavior is simulated by applying a quasi-static analysis to study the effects of gearing parameters on mesh characteristics.Using the proposed method,a series of sensitivity analyses to examine the effects of critical gearing parameters such as shaft angle,cone angle,helix angle and profile-shift coefficient on the theoretical gear mesh is performed.The parametric analysis of pitch cone design shows that the dominant design parameters represented by the angle between the first principle directions（FPD） and normal angular factor are more sensitive to the shaft and cone angles than they are to the helix angle.The theoretical contact path is highly sensitive to the profile-shift coefficient,which is determined from the theoretical tooth contact analysis.The FPD angle is found to change the distribution of contact pattern,contact pressure and root stress as well as the translational transmission error and the variation of the mesh stiffness significantly.The contact pattern is clearly different between the drive and coast sides due to different designed FPD angles.Finally,a practical experimental setup for marine transmission is performed and tooth bearing test is conducted to demonstrate the proposed design procedure.The experimental result compared well with the simulation.Results of this study yield a better understanding of the geometry design and loaded gear mesh characteristics for crossed beveloid gears used in marine transmission.

Partial crossed模

首先引入了partial crossed模的概念并给出例子,证明了实际上它是一种特殊的partial Doi-Hopf模.

Tunneling between double wells of atom in crossed electromagnetic fields

The tunneling between double wells of atom in crossed electromagnetic fields is investigated by a one-dimensional Hamiltonian model. The crossed fields induced outer well is apart from the nuclear origin and it is very difficult to access by means of spectroscopy but it will be possible if there exists the tunneling of the electron between the outer well and the Coulomb potential predominated well at the nuclear origin. A one-dimensional quantum calculation with B-spline basis has been performed for hydrogen atom in crossed fields accessible in our laboratory, at B = 0.8 T and F = -220 V.cm^-1. The calculation shows that the wavefunctions of some excited states close to the Stark saddle point in the outer well extend over to the Coulomb potential well, making it possible to penetrate the quantum information of the outer well. However, the tunneling rate is very small and the spectral measurement of the transitions from the ground state should be of a high resolution and high sensitivity.

CROSSED PRODUCTS BY FINITE GROUP ACTIONS WITH CERTAIN TRACIAL ROKHLIN PROPERTY

We introduce a special tracial Rokhlin property for unital C~＊-algebras. Let A be a unital tracial rank zero C~＊-algebra（or tracial rank no more than one C~＊-algebra）. Suppose that α ： G → Aut（A） is an action of a finite group G on A, which has this special tracial Rokhlin property, and suppose that A is a α-simple C~＊-algebra. Then, the crossed product C~＊-algebra C~＊（G, A, α） has tracia rank zero（or has tracial rank no more than one）. In fact,we get a more general results.

Crossed Beams Study on the Dynamics of CI Atom Reaction with Silane

The dynamics of the Cl＋SiH4 reaction has been studied using the universal crossed molecular beam method. Angular resolved time-of-flight spectra have been measured for the channel SiH3Cl＋H. Product angular distributions as well as energy distributions in the center-ofmass frame were determined for the channel. Experimental results show that the SiH3Cl product is mainly backward scattered relative to the Cl atom beam direction, suggesting that the channel takes place via a typical SN2 type reaction mechanism.

Crossed Beams Study on the Dynamics of F Atom Reaction with 1,2-Butadiene

We have investigated the dynamics of the F＋C4H6 reaction using the universal crossed molecular beam method. The C4H5F＋H reaction channel was observed in this experiment. Angular resolved time-of-flight spectra have been measured for the C4H5F product. Prod- uct angular distributions as well as kinetic energy distributions were determined for this product channel. Experimental results show that the C4H5F product is largely backward scattered with considerable forward scattering signal, relative to the F atom beam direction. This suggests that the reaction channel mainly proceeds via a long-lived complex formation mechanism, with possible contribution from a direct SN2 type mechanism.

High Resolution Crossed Molecular Beams Study on the F＋HD→HF＋D Reaction at Collision Energy of 5.43-18.73 kJ/mol

The dynamics of F＋HD→HF＋D reaction has been studied at ten collision energies ranging from 5.43 kJ/mol to 18.73 kJ/mol using high-resolution H/D atom Rydberg tagging time-of-flight method. Product vibrational and rotational state-resolved differential cross sections have been determined. The intensity of the HF（v1=2） forward products decreases as the collision energy increases, suggesting that the resonance contribution is reduced as the collision energy increases. The forward peak of HF（vl=3） product has also been observed above the threshold of this product channel. Product energy disposals in different degrees of freedom have been analyzed. The collision energy dependence of the HF vibrational product branching was also determined. This work presents a comprehensive dynamic picture of this resonance mediated reaction in a wide collision energy regime, providing a good test ground for theoretical understandings of this interesting reaction at higher collision energies.

Crossed Molecular Beam Study of H＋CH4 and H＋CD4 Reactions： Vibrationally Excited CH3/CD3 Product Channels

We study the H＋CH4/CD4-＋H2/HD＋CH3/CD3 reactions using the time sliced velocity map ion imaging technique. Ion images of the CH3/CD3 products were measured by the （2＋1） resonance enhanced multi-photon ionization （REMPI） detection method. Besides the CH3/CD3 products in the ground state, ion images of the vibrationally excited CH3/CD3 products were also observed at two collision energies of 0.72 and 1.06 eV. It is shown that the angular distribution of the products CH3/CD3 in vibrationally excited states gradually vary from backward scattering to sideways scattering as the collision energy increases. Compared to the CH3/CD3 products in the ground state, the CH3/CD3 products in vibrationally excited states tend to be more sideways scattered, indicating that larger impact parameters play a more important role in the vibrationally excited product channels.

Negative differential resistance behaviour in N-doped crossed graphene nanoribbons

By using first-principles calculations and nonequilibrium Green＇s function technique, we study elastic transport properties of crossed graphene nanoribbons. The results show that the electronic transport properties of molecular junctions can be modulated by doped atoms. Negative differential resistance （NDR） behaviour can be observed in a certain bias region, when crossed graphene nanoribbons are doped with nitrogen atoms at the shoulder, but it cannot be observed for pristine crossed graphene nanoribbons at low biases. A mechanism for the negative differential resistance behaviour is suggested.

Contact Characteristics of Conical Involute Gears with Crossed Axes

Based on the theory of gearing and the gear generating mechanism, this study investigates the contact characteristics of conical involute gear pairs with crossed axes. The meshing model with a reference rack as intermedium is established and tooth contact analysis （TCA） is performed to examine the meshing and bearing contact of the conical involute gear pairs composed of a pinion and a gear. Using the contact line of reference rack tooth surface, the path of contact is confirmed, and the calculation formula of principal direction, relative curvature, path of contact and ellipse of contact are derived. Finally, numerical examples are provided to demonstrate computational results and test gears are made for tooth-bearing tests. The conclusion verifies that the theory is applicable.

Crossed intergrowth triggered TS-2 microsphere:Formation mechanism,modification and catalytic performance

TS-2 microspheres,consisting of intergrown primary nanocrystals,was prepared by controlling the synthetic parameters.The effects of the amount of quaternary ammonium cations as structure-directing agent,H2O/Si ratio,the presence of alcohol and the temperature were carefully investigated on the crystallization process.The high alkalinity was proved to be highly important for the preservation of the microsphere morphology initially formed,due to the unique intergrown stacking style.An alkali treatment with the aqueous solution of structure-directing agent,organic amine and ammonium salt and subsequent Na+ion-exchange were performed to enhance the catalytic activity of TS-2 microsphere in the cyclohexanone ammoximation reactions,with both the conversion and selectivity higher than 99%.In the continuous reaction,the TS-2 microspheres exhibited to be durable catalyst with potential application in industrial ammoximation processes.