Concurrent multipath transfer（CMT） using stream control transmission protocol（SCTP） multihoming has become an appealing option to increase the throughput and improve the performance of increasingly bandwidth-hungr...Concurrent multipath transfer（CMT） using stream control transmission protocol（SCTP） multihoming has become an appealing option to increase the throughput and improve the performance of increasingly bandwidth-hungry applications.To investigate the rate allocation for applications in CMT,this paper analyzes the capacities of paths shared by competing sources,then proposes the rate allocation model for elastic flows based on the framework of network utility maximization（NUM）.In order to obtain the global optimum of the model,a distributed algorithm is presented which depends only on local available information.Simulation results confirm that the proposed algorithm can achieve the global optimum within reasonable convergence times.展开更多
In the network for data transmission using CMT,there are multiple paths to choose,and the time delay of each path is not the same,there is a certain issue packet out-of-order.This article studied and analyzed the pack...In the network for data transmission using CMT,there are multiple paths to choose,and the time delay of each path is not the same,there is a certain issue packet out-of-order.This article studied and analyzed the packet transmission in the sender,for each path assigned specific packet sequence number,in order to reduce the random sequence problem,improve the efficiency of network transmission.In the network for data transmission using CMT,there are multiple paths to choose,and the time delay of each path is not the same,there is a certain issue packet out-of-order.This article studied and analyzed the packet transmission in the sender,for each path assigned specific packet sequence number,in order to reduce the random sequence problem,improve the efficiency of network transmission.展开更多
This paper presents a treatment of the entanglement transfer between atoms in two distant cavities coupled by an optical fibre. If the atoms resonantly and collectively interact with the local single-mode cavity field...This paper presents a treatment of the entanglement transfer between atoms in two distant cavities coupled by an optical fibre. If the atoms resonantly and collectively interact with the local single-mode cavity fields and the dipole-dipole interaction between the atoms is neglected, then it shows that a complete transfer of entanglement from one pair of atoms to another can be deterministically realized. Furthermore, it also investigates the effects of dipole-dipole interaction on entanglement transfer on the condition that the interaction between the atoms and the cavity is much weaker than the coupling between the cavity and the fibre.展开更多
A system consisting of two different atoms interacting with a two-mode vacuum, where each atom is resonant only with one cavity mode, is considered. The effects of dipole-dipole （dd） interaction between two atoms on...A system consisting of two different atoms interacting with a two-mode vacuum, where each atom is resonant only with one cavity mode, is considered. The effects of dipole-dipole （dd） interaction between two atoms on the atom-atom entanglement and mode--mode entanglement are investigated. For a weak dd interaction, when the atoms are initially separable, the entanglement between them can be induced by the dd interaction, and the entanglement transfer between the atoms and the modes occurs efficiently; when the atoms are initially entangled, the entanglement transfer is almost not influenced by the dd interaction. However, for a strong dd interaction, it is difficult to transfer the entanglement from the atoms to the modes, but the atom-atom entanglement can be maintained when the atoms are initially entangled.展开更多
The high precision assemblies with considerable radial interference should be accompanied by heating and cooling processes.However,the mechanical properties of metals are greatly affected by thermal operations.So,for ...The high precision assemblies with considerable radial interference should be accompanied by heating and cooling processes.However,the mechanical properties of metals are greatly affected by thermal operations.So,for evaluating the stress distribution and distortion of teeth profiles in a gear/shaft assembly,a transient thermal analysis is necessary for finding the change in mechanical properties.The friction on the contact surface is another important parameter in interaction of the gear with the shaft.Evaluating the gear stress and deformation fields for several modes of heat transfer and friction coefficients showed that the maximum radial or tangential stresses on contact surface of the joint may have more than 8%increase by increasing friction coefficient;while the intensity of heat transfer at cooling stage has lower effect on stress distribution.展开更多
Entanglement transfer is investigated in a dimerized Heisenberg system. Concurrence as the measure of entanglement is calculated by the time-evolved state starting from an initially entangled state of spin pair. It is...Entanglement transfer is investigated in a dimerized Heisenberg system. Concurrence as the measure of entanglement is calculated by the time-evolved state starting from an initially entangled state of spin pair. It is shown that perfect entanglement transfer can be realized at some special time and suitable interacting.展开更多
In this paper we propose a COncurrent Production Engineering System （COPES） for the flexible transfer line （FTL） layout design in a restricted area. COPES first determines the buffer size in front of the bay of ea...In this paper we propose a COncurrent Production Engineering System （COPES） for the flexible transfer line （FTL） layout design in a restricted area. COPES first determines the buffer size in front of the bay of each machine tool in the FTL and then initializes a computer aided design （CAD） system to draw the FTL in a restricted area. We develop a set of modules systems which have been integrated into a single framework, in accordance with the practice of concurrent engineering. Concurrent engineering involves the cooperation of these activities. It＇s expected that the developed COPES can improve the cooperation between production engineers＇ and the plant designer. This can be done by enabling the production engineers＇ to make better decision regarding FTL buffer size.展开更多
基金supported by the National Natural Science Foundation of China (60833002)the National Basic Research Program of China (973 Program) (2007CB307100)+2 种基金the National High Technology Research and Development Program of China (863 Program) (2007AA01Z202)the Program for Changjiang Scholars and Innovative Research Team in University (IRT0707)the Program of Introducing Talents of Discipline to Universities (111 Project) (B08002)
文摘Concurrent multipath transfer（CMT） using stream control transmission protocol（SCTP） multihoming has become an appealing option to increase the throughput and improve the performance of increasingly bandwidth-hungry applications.To investigate the rate allocation for applications in CMT,this paper analyzes the capacities of paths shared by competing sources,then proposes the rate allocation model for elastic flows based on the framework of network utility maximization（NUM）.In order to obtain the global optimum of the model,a distributed algorithm is presented which depends only on local available information.Simulation results confirm that the proposed algorithm can achieve the global optimum within reasonable convergence times.
文摘In the network for data transmission using CMT,there are multiple paths to choose,and the time delay of each path is not the same,there is a certain issue packet out-of-order.This article studied and analyzed the packet transmission in the sender,for each path assigned specific packet sequence number,in order to reduce the random sequence problem,improve the efficiency of network transmission.In the network for data transmission using CMT,there are multiple paths to choose,and the time delay of each path is not the same,there is a certain issue packet out-of-order.This article studied and analyzed the packet transmission in the sender,for each path assigned specific packet sequence number,in order to reduce the random sequence problem,improve the efficiency of network transmission.
基金Project supported by the National Natural Science Foundation of China (Grant No 10374025)the Natural Science Foundation of Hunan Province of China (Grant No 07JJ3013)the Education Ministry of Hunan Province of China (Grant No 06A038)
文摘This paper presents a treatment of the entanglement transfer between atoms in two distant cavities coupled by an optical fibre. If the atoms resonantly and collectively interact with the local single-mode cavity fields and the dipole-dipole interaction between the atoms is neglected, then it shows that a complete transfer of entanglement from one pair of atoms to another can be deterministically realized. Furthermore, it also investigates the effects of dipole-dipole interaction on entanglement transfer on the condition that the interaction between the atoms and the cavity is much weaker than the coupling between the cavity and the fibre.
基金Project supported by the National Natural Science Foundation of China(Grant No60478049)the Natural Science Foundation of Hubei Province,China(Grant No2006ABB015)the Natural Science Foundation of Huazhong Normal University,China
文摘A system consisting of two different atoms interacting with a two-mode vacuum, where each atom is resonant only with one cavity mode, is considered. The effects of dipole-dipole （dd） interaction between two atoms on the atom-atom entanglement and mode--mode entanglement are investigated. For a weak dd interaction, when the atoms are initially separable, the entanglement between them can be induced by the dd interaction, and the entanglement transfer between the atoms and the modes occurs efficiently; when the atoms are initially entangled, the entanglement transfer is almost not influenced by the dd interaction. However, for a strong dd interaction, it is difficult to transfer the entanglement from the atoms to the modes, but the atom-atom entanglement can be maintained when the atoms are initially entangled.
文摘The high precision assemblies with considerable radial interference should be accompanied by heating and cooling processes.However,the mechanical properties of metals are greatly affected by thermal operations.So,for evaluating the stress distribution and distortion of teeth profiles in a gear/shaft assembly,a transient thermal analysis is necessary for finding the change in mechanical properties.The friction on the contact surface is another important parameter in interaction of the gear with the shaft.Evaluating the gear stress and deformation fields for several modes of heat transfer and friction coefficients showed that the maximum radial or tangential stresses on contact surface of the joint may have more than 8%increase by increasing friction coefficient;while the intensity of heat transfer at cooling stage has lower effect on stress distribution.
基金the National Natural Science Foundation of China(10374007 604720210)
文摘Entanglement transfer is investigated in a dimerized Heisenberg system. Concurrence as the measure of entanglement is calculated by the time-evolved state starting from an initially entangled state of spin pair. It is shown that perfect entanglement transfer can be realized at some special time and suitable interacting.
文摘In this paper we propose a COncurrent Production Engineering System （COPES） for the flexible transfer line （FTL） layout design in a restricted area. COPES first determines the buffer size in front of the bay of each machine tool in the FTL and then initializes a computer aided design （CAD） system to draw the FTL in a restricted area. We develop a set of modules systems which have been integrated into a single framework, in accordance with the practice of concurrent engineering. Concurrent engineering involves the cooperation of these activities. It＇s expected that the developed COPES can improve the cooperation between production engineers＇ and the plant designer. This can be done by enabling the production engineers＇ to make better decision regarding FTL buffer size.
