Multi-Stage Multidisciplinary Design Optimization Method for Enhancing Complete Artillery Internal Ballistic Firing Performance

To enhance the comprehensive performance of artillery internal ballistics—encompassing power,accuracy,and service life—this study proposed a multi-stage multidisciplinary design optimization(MS-MDO)method.First,the comprehensive artillery internal ballistic dynamics(AIBD)model,based on propellant combustion,rotation band engraving,projectile axial motion,and rifling wear models,was established and validated.This model was systematically decomposed into subsystems from a system engineering perspective.The study then detailed the MS-MDO methodology,which included Stage I(MDO stage)employing an improved collaborative optimization method for consistent design variables,and Stage II(Performance Optimization)focusing on the independent optimization of local design variables and performance metrics.The methodology was applied to the AIBD problem.Results demonstrated that the MS-MDO method in Stage I effectively reduced iteration and evaluation counts,thereby accelerating system-level convergence.Meanwhile,Stage II optimization markedly enhanced overall performance.These comprehensive evaluation results affirmed the effectiveness of the MS-MDO method.

Research on Regulation Method of Energy Storage System Based on Multi-Stage Robust Optimization

To address the scheduling problem involving energy storage systems and uncertain energy,we propose a method based on multi-stage robust optimization.This approach aims to regulate the energy storage system by using a multi-stage robust optimal control method,which helps overcome the limitations of traditional methods in terms of time scale.The goal is to effectively utilize the energy storage power station system to address issues caused by unpredictable variations in environmental energy and fluctuating load throughout the day.To achieve this,a mathematical model is constructed to represent uncertain energy sources such as photovoltaic and wind power.The generalized Benders Decomposition method is then employed to solve the multi-stage objective optimization problem.By decomposing the problem into a series of sub-objectives,the system scale is effectively reduced,and the algorithm’s convergence ability is improved.Compared with other algorithms,the multi-stage robust optimization model has better economy and convergence ability and can be used to guide the power dispatching of uncertain energy and energy storage systems.

Irrigation and Thermal Buffering Using Mathematical Modeling

Two methods of irrigation,drip,and sprinkler were studied to determine the response of the Javits green roof to irrigation.The control study was dry unirrigated plots.Drip irrigation consisted of irrigation tubes running through the green roof that would water the soil throughout and sprinkler irrigation used a sprinkler system to irrigate the green roof from above.In all cases,the irrigated roofs had increased the soil moisture,reduced temperatures of both the upper and lower surfaces,reduced growing medium temperatures and reduced air temperatures above the green roof relative to the unirrigated roof.The buffered temperature fluctuations were also studied via air conditioner energy consumption.There was a 28%reduction in air conditioner energy consumption and a 33%reduction in overall energy consumption between dry and irrigated plots.Values of thermal resistance or S were determined for accuracy and for this study,there was little change which is ideal.A series of infra-red and thermal probe measurements were used to determine temperatures in the air and sedum.It was determined that the sprinkler irrigation did a better job than the drip irrigation in keeping cooler temperatures within the green roof.A Mann-Whitney U test was performed to verify the variation in moisture temperatures buffering energy consumption.By getting a p-value<0.05,it indicates that the model is accurate for prediction and medium temperatures were statistically different.

Trace Elements of Multi-stage Minerals and Titanite U-Pb Dating for the Gneisses from Liansan Island,Sulu UHPM Belt

Gneisses with anatectic characteristics from the Liansan island in the Sulu UHPM(ultra-high pressure metamorphic)belt were studied for petrography,titanite U-Pb dating and mineral geochemistry.Three origins of garnets are distinguished:metamorphic garnet,peritectic garnet and anatectic garnet,which are formed in the stages of peak metamorphism,retrograde anatexis and melt crystallization,respectively.The euhedral titanite has a high content of REE and high Th/U ratios,which is interpreted as indicating that it was newly-formed from an anatectic melt.The LA-ICP-MS titanite U-Pb dating yields 214-217 Ma ages for the titanite(melt)crystallization.The distribution of trace elements varies in response to the different host minerals at different stages.At the peak metamorphic stage,Y and HREE are mainly hosted by garnet,Ba and Rb by phengite,Sr,Nb,Ta,Pb,Th,U and LREE by allanite and Y,U and HREE by zircon.During partial melting,Y,Pb,Th,U and REE are released into the melt,which causes a dramatic decline of these element contents in the retrograde minerals.Finally,titanite absorbs most of the Nb,U,LREE and HREE from the melt.Therefore,the different stages of metamorphism have different mineral assemblages,which host different trace elements.

Overview of multi-stage charging strategies for Li-ion batteries

To reduce the carbon footprint in the transportation sector and improve overall vehicle efficiency,a large number of electric vehicles are being manufactured.This is due to the fact that environmental concerns and the depletion of fossil fuels have become significant global problems.Lithium-ion batteries(LIBs)have been distinguished themselves from alternative energy storage technologies for electric vehicles(EVs) due to superior qualities like high energy and power density,extended cycle life,and low maintenance cost to a competitive price.However,there are still certain challenges to be solved,like EV fast charging,longer lifetime,and reduced weight.For fast charging,the multi-stage constant current(MSCC) charging technique is an emerging solution to improve charging efficiency,reduce temperature rise during charging,increase charging/discharging capacities,shorten charging time,and extend the cycle life.However,there are large variations in the implementation of the number of stages,stage transition criterion,and C-rate selection for each stage.This paper provides a review of these problems by compiling information from the literature.An overview of the impact of different design parameters(number of stages,stage transition,and C-rate) that the MSCC charging techniques have had on the LIB performance and cycle life is described in detail and analyzed.The impact of design parameters on lifetime,charging efficiency,charging and discharging capacity,charging speed,and rising temperature during charging is presented,and this review provides guidelines for designing advanced fast charging strategies and determining future research gaps.

To Blend or Not to Blend? Anxiety Buffering Effects of Essential Oil Aromas

Essential oils of pure lavender and lavender blends have been employed as potential anxiolytic aromas in aromatherapy, but a direct comparison of their effectiveness is lacking. The current study investigated the effects of aroma on induced anxiety in non-clinical adults, comparing pure lavender, a commercially available blend and a no aroma control. An experimental, quantitative, mixed factorial design with an opportunity sample of 60 participants was employed. Participants were randomly allocated to three equal groups, one tested in a room infused with lavender aroma, the second with the doTerra Peace® blend, and the third free from any aroma. Participants’ state anxiety scores were measured before and after a novel video-based anxiety induction procedure. Data analysis revealed that the anxiety induction was successful and that both aromas delivered small to medium-sized buffering effects compared to no aroma. The findings add to a small body of research in an area where the practice is global yet has limited scientific evaluation. Future studies utilising brain imaging and blood serum analysis to investigate the anxiolytic mechanism of aromas would be beneficial to further our understanding.

Multi-Stage Improvement of Marine Predators Algorithm and Its Application

The metaheuristic algorithms are widely used in solving the parameters of the optimization problem.The marine predators algorithm(MPA)is a novel population-based intelligent algorithm.Although MPA has shown a talented foraging strategy,it still needs a balance of exploration and exploitation.Therefore,a multi-stage improvement of marine predators algorithm(MSMPA)is proposed in this paper.The algorithm retains the advantage of multistage search and introduces a linear flight strategy in the middle stage to enhance the interaction between predators.Predators further away from the historical optimum are required to move,increasing the exploration capability of the algorithm.In the middle and late stages,the searchmechanism of particle swarmoptimization(PSO)is inserted,which enhances the exploitation capability of the algorithm.This means that the stochasticity is decreased,that is the optimal region where predators jumping out is effectively stifled.At the same time,self-adjusting weight is used to regulate the convergence speed of the algorithm,which can balance the exploration and exploitation capability of the algorithm.The algorithm is applied to different types of CEC2017 benchmark test functions and threemultidimensional nonlinear structure design optimization problems,compared with other recent algorithms.The results show that the convergence speed and accuracy of MSMPA are significantly better than that of the comparison algorithms.

Impact response and energy absorption of metallic buffer with entangled wire mesh damper

An innovative metallic buffer consisting of series-connected hat-shaped entangled wire mesh damper(EWMD)and parallel springs are proposed in this work to enhance the reliability of engineering equipment.The impact response and the energy dissipation mechanism of hat-shaped EWMD under different quasi-static compression deformations(2-7 mm)and impact heights(100-200 mm)are investigated using experimental and numerical methods.The results demonstrate distinct stages in the quasi-static mechanical characteristics of hat-shaped EWMD,including stiffness softening,negative stiffness,and stiffness hardening.The loss factor gradually increases with increasing compression deformation before entering the stiffness hardening stage.Under impact loads,the hat-shaped EWMD exhibits optimal impact energy absorption when it enters the negative stiffness stage(150 mm),resulting in the best impact isolation effect of metallic buffer.However,the impact energy absorption significantly decreases when hat-shaped EWMD enters the stiffness hardening stage.Interestingly,quasi-static compression analysis after experiencing different impact loads reveals the disappearance of the negative stiffness phenomenon.Moreover,with increasing impact loads,the stiffness hardening point progressively shifts to an earlier stage.

Wedge-shaped HfO_(2) buffer layer-induced field-free spin-orbit torque switching of HfO_(2)/Pt/Co structure

Field-free spin-orbit torque(SOT)switching of perpendicular magnetization is essential for future spintronic devices.This study demonstrates the field-free switching of perpendicular magnetization in an HfO_(2)/Pt/Co/TaO_(x) structure,which is facilitated by a wedge-shaped HfO_(2)buffer layer.The field-free switching ratio varies with HfO_(2)thickness,reaching optimal performance at 25 nm.This phenomenon is attributed to the lateral anisotropy gradient of the Co layer,which is induced by the wedge-shaped HfO_(2)buffer layer.The thickness gradient of HfO_(2)along the wedge creates a corresponding lateral anisotropy gradient in the Co layer,correlating with the switching ratio.These findings indicate that field-free SOT switching can be achieved through designing buffer layer,offering a novel approach to innovating spin-orbit device.

Numerical Study and Optimization of CZTS-Based Thin-Film Solar Cell Structure with Different Novel Buffer-Layer Materials Using SCAPS-1D Software

This study explored the performances of CZTS-based thin-film solar cell with three novel buffer layer materials ZnS, CdS, and CdZnS, as well as with variation in thickness of buffer and absorber-layer, doping concentrations of absorber-layer material and operating temperature. Our aims focused to identify the most optimal thin-film solar cell structure that offers high efficiency and lower toxicity which are desirable for sustainable and eco-friendly energy sources globally. SCAPS-1D, widely used software for modeling and simulating solar cells, has been used and solar cell fundamental performance parameters such as open-circuited voltage (), short-circuited current density (), fill-factor() and efficiency() have been optimized in this study. Based on our simulation results, it was found that CZTS solar cell with Cd0.4Zn0.6S as buffer-layer offers the most optimal combination of high efficiency and lower toxicity in comparison to other structure investigated in our study. Although the efficiency of Cd0.4Zn0.6S, ZnS and CdS are comparable, Cd0.4Zn0.6S is preferable to use as buffer-layer for its non-toxic property. In addition, evaluation of performance as a function of buffer-layer thickness for Cd0.4Zn0.6S, ZnS and CdS showed that optimum buffer-layer thickness for Cd0.4Zn0.6S was in the range from 50 to 150nm while ZnS offered only 50 – 75 nm. Furthermore, the temperature dependence performance parameters evaluation revealed that it is better to operate solar cell at temperature 290K for stable operation with optimum performances. This study would provide valuable insights into design and optimization of nanotechnology-based solar energy technology for minimizing global energy crisis and developing eco-friendly energy sources sustainable and simultaneously.

基于Multi-Stage DEA模型的中国细羊毛生产技术效率实证分析

以内蒙古等4省区为例，采用基于规模报酬可变假设的产出主导型Muhi-StageDEA模型，对2001～2010年中国细羊毛生产技术效率进行了测算和分析。研究结果表明，中国细羊毛生产技术效率不高，存在显著的技术效率损失；细羊毛生产在总体上出现了纯技术效率下降和规模效率提高并存的现象，2008年以来纯技术效率提高对细羊毛生产技术效率改善的促进作用逐渐增强，而细羊毛生产规模效率则呈现出了一定的下降趋势；各省区细羊毛生产技术效率存在较大差异，细羊毛生产的规模效率均要高于纯技术效率，规模效率仍是影响各省区细羊毛生产技术效率改善和提高的主要因素。最后提出改善和提高中国细羊毛生产技术效率的政策建议。

Solid components and acid buffering capacity of soils in South China

The effects of soil solid components on soil sensitivity to acid deposition by sequential extraction method were studied. A multiple regression equation of soil sensitivity was set up on the basis of stepwise regression analysis. The results showed that organic matter expressed dual effects that were decided by soil original pH value and exchangeable cation composition on acid buffering reactions. The hydrolysis of activated oxides was a very important proton buffering reaction when in low pH situation. The crystalline oxides also played a role in the buffering reactions, but the role was restricted by the rate of activation of oxides. Meanwhile, the results by stepwise analysis showed that factors that had significant effect on soil acid buffering capacity were content of montmorillite, soil original pH value, Al 0, Mn 0 and CEC in decreasing order. Finally, sixteen soils were classified into four types of sensitive with single index cluster and multiple fuzzy cluster analysis respectively.

Study on the hot deformation behavior of Al-Zn-Mg-Cu-Cr aluminum alloy during multi-stage hot compression

The mechanical behavior and microstructures of an Al-Zn-Mg-Cu-Cr aluminum alloy during multi-stage hot deformation were investigated by thermal stimulation test, optical microscopy, and transmission electron microscopy. The true stress vs true strain curves and the microstructure evolution of two hot deformation procedures were gained. The flow stress of the alloy studied decreases with increasing the deforming passes and declining the temperature, and the larger the temperature decline between adjacent stages, the larger the peak stress fall is. The stress-strain behavior mainly result from the dynamic recovery during deformation, the static recovery and recrystallization in the delay time, and the second phases precipitated from the matrix at high temperature.

Springback analysis and strategy for multi-stage thin-walled parts with complex geometries

Springback of a SUS321 complex geometry part formed by the multi-stage rigid-flexible compound process was studied through numerical simulations and laboratory experiments in this work.The sensitivity analysis was provided to have an insight in the effect of the evaluated process parameters.Furthermore,in order to minimize the springback problem,an accurate springback simulation model of the part was established and validated.The effects of the element size and timesteps on springback model were further investigated.Results indicate that the custom mesh size is beneficial for the springback simulation,and the four timesteps are found suited for the springback analysis for the complex geometry part.Finally,a strategy for reducing the springback by changing the geometry of the blank is proposed.The optimal blank geometry is obtained and used for manufacturing the part.

Sequential maneuvering decisions based on multi-stage influence diagram in air combat

A multi-stage influence diagram is used to model the pilot＇s sequential decision making in one on one air combat. The model based on the multi-stage influence diagram graphically describes the elements of decision process, and contains a point-mass model for the dynamics of an aircraft and takes into account the decision maker＇s preferences under uncertain conditions. Considering an active opponent, the opponent＇s maneuvers can be modeled stochastically. The solution of multistage influence diagram can be obtained by converting the multistage influence diagram into a two-level optimization problem. The simulation results show the model is effective.

Load-to-store:store buffer暂态窗口时间泄露的利用

为了研究现代处理器微架构中的漏洞并制定对应防护,针对负责管理访存指令执行顺序的内存顺序缓冲(MOB)进行分析,发现前向加载会把存在依赖的store指令的数据直接旁路到load指令,推测加载会提前执行不存在依赖的load指令,在带来效率优化的同时,也可能导致执行出错与相应的阻塞。针对Intel Coffee Lake微架构上现有MOB优化机制,分析如何利用内存顺序缓冲的4种执行模式与对应执行时间,构造包括暂态攻击、隐蔽信道与还原密码算法私钥的多种攻击。利用MOB引发的时间差还原内存指令地址,该地址可泄露AES T表实现的索引值。在Intel i5-9400处理器上对OpenSSL 3.0.0的AES-128进行了密钥还原实验,实验结果显示,30000组样本能以63.6%概率还原出一个密钥字节,且由于内存顺序缓冲的特性,该利用隐蔽性优于传统cache时间泄露。

Multi-Stage Hierarchical Channel Allocation in UAV-Assisted D2D Networks:A Stackelberg Game Approach

UAV-assisted D2D networks can provide auxiliary communication for areas with poor communication facilities by using the characteristics of easy deployment of unmanned aerial vehicle(UAV),then it becomes a promising technology.However,the coexistence of UAV and D2D aggravates the conflict of spectrum resources.In addition,when the UAV performs the communication service,it will inevitably cause the location change,which will make the original channel allocation no longer applicable.Inspired by the influence of frequent channel switching on channel allocation,we define the communication utility as a tradeoff between the throughput and channel switching cost.In the considered model,we investigate the multi-stage hierarchical spectrum access problem with maximizing aggregate communication utilities in UAV-assisted D2D networks.In particular,due to the hierarchical feature of the considered network,we adopt Stackelberg game to formulate this spectrum access problem where both the throughput and channel switching cost are considered.We prove that the proposed game has a stable Stackelberg equilibrium(SE),and the heterogeneous network based channel allocation(HN-CA)algorithm is proposed to achieve the desired solution.Simulation results verify the validity of the proposed game and show the effectiveness of the HN-CA algorithm.

A buffering method for quadruped robots based on active impedance control

Compared with wheeled or tracked robots,legged robots exhibit advantages on agile locomotion and higher survival chance for deadly impacts. A buffering strategy is proposed for quadruped robots with non-extreme initial attitudes from the end of air-righting to the steady standing on the ground.This approach consists of landing phase,buffering phase and recovering phase. The variable stiffness control,proportional-derivative( PD) force control and foot trajectory planning are applied to the joints of quadruped robots until the end of the recovering phase. The PD parameters are tuned according to the desired performance of each phase. The above approach is verified on a virtual platform.

Development of a 4 MV Laser-Triggered Multi-Stage Switch

A 22-stage 4 MV laser-triggered multistage multi-channel switch （LTS） was designed according to the hypothesis that the well-proportioned electrical field distribution is helpful in reducing the jitter of delay. Field distribution in the switch section is regulated by a metal field regulation ring and several gradient rings. In order to reduce the jitter further, a SFB/N2 mixture is chosen as the switching medium. The generalized standard deviation of the self-breakdown voltage and the deviation of the average value from the prediction is less than 4.4% and 13% respectively. Linearity of the self-breakdown voltage is better than 0.95. Triggered by a laser pulse of 35 mJ/3 ns, the delay is about 26 ns at a working voltage of 85±3% USB （Self-breakdown Voltage）. Maximum deviation of delay is less than =t=2.5 ns. Jitter is less than 1.5 ns. The delay and jitter decrease with the increase in the working ratio （the ratio of working voltage to USB）, pressure or voltage.

Dynamic performance of cable-stayed bridge tower with multi-stage pendulum mass damper under wind excitations——I:Theory

In this paper, wind-induced vibration control of a single column tower of a cable-stayed bridge with a multi- stage pendulum mass damper （MSPMD） is investigated. Special attention is given to overcoming space limitations for installing the control device in the tower and the effect of varying natural frequency of the towers during construction. First, the finite element model of the bridge during its construction and the basic equation of motion of the MSPMD are introduced. The equation of motion of the bridge with the MSPMD under along-wind excitation is then established. Finally, a numerical simulation and parametric study are conducted to assess the effectiveness of the control system for reducing the wind-induced vibration of the bridge towers during construction. The numerical simulation results show that the MSPMD is practical and effective for reducing the along-wind response of the single column tower, can be installed in a small area of the tower, and complies with the time-variant characteristics of the bridge during its entire construction stage.