Using Stochastic Colored Petri nets for Designing Multi-Purpose Plants

Designing of a multi-purpose plant as one of the well-known manufacturing systems is more challenging than other manufacturing systems. This paper applies a stochastic colored Petri net (CPN) to design and analyze multi-purpose plants. A simple approach is proposed to determine the utilization of shared resources and to reduce the equipment’s idle times. Three scenarios are presented to describe the proposed model. Generally, according to desire of a decision maker, different scenarios can be considered in the model to achieve to the expected design or plant configuration. The main characteristics of the proposed model are flexibility, the easiness of practical application and the simulation of the model in an easy way.

Water Quality Assessment of the Owena Multi-Purpose Dam, Ondo State, Southwestern Nigeria

Composite water samples taken from Owena Multi-purpose Dam in six sampling campaigns covering the wet and dry seasons were analyzed for physico-chemical and microbial characteristics using standard methods for the examination of water and wastewater jointly published by the American Public Health Association, American Water Works Association and Water Pollution Control Federation. Results showed significant (p < 0.05) seasonal variations in most measured parameters with few showing significant spatial variation. The characteristics of the water from the dam lake revealed an acceptable quality for most measured parameters with low chemical pollutants burden when compared with drinking water standards and water quality for aquaculture. However, high values of turbidity, colour, iron, manganese and microbial load were recorded compared with drinking water standards, which call for proper treatment of the water before distribution for public consumption.

Bias Effects on the Reynolds Stress Using the Multi-Purpose Probe in IR-T1 Tokamak

The effect of the positive bias on Reynolds stress （RS） and its effect on the radial turbulent transport at the edge plasma （r/a =0.9） and scrape-off layer （SOL） region of plasma in tokamak are investigated. The radial and poloidal electric fields （Sr, Ep） and ion saturation current （Is） are measured by multi-purpose probe （MPP）. This probe is fabricated and constructed for the first time in the IR-T1 tokamak. The most advantage of this probe is that the variations of Er and Ep can be measured in different radii at the single shot. Thus the information of different radii can be compared with high precision. The bias voltage is fixed at Vbias = 200 V and it has been applied with the limiter bias that is fixed in r/a = 0.9. Moreover, the phase difference between radial and poloidal electric fields, and temporal evolution of the RS .spectrum detected by MPP are calculated. RS magnitude on the edge （r/a = 0.9） is more than its value in the SOL （r/a = 1.02）. With the applied bias 200 V, ItS and the magnitude of the phase difference between Er and Ep are increased, while the radial turbulent transport is decreased simultaneously. Thus it can be concluded that RS affects radial turbulence. Temporal evolution of the RS spectrum shows that the frequency of RS is increased and reaches its highest value at r/a=0.9 in the presence of bias.

Kill probability modeling of multi-purpose guided missile against gunship and its application

Aimed at current deficiencies of multi-purpose guided missile kill probability model against gunship, the concept of the important coefficient of vulnerability blade unit is proposed in this paper. Laser fuze actuation model and warhead condition kill probability model of rotor blades are established by Monte Carlo method and kinetics theory with new ideas. Based on limited data, armor thickness of gunship is estimated, and a complete multi-purpose guided missile kill probability mathematical model is established, which provides necessary mathematical tool for the accurate and objective analysis of multi-purpose guided missile kill probability against gunship. Based on the establishment of the model, sensitivity analysis and optimal design of the main factors of multi-purpose guided missile kill probability are conducted, and the results show that the single multi-purpose guided missile lethality performance can be improved significantly by sensitivity analysis and optimization.

A cleaner production strategy for acid mine drainage prevention of waste rock:A porphyry copper case

An in-process technology approach is proposed to identify the source of acid mine drainage(AMD)generation and prevent its formation in a porphyry copper waste rock(WR).Adopting actions before stockpiling the WR enables the establishment of potential contaminants and predicts the more convenient method for AMD prevention.A WR sample was separated into size fractions,and the WR’s net acidgenerating potential was quantified using chemical and mineralogical characterization.The diameter of physical locking of sulfides(DPLS)was determined,and the fractions below the DPLS were desulfurized using flotation.Finally,the WR fractions and tailing from the flotation test were submitted to acid-base accounting and weathering tests to evaluate their acid-generating potential.Results show that the WR’s main sulfide mineral is pyrite,and the DPLS was defined as 850μm.A sulfide recovery of 91%was achieved using a combination of HydroFloat^(®)and Denver cells for a size fraction lower than DPLS.No grinding was conducted.The results show that size fractions greater than DPLS and the desulfurized WR are unlikely to produce AMD.The outcomes show that in-processing technology can be a more proactive approach and an effective tool for avoiding AMD in a porphyry copper WR.

对辊式油茶果籽壳清选机的设计与试验

针对现有油茶果籽壳清选机清选效果不佳、茶籽损伤率高问题,设计了一种采用齿光辊清选原理的对辊式油茶果籽壳清选机。同时,对油茶籽、壳的物理特性进行了研究,对清选装置辊组排布方式、齿光辊组数、清选关键部件齿辊齿形和直径分别进行了设计,分析了清选状态时油茶壳受力情况。为验证对辊式油茶果籽壳清选机是否达到了预期设计目标,设计了三因素三水平正交试验,选取清选间隙、辊轴转速、喂入量为试验因素,以茶籽破碎率和清选率为评价指标,对清选机进行现场试验。结果表明:清选间隙为3.13 mm、轴辊转速为298.25 r/min、喂入量为1.51 t/h时,对辊式油茶果籽壳清选机获得最佳清选效果,此时茶籽破损率为3.30%,清选率为96.79%。

Vector cleaner:一种新的去除测序目的基因载体序列的方法

Sanger测序法测序目的基因常包含有目的基因和载体序列,为了快速去除测序目的基因载体序列,提出了一种新的目的基因载体序列去除方法并开发了程序Vector cleaner。首先利用该程序批量读取引物信息和目的基因测序序列;其次,程序在所读取的引物序列上建立引物半长的滑动窗口来产生种子,通过计数种子与测序序列的匹配次数,定位引物位置和删除引物两侧的载体序列;最后,程序通过比较上游引物序列和其反向互补序列分别与测序序列匹配种子数,判断和转换正义链。使用Vector cleaner对12条GhVIN1基因测序序列进行去载体测试,并与Seqclean和SeqMan软件相比较。结果表明:Vector cleaner能有效去除棉花GhVIN1基因测序载体序列,识别并翻译反义链序列。与Seqclean和SeqMan软件相比较,Vector cleaner正确率高,敏感性强。Vector cleaner、SeqMan和Seqclean所测试序列的总序列数正确率分别为100%、100%和91.6%,总碱基正确率分别为99.90%、99.00%和94.33%。与同类软件比较,Vector cleaner更适合实验人员批量去除测序目的基因载体序列,具有准确率高、敏感性强、自动翻译反义链的特点。

JP-cleaner型清洁机器人控制系统设计

介绍了一种JPcleaner型清洁机器人的控制系统,包括主控电路、执行机构以及传感器电路3个子系统.该控制系统以通用性和功能完备为目标,使机器人具备了智能清洁的能力.

A cleaner two-step synthesis of high purity diallyldimethylammonium chloride monomers for flocculant preparation

In order to improve the flocculation efficiency of polydiallyldimethylammonium chloride（PDADMAC）, high molecular weight PDADMAC should be prepared from high purity diallyldimethylammonium chloride（DADMAC） monomers. In this paper, a cleaner method with microwave irradiation and alkali solidification was proposed for preparing high pure DADMAC by selective heating under low temperature, and the prepared high purity DADMAC is characterized using FTIR and atomic absorption spectrometry. The new method provides a solution to the key technical problem of PDADMAC synthesis. Comparing with the conventional methods, the results showed that the advantages of the novel synthesis include： （a） high purity DADMAC is improved from 57% to 71% ; （b） reaction time of tertiary amine preparation is shortened from 6 h to 7 min; （c） water instead of acetone was used as reaction medium; （d） toxic by-products, wastewater and waste gas are eliminated. Flocculant made from the synthesized high purity DADMAC monomers was proved more efficient in flocculation tests.

Virtual design and performance prediction of a silencing air cleaner used in an I.C.engine intake system

This paper reports results of the authors’ studies on the virtual design method used in the development of low noise intake system of I.C. engine. The resulting high pass-by noise at level above the legislative target at full throttle when engine speed was around 5200 r/min necessitated a BEM-aided redesign task, following the typical process of design and development of an intake system. During the initial design, based on the acoustic theory and the requirements (1. The air flux of the redesigned should equal to or exceed the value of the original flux; 2. The filtering area must not be degraded), and considering the constraint of space in the engine compartment, total volume and rough internal dimensions were determined. During the detailed design, the exact internal dimensions of the air cleaner were determined, and an effective method was applied to improve the acoustic performance at low frequency. The predicted sound power of the intake system indicated that the objective of reducing the overall engine noise by minimizing intake system noise was achieved.

Relationship between ecological economics and circular economy,eco-industry,cleaner production,and other relevant categories

Eco-industry, circular economy, cleaner production, industrial ecology or industrial ecosystem and other subjects are all categories related to sustainable developinent. This paper studies the relations and differences between the four categories and sustainable development as well as ecological economics. Circular economy, eco-industry, industrial ecosystem and cleaner production were put forward during the revolution in “end treatment pattern” of traditional industrial society. Industrial ecology, eco-industry and circular economy theory are three content expansions of cleaner production. Ecological economics is of instructive function theoretically and methodologically for circular economy, eco-industrial, cleaner production and industrial ecology. Circular economy theory is easier to be accepted, compared with ecological economics theory. And circular economy in nature is the complete application of ecological economics theory.

From Less or No Waste Manufacturing and Cleaner Production to Recycle Economy -- A Review on the Theoretical Research and Practice of Ecological Enterprises in China

Based on systematical research on the conception evolution of ecological enterprise, theoretical and practical development of constructing ecological enterprise, the paper makes conclusion that ecological enter- prises are developing into a new stage in which governments are launching some pilot projects about construct- ing ecological enterprises. And after that, governments should make policies to spread construction of ecological enterprises, to construct ecological enterprises in legal system and conforming to the standard as soon as possibly. So that, the basic units of ecological economy that fit to the conditions of China will be set up.

Cleaner Production of Wheat Straw Pulp HUANG

A pulping method using NH4OH with less amount of KOH as cooking liquor on wheat straw was developed. KOH could reduce consumption of NH3 and cooking time for its strong alkalinity. The effects of various pulping conditions such as composition of cooking liquor, liquid-to-solid ratio, maximum temperature, cooking time to the maximum temperature and cooking time at the maximum temperature were studied. Experimental results indicated that the rate of delignification was 85.12% and the pulp yield was 49.65% under suitable pulping conditions. It looks promising to use black liquor containing nitrogen, phosphorus, potassium and organic substance as fertilizer resources for agricultural production. A new pattern of ecological cycling may be set up between paper industry and farming.

Cleaner and convenient preparation of 3-（4,6-dimethoxy-pyrimidin-2-yloxy）-2-methyl-phenol

Environmental concerns have highlighted the need of cleaner technologies. A cleaner, convenient and selective technology has been developed for the preparation of 3-(4,6-dimethoxy-pyrimidin-2-yloxy)-2-methyl-phenol (DPMP) from 2-methyl-benzene-1,3-diol in water as solvent. The isolated yield of DPMP is up to 86% in good selectivity. The product structure was characterized by conventional methods, H-NMR and MS. This technology belongs to the modern concept of 1 environmentally friendly low wastes or non-wastes technology (LWNWT).

Design of policy mechanism to promote cleaner production in China

In order to promote cleaner production in China, a package of policy options was presented based on the identification of the barriers encountered in the CP demonstration project and the effectiveness and feasibility of policy options for the CP implementation were analyzed. Furthermore, the policy mechanism framework was given, which composes of compulsory, economic incentive, social pressure and supportive function. Finally, the implementation strategy of the policy mechanism, in which the emphasis will be changed from compulsory policy options towards economic and social pressure policy options, was proposed.

Level and potential of cleaner production in Baosteel's sintering process

It is necessary for the sintering process to carry out cleaner production, which is also of great significance to the iron and steel enterprises of a long-flow process. According to the cleaner production standard recently issued by China＇ s Ministry of Environmental Protection, the research detailed in this study has analyzed and estimated the level of cleaner production at Baosteel in the aspects of technical equipment, resource and energy utilization, product quality, emissions, recycling and environmental management, etc. The research also expatiated some effective measures with which cleaner production can be carried out in Baosteel＇s sintering process, and discovered some potential opportunities of cleaner production.

Cleaner production for continuous digester processes based on hybrid Pareto genetic algorithm

Pulping production process produces a large amount of wastewater and pollutant emitted, which has become one of the main pollution sources in pulp and paper industry. To solve this problem, it is necessary to implement cleaner production by using modeling and optimization technology. This paper studies the modeling and multi\|objective genetic algorithms for continuous digester process. First, model is established, in which environmental pollution and saving energy factors are considered. Then hybrid genetic algorithm based on Pareto stratum\|niche count is designed for finding near\|Pareto or Pareto optimal solutions in the problem and a new genetic evaluation and selection mechanism is proposed. Finally using the real data from a pulp mill shows the results of computer simulation. Through comparing with the practical curve of digester,this method can reduce the pollutant effectively and increase the profit while keeping the pulp quality unchanged.

Experimental and numerical analysis of an air cleaner's acoustic performance

To improve acoustic performance of an air cleaner system,both experimental and theoretical studies were carried out.The air cleaner＇s acoustic numerical model was built by finite element methods（FEM）.Acoustic parameters of filter paper imported in the FEM model were calculated according to experiential formulas.Based on the models,the cleaner＇s acoustic character of transmission loss（TL） was computed.To verify the numerical results,TL results of the real air cleaner with or without filter paper were tested by four-microphone transferring function method.The experimental results show that the filter paper influence acoustic performance of the air cleaner significantly,especially in mid and high frequency band,and should be considered in numerical simulation.Comparisons between experimental and numerical results show that the numerical model is accurate enough to be used in multi-scheme acoustic optimization.Based on our study,TL results of two schemes were calculated and analyzed,which is useful to the air cleaner＇s final design decision.

IMPLEMENTATION OF CLEANER PRODUCTION STRATEGIES TOWARDS A SUSTAINABLE CITY

Rapid urbanization and growing size of cities will have an increasing impact on the global environment in the 21st century. As an engine of urban development to drive economic growth and technological innovations, industry has moved its focus from controlling environmental hazards to stimulating sustainable industrial development throughout the entire product lifecycle. These process- and technology-driven innovations for industrial production are prerequisites for enhancement of urban environment and sustainable development of cities. In this review, problems of environment and resources scarcity associated with rapid urbanization are demonstrated. And, on the basis of expatiations on the concepts and policies of the cleaner production(CP) and other similar initiatives with the goal of preventing pollution at the source and of managing the raw material more efficiently, two different ways to link the practice of cleaner production in industrial sector with performance of urban environment are discussed in detail. Then, the introduction, practice and legislation of CP strategies in China are outlined, and possibility for China to develop CPC (Cleaner Practices for Cities) approaches in the demonstration cities is discussed. Finally, some suggestions on implementation of CPC strategies are put forward.

Research on Development Status and Countermeasures of Agricultural Cleaner Production

In the study,the connotation and objectives of agricultural cleaner production were introduced firstly,and then the development status of agricultural cleaner production in China was analyzed,and the problems existing in the development of agricultural cleaner production were pointed out.From the strategy of agricultural sustainable development,the necessity and feasibility of implementing agricultural cleaner production in China were discussed.Finally,some related countermeasures were put forward according to the problems existing in the development of agricultural cleaner production,so as to provide theoretical references for the realization of agricultural sustainable development in China.