Pre-stack-texture-based reservoir characteristics and seismic facies analysis

Seismic texture attributes are closely related to seismic facies and reservoir characteristics and are thus widely used in seismic data interpretation.However,information is mislaid in the stacking process when traditional texture attributes are extracted from poststack data,which is detrimental to complex reservoir description.In this study,pre-stack texture attributes are introduced,these attributes can not only capable of precisely depicting the lateral continuity of waveforms between different reflection points but also reflect amplitude versus offset,anisotropy,and heterogeneity in the medium.Due to its strong ability to represent stratigraphies,a pre-stack-data-based seismic facies analysis method is proposed using the selforganizing map algorithm.This method is tested on wide azimuth seismic data from China,and the advantages of pre-stack texture attributes in the description of stratum lateral changes are verified,in addition to the method＇s ability to reveal anisotropy and heterogeneity characteristics.The pre-stack texture classification results effectively distinguish different seismic reflection patterns,thereby providing reliable evidence for use in seismic facies analysis.

Friction Characteristics of Nanoscale Sliding Contacts between Multi-Asperity Tips and Textured Surfaces

Nanoscale sliding contacts of smooth surfaces or between a single asperity and a smooth surface have been widely investigated by molecular dynamics simulations, while there are few studies on the sliding contacts between two rough surfaces. Actually, the friction of two rough surfaces considering interactions between more asperities should be more realistic. By using multiscale method, friction characteristics of two dimensional nanoscale sliding contacts between rigid multi-asperity tips and elastic textured surfaces are investigated. Four nanoscale textured surfaces with different texture shapes are designed, and six multi-asperity tips composed of cylindrical asperities with different radii are used to slide on the textured surfaces. Friction forces are compared for different tips, and effects of the asperity radii on the friction characteristics are investigated. Average friction forces for all the cases are listed and compared, and effects of texture shapes of the textured surfaces are discussed. The results show that textured surface II has a better structure to reduce friction forces. The multi-asperity tips composed of asperities with R=20r0 （r0=0.227 7 nm） or R=30r0 get higher friction forces compared with other cases, and more atoms of the textured surfaces are taken away by these two tips, which are harmful to reduce friction or wear. For the case of R=10ro, friction forces are also high due to large contact areas, but the sliding processes are stable and few atoms are taken away by the tip. The proposed research considers interactions between more asperities to make the model approach to the real sliding contact problems. The results will help to vary or even control friction characteristics by textured surfaces, or provide references to the design of textured surfaces.

Experimental Study on Wear Performance and Oil Film Characteristics of Surface Textured Cylinder Liner in Marine Diesel Engine

It is of a vital importance to reduce the frictional losses in marine diesel engines. Advanced surface textures have provided an e ective solution to friction performance of rubbing pairs due to the rapid development of surface engineering techniques. However,the mechanisms through which textured patterns and texturing methods prove beneficial remains unclear. To address this issue,the tribological system of the cylinder liner?piston ring(CLPR) is investigated in this work. Two types of surface textures(Micro concave,Micro V?groove) are processed on the cylinder specimen using di erent processing methods. Comparative study on the friction coe cients,worn surface texture features and oil film characteristics are performed. The results demonstrate that the processing method of surface texture a ect the performance of the CLPR pairs under the specific testing conditions. In addition the micro V?groove processed by CNCPM is more favorable for improving the wear performances at the low load,while the micro?con?cave processed by CE is more favorable for improving the wear performances at the high load. These findings are in helping to understand the e ect of surface texture on wear performance of CLPR.

Multi-scale pore fractal characteristics of differently ranked coal and its impact on gas adsorption

Well-developed pores and cracks in coal reservoirs are the main venues for gas storage and migration.To investigate the multi-scale pore fractal characteristics,six coal samples of different rankings were studied using high-pressure mercury injection(HPMI),low-pressure nitrogen adsorption(LPGA-N2),and scanning electron microscopy(SEM)test methods.Based on the Frankel,Halsey and Hill(FHH)fractal theory,the Menger sponge model,Pores and Cracks Analysis System(PCAS),pore volume complexity(D_(v)),coal surface irregularity(Ds)and pore distribution heterogeneity(D_(p))were studied and evaluated,respectively.The effect of three fractal dimensions on the gas adsorption ability was also analyzed with high-pressure isothermal gas adsorption experiments.Results show that pore structures within these coal samples have obvious fractal characteristics.A noticeable segmentation effect appears in the Dv1and Dv2fitting process,with the boundary size ranging from 36.00 to 182.95 nm,which helps differentiate diffusion pores and seepage fractures.The D values show an asymmetric U-shaped trend as the coal metamorphism increases,demonstrating that coalification greatly affects the pore fractal dimensions.The three fractal dimensions can characterize the difference in coal microstructure and reflect their influence on gas adsorption ability.Langmuir volume(V_(L))has an evident and positive correlation with Dsvalues,whereas Langmuir pressure(P_(L))is mainly affected by the combined action of Dvand Dp.This study will provide valuable knowledge for the appraisal of coal seam gas reservoirs of differently ranked coals.

MULTI-SCALE CHARACTERISTICS STUDY ON THE FREQUENCY OF FOGGY DAYS OCCURRING IN NANJING IN DECEMBER 2007

Based on the number of foggy days in Nanjing in December from 1980 to 2011, we analyzed the surface temperature and atmospheric circulation characteristics of foggy years and less-foggy years. Positive anomalies of the Arctic Oscillation(AO) were found to weaken the East Asian trough, which is not conducive to the southward migration of cold air. Simultaneously, this atmospheric condition favors stability as a result of a high-pressure anomaly from the middle Yangtze River Delta region. A portion of La Nia events increases the amount of water vapor in the South China Sea region, so this phenomenon could provide the water vapor condition required for foggy days in Nanjing.Based on the data in December 2007, which contained the greatest number of foggy days for the years studied, the source of fog vapor in Nanjing was primarily from southern China and southwest Taiwan Island based on a synoptic scale study. The water vapor in southern China and in the southwestern flow increased, and after a period of 2-3 days,the humidity in Nanjing increased. Simultaneously, the water vapor from the southwestern of Taiwan Island was directly transported to Nanjing by the southerly wind. Therefore, these two areas are the most important sources of water vapor that results in heavy fog in Nanjing. Using the bivariate Empirical Orthogonal Function(EOF) mode on the surface temperature and precipitable water vapor, the first mode was found to reflect the seasonal variation from early winter to late winter, which reduced the surface temperature on a large scale. The second mode was found to reflect a large-scale,northward, warm and humid airflow that was accompanied by the enhancement of the subtropical high, particularly between December 15-21, which is primarily responsible for the consecutive foggy days in Nanjing.

Texture Characteristics of Thin Grain Oriented Silicon Steel Sheet Produced by Cross Shear Rolling

Commercial grain oriented silicon steel was cold rolled to thickness from 0.06 to 0.10 mm by cross shear rolling, then annealed in vacuum or a hydrogen atmosphere furnace. Deformation textures of the sheets were researched by ODF method and reverse pole figure quantitative analyses. The results indicate that: in the condition of the cross shear rolling, the deformation texture of rolled sheet is generally similar to that of conventional rolled sheet, however, the texture distribution through the thickness is asymmetrical. With mismatch speed ratio increasing, the amount of Goss texture increases. With reduction ratio increasing, the intensity of γ-fiber becomes strong.

Compression of surface texture acceleration signal based on spectrum characteristics

Background Adequate data collection can enhance the realism of online rendering or offline playback of haptic surface textures.A parallel challenge is to reduce communication delays and improve storage space utilization.Methods Based on the similarity of the short-term amplitude spectrum trend,this study proposes a frequency-domain compression method.A compression framework is designed,which first maps the amplitude spectrum into grayscale images,compresses them with a still image compression method,and then adaptively encodes the maximum amplitude and part of the initial phase for each time window to achieve the final compression.Results The comparison between the original signal and the recovered signal shows that when the time-frequency similarity is 90%,the average compression ratio of our method is 9.85%in the case of a single interaction point.The subjective score for similarity was found to be high,with an average of 87.85.Conclusions Our method can be used for offline compression of vibrotactile data.For multi-interaction points in space,the trend similarity grayscale image can be reused,and the compression ratio is further reduced.

Textural characteristics,surface chemistry and oxidation of activated carbon

Numerous researches were reviewed and interpreted to depict a comprehensive illustration of activated carbon and its behavior towards oxidation.Activated carbon as one of the most important adsorbents is tried to be described in this review paper by terms of its＂Textural Characteristics＂and＂Surface Chemistry＂.These two terms,coupled with each other,are responsible for behavior of activated carbon in adsorption processes and in catalytic applications.Although as-prepared activated carbons are usually nonselective and their surfaces suffer from lack of enough reactive groups,their different aspects may be improved and developed by diverse types of modifications.Oxidation is one of the most conventional modifications used for activated carbons.It may be used as a final modification or as a pre-modification followed by further treatment.In this paper,methods of oxidation of activated carbon and other graphene-layer carbon materials are introduced and wet oxidation as an extensively-used category of oxidation is discussed in more detail.

Sedimentary facies and textural characteristics of Cretaceous sandstones in the southern Bida Basin,Nigeria:Implication for reservoir potential and depositional environment

A study of sedimentary facies,mineral and textural characteristics of sections of conglomerates/pebbles and sandstone facies found within the Lokoja and Patti Formations in southern Bida Basin,Nigeria,is carried out to evaluate the paleo-environment and reservoir quality of the sandstones of the formations through field observations and textural and mineralogical(using X-Ray Diffractogram)analyses.Nine lithofacies are identified and grouped into three main facies associations.These sedimentary facies suggest deposition in both foreshore and estuaries.The mineral analysis(XRD)shows that the quartz content in sandstone facies of the Lokoja Formation ranges between 49%and 67%,and that of the Patti Sandstone between 43%and 56%,indicating a quartz dominance.The granulometric studies reveal that the Lokoja Formation comprises coarse-to medium-grained(-0.63 to 1.30φ)sandstone with moderatepoor sorting of 0.72e1.824.On the other hand,medium to fine-grained sandstones dominate the Patti Formation,which is averagely poorly sorted(1.29-1.54φ).The sandstones are coarsely skewed to finely skewed,with the kurtosis ranging from very platykurtic to leptokurtic.Morphological results of the pebbles from both Lokoja and Patti Formations indicate that the study areas are mainly characterized by the interplay of both wave and fluvial processes,which suggests that the environment of deposition of sandstone facies is predominantly of the fluvial to the shallow marine environment with the indication of tidal influence.Integrating sedimentary facies and textural results suggests subtidal sand ridge/foreshore,estuarine mudflat,and estuarine delta environments with fluvial influences.Evidence from the textural and mineral characteristics indicate that the sandstone facies of the Lokoja and Patti Formations are fairly matured and can act as potential hydrocarbon reservoirs in the formations.The facies,XRD mineral,and textural results have revealed potential hydrocarbon reservoir areas and paleo-depositional features of the Lokoja and Patti Formations.

Textural Characteristics and Depositional Environment of Ngrayong Sandstone (Middle Miocene) from Rembang Area, Northeast Java, Indonesia

Granulometric analysis of Ngrayong sandstone samples from Rembang area of NE Java (Indonesia) has been carried out to examine the textural characteristics and elucidate depositional environment. The result data from the grain size analysis indicates that the Ngrayong sediments are classified as sand or muddy sands. They are very fine- to medium-grained (phi values: 1.67 to 3.35), moderately- to well-sorted (standard deviation: 0.19 to 0.57), strongly fine-skewed to strongly coarse-skewed (skewness values: 4.82 to −5.97), and very platykurtic to very leptokurtic (kurtosis values: 0.36 to 2.41). Sandstone samples show unimodal grain size distribution. The sediments are interpreted to be transported in all three modes-traction, saltation and suspension, however, suspension and rolling are the major processes during transportation. Discriminant functions indicate diversity in the depositional environment for the sandstones. However, shallow marine is regarded as the dominant depositional environment. The preponderance of fine-grained sediments and lack of coarse sands suggest low to moderate energy conditions during deposition of Ngrayong sediments.

Analysis for Soil Characteristics of Degraded Grassland on Alpine Meadow

[Objective]The aim of this study is to explore the effects of grassland degradation on soil physical and chemical properties.[Method]The ratio of plant root to soil and soil texture on Alpine Meadow were investigated in this study,and soil available N,P,K,Cu,Zn,organic matter and pH value were also analyzed by routine analysis of soil nutrients in different degraded grasslands.[Result]With the intensification of degraded gradient and the soil depth,the ratio of plant root to soil was decreased gradually.The highest ratio of plant root to soil was in 0-10 cm depth of soil in grassland with different degraded gradients,while its ratio of plant root to soil changed from 0.001 to 0.040 with soil type of loam.Soil chemical characteristic changed in different degraded gradients.The content of available N,P,K reduced significantly with the soil depth and the intensification of degraded gradients.The content of Cu and Zn was relatively lack in degraded grassland.[Conclusion]There is no significant correlation between nutrition content or pH value and the succession degree of degraded grassland.

Study on Physical Properties and Related Spectral Characteristics of Composited Soil with Different Ratio of Feldspathic Sandstone and Sand

[Objective] To study the soil texture, water storage and related spectral characteristics of composited soil. [Method] 3 different ratios of composited soils was designed by using feldspathic sandstone and sand by 3 different ratios, 1：1（C1）, 1：2（C2） and 1：5（C3）, and the CK used loess soil and sand by 1：2, then the soil texture, water storage, soil and winter wheat spectral characteristic were measured and analyzed under those treatments in 2010-2013. [Result] （1） With the increasing of the plant- ing year, treatment C1, C2 and C3 all showed decreasing in the proportions of sand and increasing of silt and the CK showed decreasing of clay and increasing of sand, along 1-30 cm soil depth. Treatment C2 showed the proportion of sand, silt and clay were 76.69%, 18.72% and 4.70%, respectively. （2） The water contents of all the treatments were significant different from other in 0-60 cm soil depth, and showed increasing trend with the increasing of sand proportion. Treatment C2 had higher average water content during the 3 years than treatment CK, C1 and C3 by 21.34%, 11.59% and 3.91% in the same soil depth, respectively. （3） In 2013, the spectral reflection curve characters were similar for all treatment of winter wheat at the jointing stage and filling stage along the full-wave band （350-2 500 nm）, and the reflectance was higher in the jointing stage than the filling stage; the reflection peak was found around 550 nm, a part of green light wave band. Treatment C2 showed the highest canopy that all treatments had similar spectral curves, and the relative reflectance of soil increased during 350-1 750 nm wave length along with the increase of the sand proportion; for treatment CK, C1, C2 and C3, the soil spectral reflectance （y） and wave length （x） appeared highly correlated relationships, they were y=0.18 71 In（x）-0.979 4, y=0.158 7 In（x）-0.801 2, y=0.177 1 In（x）-0.910 8 and y=0.184 5 In（x）-0.944 5, respectively. [Conclusion] Synthesizing the soil physical properties and related spectral character indices, treatment C2 generated the best combination ratio of feldspathic sandstone and sand.

Study on soil water characteristics of tobacco fields based on canonical correlation analysis

In order to identify the principal factors influencing soil water characteristics （SWC） and evaluate SWC effectively, the multivariate-statistical canonical correlation analysis （CCA） method was used to study and analyze the correlation between SWC and soil physical and chemical properties. Twenty-two soil samples were taken from 11 main tobacco-growing areas in Guizhou Province in China and the soil water characteristic curves （SWCC） and basic physical and chemical properties of the soil samples were determined. The results show that： （1） The soil bulk density, soil total porosity and soil capillary porosity have significant effects on SWC of tobacco fiels. Bulk density and total porosity are positively correlated with soil water retention characteristics （SWRC）, and soil capillary porosity is positively correlated with soil water supply characteristics （SWSC）. （2） Soil samples from different soil layers at the same soil sampling point show similarity or consistency in SWC. Inadequate soil water supply capability and imbalance between SWRC and SWSC are problems of tobacco soil. （3） The SWC of loamy clay are generally superior to those of silty clay loam.

Analysis of Landscape Gene Identification and Its Characteristics of Traditional Villages:A Case Study of Zhuge Bagua Village

With the promotion of rural revitalization strategy,the protection of ancient villages belonging to characteristic villages has been paid more and more attention.Based on the perspective of landscape gene,this study used the technology of gene identification and extraction of settlement landscape to identify the unique landscape features of Zhuge BaguaVillage from four aspects of architecture,layout,culture and environment.The results showed that the layout of Zhuge BaguaVillage was special and with the help of the surrounding landscape texture,the layout looked like eight trigrams;Zhuge Bagua Village building was a typical Hui-style building with exquisite decoration and carving;Zhuge BaguaVillage attached great importance to Fengshui,was based on clan blood,and advocated Confucianism and farming;Zhuge Bagua Village was located in a beautiful landscape with a special layout.

Theoretical Analysis and Experimental Research of Surface Texture Hydrodynamic Lubrication

The research on surface texture is developing from single macro-texture to composite micro-nano texture.The current research on the anti-friction mechanism and theoretical models of textures is relatively weak.Studying the characteristics of different types of surface textures and determining the applicable working conditions of each texture is the focus of current research.In this paper,a mathematical model of hydrodynamic lubrication is established based on Navier-Stokes equations.The FLUENT software is used to simulate and analyze the four texture models,explore the dynamic pressure lubrication characteristics of different texture types,and provide data support for texture optimization.The key variable values required by the mathematical model are obtained through the simulation data.The friction coefficient of the texture under different working conditions was measured through friction and wear experiments,and the mathematical model was verified by the experimental results.The research results show that circular texture is suitable for low to medium speed and high load conditions,chevron texture is suitable for medium to high speed and medium to high load conditions,groove texture is suitable for high speed and low load conditions,and composite texture is suitable for high speed and medium to high load conditions.Comparing the experimental results with the results obtained by the mathematical model,it is found that the two are basically the same in the ranking of the anti-friction performance of different textures,and there is an error of 10%−40%in the friction coefficient value.In this study,a mathematical model of hydrodynamic lubrication was proposed,and the solution method of the optimal surface texture model was determined.

Study on Nutrients and Texture of Pickled Huangzhou Radish

[Objectives]The changes in the nutrient contents and texture of pickled Huangzhou radish with pickling time were studied to further improve its edible value and improve its sensory evaluation.[Methods]Huangzhou radish as a raw material was pickled,and exploration was conducted through the following aspects:with the extension time of pickling time,the changes in nutrient contents such as reducing sugars,free amino acids and ascorbic acid were detected in pickled Huangzhou radish,and the changes in the texture characteristics of pickled Huangzhou radish such as hardness,viscosity,elasticity,recoverable deformation,compression power and chewiness were detected.[Results]As the pickling time became longer,the reducing sugar content in pickled Huangzhou radish gradually increased,and when the pickling time exceeded 13 d,the reducing sugar content showed a downward trend;the ascorbic acid content gradually decreased,and the decreasing rate was relatively lower after the pickling time exceeded 7 d;and the amino acid content first increased and then decreased,and when the pickling time exceeded 13 d,the content exhibited basically no change.The hardness of the radish gradually decreased;the viscosity first decreased and then slowly increased;the recoverable deformation first increased and then decreased;the elasticity first increased and decreased;and the chewiness first increased and then decreased.Through this experiment,it is concluded that the pickled Huangzhou radish has richer nutrients and the best taste when the pickling time is 7-10 d.[Conclusions]This study provides a theoretical reference for producing and processing pickled Huangzhou radish,improving the quality of pickled Huangzhou radish and increasing the nutritional value of the product.

Research on surface characteristics of non-traditional finishing

This paper reports results of investigations of some surface characteristics, and resulting performance of parts proc-essed using non-traditional finishing methods. The friction factor, precision keeping and anti-conglutination performance of the finished surfaces are considered, and surface characteristics such as microtopography and machining texture were investigated. The overall performance of surfaces finished using non-traditional finishing methods was found to be significantly better than that of traditional finishing methods.

挤压重组米食用品质研究进展

挤压重组米因其丰富的营养价值及特殊的功能作用而被越来越多的人接受,然而,人们也普遍认为挤压重组米食用品质不如天然大米。本文综述了目前常见的3种挤压重组米(营养强化型重组米、低GI重组米和挤压型方便米饭)的研究现状,从重组米原辅材料、挤压工艺和蒸煮条件等多角度系统性阐述挤压重组米食用品质的影响因素,并探讨了淀粉、脂质和蛋白质等组分对重组米食用品质的影响,以期为挤压重组米食用品质的改善提供参考。

弱酸性电解水用于提升鲜切马铃薯安全品质的研究

目的探究弱酸性电解水和自来水处理的鲜切马铃薯在室温贮藏条件下不同时间段内品质的变化。方法模拟现代厨房贮存模式,经弱酸性电解水和自来水处理的鲜切马铃薯在室温(25±0.5)℃贮藏环境下,贮藏0、7、14、21、28、35h时,检测其感官、色度、质构、淀粉、蛋白质、钾、维生素C、菌落总数、大肠杆菌、沙门氏菌、金黄色葡萄球菌、霉菌、酵母菌。结果经弱酸性电解水处理的鲜切马铃薯在室温贮藏21 h内,经自来水处理的鲜切马铃薯在室温贮藏14 h内,感官正常,其营养成分淀粉、蛋白质、维生素C、钾元素下降较少,金黄色葡萄球菌、沙门氏菌、菌落总数、大肠杆菌、霉菌、酵母菌的含量均在国家标准和团体标准许可的安全范围内,可安全食用。结论弱酸性电解水可显著提升鲜切马铃薯的贮藏品质,抑制其金黄色葡萄球菌、沙门氏菌、菌落总数、大肠杆菌、霉菌、酵母菌繁殖,延长室温贮藏期。

玉米须不溶性膳食纤维分析及其对面包品质和消化特性的影响研究

首先分析玉米须不溶性膳食纤维(corn silk insoluble dietary fiber,CSIDF)的组分和物理特性,再研究其添加量及粒径对面包比容、色泽、质构、孔隙度、感官等品质和消化特性的影响。结果表明,其主要含80.64%膳食纤维和10.15%蛋白质,以及少量的灰分和脂肪,主要由50.41%纤维素和28.80%半纤维素组成,具有良好的持水、持油和膨胀特性,且粒径越大,3种特性越好;添加玉米须不溶性膳食纤维后面包比容减小,色泽加深,硬度增大,孔隙度降低,不同CSIDF添加量及粒径间存在差异,面包品质与CSIDF添加量及粒径基本呈现负相关,综合分析确定粒径最小的D_(1)(平均粒径为24.91μm)最适宜添加,其添加量为3%时较合适;体外消化试验表明,CSIDF可以通过降低面包中RDS含量、提高SDS和RS含量来延缓淀粉的消化吸收,维持血糖稳定。