Multi-parameters of Thermal Infrared Remote Sensing Anomalies of the Earthquake

Temporal and spatial anomalies associated with the Yushu earthquake, including the Outgoing Longwave Radiation( OLR), the Land Surface Temperature( LST) and surface temperature from the National Center for Environmental Prediction( NCEP) are studied using thermal infrared remote sensing data in this paper. All results confirmed the previous observations of thermal anomalies in the seismic region prior to this earthquake.Among the multi-parameter anomalies, the underground water temperature anomaly appeared first and lasted for the longest time; OLR anomaly,an infrared parameter which indicates the radiation characteristics of the land surface medium,was the first to be detected; LST anomalies appeared later than OLR. NCEP temperature indicates the average atmosphere temperature with a certain vertical thickness; therefore,it was the last detected anomaly. The anomalies of OLR and LST lasted for a similar time length and were all located in the south or southwest of the epicenter.

A Log-Penalty-Based Method for Multi-Parameters Estimation with Partly Calibrated COLD Array

In this paper,we focus on the problem of joint estimation of DOA,power and polarization angle from sparse reconstruction perspective with array gain-phase errors,where a partly calibrated cocentered orthogonal loop and dipole(COLD)array is utilized.In detailed implementations,we first combine the output of loop and dipole in second-order statistics domain to receive the source signals completely,and then we use continuous multiplication operator to achieve gain-phase errors calibration.After compensating the gain-phase errors,we construct a log-penalty-based optimization problem to approximate`0 norm and further exploit difference of convex(DC)functions decomposition to achieve DOA.With the aid of the estimated DOAs,the power and polarization angle estimation are obtained by the least squares(LS)method.By conducting numerical simulations,we show the effectiveness and superiorities of the proposed method.

THE BOUNDEDNESS OF OPERATORS ON WEIGHTED MULTI-PARAMETER LOCAL HARDY SPACES

Though atomic decomposition is a very useful tool for studying the boundedness on Hardy spaces for some sublinear operators,untill now,the boundedness of operators on weighted Hardy spaces in a multi-parameter setting has been established only by almost orthogonality estimates.In this paper,we mainly establish the boundedness on weighted multi-parameter local Hardy spaces via atomic decomposition.

The quantitative evaluation of application of hyperspectral data based on multi-parameters joint optimization

In order to evaluate the mineral identification of the hyperspectral data and make a trade-off of the imaging system parameters,a quantitative evaluation approach based on the multi-parameters joint optimization is proposed for the hyperspectral remote sensing.In the proposed approach,the mineral identification is defined as the number of the minerals identified and the key imaging parameters employed include ground sample distance(GSD)and spectral resolution(SR).Certain limitations are found among parameters that are used for analyzing the imaging processes.The constraints include the industrial manufacturing level,application requirements and the quantitative relationship among the GSD,the SR and the signal-to-noise ratio(SNR).Regression analysis is used to investigate the quantitative relationship between the mineral identification and the key imaging system parameters.Then,an optimization model for the trade-off study is established by combining the regression equation with the constraints.The airborne hyperspectral image collected by Hymap is applied to evaluate the performance of the proposed approach.The experimental results reveal that the approach can achieve the evaluation of the mineral identification and the trade-off of key imaging system parameters.The error of the prediction is within one kind of mineral.

Multi-Parameter Influence Analysis of Interaction Between Internal Solitary Wave and Fixed Submerged Body

To obtain the interaction characteristics between Internal solitary waves(ISWs)and submerged bodies,a three-dimensional numerical model for simulating ISWs was established in the present study based on the RANS equation.The velocity entrance method was adopted to generate the ISWs.First,the reliability of this numerical model was validated by comparing it with theoretical and literature results.Then,the influence of environmental and navigation parameters on interactions between ISWs and a fixed SUBOFF-submerged body was studied.According to research,the hydrodynamic performance of the submerged body has been significantly impacted by the ISWs when the body is nearing the central region of the wave.Besides,the pitching moment(y')will predominate when the body encounters the ISWs at a certain angle between 0°and 180°,and the lateral force is larger than the horizontal force.Additionally,the magnitude of the force acting on the body is mostly affected by the wave amplitude.The variation of the vertical force is the main way that ISWs affect the hydrodynamic performance of the bodies.The investigations and findings discussed above can serve as a guide to forecast how ISWs will interact with submerged bodies.

Feedback control and quantum error correction assisted quantum multi-parameter estimation

Quantum metrology provides a fundamental limit on the precision of multi-parameter estimation,called the Heisenberg limit,which has been achieved in noiseless quantum systems.However,for systems subject to noises,it is hard to achieve this limit since noises are inclined to destroy quantum coherence and entanglement.In this paper,a combined control scheme with feedback and quantum error correction(QEC)is proposed to achieve the Heisenberg limit in the presence of spontaneous emission,where the feedback control is used to protect a stabilizer code space containing an optimal probe state and an additional control is applied to eliminate the measurement incompatibility among three parameters.Although an ancilla system is necessary for the preparation of the optimal probe state,our scheme does not require the ancilla system to be noiseless.In addition,the control scheme in this paper has a low-dimensional code space.For the three components of a magnetic field,it can achieve the highest estimation precision with only a 2-dimensional code space,while at least a4-dimensional code space is required in the common optimal error correction protocols.

Study on Quantitative Precipitation Estimation by Polarimetric Radar Using Deep Learning

Accurate radar quantitative precipitation estimation(QPE)plays an essential role in disaster prevention and mitigation.In this paper,two deep learning-based QPE networks including a single-parameter network and a multi-parameter network are designed.Meanwhile,a self-defined loss function(SLF)is proposed during modeling.The dataset includes Shijiazhuang S-band dual polarimetric radar(CINRAD/SAD)data and rain gauge data within the radar’s 100-km detection range during the flood season of 2021 in North China.Considering that the specific propagation phase shift(KDP)has a roughly linear relationship with the precipitation intensity,KDP is set to 0.5°km^(-1 )as a threshold value to divide all the rain data(AR)into a heavy rain(HR)and light rain(LR)dataset.Subsequently,12 deep learning-based QPE models are trained according to the input radar parameters,the precipitation datasets,and whether an SLF was adopted,respectively.The results suggest that the effects of QPE after distinguishing rainfall intensity are better than those without distinguishing,and the effects of using SLF are better than those that used MSE as a loss function.A Z-R relationship and a ZH-KDP-R synthesis method are compared with deep learning-based QPE.The mean relative errors(MRE)of AR models using SLF are improved by 61.90%,51.21%,and 56.34%compared with the Z-R relational method,and by 38.63%,42.55%,and 47.49%compared with the synthesis method.Finally,the models are further evaluated in three precipitation processes,which manifest that the deep learning-based models have significant advantages over the traditional empirical formula methods.

Holevo bound independent of weight matrices for estimating two parameters of a qubit

Holevo bound plays an important role in quantum metrology as it sets the ultimate limit for multi-parameter estimations,which can be asymptotically achieved.Except for some trivial cases,the Holevo bound is implicitly defined and formulated with the help of weight matrices.Here we report the first instance of an intrinsic Holevo bound,namely,without any reference to weight matrices,in a nontrivial case.Specifically,we prove that the Holevo bound for estimating two parameters of a qubit is equivalent to the joint constraint imposed by two quantum Cramér–Rao bounds corresponding to symmetric and right logarithmic derivatives.This weightless form of Holevo bound enables us to determine the precise range of independent entries of the mean-square error matrix,i.e.,two variances and one covariance that quantify the precisions of the estimation,as illustrated by different estimation models.Our result sheds some new light on the relations between the Holevo bound and quantum Cramer–Rao bounds.Possible generalizations are discussed.

Enhancing quantum metrology for multiple frequencies of oscillating magnetic fields by quantum control

Quantum multi-parameter estimation has recently attracted increased attention due to its wide applications, with a primary goal of designing high-precision measurement schemes for unknown parameters. While existing research has predominantly concentrated on time-independent Hamiltonians, little has been known about quantum multi-parameter estimation for time-dependent Hamiltonians due to the complexity of quantum dynamics. This work bridges the gap by investigating the precision limit of multi-parameter quantum estimation for a qubit in an oscillating magnetic field model with multiple unknown frequencies. As the well-known quantum Cramer–Rao bound is generally unattainable due to the potential incompatibility between the optimal measurements for different parameters, we use the most informative bound instead which is always attainable and equivalent to the Holevo bound in the asymptotic limit. Moreover, we apply additional Hamiltonian to the system to engineer the dynamics of the qubit. By utilizing the quasi-Newton method, we explore the optimal schemes to attain the highest precision for the unknown frequencies of the magnetic field, including the simultaneous optimization of initial state preparation, the control Hamiltonian and the final measurement. The results indicate that the optimization can yield much higher precisions for the field frequencies than those without the optimizations. Finally,we study the robustness of the optimal control scheme with respect to the fluctuation of the interested frequencies, and the optimized scheme exhibits superior robustness to the scenario without any optimization.

Comprehensive early warning of rock burst utilizing microseismic multi-parameter indices

Rock bursts have become one of the most severe risks in underground coal mining and its early warning is an important component in the safety management. Microseismic(MS) monitoring is considered potentially as a powerful tool for the early warning of rock burst. In this study, an MS multi-parameter index system was established and the critical values of each index were estimated based on the normalized multi-information warning model of coal-rock dynamic failure. This index system includes bursting strain energy(BSE) index, time-space-magnitude independent information(TSMII) indices and timespace-magnitude compound information(TSMCI) indices. On the basis of this multi-parameter index system, a comprehensive analysis was conducted via introducing the R-value scoring method to calculate the weights of each index. To calibrate the multi-parameter index system and the associated comprehensive analysis, the weights of each index were first confirmed using historical MS data occurred in LW402102 of Hujiahe Coal Mine(China) over a period of four months. This calibrated comprehensive analysis of MS multi-parameter index system was then applied to pre-warn the occurrence of a subsequent rock burst incident in LW 402103. The results demonstrate that this multi-parameter index system combined with the comprehensive analysis are capable of quantitatively pre-warning rock burst risk.

Multi-parameter gene expression profiling of peripheral blood for early detection of hepatocellular carcinoma

AIM In our previous study, we have built a nine-gene(GPC3, HGF, ANXA1, FOS, SPAG9, HSPA1 B, CXCR4, PFN1, and CALR) expression detection system based on the Ge XP system. Based on peripheral blood and Ge XP, we aimed to analyze the results of genes expression by different multi-parameter analysis methods and build a diagnostic model to classify hepatocellular carcinoma(HCC) patients and healthy people.METHODS Logistic regression analysis, discriminant analysis, classification tree analysis, and artificial neural network were used for the multi-parameter gene expression analysis method. One hundred and three patients with early HCC and 54 age-matched healthy normal controls were used to build a diagnostic model. Fiftytwo patients with early HCC and 34 healthy people were used for validation. The area under the curve, sensitivity, and specificity were used as diagnostic indicators.RESULTS Artificial neural network of the total nine genes had the best diagnostic value, and the AUC, sensitivity, and specificity were 0.943, 98%, and 85%, respectively. At last, 52 HCC patients and 34 healthy normal controls were used for validation. The sensitivity and specificity were 96% and 86%, respectively.CONCLUSION Multi-parameter analysis methods may increase the diagnostic value compared to single factor analysis and they may be a trend of the clinical diagnosis in the future.

Highly maneuvering target tracking using multi-parameter fusion Singer model

An algorithm of highly maneuvering target tracking is proposed to solve the problem of large tracking error caused by strong maneuver. In this algorithm, a new estimator, named as multi-parameter fusion Singer (MF-Singer) model is derived based on the Singer model and the fuzzy reasoning method by using radial acceleration and velocity of the target, and applied to the problem of maneuvering target tracking in strong maneuvering environment and operating environment. The tracking performance of the MF-Singer model is evaluated and compared with other manuevering tracking models. It is shown that the MF-Singer model outperforms these algorithms in several examples.

Study on Environmental Multi-parameter Sensor Based on MEMS

A new membrane type Al_2O_3 micromachining material is used.We develop an environmental multi-parameter detection micro-system,which implements the detection to temperature,humidity,wind speed,and CO.The test results illustrate that the heat-release unit in micro-system intercross greatly affects other sensing units on the temperature.We study the method of etching process,which formed cavity to reduce the heat exchange efficiency and decrease temperature intercross effect.

Design and Realization of Signal Processing Platform of Multi-Parameter Wearable Medical Devices

This paper presents a design of new type of multi-parameter wearable medical devices signal processing platform. The signal processing algorithm has a QRS-wave detection algorithm based on LADT, wavelet transformation and threshold detection with TMS320VC5509 DSP system. The DSP can greatly increase the speed of QRS-wave detection, and the results can be practical used for multi-parameter wearable device detection of abnormal ECG.

Case Retrieval Method of Multi-parameter for Customized Product

The CBR (Case-Based Reasoning) usually is been used to accomplish customized products by variant design or reusable design.In the CBR,retrieve is very important.A simple case retrieval method is been brought forward to retrieve a opti- mal prototype based on using inputted multi-parameters,it can be programmed easily.An example has been proved this method can find optimal prototype for new design task efficiently.

Existence and joint continuity of local time of multi-parameter fractional Lévy processes

In this paper, we introduce the definition of a multi-parameter fractional Lévy process and its local time, and show its decomposition. Using the decomposition, we prove existence and joint continuity of its local time.

Non-relativistic scattering amplitude for a new multi-parameter exponential-type potential

In this paper, we study the scattering properties of s-wave Schrdinger equation for the multi-parameter potential,which can be reduced into four special cases for different values of potential parameters, i.e., Hulthn, Manning–Rosen,and Eckart potentials. We also obtain and investigate the scattering amplitudes of these special cases. Some numerical results are also obtained and reported.

MULTI-PARAMETER ACCELERATED MODIFIED NEWTON-RAPHSON METHODS FOR RIGIDPLASTIC FE ANALYSIS

Applications of certain multi-parameter acceleration techniques used with themodified New-ton-Raphson (mN-R) methods to solve the nonlinear equations arising from rigid-plasticfinite element analysis are investigated. New modified multi-parameter techniques, developed fromCrisfield's multi-parameter methods, are utilized to solve these nonlinear equations. The numericalperformance of these techniques is compared with the standard Newton-Raphson method (sN-R),Crisfield's single parameter method (C1), Crisfield's two parameter method (C2) and Crisfield'sthree parameter method (C3). The new techniques do not involve additional residual force calculationand require little extra computational effort. In addition, they are more robust and efficient thanother existing acceleration techniques.

Elastic direct envelope inversion based on wave mode decomposition for multi-parameter reconstruction of strong-scattering media

The parameter reconstruction of strong-scattering media is a challenge for conventional full waveform inversion(FWI).Direct envelope inversion(DEI)is an effective method for large-scale and strongscattering structures imaging without the need of low-frequency seismic data.However,the current DEI methods are all based on the acoustic approximation.Whereas,in real cases,seismic records are the combined effects of the subsurface multi-parameters.Therefore,the study of DEI in elastic media is necessary for the accurate inversion of strong-scattering structures,such as salt domes.In this paper,we propose an elastic direct envelope inversion(EDEI)method based on wave mode decomposition.We define the objective function of EDEI using multi-component seismic data and derive its gradient formulation.To reduce the coupling effects of multi-parameters,we introduce the wave mode decomposition method into the gradient calculation of EDEI.The update of Vp is primarily the contributions of decomposed P-waves.Two approaches on Vs gradient calculation are proposed,i.e.using the petrophysical relation and wave mode decomposition method.Finally,we test the proposed method on a layered salt model and the SEG/EAGE salt model.The results show that the proposed EDEI method can reconstruct reliable large-scale Vp and Vs models of strong-scattering salt structures.The successive elastic FWI can obtain high-precision inversion results of the strong-scattering salt model.The proposed method also has a good anti-noise performance in the moderate noise level.

THE MULTI-PARAMETER INVERSION OF ELASTIC WAVE IN HALF-SPACE

The multi-parameter inverse scattering problem of elastic waveequation with single fre- quency is investigated within Bornapproximation. By use of a wideband measuring scheme in which bothtransmitters and receivers scan over the half-space surface, theformula of the scattering field of elastic wave is derived. Fourtypes of mode conversion of elastic wave(P→P, P→S, S→P, S→S)areseparated from the scattering field. These components containsufficient information for usto recon- struct the configuration ofthe density and Lame parameters of the medium.