Untethered Micro/Nanorobots for Remote Sensing:Toward Intelligent Platform

Untethered micro/nanorobots that can wirelessly control their motion and deformation state have gained enormous interest in remote sensing applications due to their unique motion characteristics in various media and diverse functionalities.Researchers are developing micro/nanorobots as innovative tools to improve sensing performance and miniaturize sensing systems,enabling in situ detection of substances that traditional sensing methods struggle to achieve.Over the past decade of development,significant research progress has been made in designing sensing strategies based on micro/nanorobots,employing various coordinated control and sensing approaches.This review summarizes the latest developments on micro/nanorobots for remote sensing applications by utilizing the self-generated signals of the robots,robot behavior,microrobotic manipulation,and robot-environment interactions.Providing recent studies and relevant applications in remote sensing,we also discuss the challenges and future perspectives facing micro/nanorobots-based intelligent sensing platforms to achieve sensing in complex environments,translating lab research achievements into widespread real applications.

Design and Production of a Device for Remote Control by GSM of the Operating Parameters of a Biodigester

This article describes the design and creation of a remote monitoring and control system based on GSM(Global System for Mobile)communications technology for monitoring the key parameters of a biodigester.Biodigesters are widely used for the conversion of organic materials into biogas,thereby contributing to renewable energy production and organic waste management.However,real-time monitoring and regulation of parameters such as temperature,humidity,product gas level,pH are essential to ensure the efficiency and safety of the digestion process.We created the device for remote control of the operating parameters of the biodigester using an Arduino card,a DHT11 sensor,a pH sensor,a GSM module and a 2×16 LCD(Liquide-Crystal-Display)display.A biodigester(4.5 L plastic container)and accessories were used.The experimental device created made it possible to remotely monitor the evolution of the temperature,humidity,the gas produced as well as the pH in the digester loaded with cow dung,for 45 days.Examination of the real-time evolution of the parameters measured by the device produced showed the same results as those carried out locally by the usual instruments,with a correlation coefficient of around 98%.During this digestion period,the temperature provided by the sensor varied from 25°C to 37°C(mesophilic mode)and the humidity levels varied from 70%to 95%.The results obtained show the reliability of the device produced.This research represents a significant advance in the management of biodigestion facilities.It offers a powerful tool to maximize biogas production,reduce maintenance costs,minimize environmental impact and contribute to the transition to cleaner,renewable energy.

Remote Control of Unitary Air Conditioner Based on Manufacturing Message Specification

Traditional air conditioner used to be in local control mode. However, with the development of modern information technology, the control of air conditioner will have to support many more functions. As a first step in such a development, we have implemented a remote monitoring system of unitary air conditioners, using the manufacturing message specification (MMS). MMS is an OSI application protocol designed for the remote control and monitoring of real devices. The functions supported are those that an operator would do normally at the console of the unitary air conditioner. Due to the accomplishment of UMCS (Unitary air conditioner MMS Control System), there will be a leap of the application of MMS and the control technology of unitary air conditioner.

A remote control training system for rat navigation in complicated environment

A remote control system has been developed to deliver stimuli into the rat brain through a wireless micro-stimulator for animal behavior training. The system consists of the following main components： an integrated PC control program, a transmitter and a receiver based on Bluetooth （BT） modules, a stimulator controlled by C8051 microprocessor, as well as an operant chamber and an eight-arm radial maze. The micro-stimulator is featured with its changeable amplitude of pulse output for both constant-voltage and constant-current mode, which provides an easy way to set the proper suitable stimulation intensity for different training. The system has been used in behavior experiments for monitoring and recording bar-pressing in the operant chamber, controlling rat roaming in the eight-arm maze, as well as navigating rats through a 3D obstacle route. The results indicated that the system worked stably and that the stimulation was effective for different types of rat behavior controls. In addition, the results showed that stimulation in the whisker barrel region of rat primary somatosensory cortex （SI） acted like a cue. The animals can be trained to take different desired turns upon the association between the SI cue stimulation and the reward stimulation in the medial forehrain bundle （MFB）.

Error analysis for remote nonlinear iterative learning control system with wireless channel noise

In this paper, the iterative learning control problem is considered for a class of remote control system over wireless network communication channel. The control performance of remote iterative learning control （R-ILC） system is analyzed and an error boundary of the stable output of the R-ILC system is obtained for the boundary stochastic noise channel. Finally, we obtain some rules to reduce the fluctuation caused by wireless channel noise through the analysis results for fluctuation boundary. The simulation results prove the proposed rule is correct.

Modelling and Remote Control of an Excavator

This paper presents the results of an on-going project and investigates modelling and remote control issues of an industry excavator. The details of modelling, communication, and control of a remotely controllable excavator are studied. The paper mainly focuses on trajectory tracking control of the excavator base and robust control of the excavator arm. These will provide the fundamental base for our next research step. In addition, extensive simulation results for trajectory tracking of the excavator base and robust control of the excavator arm are given. Finally, conclusions and further work have been identified.

Controlled remote preparation of an arbitrary four-qubit cluster-type state

Two schemes are proposed to realize the controlled remote preparation of an arbitrary four-qubit cluster-type state via a partially entangled channel. We construct ingenious measurement bases at the sender’s and the controller’s locations, which play a decisive role in the proposed schemes. The success probabilities can reach 50% and 100%, respectively. Compared with the previous proposals, the success probabilities are independent of the coefficients of the entangled channel.

Controlled Cyclic Remote State Preparation of Arbitrary Qubit States

Quantum secure communications could securely transmit quantum information by using quantum resource.Recently,novel applications such as bidirectional and asymmetric quantum protocols have been developed.In this paper,we propose a new method for generating entanglement which is highly useful for multiparty quantum communications such as teleportation and Remote State Preparation(RSP).As one of its applications,we propose a new type of quantum secure communications,i.e.cyclic RSP protocols.Starting from a four-party controlled cyclic RSP protocol of one-qubit states,we show that this cyclic protocol can be generalized to a multiparty controlled cyclic RSP protocol for preparation of arbitrary qubit states.We point out that previous bidirectional and asymmetric protocols can be regarded as a simpler form of our cyclic RSP protocols.

Research on Remote Monitoring and Fault Diagnosis Technology of Numerical Control Machine

Based on the internet technology,it has become possible to complete remote monitoring and fault diagnosis for the numerical control machine.In order to capture the micro-shock signal induced by the incipient fault on the rotating parts,the reso- nance demodulation technology is utilized in the system.As a subsystem of the remote monitoring system,the embedded data acquisi- tion instrument not only integrates the demodulation board but also complete the collection and preprocess of monitoring data from different machines.Furthermore,through connecting to the internet,the data can be transferred to the remote diagnosis center and data reading and writing function can be finished in the database.At the same time,the problem of the IP address floating in the dial-up of web server is solved by the dynamic DNS technology.Finally,the remote diagnosis software developed on the Lab VIEW platform can analyze the monitoring data from manufacturing field.The research results have indicated that the equipment status can be monitored by the system effectively.

Remote Control and Telemetry System for Large-scale Model Test at Sea

Physical testing of large-scale ship models at sea is a new experimental method.It is a cheap and reliable way to research the environment adaptability of a ship in complex and extreme wave conditions.It is necessary to have a stable experimental system for the test.Since the experimental area is large, a remote control system and a telemetry system are essential, and were designed by the authors.An experiment was conducted on the Songhuajiang River to test the systems.The relationship between the model's speed and its electromotor's revolutions was also measured during the model test.The results showed that the two systems make it possible to carry out large-scale model tests at sea.

Development of a Remotely Controlled Testing Platform with Low-drag Air-ventilated Hull

This paper addresses the development and testing of a remotely controlled boat platform with an innovative air-ventilated hull. The application of air cavities on the underside of ship hulls is a promising means for reducing hydrodynamic drag and pollutant emissions and increasing marine transportation efficiency. Despite this concept＇s potential, design optimization and high-performance operation of novel air-cavity ships remain a challenging problem. Hull construction and sensor instrumentation of the model-scale air-cavity boat is described in the paper. The modular structure of the hull allows for easy modifications, and an electric propulsion unit enables self-propelled operation. The boat is controlled remotely via a radio transmission system. Results of initial tests are reported, including thrust, speed, and airflow rate in several loading conditions. The constructed platform can be used for optimizing air-cavity systems and testing other innovative hull designs. This system can be also developed into a high-performance unmanned boat.

Controlled remote implementation of quantum operations with high-dimensional systems

We present two protocols for the controlled remote implementation of quantum operations between three-party high-dimensional systems. Firstly, the controlled teleportation of an arbitrary unitary operation by bidirectional quantum state teleportaion （BQST） with high-dimensional systems is considered. Then, instead of using the BQST method, a protocol for controlled remote implementation of partially unknown operations belonging to some restricted sets in high-dimensional systems is proposed. It is shown that, in these protocols, if and only if the controller would like to help the sender with the remote operations, the controlled remote implementation of quantum operations for high-dimensional systems can be completed.

Advance of Study on Design Methods of Hydraulic System of Radio Remote Control of Construction Machinery

The working principle of radio remote controlling of construction machinery should be that signals of the radio wave from the transmitter obtained in the receiver were controlled and then changed into electronic analog or digital signals which can be used to drive different actuators and mechanisms of the vehicle.The vehicle could be acted by following the controlling instructions sent by the operator.The best operation mode of construction machinery is suitable not only to manual operating but also to remote controlling in the same vehicle.The design methods of the hydraulic system used for the radio remote controlling of construction machinery are discussed.The design methods of hydraulic circuits for the actuators controlled by solenoid on-off type valves,hydro-electronic multi-way proportional valves,closed loop proportional servo driver or three-way proportional reducing valves are discussed in detail (with real example).The design methods of the power shift transmission of electro-hydraulic controlling,the devices of braking and the directional streering are discussed in this paper.

A Multi-Interface Remote Monitoring and Control System Architecture Based on Embedded Server

This paper presents a multi-interface embedded server architecture for remote real-time monitoring system and distributed monitoring applications. In the scheme,an embedded microprocessor( LPC3250 from NXP) is chosen as the CPU of the embedded server with a linux operation system( OS) environment. The embedded server provides multiple interfaces for supporting various application scenarios. The whole network is based on local area network and adopts the Browser / Server( B / S) model. The monitoring and control node is as a browser endpoint and the remote node with an embedded server is as a server endpoint. Users can easily acquire various sensors information through writing Internet protocol address of remote node on the computer browser. Compared with client / server( C / S) mode,B / S model needs less maintain and can be applicable to large user group. In addition,a simple network management protocol( SNMP) is used for management of devices in Internet protocol( IP) networks. The results of the demonstration experiment show that the proposed system gives good support to manage the network from different user terminals and allows the users to better interact with the ambient environment.

Remote Control System of 37 mm Double Tube Antiaircraft Gun for Hunan Weather Modification

Hunan Weather Modification Center and Suizhou Dafang Precision Electromechanical Engineering Co.,Ltd. of Hubei commonly transformed and installed 83 double tube antiaircraft guns( 37 mm) of Hunan Province in order to realize remote control of computer. After transformation,loading capacity of ammunition feeding machine became large,which could shorten the time of filling shells in the case of short airspace time;one shell launch volume was more,which could improve hail suppression effect; the degree of automation was greatly improved,which could save manpower by more than 50%. It fully embodied the modernization level of Hunan weather modification operation.

Enhancement of Stabilization Control in Remote Robot System with Force Feedback

In this paper, we deal with a remote robot system in which a user can operate an industrial robot with a force sensor at a remote location by using a haptic interface device. We apply a method using the wave filter together with the phase control filter which was previously proposed by the authors to the remote robot system for stabilization control. We also propose a method to enhance the haptic quality. By experiment, we demonstrate the effectiveness of the proposed method. We compare the proposed method with the conventional method quantitatively and clarify which domains the proposed method is applied to more effectively.

The Design and Implementation of Qt-based Cross-platform Video Conferencing Remote Control

In order to overcome the defects of the dedicated video conference remote control, this paper designs and implements a Qt-based cross-platform video conferencing remote control. The remote control not only implements a full range of video conferencing control functions with an easy-to-use visual interface;but also implement cross-platform feature to allow users to use remote control software on their own equipment. It is economic, convenient and stylish for users. This paper mainly describes the design and implementation of remote control system framework and cross-platform features. Finally, the result in the paper shows: This remote control is reliable and easy to use.

Design of Remote Control Nuclear Radiation Detector

For the issue of nuclear radiation detection,this paper designs a remote control nuclear radiation detector which can trace a pre-determined route,avoid obstacles effectively,and can be controlled remotely by users wirelessly or through voice command.It can effectively replace manual probing due to convenience,flexibility and safety.The system mainly consists of a nuclear detection module,a voice control module,a route tracing module,an obstacle avoidance module,a data transmission module,storage and a display module,and a D.C.machine.An MSP430 microcontroller is used as a control chip to control the motor and the system uses infrared technology and ultrasonic sensors to achieve intelligent tracing and obstacle avoidance.Moreover,it applies a voice module and data transmission module to remotely controlling the device.The radiation data is shown on an LCD screen.

Controlled Remote State Preparation

We present a scheme for remotely preparing a state via the controls of many agents in a network.In thescheme,the agents' controls are achieved by utilizing quantum key distribution.Generally,the original state can berestored by the receiver with probability 1/2 if all the agents collaborate.However,for certain type of original states therestoration probability is unit.

Characteristics of mining gas channel expansion in the remote overlying strata and its control of gas flow

The technology of pressure relief gas drainage is one of the most effective and economic for preventing gas emissions in underground mines.Based on current understanding of strata breakage and fracture development in overlying strata,the current study divides the overlying strata into the following three longitudinal zones in terms of the state of gas flow:a turbulent channel zone,a transitional circulation channel zone and a seepage channel zone.According to the key strata discrimination theory of controlling the overlying strata,the calculation method establishes that the step-type expansion of the mining gas channel corresponds to the advancing distance of working face,and this research also confrms the expanding rule that the mining gas channel in overlying strata follows the advancing distance of mining working face.Based on the geological conditions of Xinjing Coal Mine of Yangquan,this paper researches the expanding rule of mining gas channel as well as the control action of the channel acting on the pressure relief flow under the condition of the remote protective layer,and got the distance using inversion that the step-type expanding of mining gas channel is corresponding to the advancing distance of working face,which verifes the accuracy and feasibility of theoretical calculation method proposed in this study.The research provides the theoretical basis for choosing the technology of pressure relief gas drainage and designing the parameters of construction.