The harsh space radiation environment compromises the reliability of an on-board switching fabric by leading to cross-point and switching element(SE)faults.Different from traditional faulttolerant switching fabrics on...The harsh space radiation environment compromises the reliability of an on-board switching fabric by leading to cross-point and switching element(SE)faults.Different from traditional faulttolerant switching fabrics only taking crosspoint faults into account,a novel Input and Output Parallel Clos network,referred to as the(p_1,p_2)-IOPClos,is proposed to tolerate both cross-point and SE faults.In the(p_1,p_2)-IOPClos,there are p_1 and p_2 expanded parallel switching planes in the input and output stages,respectively.The multiple input/output switching planes are interconnected through the middle stage to provide multiple paths in each stage by which the network throughput can be increased remarkably.Furthermore,the network reliability of the(p_1,p_2)-IOPClos under the above both kinds of faults is analyzed.The corresponding implementation cost is also presented along with the network size.Both theoretical analysis and numerical results indicate that the(p_1,p_2)-IOPClos outperforms traditional Clos-type networks at reliability,while has less implementation cost than the multi-plane Clos network.展开更多
A 22-stage 4 MV laser-triggered multistage multi-channel switch （LTS） was designed according to the hypothesis that the well-proportioned electrical field distribution is helpful in reducing the jitter of delay. Fie...A 22-stage 4 MV laser-triggered multistage multi-channel switch （LTS） was designed according to the hypothesis that the well-proportioned electrical field distribution is helpful in reducing the jitter of delay. Field distribution in the switch section is regulated by a metal field regulation ring and several gradient rings. In order to reduce the jitter further, a SFB/N2 mixture is chosen as the switching medium. The generalized standard deviation of the self-breakdown voltage and the deviation of the average value from the prediction is less than 4.4% and 13% respectively. Linearity of the self-breakdown voltage is better than 0.95. Triggered by a laser pulse of 35 mJ/3 ns, the delay is about 26 ns at a working voltage of 85±3% USB （Self-breakdown Voltage）. Maximum deviation of delay is less than =t=2.5 ns. Jitter is less than 1.5 ns. The delay and jitter decrease with the increase in the working ratio （the ratio of working voltage to USB）, pressure or voltage.展开更多
With the increase of link rate, the arbitrator of centralized switch fabric becomes too complicated to implement. A parallel switch fabric based on crossbar, named as PSFBC (Parallel Switch Fabric Based on Crossbar), ...With the increase of link rate, the arbitrator of centralized switch fabric becomes too complicated to implement. A parallel switch fabric based on crossbar, named as PSFBC (Parallel Switch Fabric Based on Crossbar), has been proposed in this paper. PSFBC is composed of k switches whose rate is 1/k of link', these switches exchange cells in parallel; this increases the arbitrator's period and make it easy to implement. Load is evenly distributed to each switch with FCFS (First Come First Serve) rule, it can keep the order of cells in one stream. A multi-class queue scheduling policy is used in PSFBC to ensure the quality of realtime streams. Experiments show that the load on each switch in PSFBC is well balanced, its average delay of cells is little and its performance is very close to centrali{ed switch; and with the increase of number of parallel switches, the loss of PSFBC's performance keeps very small, it becomes easier to implement.展开更多
In this paper, an Independent Window-Access(IWA) scheme is proposed, and the performance of an input-buffered ATM switching fabric with the IWA scheme is analysed by means of a probability generating function approach...In this paper, an Independent Window-Access(IWA) scheme is proposed, and the performance of an input-buffered ATM switching fabric with the IWA scheme is analysed by means of a probability generating function approach, the closed formulas of the average cell delay and the maximum throughput are given, and results show that the IWA scheme makes the switching fabric have better performances than traditional window-access scheme. The computer simulation results are in good agreement with these analytical results.展开更多
This paper analyses the performance of the ATM switch fabric with Combined-Input/ Output Buffering(C-IOB) under two different service principles for the cells at the head of line (HOL) positions of input buffers: Firs...This paper analyses the performance of the ATM switch fabric with Combined-Input/ Output Buffering(C-IOB) under two different service principles for the cells at the head of line (HOL) positions of input buffers: First Come First Service (FCFS)/Random Service(RS) for the set of HOL cells addressed to a given output port with different/same "age" (the waiting time at the HOL position) and Pure Random Service(PRS) for all HOL cells addressed to a given output port regardless of their "ages" while the Queue Loss (QL) transfer scheme is adopted for interaction between input and output buffers in the ATM switch fabric. The results obtained show that the C-IOB ATM switch fabric with PRS service policy and the QL transfer scheme is better than other buffering ATM switch fabrics.展开更多
Current MSM switching fabric has poor performance under unbalanced traffic. This paper presents an alternative, novel Central-stage Buffered Three-stage Clos switching (CB-3Clos) fabric and proves that this fabric can...Current MSM switching fabric has poor performance under unbalanced traffic. This paper presents an alternative, novel Central-stage Buffered Three-stage Clos switching (CB-3Clos) fabric and proves that this fabric can emulate output queuing switch without any speedup. By analyzing the condition to satisfy the central-stage load-balance, this paper also proposes a Central-stage Load-balanced-based Distributed Scheduling algorithm (CLDS) for CB-3Clos. The results show that, compared with Concurrent Round-Robin based Dispatching (CRRD) algorithm based on MSM, CLDS algorithm has high throughput irrespective with the traffic model and better performance in mean packet delay.展开更多
In this paper,the functions and the architecture of an ATM exchange are summarized.The switching fabrics,the line interface module and the control module are discussed in de-tail.An ATM switching system that adopts th...In this paper,the functions and the architecture of an ATM exchange are summarized.The switching fabrics,the line interface module and the control module are discussed in de-tail.An ATM switching system that adopts the scheme described in this paper has been de-veloped.展开更多
Most high-end switches use an input-queued or a combined input- and output-queued architecture. The switch fabrics of these architectures commonly use an iterative scheduling system such as iSLIP. Iterative schedulers...Most high-end switches use an input-queued or a combined input- and output-queued architecture. The switch fabrics of these architectures commonly use an iterative scheduling system such as iSLIP. Iterative schedulers are not very scalable and can be slow. We propose a new scheduling algorithm that finds a maximum matching of a modified I/O mapping graph in a single iteration (hence noniterative). Analytically and experimentally, we show that it provides full throughput and incurs very low delay;it is fair and of low complexity;and it outperforms traditional iterative schedulers. We also propose two switch architectures suited for this scheduling scheme and analyze their hardware implementations. The arbiter circuit is simple, implementing only a FIFO queue. Only half as many arbiters for an iterative scheme are needed. The arbiters operate in complete parallel. They work for both architectures and make the hardware implementations sim-ple. The first architecture uses conventional queuing structure and crossbar. The second one uses separate memories for each queue at an input port and a special crossbar. This crossbar is simple and also has a re-duced diameter and distributed structure. We also show that the architectures have good scalability and re-quire almost no speedup.展开更多
On-demand color switching systems that utilize synchronized semiconductor-catalyzed reduction and photothermal-accelerated oxidation in liquid/solid are highly appealing.Herein,on-demand single/multi-color switching f...On-demand color switching systems that utilize synchronized semiconductor-catalyzed reduction and photothermal-accelerated oxidation in liquid/solid are highly appealing.Herein,on-demand single/multi-color switching fabrics have been constructed by using defective SnO_(2):Sb-based color switching systems.SnO_(2):Sb nanocrystals with the suitable doping concentration accord lattices with abundant free electrons,conferring high photocatalytic and photothermal performances.A well-crafted set of dual light-responsive semiconductor-catalyzed systems with rapid color change can be attained via the homogenous mixture of SnO_(2):Sb with suitable redox dyes to produce single-color(RGB(red,green,blue))and multi-color transitioning(purple and green)systems.The illumination of these systems by 450 nm light triggers rapid photocatalytic discoloration,while irradiation by 980 nm light confers the photothermal effect that accelerates recoloration in air.Besides,the inks can be extended to rewritable fabrics by embedding the nanocrystals and redox dyes into hydroxyethyl cellulose(as the polymer matrix)and then coating on hydrophobic cotton fabrics to produce photo-switchable fabrics with excellent single/multi-color response.By exploiting the dual light interactions with the semiconductor-mediated systems,various images/letters can be remotely printed and erased on the rewritable fabrics which show promise for potential applications as information storage media and visual sensors.Importantly,the present rewritable fabric shows good stability and reversibility.The present work provides insights into the development of novel color-switching materials.展开更多
调度策略是核心路由交换设备性能的重要保证.针对联合输入交叉节点排队(combined input and cross-point queuing,简称CICQ)交换结构现有调度策略在复杂度或性能方面存在的缺陷,深入探讨了CICQ交换结构调度策略设计的基本准则,并提出了C...调度策略是核心路由交换设备性能的重要保证.针对联合输入交叉节点排队(combined input and cross-point queuing,简称CICQ)交换结构现有调度策略在复杂度或性能方面存在的缺陷,深入探讨了CICQ交换结构调度策略设计的基本准则,并提出了CICQ下虚拟通道的概念.基于基本准则和虚拟通道概念,提出一种简单、高效和公平服务的动态轮询调度策略——FDR(fair service and dynamic round robin).其算法复杂度为O(1),具有良好的可扩展性;并依据虚拟通道的状态为其分配调度份额,具有良好的动态实时性能,能够适应流量负载非均衡的网络环境.SPES(switching performance evaluation systcm)仿真结果表明,该算法具有良好的时延、吞吐量和抗突发性能.展开更多
基金supported by the National Natural Science Foundation of China(91338108,91438206)
文摘The harsh space radiation environment compromises the reliability of an on-board switching fabric by leading to cross-point and switching element(SE)faults.Different from traditional faulttolerant switching fabrics only taking crosspoint faults into account,a novel Input and Output Parallel Clos network,referred to as the(p_1,p_2)-IOPClos,is proposed to tolerate both cross-point and SE faults.In the(p_1,p_2)-IOPClos,there are p_1 and p_2 expanded parallel switching planes in the input and output stages,respectively.The multiple input/output switching planes are interconnected through the middle stage to provide multiple paths in each stage by which the network throughput can be increased remarkably.Furthermore,the network reliability of the(p_1,p_2)-IOPClos under the above both kinds of faults is analyzed.The corresponding implementation cost is also presented along with the network size.Both theoretical analysis and numerical results indicate that the(p_1,p_2)-IOPClos outperforms traditional Clos-type networks at reliability,while has less implementation cost than the multi-plane Clos network.
文摘A 22-stage 4 MV laser-triggered multistage multi-channel switch （LTS） was designed according to the hypothesis that the well-proportioned electrical field distribution is helpful in reducing the jitter of delay. Field distribution in the switch section is regulated by a metal field regulation ring and several gradient rings. In order to reduce the jitter further, a SFB/N2 mixture is chosen as the switching medium. The generalized standard deviation of the self-breakdown voltage and the deviation of the average value from the prediction is less than 4.4% and 13% respectively. Linearity of the self-breakdown voltage is better than 0.95. Triggered by a laser pulse of 35 mJ/3 ns, the delay is about 26 ns at a working voltage of 85±3% USB （Self-breakdown Voltage）. Maximum deviation of delay is less than =t=2.5 ns. Jitter is less than 1.5 ns. The delay and jitter decrease with the increase in the working ratio （the ratio of working voltage to USB）, pressure or voltage.
文摘With the increase of link rate, the arbitrator of centralized switch fabric becomes too complicated to implement. A parallel switch fabric based on crossbar, named as PSFBC (Parallel Switch Fabric Based on Crossbar), has been proposed in this paper. PSFBC is composed of k switches whose rate is 1/k of link', these switches exchange cells in parallel; this increases the arbitrator's period and make it easy to implement. Load is evenly distributed to each switch with FCFS (First Come First Serve) rule, it can keep the order of cells in one stream. A multi-class queue scheduling policy is used in PSFBC to ensure the quality of realtime streams. Experiments show that the load on each switch in PSFBC is well balanced, its average delay of cells is little and its performance is very close to centrali{ed switch; and with the increase of number of parallel switches, the loss of PSFBC's performance keeps very small, it becomes easier to implement.
文摘In this paper, an Independent Window-Access(IWA) scheme is proposed, and the performance of an input-buffered ATM switching fabric with the IWA scheme is analysed by means of a probability generating function approach, the closed formulas of the average cell delay and the maximum throughput are given, and results show that the IWA scheme makes the switching fabric have better performances than traditional window-access scheme. The computer simulation results are in good agreement with these analytical results.
文摘This paper analyses the performance of the ATM switch fabric with Combined-Input/ Output Buffering(C-IOB) under two different service principles for the cells at the head of line (HOL) positions of input buffers: First Come First Service (FCFS)/Random Service(RS) for the set of HOL cells addressed to a given output port with different/same "age" (the waiting time at the HOL position) and Pure Random Service(PRS) for all HOL cells addressed to a given output port regardless of their "ages" while the Queue Loss (QL) transfer scheme is adopted for interaction between input and output buffers in the ATM switch fabric. The results obtained show that the C-IOB ATM switch fabric with PRS service policy and the QL transfer scheme is better than other buffering ATM switch fabrics.
基金Funded by the National Basic Research Program of China (No.2007CB307102)National High Tech Research and Development Program of China (No.2005AA121210)National Natural Science Foundation of China (No. 60572042)
文摘Current MSM switching fabric has poor performance under unbalanced traffic. This paper presents an alternative, novel Central-stage Buffered Three-stage Clos switching (CB-3Clos) fabric and proves that this fabric can emulate output queuing switch without any speedup. By analyzing the condition to satisfy the central-stage load-balance, this paper also proposes a Central-stage Load-balanced-based Distributed Scheduling algorithm (CLDS) for CB-3Clos. The results show that, compared with Concurrent Round-Robin based Dispatching (CRRD) algorithm based on MSM, CLDS algorithm has high throughput irrespective with the traffic model and better performance in mean packet delay.
基金the High Technology Research and Development Programme of china.
文摘In this paper,the functions and the architecture of an ATM exchange are summarized.The switching fabrics,the line interface module and the control module are discussed in de-tail.An ATM switching system that adopts the scheme described in this paper has been de-veloped.
文摘Most high-end switches use an input-queued or a combined input- and output-queued architecture. The switch fabrics of these architectures commonly use an iterative scheduling system such as iSLIP. Iterative schedulers are not very scalable and can be slow. We propose a new scheduling algorithm that finds a maximum matching of a modified I/O mapping graph in a single iteration (hence noniterative). Analytically and experimentally, we show that it provides full throughput and incurs very low delay;it is fair and of low complexity;and it outperforms traditional iterative schedulers. We also propose two switch architectures suited for this scheduling scheme and analyze their hardware implementations. The arbiter circuit is simple, implementing only a FIFO queue. Only half as many arbiters for an iterative scheme are needed. The arbiters operate in complete parallel. They work for both architectures and make the hardware implementations sim-ple. The first architecture uses conventional queuing structure and crossbar. The second one uses separate memories for each queue at an input port and a special crossbar. This crossbar is simple and also has a re-duced diameter and distributed structure. We also show that the architectures have good scalability and re-quire almost no speedup.
基金the Science and Technology Commission of Shanghai Municipality(No.20JC1414900)the National Natural Science Foundation of China(Nos.52161145406,51972056,52002061)the Fundamental Research Funds for the Central Universities(No.2232023D-03).
文摘On-demand color switching systems that utilize synchronized semiconductor-catalyzed reduction and photothermal-accelerated oxidation in liquid/solid are highly appealing.Herein,on-demand single/multi-color switching fabrics have been constructed by using defective SnO_(2):Sb-based color switching systems.SnO_(2):Sb nanocrystals with the suitable doping concentration accord lattices with abundant free electrons,conferring high photocatalytic and photothermal performances.A well-crafted set of dual light-responsive semiconductor-catalyzed systems with rapid color change can be attained via the homogenous mixture of SnO_(2):Sb with suitable redox dyes to produce single-color(RGB(red,green,blue))and multi-color transitioning(purple and green)systems.The illumination of these systems by 450 nm light triggers rapid photocatalytic discoloration,while irradiation by 980 nm light confers the photothermal effect that accelerates recoloration in air.Besides,the inks can be extended to rewritable fabrics by embedding the nanocrystals and redox dyes into hydroxyethyl cellulose(as the polymer matrix)and then coating on hydrophobic cotton fabrics to produce photo-switchable fabrics with excellent single/multi-color response.By exploiting the dual light interactions with the semiconductor-mediated systems,various images/letters can be remotely printed and erased on the rewritable fabrics which show promise for potential applications as information storage media and visual sensors.Importantly,the present rewritable fabric shows good stability and reversibility.The present work provides insights into the development of novel color-switching materials.
基金the National Natural Science Foundation of China under Grant No.60572042(国家自然科学基金)the National High-Tech Research and Development Plan of China under Grant No.2005AA121210(国家高技术研究发展计划(863))the National Basic Research Program of China under Grant No.2007CB307102(国家重点基础研究发展计划(973))
文摘调度策略是核心路由交换设备性能的重要保证.针对联合输入交叉节点排队(combined input and cross-point queuing,简称CICQ)交换结构现有调度策略在复杂度或性能方面存在的缺陷,深入探讨了CICQ交换结构调度策略设计的基本准则,并提出了CICQ下虚拟通道的概念.基于基本准则和虚拟通道概念,提出一种简单、高效和公平服务的动态轮询调度策略——FDR(fair service and dynamic round robin).其算法复杂度为O(1),具有良好的可扩展性;并依据虚拟通道的状态为其分配调度份额,具有良好的动态实时性能,能够适应流量负载非均衡的网络环境.SPES(switching performance evaluation systcm)仿真结果表明,该算法具有良好的时延、吞吐量和抗突发性能.
