Study on Environmental Multi-parameter Sensor Based on MEMS

A new membrane type Al_2O_3 micromachining material is used.We develop an environmental multi-parameter detection micro-system,which implements the detection to temperature,humidity,wind speed,and CO.The test results illustrate that the heat-release unit in micro-system intercross greatly affects other sensing units on the temperature.We study the method of etching process,which formed cavity to reduce the heat exchange efficiency and decrease temperature intercross effect.

THE BOUNDEDNESS OF OPERATORS ON WEIGHTED MULTI-PARAMETER LOCAL HARDY SPACES

Though atomic decomposition is a very useful tool for studying the boundedness on Hardy spaces for some sublinear operators,untill now,the boundedness of operators on weighted Hardy spaces in a multi-parameter setting has been established only by almost orthogonality estimates.In this paper,we mainly establish the boundedness on weighted multi-parameter local Hardy spaces via atomic decomposition.

Force and impulse multi-sensor based on flexible gate dielectric field effect transistor

Nowadays,force sensors play an important role in industrial production,electronic information,medical health,and many other fields.Two-dimensional material-based filed effect transistor(2D-FET)sensors are competitive with nano-level size,lower power consumption,and accurate response.However,few of them has the capability of impulse detection which is a path function,expressing the cumulative effect of the force on the particle over a period of time.Herein we fabricated the flexible polymethyl methacrylate(PMMA)gate dielectric MoS_(2)-FET for force and impulse sensor application.We systematically investigated the responses of the sensor to constant force and varying forces,and achieved the conversion factors of the drain current signals(I_(ds))to the detected impulse(I).The applied force was detected and recorded by I_(ds)with a low power consumption of~30 nW.The sensitivity of the device can reach~8000%and the 4×1 sensor array is able to detect and locate the normal force applied on it.Moreover,there was almost no performance loss for the device as left in the air for two months.

Bioinspired Passive Tactile Sensors Enabled by Reversible Polarization of Conjugated Polymers

Tactile perception plays a vital role for the human body and is also highly desired for smart prosthesis and advanced robots.Compared to active sensing devices,passive piezoelectric and triboelectric tactile sensors consume less power,but lack the capability to resolve static stimuli.Here,we address this issue by utilizing the unique polarization chemistry of conjugated polymers for the first time and propose a new type of bioinspired,passive,and bio-friendly tactile sensors for resolving both static and dynamic stimuli.Specifically,to emulate the polarization process of natural sensory cells,conjugated polymers(including poly(3,4-ethylenedioxythiophen e):poly(styrenesulfonate),polyaniline,or polypyrrole)are controllably polarized into two opposite states to create artificial potential differences.The controllable and reversible polarization process of the conjugated polymers is fully in situ characterized.Then,a micro-structured ionic electrolyte is employed to imitate the natural ion channels and to encode external touch stimulations into the variation in potential difference outputs.Compared with the currently existing tactile sensing devices,the developed tactile sensors feature distinct characteristics including fully organic composition,high sensitivity(up to 773 mV N^(−1)),ultralow power consumption(nW),as well as superior bio-friendliness.As demonstrations,both single point tactile perception(surface texture perception and material property perception)and two-dimensional tactile recognitions(shape or profile perception)with high accuracy are successfully realized using self-defined machine learning algorithms.This tactile sensing concept innovation based on the polarization chemistry of conjugated polymers opens up a new path to create robotic tactile sensors and prosthetic electronic skins.

A Smart Graded-index Multimode Fiber Based Sensor Unit for Multi-parameter Sensing Applications

We demonstrate a smart optical fiber sensor unit to realize a multi-parameter sensing, including temperature, curvature and strain or displacement. The sensor unit is composed of a Bragg grating in graded-index multimode fiber and a Fizeau cavity.

Multi-parameter real-time monitoring scheme for power transmission lines based on FBG sensors

A multi-parameter real-time monitoring scheme for power transmission line is proposed and experimentally demonstrated.The Fiber Bragg Grating(FBG)sensors are used to sensing the information of temperature and strain in the power transmission lines system,and a monitoring center based on client–server model is established to process and display the sensing information.Several FBG-based power transmission line temperature sensors interrogated based on the developed multi-parameter real-time monitoring scheme is experimentally investigated.The result shows that the system is very useful.

Comprehensive early warning of rock burst utilizing microseismic multi-parameter indices

Rock bursts have become one of the most severe risks in underground coal mining and its early warning is an important component in the safety management. Microseismic(MS) monitoring is considered potentially as a powerful tool for the early warning of rock burst. In this study, an MS multi-parameter index system was established and the critical values of each index were estimated based on the normalized multi-information warning model of coal-rock dynamic failure. This index system includes bursting strain energy(BSE) index, time-space-magnitude independent information(TSMII) indices and timespace-magnitude compound information(TSMCI) indices. On the basis of this multi-parameter index system, a comprehensive analysis was conducted via introducing the R-value scoring method to calculate the weights of each index. To calibrate the multi-parameter index system and the associated comprehensive analysis, the weights of each index were first confirmed using historical MS data occurred in LW402102 of Hujiahe Coal Mine(China) over a period of four months. This calibrated comprehensive analysis of MS multi-parameter index system was then applied to pre-warn the occurrence of a subsequent rock burst incident in LW 402103. The results demonstrate that this multi-parameter index system combined with the comprehensive analysis are capable of quantitatively pre-warning rock burst risk.

Multi-parameter gene expression profiling of peripheral blood for early detection of hepatocellular carcinoma

AIM In our previous study, we have built a nine-gene(GPC3, HGF, ANXA1, FOS, SPAG9, HSPA1 B, CXCR4, PFN1, and CALR) expression detection system based on the Ge XP system. Based on peripheral blood and Ge XP, we aimed to analyze the results of genes expression by different multi-parameter analysis methods and build a diagnostic model to classify hepatocellular carcinoma(HCC) patients and healthy people.METHODS Logistic regression analysis, discriminant analysis, classification tree analysis, and artificial neural network were used for the multi-parameter gene expression analysis method. One hundred and three patients with early HCC and 54 age-matched healthy normal controls were used to build a diagnostic model. Fiftytwo patients with early HCC and 34 healthy people were used for validation. The area under the curve, sensitivity, and specificity were used as diagnostic indicators.RESULTS Artificial neural network of the total nine genes had the best diagnostic value, and the AUC, sensitivity, and specificity were 0.943, 98%, and 85%, respectively. At last, 52 HCC patients and 34 healthy normal controls were used for validation. The sensitivity and specificity were 96% and 86%, respectively.CONCLUSION Multi-parameter analysis methods may increase the diagnostic value compared to single factor analysis and they may be a trend of the clinical diagnosis in the future.

Highly maneuvering target tracking using multi-parameter fusion Singer model

An algorithm of highly maneuvering target tracking is proposed to solve the problem of large tracking error caused by strong maneuver. In this algorithm, a new estimator, named as multi-parameter fusion Singer (MF-Singer) model is derived based on the Singer model and the fuzzy reasoning method by using radial acceleration and velocity of the target, and applied to the problem of maneuvering target tracking in strong maneuvering environment and operating environment. The tracking performance of the MF-Singer model is evaluated and compared with other manuevering tracking models. It is shown that the MF-Singer model outperforms these algorithms in several examples.

Multi-parameters of Thermal Infrared Remote Sensing Anomalies of the Earthquake

Temporal and spatial anomalies associated with the Yushu earthquake, including the Outgoing Longwave Radiation( OLR), the Land Surface Temperature( LST) and surface temperature from the National Center for Environmental Prediction( NCEP) are studied using thermal infrared remote sensing data in this paper. All results confirmed the previous observations of thermal anomalies in the seismic region prior to this earthquake.Among the multi-parameter anomalies, the underground water temperature anomaly appeared first and lasted for the longest time; OLR anomaly,an infrared parameter which indicates the radiation characteristics of the land surface medium,was the first to be detected; LST anomalies appeared later than OLR. NCEP temperature indicates the average atmosphere temperature with a certain vertical thickness; therefore,it was the last detected anomaly. The anomalies of OLR and LST lasted for a similar time length and were all located in the south or southwest of the epicenter.

Design and Realization of Signal Processing Platform of Multi-Parameter Wearable Medical Devices

This paper presents a design of new type of multi-parameter wearable medical devices signal processing platform. The signal processing algorithm has a QRS-wave detection algorithm based on LADT, wavelet transformation and threshold detection with TMS320VC5509 DSP system. The DSP can greatly increase the speed of QRS-wave detection, and the results can be practical used for multi-parameter wearable device detection of abnormal ECG.

Existence and joint continuity of local time of multi-parameter fractional Lévy processes

In this paper, we introduce the definition of a multi-parameter fractional Lévy process and its local time, and show its decomposition. Using the decomposition, we prove existence and joint continuity of its local time.

Case Retrieval Method of Multi-parameter for Customized Product

The CBR (Case-Based Reasoning) usually is been used to accomplish customized products by variant design or reusable design.In the CBR,retrieve is very important.A simple case retrieval method is been brought forward to retrieve a opti- mal prototype based on using inputted multi-parameters,it can be programmed easily.An example has been proved this method can find optimal prototype for new design task efficiently.

Fabrication Techniques and Sensing Mechanisms of Textile‑Based Strain Sensors:From Spatial 1D and 2D Perspectives

The intelligent textile sensors based on fiber(1D)and fabric(2D)are the ideal candidates for wearable devices.Their flexible weaving and unique structure endow them with flexibility,lightweight,good air permeability,and feasible integration with garments.In view of the spring-up of novel textile-based strain sensors,the novel materials and fabrication approaches were elaborated from spatial perspectives,i.e.,1D fibers/yarn and 2D fabric.The intrinsic sensing mechanism is the primary fac-tor affecting sensor sensitivity,and the variation trend of the sensing signal is closely related to it.Although existing studies have involved various sensing mechanisms,there is still lacking systematic classification and discussion.Hence,the sensing mechanisms of textile-based sensors were elaborated from spatial perspectives.Considering that strain sensors were mostly based on resistance variation,the sensing mechanisms of resistive textile-based strain sensors were mainly focused,mainly including fiber deformation,tunneling effect,crack propagation,fabric deformation,electrical contact and bridge connec-tion.Meanwhile,the corresponding resistance prediction models,usually used as important data fitting methodology,were also comprehensively discussed,which can reproduce the resistance trend and provide guidance for the sensor performance.Finally,the multifunctionality of textile-based strain sensors was summarized,namely multi-mode signal detection,visual interaction,energy collection,thermal management and medical treatment were discussed.It was expected to provide research insights into the multifunctional integration of textile sensors.

MULTI-PARAMETER ACCELERATED MODIFIED NEWTON-RAPHSON METHODS FOR RIGIDPLASTIC FE ANALYSIS

Applications of certain multi-parameter acceleration techniques used with themodified New-ton-Raphson (mN-R) methods to solve the nonlinear equations arising from rigid-plasticfinite element analysis are investigated. New modified multi-parameter techniques, developed fromCrisfield's multi-parameter methods, are utilized to solve these nonlinear equations. The numericalperformance of these techniques is compared with the standard Newton-Raphson method (sN-R),Crisfield's single parameter method (C1), Crisfield's two parameter method (C2) and Crisfield'sthree parameter method (C3). The new techniques do not involve additional residual force calculationand require little extra computational effort. In addition, they are more robust and efficient thanother existing acceleration techniques.

Metal Oxide Nanocrystals Multi-Parametric Gas Sensors

Interest in nanowires of semiconducting oxides is exponentially grown in the last years,due to their attracting potential applications in electronic,optical and sensor field.We have focused our attention on the sensing properties of indium and zinc oxide nanostructures.We have studied the influence of the deposition conditions on the nanostructures morphology and sensing properties.We report on the growth of ZnO and In_2O_3 nanostructures on silicon and alumina substrates,using vapour phase technique.We have synthesized,depending on the growth conditions,different structures such as nano-wires, tetrapod,nano-comb,nano-necklace,nano-pencil ZnO/In_2O_3 without using any metal catalyst.

Collaborative positioning for swarms:A brief survey of vision,LiDAR and wireless sensors based methods

As positioning sensors,edge computation power,and communication technologies continue to develop,a moving agent can now sense its surroundings and communicate with other agents.By receiving spatial information from both its environment and other agents,an agent can use various methods and sensor types to localize itself.With its high flexibility and robustness,collaborative positioning has become a widely used method in both military and civilian applications.This paper introduces the basic fundamental concepts and applications of collaborative positioning,and reviews recent progress in the field based on camera,LiDAR(Light Detection and Ranging),wireless sensor,and their integration.The paper compares the current methods with respect to their sensor type,summarizes their main paradigms,and analyzes their evaluation experiments.Finally,the paper discusses the main challenges and open issues that require further research.

Multi-Parameter Influence Analysis of Interaction Between Internal Solitary Wave and Fixed Submerged Body

To obtain the interaction characteristics between Internal solitary waves(ISWs)and submerged bodies,a three-dimensional numerical model for simulating ISWs was established in the present study based on the RANS equation.The velocity entrance method was adopted to generate the ISWs.First,the reliability of this numerical model was validated by comparing it with theoretical and literature results.Then,the influence of environmental and navigation parameters on interactions between ISWs and a fixed SUBOFF-submerged body was studied.According to research,the hydrodynamic performance of the submerged body has been significantly impacted by the ISWs when the body is nearing the central region of the wave.Besides,the pitching moment(y')will predominate when the body encounters the ISWs at a certain angle between 0°and 180°,and the lateral force is larger than the horizontal force.Additionally,the magnitude of the force acting on the body is mostly affected by the wave amplitude.The variation of the vertical force is the main way that ISWs affect the hydrodynamic performance of the bodies.The investigations and findings discussed above can serve as a guide to forecast how ISWs will interact with submerged bodies.

THE MULTI-PARAMETER INVERSION OF ELASTIC WAVE IN HALF-SPACE

The multi-parameter inverse scattering problem of elastic waveequation with single fre- quency is investigated within Bornapproximation. By use of a wideband measuring scheme in which bothtransmitters and receivers scan over the half-space surface, theformula of the scattering field of elastic wave is derived. Fourtypes of mode conversion of elastic wave(P→P, P→S, S→P, S→S)areseparated from the scattering field. These components containsufficient information for usto recon- struct the configuration ofthe density and Lame parameters of the medium.

Non-relativistic scattering amplitude for a new multi-parameter exponential-type potential

In this paper, we study the scattering properties of s-wave Schrdinger equation for the multi-parameter potential,which can be reduced into four special cases for different values of potential parameters, i.e., Hulthn, Manning–Rosen,and Eckart potentials. We also obtain and investigate the scattering amplitudes of these special cases. Some numerical results are also obtained and reported.