Driven by the growing demand for next-generation displays,the development of advanced luminescent materials with exceptional photoelectric properties is rapidly accelerating,with such materials including quantum dots ...Driven by the growing demand for next-generation displays,the development of advanced luminescent materials with exceptional photoelectric properties is rapidly accelerating,with such materials including quantum dots and phosphors,etc.Nevertheless,the primary challenge preventing the practical application of these luminescent materials lies in meeting the required durability standards.Atomic layer deposition(ALD)has,therefore,been employed to stabilize luminescent materials,and as a result,flexible display devices have been fabricated through material modification,surface and interface engineering,encapsulation,cross-scale manufacturing,and simulations.In addition,the appropriate equipment has been developed for both spatial ALD and fluidized ALD to satisfy the low-cost,high-efficiency,and high-reliability manufacturing requirements.This strategic approach establishes the groundwork for the development of ultra-stable luminescent materials,highly efficient light-emitting diodes(LEDs),and thin-film packaging.Ultimately,this significantly enhances their potential applicability in LED illumination and backlighted displays,marking a notable advancement in the display industry.展开更多
Zeolite-encapsulated metal nanoclusters are at the heart of bifunctional catalysts,which hold great potential for petrochemical conversion and the emerging sustainable biorefineries.Nevertheless,efficient encapsulatio...Zeolite-encapsulated metal nanoclusters are at the heart of bifunctional catalysts,which hold great potential for petrochemical conversion and the emerging sustainable biorefineries.Nevertheless,efficient encapsulation of metal nanoclusters into a high-silica zeolite Y in particular with good structural integrity still remains a significant challenge.Herein,we have constructed Ru nanoclusters(~1 nm)encapsulated inside a high-silica zeolite Y(SY)with a SiO_(2)/Al_(2)O_(3) ratio(SAR)of 10 via a cooperative strategy for direct zeolite synthesis and a consecutive impregnation for metal encapsulation.Compared with the benchmark Ru/H-USY and other analogues,the as-prepared Ru/H-SY markedly boosts the yields of pentanoic biofuels and stability in the direct hydrodeoxygenation of biomass-derived levulinate even at a mild temperature of 180℃,which are attributed to the notable stabilization of transition states by the enhanced acid accessibility and properly sized constraints of zeolite cavities owing to the good structural integrity.展开更多
We introduce a simple and universal scalable encapsulation strategy for perovskite solar cells based on thermal vacuum evaporation of MgF2or MoO3-xcapping layer followed by sealing the device with glass and UV-curable...We introduce a simple and universal scalable encapsulation strategy for perovskite solar cells based on thermal vacuum evaporation of MgF2or MoO3-xcapping layer followed by sealing the device with glass and UV-curable polymer.The proposed encapsulation method is beneficial to most of the other known encapsulation approaches being fully harmless to perovskite and transporting layers and processible at room temperature.Vacuum deposition of the capping layer promotes efficient removal of water,oxygen and organic solvent residuals from the device prior to sealing and could be easily performed using standard equipment for metal electrode deposition.The proposed strategy is transferrable to any lab-scale perovskite solar cell prototypes regardless of their geometry and architecture and results in excellent stability of the devices in ambient air and long operating conditions.Upon the 1000 hours stability test at ambient air(30%-60% RH),the cells preserved 92.9% of their initial efficiency on average under 1 Sun illumination at constant maximum power point tracking(MPPT,ISOS-L-1) and over 96% under sto rage in the dark(ISOS-D-1),thus evidencing for the high effectiveness of the proposed encapsulation approach.展开更多
Flexible perovskite solar cells(f-PSCs)offer attractive commercial prospects in the near future,enabled by new value propositions,such as mechanical flexibility,or high specific powers.The long-term reliability of the...Flexible perovskite solar cells(f-PSCs)offer attractive commercial prospects in the near future,enabled by new value propositions,such as mechanical flexibility,or high specific powers.The long-term reliability of these devices requires appropriate encapsulation to prevent degradation caused by environmental factors.Here,a lamination protocol is developed,incorporating adhesive materials,barrier foils,and edge sealants,which results in a robust device hermitization.By applying the developed procedure to three different perovskite solar cell configurations(p-i-n with carbon,p-i-n with silver,and n-i with carbon),fabricated with large active areas(1 cm^(2)),the universality of this approach is demonstrated.The best devices preserved over 85%of the initial performance after a sequence of accelerated aging tests based on industry standards(compliant with the IEC 61215 and IEC 61646)comprised of 1400 h of damp heat,50 thermal cycles,and 10 cycles of the humidity-freeze test.展开更多
Aroma compounds are low-molecular-weight organic volatile molecules and are broadly utilized in the food industry.However,due to their high volatility and evaporative losses during processing and storage,the stabiliza...Aroma compounds are low-molecular-weight organic volatile molecules and are broadly utilized in the food industry.However,due to their high volatility and evaporative losses during processing and storage,the stabilization of these volatile ingredients using encapsulation is a commonly investigated practice.Complexation of aroma compounds using starch inclusion complex could be a potential approach due to the hydrophobicity of the left-handed single helical structure.In the present study,we used starch of three different V-type structures,namely V,V,and V,to encapsulate six different aroma compounds,including1-decanol(DN),cis-3-hexen-1-ol(HN),4-allylanisole(AN),γ-decalactone(DA),trans-cinnamaldehyde(CA),and citral(CT).The formed inclusion complexes samples were characterized using complementary techniques,including X-ray diffraction(XRD)and differential scanning calorimetry(DSC).The results showed that upon complexation with aroma compounds,all V-subtypes retained their original crystalline structures.However,different trends of crystallinity were observed for each type of the prepared inclusion complexes.Additionally,among three V-type starches,V-type starch formed inclusion complexes with aroma compounds most efficiently and promoted the formation of FormⅡcomplex.This study suggested that the structure of aroma compounds and the type of V starch could both affect the complexation properties.展开更多
In this study,lipases of CALB(Candida antarctica lipase B),TLL(Thermomyces lanuginosa lipase),RML(Rhizomucor miehei lipase),CALA(Candida antarctica lipase A)and LU(Lecitase?Ultra)were encapsulated into the nucleotideh...In this study,lipases of CALB(Candida antarctica lipase B),TLL(Thermomyces lanuginosa lipase),RML(Rhizomucor miehei lipase),CALA(Candida antarctica lipase A)and LU(Lecitase?Ultra)were encapsulated into the nucleotidehybrid metal coordination polymers(CPs)for diacylglyerols(DAG)preparation.Guanosine 5'-monophosphate(GMP)and adenosine 5'-monophosphate(AMP)were used as coordinating molecules,and metal ions of Fe^(3+),Ba^(2+),Mn^(2+),Ni^(2+)and Cr^(3+)were applied to prepare matrix.Results indicated that,besides Ba^(2+)with AMP,all other metal ions can coordinate with AMP and GMP to generate CPs.In addition,the AMP/Ni was amorphous when standing temperature was 4℃,while it was crystalline when standing temperature was from 30 to 180℃.DAG content from 47.55%to 64.99%was obtained from glycerolysis by CALB@GMP/Ba,RML@GMP/Ba,TLL@GMP/Ba,RML@GMP/Mn and TLL@GMP/Mn.Additionally,CALB@GMP/Fe showed selectivity towards DAG formation in the esterification and DAG content up to 61.88%was obtained.展开更多
Nowadays buildings contain innovative materials,materials from local resources,production surpluses and rapidly renewable natural resources.Phase Change Materials(PCM)are one such group of novel materials which reduce...Nowadays buildings contain innovative materials,materials from local resources,production surpluses and rapidly renewable natural resources.Phase Change Materials(PCM)are one such group of novel materials which reduce building energy consumption.With the wider availability of microencapsulated PCM,there is an opportunity to develop a new type of insulating materials,combinate PCM with traditional insulation materials for latent heat energy storage.These materials are typically flammable and are located on the interior wall finishing yet there has been no detailed assessment of their fire performance.In this research work prototypes of low-density insulating boards for indoor spaces from hemp shives using carbamide resin binder and cold pressing were studied.Bench-scale cone calorimeter tests were conducted to evaluate fire risk,with a focus on assessing material flammability properties and the influence of PCM on the results.In this research,the amount of smoke,heat release rate,effective heat of combustion,specific extinction coefficient,mass loss,carbon dioxide yield,specific loss factor,ignition time of hemp straws samples and samples of hemp straws with 10%and without PCM admixture were compared.There is a risk of flammability for PCM and their fire reaction has not been evaluated when incorporating PCM into interior wall finishing boards.The obtained results can be used by designers to balance the potential energy savings of using PCM with a more complete understanding and predictability of the associated fire risk when using the proposed boards.It also allows for appropriate risk mitigation strategies.展开更多
BACKGROUND Vessels encapsulating tumor clusters(VETC)represent a recently discovered vascular pattern associated with novel metastasis mechanisms in hepatocellular carcinoma(HCC).However,it seems that no one have focu...BACKGROUND Vessels encapsulating tumor clusters(VETC)represent a recently discovered vascular pattern associated with novel metastasis mechanisms in hepatocellular carcinoma(HCC).However,it seems that no one have focused on predicting VETC status in small HCC(sHCC).This study aimed to develop a new nomogram for predicting VETC positivity using preoperative clinical data and image features in sHCC(≤3 cm)patients.AIM To construct a nomogram that combines preoperative clinical parameters and image features to predict patterns of VETC and evaluate the prognosis of sHCC patients.METHODS A total of 309 patients with sHCC,who underwent segmental resection and had their VETC status confirmed,were included in the study.These patients were recruited from three different hospitals:Hospital 1 contributed 177 patients for the training set,Hospital 2 provided 78 patients for the test set,and Hospital 3 provided 54 patients for the validation set.Independent predictors of VETC were identified through univariate and multivariate logistic analyses.These independent predictors were then used to construct a VETC prediction model for sHCC.The model’s performance was evaluated using the area under the curve(AUC),calibration curve,and clinical decision curve.Additionally,Kaplan-Meier survival analysis was performed to confirm whether the predicted VETC status by the model is associated with early recurrence,just as it is with the actual VETC status and early recurrence.RESULTS Alpha-fetoprotein_lg10,carbohydrate antigen 199,irregular shape,non-smooth margin,and arterial peritumoral enhancement were identified as independent predictors of VETC.The model incorporating these predictors demonstrated strong predictive performance.The AUC was 0.811 for the training set,0.800 for the test set,and 0.791 for the validation set.The calibration curve indicated that the predicted probability was consistent with the actual VETC status in all three sets.Furthermore,the decision curve analysis demonstrated the clinical benefits of our model for patients with sHCC.Finally,early recurrence was more likely to occur in the VETC-positive group compared to the VETC-negative group,regardless of whether considering the actual or predicted VETC status.CONCLUSION Our novel prediction model demonstrates strong performance in predicting VETC positivity in sHCC(≤3 cm)patients,and it holds potential for predicting early recurrence.This model equips clinicians with valuable information to make informed clinical treatment decisions.展开更多
BACKGROUND Recently,vessels encapsulating tumor clusters(VETC)was considered as a distinct pattern of tumor vascularization which can primarily facilitate the entry of the whole tumor cluster into the bloodstream in a...BACKGROUND Recently,vessels encapsulating tumor clusters(VETC)was considered as a distinct pattern of tumor vascularization which can primarily facilitate the entry of the whole tumor cluster into the bloodstream in an invasion independent manner,and was regarded as an independent risk factor for poor prognosis in hepatocellular carcinoma(HCC).AIM To develop and validate a preoperative nomogram using contrast-enhanced computed tomography(CECT)to predict the presence of VETC+in HCC.METHODS We retrospectively evaluated 190 patients with pathologically confirmed HCC who underwent CECT scanning and immunochemical staining for cluster of differentiation 34 at two medical centers.Radiomics analysis was conducted on intratumoral and peritumoral regions in the portal vein phase.Radiomics features,essential for identifying VETC+HCC,were extracted and utilized to develop a radiomics model using machine learning algorithms in the training set.The model’s performance was validated on two separate test sets.Receiver operating characteristic(ROC)analysis was employed to compare the identified performance of three models in predicting the VETC status of HCC on both training and test sets.The most predictive model was then used to constructed a radiomics nomogram that integrated the independent clinical-radiological features.ROC and decision curve analysis were used to assess the performance characteristics of the clinical-radiological features,the radiomics features and the radiomics nomogram.RESULTS The study included 190 individuals from two independent centers,with the majority being male(81%)and a median age of 57 years(interquartile range:51-66).The area under the curve(AUC)for the combined radiomics features selected from the intratumoral and peritumoral areas were 0.825,0.788,and 0.680 in the training set and the two test sets.A total of 13 features were selected to construct the Rad-score.The nomogram,combining clinicalradiological and combined radiomics features could accurately predict VETC+in all three sets,with AUC values of 0.859,0.848 and 0.757.Decision curve analysis revealed that the radiomics nomogram was more clinically useful than both the clinical-radiological feature and the combined radiomics models.CONCLUSION This study demonstrates the potential utility of a CECT-based radiomics nomogram,incorporating clinicalradiological features and combined radiomics features,in the identification of VETC+HCC.展开更多
Congenital peritoneal encapsulation(CPE) is a very rare, congenital condition characterised by the presence of an accessory peritoneal membrane which encases a variable extent of the small bowel. It is unclear how CPE...Congenital peritoneal encapsulation(CPE) is a very rare, congenital condition characterised by the presence of an accessory peritoneal membrane which encases a variable extent of the small bowel. It is unclear how CPE develops,however it is currently understood to be a result of an aberrant adhesion in the peritoneal lining of the physiological hernia in foetal mid-gut development. The condition was first described in 1868, and subsequently there have been only 45 case reports of the phenomenon. No formal, systematised review of CPE has yet been performed, meaning the condition remains poorly understood,underdiagnosed and mismanaged. Diagnosis of CPE remains clinical with important adjuncts provided by imaging and diagnostic laparoscopy. Two thirds of patients present with abdominal pain, likely secondary to sub-acute bowel obstruction. A fixed, asymmetrical distension of the abdomen and differential consistency on abdominal palpation are more specific clinical features present in approximately 10% of cases. CPE is virtually undetectable on plain imaging, and is only detected on 40% of patients with computed tomography scan. Most patients will undergo diagnostic laparotomy to confirm the diagnosis.Management of CPE includes both medical management of the critically-unstable patient and surgical laparotomy, partial peritonectomy and adhesiolysis.Prognosis following prompt surgical treatment is excellent, with a majority of patients being symptom free at follow up. This review summarises the current literature on the aetiology, diagnosis and treatment of this rare disease. We also introduce a novel classification system for encapsulating bowel diseases, which may distinguish CPE from the commoner, more morbid conditions of abdominal cocoon and encapsulating peritoneal sclerosis.展开更多
To alleviate the influence of gas compressibility on the process performance of time-pressure dispensing for electronics encapsulation,a predictive model is developed based on power-law fluid to estimate the encapsula...To alleviate the influence of gas compressibility on the process performance of time-pressure dispensing for electronics encapsulation,a predictive model is developed based on power-law fluid to estimate the encapsulant amount dispensed.Based on the simple and effective model,a run by run (RbR) supervisory control scheme is delivered to compensate the variation resulting from gas volume change in the syringe.Both simulation and experiment have shown that the dispensing consistency has been greatly improved with the model-based RbR control strategy developed in this paper.展开更多
Tea polyphenols(TPPs)have attracted significant research interest due to their health benefits.However,TPPs are sensitive to certain environmental and gastrointestinal conditions and their oral bioavailability was fou...Tea polyphenols(TPPs)have attracted significant research interest due to their health benefits.However,TPPs are sensitive to certain environmental and gastrointestinal conditions and their oral bioavailability was found to be very low.Delivery systems made of food-grade materials have been reported to improve the shelf-life,bioavailability and bioefficacy of TPPs.This review discusses the chemistry of TPPs;the setbacks of TPPs for application;and the strategies to counteract application limitations by rationally designing delivery systems.An overview of different formulations used to encapsulate TPPs is provided in this study,such as emulsion-based systems(liposome,nanoemulsion,double emulsion,and Pickering emulsion)and nano/microparticles-based systems(protein-based,carbohydrate-based,and bi-polymer based).In addition,the stability,bioavailability and bioactivities of encapsulated TPPs are evaluated by various in vitro and in vivo models.The current findings provide scientific insights in encapsulation approaches for the delivery of TPPs,which can be of great value to TPPs-fortified food products.Further explorations are needed for the encapsulated TPPs in terms of their applications in the real food industry as well as their biological fate and functional pathways in vivo.展开更多
Lithium–sulfur(Li–S)batteries have become one of the most promising candidates for next-generation batteries owing to their high specific capacity,low cost,and environment-friendliness.Many efforts have been made to...Lithium–sulfur(Li–S)batteries have become one of the most promising candidates for next-generation batteries owing to their high specific capacity,low cost,and environment-friendliness.Many efforts have been made to mitigate the"shuttle effect"through physical adsorption and chemical bonding.MoS2 has been proposed as a cathode material to provide effective anchoring sites for lithium polysulfides(Li PSs),but is still limited by its layer structure.Herein,we designed novel MoS2 nanorods with inner caves based on our previous work,and performed synchronous encapsulation of sulfur during the synthesis process.The outer MoS2 tubular shells physically inhibit the outward diffusion of polysulfide species while the inner particles chemically anchor the polysulfides to prevent shuttling.As the cathode matrix in Li–S batteries,the electrochemical results deliver a high initial discharge capacity of 1213 mAhg^-1 for sulfur at 0.1 C.After cycling at 1 C for 300 cycles,the cells exhibit a capacity decay of only 0.076%per cycle and high average coulombic efficiency over 95%.The tubular MoS2 structure is an innovative and appealing design,which could be regarded as a prospective substrate for the improved performance of Li–S batteries.展开更多
Micro-encapsulation of shrimp oil using the mixture of whey protein concentrate(WPC)and sodium caseinate(SC)(1:1,w/w)as a wall material was carried out.The impact of core/wall material ratios(1:2 and 1:4,w/w)and homog...Micro-encapsulation of shrimp oil using the mixture of whey protein concentrate(WPC)and sodium caseinate(SC)(1:1,w/w)as a wall material was carried out.The impact of core/wall material ratios(1:2 and 1:4,w/w)and homogenizing pressures(13.79 and 27.58 MPa)on characteristics and stability of emulsion was investigated.The size of emulsion oil droplets decreased with increasing homogenizing pressure(P<0.05)but was not influenced by core/wall material ratio(P>0.05).During the extended storage,particle size,flocculation factor(Ff)and coalescence index(Ci)of all emulsions sharply increased,especially in emulsions prepared at 13.79 MPa with a core/wall material ratio of 1:2(P<0.05).After spray drying,micro-encapsulated shrimp oil(MSO)prepared at 13.79 MPa with a core/wall material ratio of 1:2 had the larger size than others(P<0.05).MSO prepared using a core/wall material ratio of 1:4 with homogenizing pressure of 27.58 MPa exhibited higher encapsulation efficiency(EE)(51.3%–52.8%)than others.Thus,both core/wall material ratio and homogenizing pressure directly affected micro-encapsulation of shrimp oil.展开更多
Mesoporous molecular sieve with Al-promoted sulfated rirconia (SZA) based strong solid acid nano-particles within its mesoporous channels was synthesized by using a one-step incipient wetness impregnation method with ...Mesoporous molecular sieve with Al-promoted sulfated rirconia (SZA) based strong solid acid nano-particles within its mesoporous channels was synthesized by using a one-step incipient wetness impregnation method with zirconium sulfate and aluminum sulfate as the precursors. The assemblies of SZA/MCM-41 were obtained by thermal decomposition of the precursors in air.The resultant composite was characterized with various techniques such as nitrogen physisorption, X-ray diffraction, SEM and TEM. It was shown that the well-ordered channels of MCM-41 arranged in hexagonal arrays as well as the hollow tubular morphology was retained. The strong solid acid nanoparticles were isolated born each other and highly, dispersed in the channels. Nitrogen sorption showed the expected decrease in pore volume. The catalytic activity of SZA/MCM-41 composite in the isomerization of n-butane was dramatically improved in comparison to bulk SZA or SZA/silica.展开更多
Self-aggregation and sluggish transport kinetics of cathode materials would usually lead to the poor electrochemical performance for aqueous zinc-ion batteries(AZIBs).In this work,we report the construction of C@VO_(2...Self-aggregation and sluggish transport kinetics of cathode materials would usually lead to the poor electrochemical performance for aqueous zinc-ion batteries(AZIBs).In this work,we report the construction of C@VO_(2) composite via anti-aggregation growth and hierarchical porous carbon encapsulation.Both of the morphology of composite and pore structure of carbon layer can be regulated by tuning the adding amount of glucose.When acting as cathode applied for AZIBs,the C@VO_(2)-3:3 composite can deliver a high capacity of 281 m Ah g^(-1) at 0.2 A g^(-1).Moreover,such cathode also exhibits a remarkably rate capability and cyclic stability,which can release a specific capacity of 195 m Ah g^(-1) at 5 A g^(-1) with the capacity retention of 95.4%after 1000 cycles.Besides that,the evolution including the crystal structure,valence state and transport kinetics upon cycling were also deeply investigated.In conclusion,benefited from the synergistic effect of anti-aggregation morphology and hierarchical porous carbon encapsulation,the building of such C@VO_(2) composite can be highly expected to enhance the ion accessible site,boost the transport kinetics and thus performing a superior storage performance.Such design concept can be applied for other kinds of electrode materials and accelerating the development of highperformance AZIBs.展开更多
We have shown in our first articles [1] [2] that even after encapsulation, the first rapid phase of degradation mechanism observed has been attributed to oxidation of interfaces and an alteration of the charges collec...We have shown in our first articles [1] [2] that even after encapsulation, the first rapid phase of degradation mechanism observed has been attributed to oxidation of interfaces and an alteration of the charges collection process. A second phase slower is induced by the oxidation of the active film, namely a decrease in the absorption and a degradation of the charge transport process. We revealed that another decrease in power conversion efficiency which has been induced by a possible interfacial passivation occurred at the organic/cathode interface, owing to the presence of residual oxygen, moisture and other impurities. This is in reality the real cause of the first rapid phase of degradation mechanism observed.展开更多
IP in IP封装技术有着广泛的用途。在 Mobile IP中 ,它被指定为必须实现的、将数据包由 m obile node的 hom e net-work发向 mobile node当前位置的封装形式。而且 ,它还被用于多点传送、指定安全特性的路由选择、策略路由等。由于 IP i...IP in IP封装技术有着广泛的用途。在 Mobile IP中 ,它被指定为必须实现的、将数据包由 m obile node的 hom e net-work发向 mobile node当前位置的封装形式。而且 ,它还被用于多点传送、指定安全特性的路由选择、策略路由等。由于 IP in IP封装有如此重要作用 ,因此 L inux很早就实现了该功能模块。本文从源代码对该模块的实现进行了分析。展开更多
Gametophytes of Laminaria japonica were cryopreserved in liquid nitrogen using encapsulation-dehydration with two-step cooling method. Gametophytes cultured at 10℃ and under continuous irradiance of 30 μmol m-2 s-1 ...Gametophytes of Laminaria japonica were cryopreserved in liquid nitrogen using encapsulation-dehydration with two-step cooling method. Gametophytes cultured at 10℃ and under continuous irradiance of 30 μmol m-2 s-1 for 3 weeks were en- capsulated in calcium alginate beads. The beads were dehydrated in 0.4 molL-1 sucrose prepared with seawater for 6 h, desiccated in an incubator set at 10℃ and 70% relative humidity for 4 h, pre-frozen at either ?40℃ or ?60℃ for 30 min, and stored in liquid nitrogen for >24 h. As high as 43% of survival rate was observed when gametophytes were thawed by placing the beads in 40℃ seawater and re-hydrated in 0.05 molL-1 citrate sodium prepared using 30‰ NaCl 7 d later. More cells of male gametophytes sur- vived the whole procedure in comparison with female gametophytes. The cells of gametophytes surviving the preservation were able to grow asexually and produce morphologically normal sporophytes.展开更多
Brine shrimp (Artrmia parthenogenetica) which had ingested three water-insoluble antibactrial drugs ie.sulfadiazine(SD), oxytetracycline (OTO) and erythromycin estolate (ERY-Es) were fed to TiIapia andMysis Ⅲ of Pena...Brine shrimp (Artrmia parthenogenetica) which had ingested three water-insoluble antibactrial drugs ie.sulfadiazine(SD), oxytetracycline (OTO) and erythromycin estolate (ERY-Es) were fed to TiIapia andMysis Ⅲ of Penaeus orientalis K..The drug contentS in the predators were then determined. Aferadministration of drugs to TiIapia and Mysis Ⅲ, through the bio-encapsulation of the brine shrimp,efficacious therapeuical concenration of OTC and ERY-Es(but not SD) in the pndators could bereached and meintained for mere than 8 hours.展开更多
基金supported by the National Natural Science Foundation of China(51835005,52273237)the National Key R&D Program of China(2022YFF1500400)。
文摘Driven by the growing demand for next-generation displays,the development of advanced luminescent materials with exceptional photoelectric properties is rapidly accelerating,with such materials including quantum dots and phosphors,etc.Nevertheless,the primary challenge preventing the practical application of these luminescent materials lies in meeting the required durability standards.Atomic layer deposition(ALD)has,therefore,been employed to stabilize luminescent materials,and as a result,flexible display devices have been fabricated through material modification,surface and interface engineering,encapsulation,cross-scale manufacturing,and simulations.In addition,the appropriate equipment has been developed for both spatial ALD and fluidized ALD to satisfy the low-cost,high-efficiency,and high-reliability manufacturing requirements.This strategic approach establishes the groundwork for the development of ultra-stable luminescent materials,highly efficient light-emitting diodes(LEDs),and thin-film packaging.Ultimately,this significantly enhances their potential applicability in LED illumination and backlighted displays,marking a notable advancement in the display industry.
基金supported by the National Natural Science Foundation of China (22288101,21991090,21991091,22078316,22272171 and 22109167)the Sino-French International Research Network (Zeolites)+2 种基金the BL01B1 beamline of SPring-8 and the 1W1B station of Beijing Synchrotron Radiation Facility (BSRF)for the support of XAS measurementsthe Division of Energy Research Resources of Dalian Institute of Chemical Physics for the support of iDPC-STEM measurementsthe support of the Alexander von Humboldt Foundation (CHN 1220532 HFST-P)。
文摘Zeolite-encapsulated metal nanoclusters are at the heart of bifunctional catalysts,which hold great potential for petrochemical conversion and the emerging sustainable biorefineries.Nevertheless,efficient encapsulation of metal nanoclusters into a high-silica zeolite Y in particular with good structural integrity still remains a significant challenge.Herein,we have constructed Ru nanoclusters(~1 nm)encapsulated inside a high-silica zeolite Y(SY)with a SiO_(2)/Al_(2)O_(3) ratio(SAR)of 10 via a cooperative strategy for direct zeolite synthesis and a consecutive impregnation for metal encapsulation.Compared with the benchmark Ru/H-USY and other analogues,the as-prepared Ru/H-SY markedly boosts the yields of pentanoic biofuels and stability in the direct hydrodeoxygenation of biomass-derived levulinate even at a mild temperature of 180℃,which are attributed to the notable stabilization of transition states by the enhanced acid accessibility and properly sized constraints of zeolite cavities owing to the good structural integrity.
基金financially supported by the Russian Science Foundation(19-73-30022)the support from the program of the Interdisciplinary Scientific and Educational School of M.V.Lomonosov Moscow State University “The future of the planet and global environmental change”MSU Program of Development。
文摘We introduce a simple and universal scalable encapsulation strategy for perovskite solar cells based on thermal vacuum evaporation of MgF2or MoO3-xcapping layer followed by sealing the device with glass and UV-curable polymer.The proposed encapsulation method is beneficial to most of the other known encapsulation approaches being fully harmless to perovskite and transporting layers and processible at room temperature.Vacuum deposition of the capping layer promotes efficient removal of water,oxygen and organic solvent residuals from the device prior to sealing and could be easily performed using standard equipment for metal electrode deposition.The proposed strategy is transferrable to any lab-scale perovskite solar cell prototypes regardless of their geometry and architecture and results in excellent stability of the devices in ambient air and long operating conditions.Upon the 1000 hours stability test at ambient air(30%-60% RH),the cells preserved 92.9% of their initial efficiency on average under 1 Sun illumination at constant maximum power point tracking(MPPT,ISOS-L-1) and over 96% under sto rage in the dark(ISOS-D-1),thus evidencing for the high effectiveness of the proposed encapsulation approach.
基金part-funded by the European Union’s Horizon 2020 research and innovation program under the grant agreement no.764047(Espresso project)the Foundation of Polish Science(First TEAM/2017-3/30).
文摘Flexible perovskite solar cells(f-PSCs)offer attractive commercial prospects in the near future,enabled by new value propositions,such as mechanical flexibility,or high specific powers.The long-term reliability of these devices requires appropriate encapsulation to prevent degradation caused by environmental factors.Here,a lamination protocol is developed,incorporating adhesive materials,barrier foils,and edge sealants,which results in a robust device hermitization.By applying the developed procedure to three different perovskite solar cell configurations(p-i-n with carbon,p-i-n with silver,and n-i with carbon),fabricated with large active areas(1 cm^(2)),the universality of this approach is demonstrated.The best devices preserved over 85%of the initial performance after a sequence of accelerated aging tests based on industry standards(compliant with the IEC 61215 and IEC 61646)comprised of 1400 h of damp heat,50 thermal cycles,and 10 cycles of the humidity-freeze test.
基金funded by the USDA National Institute of Food and Agriculture,Agriculture and Food Research Initiative Program,Competitive Grants Program award from the Improving Food Quality(A1361)program FY 2018 as grant#2018-67017-27558。
文摘Aroma compounds are low-molecular-weight organic volatile molecules and are broadly utilized in the food industry.However,due to their high volatility and evaporative losses during processing and storage,the stabilization of these volatile ingredients using encapsulation is a commonly investigated practice.Complexation of aroma compounds using starch inclusion complex could be a potential approach due to the hydrophobicity of the left-handed single helical structure.In the present study,we used starch of three different V-type structures,namely V,V,and V,to encapsulate six different aroma compounds,including1-decanol(DN),cis-3-hexen-1-ol(HN),4-allylanisole(AN),γ-decalactone(DA),trans-cinnamaldehyde(CA),and citral(CT).The formed inclusion complexes samples were characterized using complementary techniques,including X-ray diffraction(XRD)and differential scanning calorimetry(DSC).The results showed that upon complexation with aroma compounds,all V-subtypes retained their original crystalline structures.However,different trends of crystallinity were observed for each type of the prepared inclusion complexes.Additionally,among three V-type starches,V-type starch formed inclusion complexes with aroma compounds most efficiently and promoted the formation of FormⅡcomplex.This study suggested that the structure of aroma compounds and the type of V starch could both affect the complexation properties.
基金the National Natural Science Foundation of China(31772000)。
文摘In this study,lipases of CALB(Candida antarctica lipase B),TLL(Thermomyces lanuginosa lipase),RML(Rhizomucor miehei lipase),CALA(Candida antarctica lipase A)and LU(Lecitase?Ultra)were encapsulated into the nucleotidehybrid metal coordination polymers(CPs)for diacylglyerols(DAG)preparation.Guanosine 5'-monophosphate(GMP)and adenosine 5'-monophosphate(AMP)were used as coordinating molecules,and metal ions of Fe^(3+),Ba^(2+),Mn^(2+),Ni^(2+)and Cr^(3+)were applied to prepare matrix.Results indicated that,besides Ba^(2+)with AMP,all other metal ions can coordinate with AMP and GMP to generate CPs.In addition,the AMP/Ni was amorphous when standing temperature was 4℃,while it was crystalline when standing temperature was from 30 to 180℃.DAG content from 47.55%to 64.99%was obtained from glycerolysis by CALB@GMP/Ba,RML@GMP/Ba,TLL@GMP/Ba,RML@GMP/Mn and TLL@GMP/Mn.Additionally,CALB@GMP/Fe showed selectivity towards DAG formation in the esterification and DAG content up to 61.88%was obtained.
基金supported by the European Regional Development Fund Postdoctoral Research Support“Structures and Technology Development of Smart Insulation Materials for Indoor Microclimate Regulation”1.1.1.2/VIAA/1/16/152the European Social Fund within the Project“Development of the Academic Personnel of Riga Technical University in the Strategic Fields of Specialization”Nr.8.2.2.0/18/A/017.
文摘Nowadays buildings contain innovative materials,materials from local resources,production surpluses and rapidly renewable natural resources.Phase Change Materials(PCM)are one such group of novel materials which reduce building energy consumption.With the wider availability of microencapsulated PCM,there is an opportunity to develop a new type of insulating materials,combinate PCM with traditional insulation materials for latent heat energy storage.These materials are typically flammable and are located on the interior wall finishing yet there has been no detailed assessment of their fire performance.In this research work prototypes of low-density insulating boards for indoor spaces from hemp shives using carbamide resin binder and cold pressing were studied.Bench-scale cone calorimeter tests were conducted to evaluate fire risk,with a focus on assessing material flammability properties and the influence of PCM on the results.In this research,the amount of smoke,heat release rate,effective heat of combustion,specific extinction coefficient,mass loss,carbon dioxide yield,specific loss factor,ignition time of hemp straws samples and samples of hemp straws with 10%and without PCM admixture were compared.There is a risk of flammability for PCM and their fire reaction has not been evaluated when incorporating PCM into interior wall finishing boards.The obtained results can be used by designers to balance the potential energy savings of using PCM with a more complete understanding and predictability of the associated fire risk when using the proposed boards.It also allows for appropriate risk mitigation strategies.
基金Supported by the Project of Shanghai Municipal Commission of Health,No.2022LJ024.
文摘BACKGROUND Vessels encapsulating tumor clusters(VETC)represent a recently discovered vascular pattern associated with novel metastasis mechanisms in hepatocellular carcinoma(HCC).However,it seems that no one have focused on predicting VETC status in small HCC(sHCC).This study aimed to develop a new nomogram for predicting VETC positivity using preoperative clinical data and image features in sHCC(≤3 cm)patients.AIM To construct a nomogram that combines preoperative clinical parameters and image features to predict patterns of VETC and evaluate the prognosis of sHCC patients.METHODS A total of 309 patients with sHCC,who underwent segmental resection and had their VETC status confirmed,were included in the study.These patients were recruited from three different hospitals:Hospital 1 contributed 177 patients for the training set,Hospital 2 provided 78 patients for the test set,and Hospital 3 provided 54 patients for the validation set.Independent predictors of VETC were identified through univariate and multivariate logistic analyses.These independent predictors were then used to construct a VETC prediction model for sHCC.The model’s performance was evaluated using the area under the curve(AUC),calibration curve,and clinical decision curve.Additionally,Kaplan-Meier survival analysis was performed to confirm whether the predicted VETC status by the model is associated with early recurrence,just as it is with the actual VETC status and early recurrence.RESULTS Alpha-fetoprotein_lg10,carbohydrate antigen 199,irregular shape,non-smooth margin,and arterial peritumoral enhancement were identified as independent predictors of VETC.The model incorporating these predictors demonstrated strong predictive performance.The AUC was 0.811 for the training set,0.800 for the test set,and 0.791 for the validation set.The calibration curve indicated that the predicted probability was consistent with the actual VETC status in all three sets.Furthermore,the decision curve analysis demonstrated the clinical benefits of our model for patients with sHCC.Finally,early recurrence was more likely to occur in the VETC-positive group compared to the VETC-negative group,regardless of whether considering the actual or predicted VETC status.CONCLUSION Our novel prediction model demonstrates strong performance in predicting VETC positivity in sHCC(≤3 cm)patients,and it holds potential for predicting early recurrence.This model equips clinicians with valuable information to make informed clinical treatment decisions.
基金The study was reviewed and approved by the Second Hospital of Shandong University Institutional Review Board,IRB No.KYLL-2023LW044.
文摘BACKGROUND Recently,vessels encapsulating tumor clusters(VETC)was considered as a distinct pattern of tumor vascularization which can primarily facilitate the entry of the whole tumor cluster into the bloodstream in an invasion independent manner,and was regarded as an independent risk factor for poor prognosis in hepatocellular carcinoma(HCC).AIM To develop and validate a preoperative nomogram using contrast-enhanced computed tomography(CECT)to predict the presence of VETC+in HCC.METHODS We retrospectively evaluated 190 patients with pathologically confirmed HCC who underwent CECT scanning and immunochemical staining for cluster of differentiation 34 at two medical centers.Radiomics analysis was conducted on intratumoral and peritumoral regions in the portal vein phase.Radiomics features,essential for identifying VETC+HCC,were extracted and utilized to develop a radiomics model using machine learning algorithms in the training set.The model’s performance was validated on two separate test sets.Receiver operating characteristic(ROC)analysis was employed to compare the identified performance of three models in predicting the VETC status of HCC on both training and test sets.The most predictive model was then used to constructed a radiomics nomogram that integrated the independent clinical-radiological features.ROC and decision curve analysis were used to assess the performance characteristics of the clinical-radiological features,the radiomics features and the radiomics nomogram.RESULTS The study included 190 individuals from two independent centers,with the majority being male(81%)and a median age of 57 years(interquartile range:51-66).The area under the curve(AUC)for the combined radiomics features selected from the intratumoral and peritumoral areas were 0.825,0.788,and 0.680 in the training set and the two test sets.A total of 13 features were selected to construct the Rad-score.The nomogram,combining clinicalradiological and combined radiomics features could accurately predict VETC+in all three sets,with AUC values of 0.859,0.848 and 0.757.Decision curve analysis revealed that the radiomics nomogram was more clinically useful than both the clinical-radiological feature and the combined radiomics models.CONCLUSION This study demonstrates the potential utility of a CECT-based radiomics nomogram,incorporating clinicalradiological features and combined radiomics features,in the identification of VETC+HCC.
文摘Congenital peritoneal encapsulation(CPE) is a very rare, congenital condition characterised by the presence of an accessory peritoneal membrane which encases a variable extent of the small bowel. It is unclear how CPE develops,however it is currently understood to be a result of an aberrant adhesion in the peritoneal lining of the physiological hernia in foetal mid-gut development. The condition was first described in 1868, and subsequently there have been only 45 case reports of the phenomenon. No formal, systematised review of CPE has yet been performed, meaning the condition remains poorly understood,underdiagnosed and mismanaged. Diagnosis of CPE remains clinical with important adjuncts provided by imaging and diagnostic laparoscopy. Two thirds of patients present with abdominal pain, likely secondary to sub-acute bowel obstruction. A fixed, asymmetrical distension of the abdomen and differential consistency on abdominal palpation are more specific clinical features present in approximately 10% of cases. CPE is virtually undetectable on plain imaging, and is only detected on 40% of patients with computed tomography scan. Most patients will undergo diagnostic laparotomy to confirm the diagnosis.Management of CPE includes both medical management of the critically-unstable patient and surgical laparotomy, partial peritonectomy and adhesiolysis.Prognosis following prompt surgical treatment is excellent, with a majority of patients being symptom free at follow up. This review summarises the current literature on the aetiology, diagnosis and treatment of this rare disease. We also introduce a novel classification system for encapsulating bowel diseases, which may distinguish CPE from the commoner, more morbid conditions of abdominal cocoon and encapsulating peritoneal sclerosis.
基金the startup research foundation of China Three Gorge University (No.0620070124)
文摘To alleviate the influence of gas compressibility on the process performance of time-pressure dispensing for electronics encapsulation,a predictive model is developed based on power-law fluid to estimate the encapsulant amount dispensed.Based on the simple and effective model,a run by run (RbR) supervisory control scheme is delivered to compensate the variation resulting from gas volume change in the syringe.Both simulation and experiment have shown that the dispensing consistency has been greatly improved with the model-based RbR control strategy developed in this paper.
文摘Tea polyphenols(TPPs)have attracted significant research interest due to their health benefits.However,TPPs are sensitive to certain environmental and gastrointestinal conditions and their oral bioavailability was found to be very low.Delivery systems made of food-grade materials have been reported to improve the shelf-life,bioavailability and bioefficacy of TPPs.This review discusses the chemistry of TPPs;the setbacks of TPPs for application;and the strategies to counteract application limitations by rationally designing delivery systems.An overview of different formulations used to encapsulate TPPs is provided in this study,such as emulsion-based systems(liposome,nanoemulsion,double emulsion,and Pickering emulsion)and nano/microparticles-based systems(protein-based,carbohydrate-based,and bi-polymer based).In addition,the stability,bioavailability and bioactivities of encapsulated TPPs are evaluated by various in vitro and in vivo models.The current findings provide scientific insights in encapsulation approaches for the delivery of TPPs,which can be of great value to TPPs-fortified food products.Further explorations are needed for the encapsulated TPPs in terms of their applications in the real food industry as well as their biological fate and functional pathways in vivo.
基金supported by the National Natural Science Foundation of China(No.21771143)Natural Science Foundation of Shaanxi Province(grant no.2017ZDJC-30,2018JQ2027)+4 种基金Key Research Project of Shaanxi Province(2018ZDCXLGY-08-06)Natural Science Foundation of Jiangsu Province(grant no.BK20170413)Fundamental Research Funds for the Central Universities(grant no.xjj2017084)Foshan Science and Technology Bureau Project(No.2017AG100443)supported by the Cyrus Tang Foundation through the Tang Scholar Program。
文摘Lithium–sulfur(Li–S)batteries have become one of the most promising candidates for next-generation batteries owing to their high specific capacity,low cost,and environment-friendliness.Many efforts have been made to mitigate the"shuttle effect"through physical adsorption and chemical bonding.MoS2 has been proposed as a cathode material to provide effective anchoring sites for lithium polysulfides(Li PSs),but is still limited by its layer structure.Herein,we designed novel MoS2 nanorods with inner caves based on our previous work,and performed synchronous encapsulation of sulfur during the synthesis process.The outer MoS2 tubular shells physically inhibit the outward diffusion of polysulfide species while the inner particles chemically anchor the polysulfides to prevent shuttling.As the cathode matrix in Li–S batteries,the electrochemical results deliver a high initial discharge capacity of 1213 mAhg^-1 for sulfur at 0.1 C.After cycling at 1 C for 300 cycles,the cells exhibit a capacity decay of only 0.076%per cycle and high average coulombic efficiency over 95%.The tubular MoS2 structure is an innovative and appealing design,which could be regarded as a prospective substrate for the improved performance of Li–S batteries.
文摘Micro-encapsulation of shrimp oil using the mixture of whey protein concentrate(WPC)and sodium caseinate(SC)(1:1,w/w)as a wall material was carried out.The impact of core/wall material ratios(1:2 and 1:4,w/w)and homogenizing pressures(13.79 and 27.58 MPa)on characteristics and stability of emulsion was investigated.The size of emulsion oil droplets decreased with increasing homogenizing pressure(P<0.05)but was not influenced by core/wall material ratio(P>0.05).During the extended storage,particle size,flocculation factor(Ff)and coalescence index(Ci)of all emulsions sharply increased,especially in emulsions prepared at 13.79 MPa with a core/wall material ratio of 1:2(P<0.05).After spray drying,micro-encapsulated shrimp oil(MSO)prepared at 13.79 MPa with a core/wall material ratio of 1:2 had the larger size than others(P<0.05).MSO prepared using a core/wall material ratio of 1:4 with homogenizing pressure of 27.58 MPa exhibited higher encapsulation efficiency(EE)(51.3%–52.8%)than others.Thus,both core/wall material ratio and homogenizing pressure directly affected micro-encapsulation of shrimp oil.
文摘Mesoporous molecular sieve with Al-promoted sulfated rirconia (SZA) based strong solid acid nano-particles within its mesoporous channels was synthesized by using a one-step incipient wetness impregnation method with zirconium sulfate and aluminum sulfate as the precursors. The assemblies of SZA/MCM-41 were obtained by thermal decomposition of the precursors in air.The resultant composite was characterized with various techniques such as nitrogen physisorption, X-ray diffraction, SEM and TEM. It was shown that the well-ordered channels of MCM-41 arranged in hexagonal arrays as well as the hollow tubular morphology was retained. The strong solid acid nanoparticles were isolated born each other and highly, dispersed in the channels. Nitrogen sorption showed the expected decrease in pore volume. The catalytic activity of SZA/MCM-41 composite in the isomerization of n-butane was dramatically improved in comparison to bulk SZA or SZA/silica.
基金financially supported by the National Natural Science Foundation of China(Nos.51774203)the Shenzhen Science and Technology Program(Nos.JCYJ20200109105801725)。
文摘Self-aggregation and sluggish transport kinetics of cathode materials would usually lead to the poor electrochemical performance for aqueous zinc-ion batteries(AZIBs).In this work,we report the construction of C@VO_(2) composite via anti-aggregation growth and hierarchical porous carbon encapsulation.Both of the morphology of composite and pore structure of carbon layer can be regulated by tuning the adding amount of glucose.When acting as cathode applied for AZIBs,the C@VO_(2)-3:3 composite can deliver a high capacity of 281 m Ah g^(-1) at 0.2 A g^(-1).Moreover,such cathode also exhibits a remarkably rate capability and cyclic stability,which can release a specific capacity of 195 m Ah g^(-1) at 5 A g^(-1) with the capacity retention of 95.4%after 1000 cycles.Besides that,the evolution including the crystal structure,valence state and transport kinetics upon cycling were also deeply investigated.In conclusion,benefited from the synergistic effect of anti-aggregation morphology and hierarchical porous carbon encapsulation,the building of such C@VO_(2) composite can be highly expected to enhance the ion accessible site,boost the transport kinetics and thus performing a superior storage performance.Such design concept can be applied for other kinds of electrode materials and accelerating the development of highperformance AZIBs.
文摘We have shown in our first articles [1] [2] that even after encapsulation, the first rapid phase of degradation mechanism observed has been attributed to oxidation of interfaces and an alteration of the charges collection process. A second phase slower is induced by the oxidation of the active film, namely a decrease in the absorption and a degradation of the charge transport process. We revealed that another decrease in power conversion efficiency which has been induced by a possible interfacial passivation occurred at the organic/cathode interface, owing to the presence of residual oxygen, moisture and other impurities. This is in reality the real cause of the first rapid phase of degradation mechanism observed.
文摘IP in IP封装技术有着广泛的用途。在 Mobile IP中 ,它被指定为必须实现的、将数据包由 m obile node的 hom e net-work发向 mobile node当前位置的封装形式。而且 ,它还被用于多点传送、指定安全特性的路由选择、策略路由等。由于 IP in IP封装有如此重要作用 ,因此 L inux很早就实现了该功能模块。本文从源代码对该模块的实现进行了分析。
文摘Gametophytes of Laminaria japonica were cryopreserved in liquid nitrogen using encapsulation-dehydration with two-step cooling method. Gametophytes cultured at 10℃ and under continuous irradiance of 30 μmol m-2 s-1 for 3 weeks were en- capsulated in calcium alginate beads. The beads were dehydrated in 0.4 molL-1 sucrose prepared with seawater for 6 h, desiccated in an incubator set at 10℃ and 70% relative humidity for 4 h, pre-frozen at either ?40℃ or ?60℃ for 30 min, and stored in liquid nitrogen for >24 h. As high as 43% of survival rate was observed when gametophytes were thawed by placing the beads in 40℃ seawater and re-hydrated in 0.05 molL-1 citrate sodium prepared using 30‰ NaCl 7 d later. More cells of male gametophytes sur- vived the whole procedure in comparison with female gametophytes. The cells of gametophytes surviving the preservation were able to grow asexually and produce morphologically normal sporophytes.
文摘Brine shrimp (Artrmia parthenogenetica) which had ingested three water-insoluble antibactrial drugs ie.sulfadiazine(SD), oxytetracycline (OTO) and erythromycin estolate (ERY-Es) were fed to TiIapia andMysis Ⅲ of Penaeus orientalis K..The drug contentS in the predators were then determined. Aferadministration of drugs to TiIapia and Mysis Ⅲ, through the bio-encapsulation of the brine shrimp,efficacious therapeuical concenration of OTC and ERY-Es(but not SD) in the pndators could bereached and meintained for mere than 8 hours.