Experimental investigation on coal pore-fracture variation and fractal characteristics synergistically affected by solvents for improving clean gas extraction

Chemical solvents instead of pure water being as hydraulic fracturing fluid could effectively increase permeability and improve clean methane extraction efficiency.However,pore-fracture variation features of lean coal synergistically affected by solvents have not been fully understood.Ultrasonic testing,nuclear magnetic resonance analysis,liquid phase mass spectrometry was adopted to comprehensively analyze pore-fracture change characteristics of lean coal treated by combined solvent(NMP and CS_(2)).Meanwhile,quantitative characterization of above changing properties was conducted using geometric fractal theory.Relationship model between permeability,fractal dimension and porosity were established.Results indicate that the end face fractures of coal are well developed after CS2and combined solvent treatments,of which,end face box-counting fractal dimensions range from 1.1227 to 1.4767.Maximum decreases in ultrasonic longitudinal wave velocity of coal affected by NMP,CS_(2)and combined solvent are 2.700%,20.521%,22.454%,respectively.Solvent treatments could lead to increasing amount of both mesopores and macropores.Decrease ratio of fractal dimension Dsis 0.259%–2.159%,while permeability increases ratio of NMR ranges from 0.1904 to 6.4486.Meanwhile,combined solvent could dissolve coal polar and non-polar small molecules and expand flow space.Results could provide reference for solvent selection and parameter optimization of permeability-enhancement technology.

Research advances in enhanced coal seam gas extraction by controllable shock wave fracturing

With the continuous increase of mining in depth,the gas extraction faces the challenges of low permeability,great ground stress,high temperature and large gas pressure in coal seam.The controllable shock wave(CSW),as a new method for enhancing permeability of coal seam to improve gas extraction,features in the advantages of high efficiency,eco-friendly,and low cost.In order to better utilize the CSW into gas extraction in coal mine,the mechanism and feasibility of CSW enhanced extraction need to be studied.In this paper,the basic principles,the experimental tests,the mathematical models,and the on-site tests of CSW fracturing coal seams are reviewed,thereby its future research directions are provided.Based on the different media between electrodes,the CSW can be divided into three categories:hydraulic effect,wire explosion and excitation of energetic materials by detonating wire.During the process of propagation and attenuation of the high-energy shock wave in coal,the shock wave and bubble pulsation work together to produce an enhanced permeability effect on the coal seam.The stronger the strength of the CSW is,the more cracks created in the coal is,and the greater the length,width and area of the cracks being.The repeated shock on the coal seam is conducive to the formation of complex network fracture system as well as the reduction of coal seam strength,but excessive shock frequency will also damage the coal structure,resulting in the limited effect of the enhanced gas extraction.Under the influence of ground stress,the crack propagation in coal seam will be restrained.The difference of horizontal principal stress has a significant impact on the shape,propagation direction and connectivity of the CSW induced cracks.The permeability enhancement effect of CSW is affected by the breakage degree of coal seam.The shock wave is absorbed by the broken coal,which may hinder the propagation of CSW,resulting in a poor effect of permeability enhancement.When arranging two adjacent boreholes for CSW permeability enhancement test,the spacing of boreholes should not be too close,which may lead to negative pressure mutual pulling in the early stage of drainage.At present,the accurate method for effectively predicting the CSW permeability enhanced range should be further investigated.

Chemical profiling of bioactive compounds in the methanolic extract of wild leaf and callus of Vitex negundo using gas chromatographymass spectrometry

BACKGROUND The investigation of plant-based therapeutic agents in medicinal plants has revealed their presence in the extracts and provides the vision to formulate novel techniques for drug therapy.Vitex negundo(V.negundo),a perennial herb belonging to the Varbanaceae family,is extensively used in conventional medication.AIM To determine the existence of therapeutic components in leaf and callus extracts from wild V.negundo plants using gas chromatography-mass spectrometry(GCMS).METHODS In this study,we conducted GC-MS on wild plant leaf extracts and correlated the presence of constituents with those in callus extracts.Various growth regulators such as 6-benzylaminopurine(BAP),2,4-dichlorophenoxyacetic acid(2,4-D),α-naphthylacetic acid(NAA),and di-phenylurea(DPU)were added to plant leaves and in-vitro callus and grown on MS medium.RESULTS The results clearly indicated that the addition of BAP(2.0 mg/L),2,4-D(0.2 mg/mL),DPU(2.0 mg/L)and 2,4-D(0.2 mg/mL)in MS medium resulted in rapid callus development.The plant profile of Vitex extracts by GC-MS analysis showed that 24,10,and 14 bioactive constituents were detected in the methanolic extract of leaf,green callus and the methanolic extract of white loose callus,respectively.CONCLUSION Octadecadienoic acid,hexadecanoic acid and methyl ester were the major constituents in the leaf and callus methanolic extract.Octadecadienoic acid was the most common constituent in all samples.The maximum concentration of octadecadienoic acid in leaves,green callus and white loose callus was 21.93%,47.79%and 40.38%,respectively.These findings demonstrate that the concentration of octadecadienoic acid doubles in-vitro compared to in-vivo.In addition to octadecadienoic acid;butyric acid,benzene,1-methoxy-4-(1-propenyl),dospan,tridecanedialdehyde,methylcyclohexenylbutanol,chlorpyrifos,n-secondary terpene diester,anflunine and other important active compounds were also detected.All these components were only available in callus formed in-vitro.This study showed that the callus contained additional botanical characteristics compared with wild plants.Due to the presence of numerous bioactive compounds,the medical use of Vitex for various diseases has been accepted and the plant is considered an important source of therapeutics for research and development.

Technique of coal mining and gas extraction without coal pillar in multi-seam with low permeability

Aimed at the low mining efficiency in deep multi-seams because of high crustalstress,high gas content,low permeability,the compound 'three soft' roof and the trouble-somesafety situation encountered in deep level coal exploitation,proposed a new idea ofgob-side retaining without a coal-pillar and Y-style ventilation in the first-mined key pressure-relieved coal seam and a new method of coal mining and gas extraction.The followingwere discovered:the dynamic evolution law of the crannies in the roof is influenced bymining,the formative rule of 'the vertical cranny-abundant area' along the gob-side,thedistribution of air pressure field in the gob,and the flowing rule of pressure-relieved gas ina Y-style ventilation system.The study also established a theoretic basis for a new miningmethod of coal mining and gas extraction which is used to extract the pressure-relievedgas by roadway retaining boreholes instead of roadway boreholes.Studied and resolvedmany difficult key problems,such as,fast roadway retaining at the gob-side without a coalpillar,Y-style ventilation and extraction of pressure-relieved gas by roadway retainingboreholes,and so on.The study innovated and integrated a whole set of technical systemsfor coal and pressure relief gas extraction.The method of the pressure-relieved gasextraction by roadway retaining had been successfully applied in 6 typical working faces inthe Huainan and Huaibei mining areas.The research can provide a scientific and reliabletechnical support and a demonstration for coal mining and gas extraction in gaseous deepmulti-seams with low permeability.

Determination of phthalate esters in fat-containing foods by packed nanofiber solid-phase extraction column and gas chromatography

A new method for simultaneous determination of four phthalate esters （ PAEs） in commercial fat-containing foods was developed by the combination of a packed nanofibers column based on solid-phase extraction with gas chromatography-flame ionization detector （ GC-FID ）. Conditions for obtaining optimum extraction efficiency such as extraction solvents, morphologies of adsorbent, ion strength and pH were investigated and optimized in detail. Under the optimized conditions, the limits of detection （LODs） found for dibutyl phthalate （DBP） , butyl benzyl phthalate （BBP）, diethyl hexyl phthalate （DEHP） and di-n-octyl phthalate （DNOP） were 50, 25, 50 and 25 ng/g, respectively. Good linearity of four PAEs was achieved in the range of 50 to 4 000 ng/g. The proposed method was applied for analyzing different kinds of fat-containing samples. PAEs in commercial fat-containing samples can be highly extracted by a packed solid-phase extraction column of 5 mg polystyrene （ PS） nanofibers. The satisfactory average recoveries were obtained in the range of 96. 7% to 102. 3% , and the relative standard deviations （RSDs） below 5% were achieved. The proposed method reduces the organic solvent consumption, the complex and tedious procedures for sample pretreatment, and achieves high sensitivity and reproducibility for the investigated PAEs.

Theory and practice of integrated coal production and gas extraction

The integrated extraction of coal and gas combines coal mining with gas capture. Taking into account the gas deposition and flow conditions in the Chinese coal basins, this paper describes the status of the theory and key technologies of this integrated extraction system, and presents its application and practice in the Shaqu, Zhongxing, Fenghuangshan and Pingmei mines. Areas for further improvements in future studies are discussed, focusing in particular on the fundamentals of the extraction system to make it greener, more scientific, and more advanced in both the exploitation and utilization of coal and the gas in coal.

Definition, theory, methods, and applications of the safe and efficient simultaneous extraction of coal and gas

Simultaneous extraction of the coal and gas is an effective method of eliminating coal mine gas disasters while safely exploiting the coal and achieving efficient gas drainage in China, which is widely accepted by the main coal-producing countries around the world. However, the concrete definition of simultaneous extraction is vague and there is little accurate theoretical support for the simultaneous extraction of coal and gas, which makes it difficult to determine an efficient gas drainage method appropriate to the features of coal seams. Based on theoretical analysis, laboratory tests and field observations, a specific definition of simultaneous extraction of coal and gas is proposed after analyzing the characteristics of coal seam occurrences in China, and we developed the mechanism of mining-enhanced permeability and established the corresponding theoretical model. This comprises a process of fracture network formation, in which the original fractures are opened and new fractures are produced by unloading damage. According to the theoretical model, the engineering approaches and their quantitative parameters of ＇unloading by borehole drilling＇ for single coal seams and ＇unloading by protective seam mining＇ for groups of coal seams are proposed, and the construction principles for coal exploitation and gas-drainage systems for different conditions are given. These methods were applied successfully in the Tunlan Coal Mine in Shanxi Province and the Panyi Coal Mine in Anhui Province and could assure safe and efficient simultaneous extraction of coal and gas in these outburst coal mines.

Development and application of an efficient gas extraction model for low-rank high-gas coal beds

To promote gas extraction in low-rank high-gas coal beds, the pore structure characteristics of the coal and their effect on gas desorption were studied. The results show that micropores are relatively rare in low-rank coal; mesopores are usually semi-open and inkpot-shaped whereas macropores are usually slit-shaped. Gas desorption is relatively easy at high- pressure stages, whereas it is difficult at low-pressure stages because of the ＇bottleneck effect＇ of the semi-open inkpot-shaped mesopores. A ＇two-three-two＇ gas extraction model was established following experimental analysis and engineering practice applied in the Binchang mining area. In this model, gas extraction is divided into three periods： a planning period, a transitional period and a production period. In each period, surface extraction and underground extraction are performed simultaneously, and pressure-relief extraction and conventional extraction are coupled to each other. After applying this model, the gas extraction rate rose to 78.8 %.

Induced drill-spray during hydraulic slotting of a coal seam and its influence on gas extraction

Hydraulic slotting can induce drill spray in a gassy,low permeability coal seam.This then influences subsequent gas extraction.This paper describes the drill spray phenomenon from a mechanical perspective and analyzes the effects of water jet damage during slotting.A simulation of the stresses around the drill hole and slot was prepared using FLAC-3D code.It helps explain the induction of drill spray during hydraulic slotting.The stress concentration around the bore increases as the diameter of the hole increases.As the hole enlarges the variation in stress also increases,which introduces an instability into the coal.This allows easy breaking and removal of the coal.Destruction of the coal structure by the water jet is the major factor causing drill spray.Energy stored as either strain or gas pressure is released by the water jet and this causes the coal to fracture and be expelled from the hole.Field tests showed the effect on gas extraction after slotting with drill spray.The concentration of gas increases after drilling.Compared to conventional techniques,the hydraulic slotted bore gives a gas concentration three times higher and has an effective range twice as far.This makes the gas extraction process more efficient and allows reduced construction effort.

Theory of gas extraction from coal seams and its use

Gas extraction is one of the main measures of control and use of gas of coal mines. At present, the design method is under the experimental period and do not satisfy the need of practice. In this paper, the theory of gas extraction of coal seams based upon Darcy law was studied. Mathematical model of gas extraction of coal seams was established and two kinds of solv- ing approaches based on computer software and linear approximation were given. The rightness and the validities of the model were examined with a practical example. Results obtained can be used to determine and optimize the parameters related etc.

Volatile components of Rhizoma Alpiniae Officinarum using three different extraction methods combined with gas chromatography-mass spectrometry

Volatile components from Rhizoma Alpiniae Officinarum were respectively extracted by three methods including hydrodistillation, headspace solid-phase microextraction （HS-SPME） and diethyl ether extraction. A total of 40 （hydrodistillation）, 32 （HS-SPME） and 37 （diethyl ether extraction） compounds were respectively identified by gas chromatography-mass spectrometry （GC/MS） and 22 compounds were overlapped, including β-farnesene, 7-muurolene, 2,6-dimethyl-6- （4-methyl-3-pentenyl）bicyclo[3.1.1]hept-2-ene, eucalyptol and cadina-1（10）, 4-diene and so forth, varying in relative contents. HS-SPME is fast, sample saving and solvent-free and it also can achieve similar profiles as those from hydrodistillation and solvent extraction. Therefore, it can be the priority for extracting volatile components from medicinal plants.

Study of the Reservoir Damage during Cyclic Injection and Extraction Process in the Hutubi Gas Storage

During the injection and extraction process in gas storage,cyclic loading stress is applied to the reservoir pore structure,affecting the capacity and service life of gas storage. To study the influence of cyclic injection and extraction on reservoir physical property,a finite-element model of reservoir elastoplastic damage under the effect of pore pressure is established based on elastoplastic mechanics and fatigue-damage mechanics. Considering the mechanical property of the Hutubi reservoir and the injection-extraction mode of gas storage,the finite-element model is used to study the pore pressure and porosity change,fault safety,and ground surface deformation. The results show that the change in pore pressure and porosity,the deformation of the Hutubi fault,as well as the uplift and sink of the grounds surface are controlled by the fatigue damage of the reservoir pore structure during the injection-extraction process. After a 6-year service life, the cumulative deformation of the reservoir pore reaches its limit,causing pore structure collapse and porosity decrease. As a result,storage capacity declines and the ground surface starts to sink. Through this study,the safety of the Hutubi gas storage is evaluated,and some suggestions for field operations are offered.

Application of deep borehole blasting on fully mechanized hard top-coal pre-splitting and gas extraction in the special thick seam

In order to solve the problems of top-coal inadequate destruction and large amounts of gas emission in mining extra thick and hard coal seam,this study investigated the pre-splitting for deep borehole blasting and gas pre-draining technologies on top coal.The mechanism of the technologies was systematically expounded based on hard top-coal cracks development obtained by numerical simulation and theoretical analysis.The results show that explosive blasting in the hard rock results in a large number of cracks and large displacement in the rock mass due to the effect of explosion stress.Meanwhile,the thick top-coal caves,and desorbing gas flows along the cracks improve gas extraction.Finally,the pre-splitting for deep borehole blasting and gas pre-draining technologies was applied in No.3802 working face of Shui Liandong Coal Mine,which increases monthly output in the face to 67.34 kt and the drained gas concentration to 86.2%.The drained gas average concentration from each borehole reaches 40%,and the effect is remarkable.

Determination of brominated diphenyl ethers in atmospheric particulate matter using selective pressurized liquid extraction and gas chromatography–mass spectrometry with a negative chemical ionization

This study describes the development and validation of a sensitive and reliable method for determination of polybrominated diphenyl ethers（PBDEs）in atmospheric particulate matter using selective pressurized liquid extraction（SPLE）and gas chromatography–mass spectrometry with a negative chemical ionization（GC-NCI-MS）.Extraction and clean-up were performed using PLE with 2 g florisil and 3 g silica placed in the extraction cells.Under optimal conditions,14 PBDEs were extracted at 70℃ using hexane/dichloromethane（50：50,v/v）as solvent.Validation of SPLE returned excellent recoveries for most analytes,with relative standard deviations mostly below20%.Method detection limits ranged from 0.13 to15.38 ng·mL^-1 for the GC-MS analyses.The method was successfully applied to atmospheric particulate matter of Beijing,where analytes were detected in the range of182.79 to 468.99 pg·m^-3.

Feature Extraction and Dimensionality Reduction of Arc Sound under Typical Penetration Status in Metal Inert Gas Welding

Arc sound is well known as the potential and available resource for monitoring and controlling of the weld penetration status,which is very important to the welding process quality control,so any attentions have been paid to the relationships between the arc sound and welding parameters.Some non-linear mapping models correlating the arc sound to welding parameters have been established with the help of neural networks.However,the research of utilizing arc sound to monitor and diagnose welding process is still in its infancy.A self-made real-time sensing system is applied to make a study of arc sound under typical penetration status,including partial penetration,unstable penetration,full penetration and excessive penetration,in metal inert-gas（MIG） flat tailored welding with spray transfer.Arc sound is pretreated by using wavelet de-noising and short-time windowing technologies,and its characteristics,characterizing weld penetration status,of time-domain,frequency-domain,cepstrum-domain and geometric-domain are extracted.Subsequently,high-dimensional eigenvector is constructed and feature-level parameters are successfully fused utilizing the concept of primary principal component analysis（PCA）.Ultimately,60-demensional eigenvector is replaced by the synthesis of 8-demensional vector,which achieves compression for feature space and provides technical supports for pattern classification of typical penetration status with the help of arc sound in MIG welding in the future.

Helium extraction from natural gas using DD3R zeolite membranes

Helium(He)is commercially produced from natural gas by low-temperature condensation.The process is energy extensive because of the extremely low He concentration(<0.3%)and the operation at cryogenic temperature.Herein we demonstrated DD3R zeolite membrane was efficient to extract He from natural gas at atmosphere temperature.The membrane performance was evaluated in terms of temperature,pressure and molar fractions.The overall membrane performance was dominated by the diffusivity selectivity.The single He permeance and ideal He/CH_(4) selectivity were 5.8×10^(-9)mol·m^(-2)·s^(-1)·Pa^(-1)and 79 under a feed pressure of 1.3 MPa.Even though He concentration was as low as 0.22%,the He permeance and He/CH_(4) mixture selectivity were 3.0×10^(-9)mol·m^(-2)·s^(-1)·Pa^(-1)and 44 at 0.7 MPa.During the longterm operation(~130 h)the membrane performance was stable even the feed mixture containing3.6%ethane as contaminations.The results approved the feasibility of DD3R zeolite membranes for He extraction from natural gas.

Gas-liquid-liquid extraction in a novel rotating microchannel extractor

In this work,a novel rotating microchannel extractor(RME)is designed and further used for the extraction of chromium(Ⅲ)from water.Unexpectedly,the micro-extraction had the same effect as carrying out 2.9-stage cross-flow extractions.Various factors,including the gas intake methods,gas intake quantity(Qg),distance between inner rotor and outer wall(D),rotational inner rotor speed(R)and volumetric flow rate(Qa,Qo),were selected to investigate their effect on the extraction efficiency(η)thoroughly.The relation map ofηwith Weaand We(o-g)for RME provides a comprehension for the gas–liquid–liquid extraction process in this RME system.

Microwave Extraction Followed by Solid-phase Extraction for the Determination of Phthalate Esters in Fish Samples by Gas Chromatography

A new analytical procedure based on solid-phase extraction method coupled to GC-FID has been developed and validated for the determination of five phthalate esters （PAEs） （dimethyl-（DMP）, diethyl-（DEP）, di-n-butyl-（DBP）, di-2-ethylhexyl- （DEHP）, di-n-octyl-（DOP）） in fish samples. There was a good linear relationship in the range of 0.05-10μg with the detection limits of 0.09-0.16ng .The recoveries obtained for PAEs ranged from 88.6% to 96.4%with RSD of 4.2%-10.2%.The applicability of the developed method was demonstrated for real fish samples.

Multiresidue Method for Determination of 67 Pesticides in Water Samples Using Solid-Phase Extraction with Centrifugation and Gas Chromatography-Mass Spectrometry

A new multi-residue method based on solid-phase extraction (SPE) with centrifugation was developed for determination and quantitation of 67 pesticides in water samples. Two SPE cartridges were tested: Chromabond C18 and Oasis HLB. Parameters that influence the extraction efficiency such as the eluent volume, the sample loading volume, the addition of organic solvent to water sample, sorbent drying and elute concentration were optimized. The innovation of this work was the examination of the use of a centrifugation technique in both the drying and elution steps. When combined with centrifugation, the volume of the elution solvent was reduced to 2 mL and the time for sorbent drying decreased also to 10 min under vacuum. Under the optimized conditions, this method showed good recoveries higher than 65% - 68% for the 67 analyzed pesticides using the C18 and HLB cartridges with relative standard deviations lower than 9.7% - 12.3%. Limits of quantification were between 2 and 20 ng.L–1. The simplicity of the described method, use of less of organic solvent, short procedure time, and good recoveries demonstrate the advantages of this environmentally friendly approach for routine analysis of numerous samples.

Extraction of essential oil from shaddock peel and analysis of its components by gas chromatography-mass spectrometry

Essential oil, with more than thirty kinds of compounds separated and identified by gas chromatography-mass spectrometry, was extracted from Shatian shaddock peel and Sweet shaddock peel by squeeze-steam distillation and direct steam distillation method. Among their composition, the main components are terpene compounds, which account for 93.926% (mass fraction, the same below) and 85.843% of essential oils extracted from Shatian shaddock peel and Sweet shaddock peel, respectively. Although nootkatone is the major contributor of shaddock characteristic scent, and its contents are 1.069% and 1.749% of essential oils from Sweet shaddock peel and Shatian shaddock peel, respectively. The results show that squeeze-steam distillation gives higher yield and good quality of essential oil and the compositions of essential oils from two kinds of shaddock peels are different, but the main contributors of the shaddock scent are the same.