Influence of earthquake ground motion incoherency on multi-support structures

A linear response history analysis method is used to determine the influence of three factors:geometric incoherency,wave-passage,and local site characteristics on the response of lnulti-support structures subjected to differential ground motions.A one-span frame and a reduced model of a 24-span bridge,located in Las Vegas,Nevada are studied,in which the influence of each of the three factors and their combinations are analyzed.It is revealed that the incoherency of earthquake ground motion can have a dramatic influence on structural response by modifying the dynamics response to uniform excitation and inducing pseudo-static response,which does not exist in structures subjected to uniform excitation.The total response when all three sources of ground motion incoherency are included is generally larger than that of uniform excitation.

Experimental Investigation and Optimization Design of Multi-Support Pipeline System

The design of aircraft hydraulic pipeline system is limited by many factors,such as the integrity of aviation structure or narrow installation space,so the limited clamp support position should be considered.This paper studied the frequency adjustment and dynamic responses reduction of the multi-support pipeline system through experiment and numerical simulation.To avoid the resonance of pipeline system,we proposed two different optimization programs,one was to avoid aero-engine working range,and another was to avoid aircraft hydraulic pump pulsation range.An optimization method was introduced in this paper to obtain the optimal clamp position.The experiments were introduced to validate the optimization results,and the theoretical optimization results can agree well with the test.With regard to avoiding the aero-engine vibration frequency,the test results revealed that the first natural frequency was far from the aero-engine vibration frequency.And the dynamic frequency sweep results showed that no resonance occurred on the pipeline in the engine vibration frequency range after optimization.Additionally,with regard to avoiding the pump vibration frequency,the test results revealed that natural frequencies have been adjusted and far from the pump vibration frequency.And the dynamic frequency sweep results showed that pipeline under optimal clamp position cannot lead to resonance.The sensitivity analysis results revealed the changing relationships between different clamp position and natural frequency.This study can provide helpful guidance on the analysis and design of practical aircraft pipeline.

A new spatial coherence model and analytical coeffi cients for multi-support response spectrum combination

In this paper, a new spatial coherence model of seismic ground motions is proposed by a fitting procedure. The analytical expressions of modal combination （correlation） coefficients of structural response are developed for multi-support seismic excitations. The coefficients from both the numerical integration and analytical solutions are compared to verify the accuracy of the solutions. It is shown that the analytical expressions of numerical modal combination coefficients are of high accuracy. The results of random responses of an example bridge show that the analytical modal combination coefficients developed in this paper are accurate enough to meet the requirements needed in practice. In addition, the computational efficiency of the analytical solutions of the modal combination coefficients is demonstrated by the response computation of the example bridge. It is found that the time required for the structural response analysis by using the analytical modal combination coefficients is less than 1/20 of that using numerical integral methods.

Research on the random seismic response analysis for multi- and large-span structures to multi-support excitations

The pseudo excitation method(PEM) has been improved into a more practical form,on which the analytic formulae of seismic response power spectral density(PSD) of simplified large-span structural models have been derived.The analytic formulae and numerical computing results of seismic response PSD have been derived to study the mechanism of multi-support excitation effects,such as the wave-passage effect and incoherence effect,for the seismic response of multiand large-span structures.By using a multi-span truss as an example,the influence of multi-support excitation effects on the seismic response of such structures is studied.

Seismic response of large-span spatial structures under multi-support and multidimensional excitations including rotational components

To achieve rational and precise seismic response predictions of large span spatial structures(LSSSs),the inherent non-uniformity and multidimensionality characteristics of earthquake ground motions should be properly taken into consideration.However,due to the limitations of available earthquake stations to record seismic rotational components,the effects of rocking and torsional earthquake components are commonly neglected in the seismic analyses of LSSSs.In this study,a newly developed method to extract the rocking and torsion components at any point along the area of a deployed dense array from the translational earthquake recordings is applied to obtain the rotational seismic inputs for a LSSS.The numerical model of an actual LSSS,the Dalian International Conference Center(DICC),is developed to study the influences of multi-support and multidimensional excitations on the seismic responses of LSSSs.The numerical results reveal that the non-uniformity and multidimensionality of ground motion input can considerably affect the dynamic response of the DICC.The specific degree of influence on the overall and local structural displacements,deformations and forces are comprehensively investigated and discussed.

The Liner Formulas between the Supporting Force and Axis Warp of Large-scale Rotary Kiln with Multi-support

Kilns are the key equipment in the metallurgy,architectural and chemistry industry. It is the statically indeterminate system with over load, large torque and multi-support. The kiln move axis warp resulting in that the load distribution is asymmetry, cause many mechanical failure and safe accidents and the interruption of the produce, which bring a great losses. Treating the distribution of the kiln load and the complexity of the stiffness change, the all-purpose model and matrix, used to solve the variable-stiffness beam upon complex load, are established in this paper. The resultant force of kiln in vertical and horizontal direction is calculated. Accordingly, the liner formulas for calculating the supporting force of the support wheels are obtained, and the wheel supporting force also can be easily obtained based on each shell warp. This will provide theory conference for safety management and rational maintenance.

Seismic Response Analysis of Long-Span Suspen-Dome under Multi-Support Excitations

A practical suspen-dome project, Changzhou Gym roof, is adopted as an example and its transient analysis based on the multi-support excitations of the earthquake wave is carried out. Compared with the single support excitation, the position and value of the maximum stress under multi-support excitations both change and the amount of elements with obvious changes is large and more than 70% of the total. Moreover, when other terms are not changed, this influence will decrease as the span decreases, but increase as the traveling wave speed decreases. The final result indicates that the influence of the earthquake wave passage effect on the structure system is negative and cannot be ignored.

Nonlinear analysis of pounding between decks of multi-span bridge subjected to multi-support and multi-dimensional earthquake excitation

The nonlinear analysis of pounding between bridge deck segments subjected to multi-support excitations and multi-dimensional earthquake motion was performed.A novel bottom rigid element(BRE)method of the current displacement input model for structural seismic analysis under the multi-support excitations was used to calculate structural dynamic response.In the analysis,pounding between adjacent deck segments was considered.The seismic response of a multi-span bridge subjected to the multi-support excitation,considering not only the traveling-wave effect and partial coherence effect,but also the seismic non-stationary characteristics of multi-support earthquake motion,was simulated using finite element method(FEM).Meanwhile,the seismic response of the bridge under uniform earthquake was also analyzed.Finally,comparative analysis was conducted and some calculation results were shown for pounding effect,under multi-dimensional and multi-support earthquake motion,when performing seismic response analysis of multi-span bridge.Compared with the case of uniform/multi-support/multi-support and multi-dimensional earthquake input,the maximum values of pounding force in the case of multi-support and multi-dimensional earthquake input increase by about 5 8 times;the absolute value of bottom moment and shear force of piers increase by about50%600%and 23.1%900%,respectively.A conclusion can be given that it is very necessary to consider the pounding effect under multi-dimensional and multi-support earthquake motion while performing seismic response analysis of multi-span bridge.

多源视频数据驱动的舰面保障作业三维重建

针对现有公开的航母舰面保障作业视频数据碎片化、相机角度多变、像素质量低下等问题,提出一种多源视频数据驱动的舰面保障作业三维重建方法.该方法首先对视频中对象轨迹方向进行预测,并采用联合外观和方向相似度的跟踪方法实现视频数据的多目标轨迹跟踪;然后基于跟踪结果,依次采用相似度关联、特征轨迹分割、轨迹聚类提取多源数据中的保障作业对象并进行关联与融合;最后对融合得到的轨迹进行逼真三维重建.在MOT20数据集和舰面保障作业公开视频数据上,实验和用户调研数据的t检验结果表明,采用所提方法有99.5%的把握得到可信的舰面保障作业三维重建效果.

跨走滑断层多跨简支梁桥地震反应特征与参数分析

为揭示跨走滑断层多跨简支梁桥的地震响应规律,以1座4跨简支梁桥为研究对象,基于OpenSees建立了3维动力弹塑性分析模型;采用“分解-叠加”法合成40组跨断层地震动,以多点激励的方式输入到建立的动力分析模型,进行非线性动力时程分析,研究了跨走滑断层多跨简支梁桥在地震动作用下的地震反应特征,分析了断层的穿越角度和穿越位置对跨走滑断层多跨简支梁桥地震响应的影响。结果表明:地震动作用下跨走滑断层桥梁结构会发生剧烈的位移反应;断层穿越角度和穿越位置对桥梁地震反应有显著的影响;地震动作用下跨断层简支梁桥的扭转效应不可忽视。

三层正放四角锥预应力网架稳定性分析

网架以其优良的工程性能成为大跨度结构的首选结构类型之一。为改善传统网架结构在大跨度条件下变形大、用钢量大的缺陷,文中通过对网架施加预应力的方式,达到增强结构整体刚度和承载能力的目的。预应力的施加必然会对网架的稳定性能造成影响,其中支承形式对网架结构的稳定性影响较大。并通过对网架施加不同预应力后进行稳定性分析,得到不同预应力布索方式对网架稳定性影响,为网架的实际工程建设提供参考。

大口径反射镜Bipod支撑结构的装调与检测方法

随着我国遥感卫星对地观测分辨率的不断提升,空间遥感相机的有效口径逐步增大,为有效应对相机在地表装调时的重力误差干扰,大口径遥感相机的装调方式逐步从光轴水平形式转变为光轴竖直形式,与之对应的,相机主反射镜支撑结构与装配需求也在不断革新。为满足反射镜支撑与减重需求,在1 m及以上口径的反射镜支撑形式中,Bipod结构是较为常见的一种结构形式,不同于传统的框式支撑形式,它在光机结构粘接与结构位置标定需求上都有了巨大变革。为保证Bipod支撑结构下反射镜的装配定位精度和面形变化满足系统指标要求,提出了一种结合多目标空间位置转换和Stewart结构运动反演的大口径反射镜组件装调方法,该方法可在有效保证光机结构粘接点精度的同时,仅依靠反射镜自身支撑结构,实现反射镜与主承力板之间的高精度六维调节,系统装调误差可控制在0.04 mm左右。在遥感相机的实际装调过程中,通过分析主反射镜在系统中的装调误差区间,并以此为标准制定了反射镜Bipod结构的定位、粘接、调整和检测方案,实践结果表明该方法可有效控制反射镜的装配定位精度和面形误差,装调结果能够满足大口径遥感相机的系统成像需求。

基于多层全连接神经网络的6C地震波极化向量识别研究

利用机器学习原理,提出一种基于多层全连接(multi-layer fully connected, MFC)神经网络的六分量(six-component, 6C)地震波极化向量识别方法。首先利用6C地震波各波型极化向量数学模型和一系列仿真参数得到5种波型和噪声波型各5 000个极化向量数据集,然后随机选取其中5 000个作为测试集,其余划分为训练集,进行MFC神经网络与支持向量机(support vector machine, SVM)的综合辨识性能对比实验。结果表明,MFC神经网络模型识别5种极化向量类型(SH波和Love波视为一类)和6种极化向量类型的效果均显著优于SVM模型,平均识别率分别达到99.786%和87.940%。

Vibration test and analysis of Laoshan bicycle gymnasium for the Olympic Games under multi-support excitations

The vibration tests of Laoshan bicycle gymnasium for the Olympic Games are performed under multi-support excitations in order to verify the effectiveness of multi-support time history method. The excitation sources come from the impact forces acting on the ring beam of the reticulated structure, on the basis of which the records of motions of each excited point and corresponding structural vibration responses are all collected. The theoretical analytical model of the structure is further established and the structural dynamic responses are obtained subjected to the same excitation case via multi-support time history method. The calculation results are generally in agreement with those of the test in both time domain and frequency domain, which verify the effectiveness of multi-support time history method. The vibration test can also provide references for long-span structures under multi-support excitations.

基于多层耦合网络的装备保障体系级联失效及抗毁性分析

为准确描述装备保障体系结构特征与毁伤失效流程,进而提升装备保障体系功能与抗毁能力,基于杀伤层、保障层和储供层构建装备保障体系的多层耦合网络模型。基于杀伤链给出装备维修保障链与储供保障链的特征和典型样式,在此基础上,提出考虑装备保障体系多层耦合网络特性的级联失效模型与节点重要度评估方法。给出对应的网络抗毁性评估指标。仿真结果表明,考虑级联失效的多层耦合网络模型能较好地反映遭受攻击时整个装备保障体系的性能变化情况,所提出的使命任务节点重要度能准确识别关键节点。与传统网络抗毁性指标相比,杀伤链数量对节点失效产生的装备保障体系抗毁性变化更加敏感。

基于改进修正动员强度设计方法的软土基坑围护结构侧移预测

为了进一步优化软土地区基坑设计方法,提升基坑支护体系的安全性与经济性,在已有研究的基础上,根据工程实践经验,修正了MSD法和其改进方法 (MMSD法).基于圆弧滑动模式提出更符合实际的塑性变形机制,引入基坑开挖主要影响深度来量化位移场尺寸.理论计算方法适用于分析软黏土地区多支点式柔性支护结构的基坑开挖全过程的变形预测.将该方法的计算结果与6个上海地区的基坑工程实测数据、弹性支点法的计算结果及MMSD法的计算结果进行对比分析.对不同开挖阶段的围护结构最大侧移和最大侧移深度进行参数分析.结果表明,利用该方法得到的预测值与实测值吻合效果更佳,预测精度高于弹性支点法和MMSD法,证明了该方法的实用性.

考虑多失效模式的桩锚结构鲁棒性设计及经济性优化

目的 研究岩土力学参数的不确定性对桩锚支护体系的整体影响,探究经济性和鲁棒性共同作用的优化设计。方法 选取黄土地区工程案例,考虑支护桩隆起破坏、支护桩倾覆破坏、整体稳定性破坏三类破坏形式,使用蒙特卡洛及点估计法嵌套的方式求出不同设计组合下的失效概率及标准差;同时考虑优化设计的经济性,筛选出桩锚支护结构体系的鲁棒性优化设计方案。结果 随着桩长增加,主控模式由隆起破坏向整体稳定性改变,不同的几何参数对结构鲁棒性影响不同,优化后可以获得同时满足经济性、鲁棒性及可靠度要求的最佳设计方案。结论 在桩锚结构设计中考虑经济性优化及多失效模式的鲁棒性设计是必要的。

覆水峡谷-丘陵复合地貌的地震差动相干函数模型及规律特征与影响

构建了覆水峡谷-丘陵复合地貌的地震差动模拟所需的相干函数模型。首先,提出并推导得到了考虑土体滤波效应和竖向距离的覆水峡谷-丘陵复合地貌相干函数模型表达式;探讨并阐述了相干性变化的规律特征及其物理本质。然后,基于新相干模型和传递函数构建地下功率谱矩阵,生成地下多点地震动;通过功率谱及相干函数拟合验证了模拟结果的科学性与合理性;对比分析了本研究提出的相干函数模型对多点地震动空间变异性的影响。最后,以一座连续刚构桥为例,探讨了新相干函数模型对结构地震差动响应的影响。结果表明:基于新相干函数模型的多点地震动相干性降低,各点地震动的空间变异性增大,进而加剧了结构各支承点运动的不同步性,最终导致结构地震差动响应增大。

基于改进多输出支持向量的船舶航迹预测

为保障智能船舶快速、安全、可靠地进行避碰工作,提出了一种基于改进樽海鞘群算法(salp swarm algorithm,SSA)的多输出支持向量的船舶航迹预测模型。本文采用的多输出支持向量模型可以对船舶进行整体建模,所构建的模型可以对船舶航迹状态进行多输出预测,对于模型中存在的超参数采用改进的SSA进行寻优,算法加入了自适应权重与离群象算法,避免了算法早熟与高维易陷入局部最优的问题。最后,实验选取了实测数据对所提方法进行验证,并与其他常见模型进行对比实验,结果表明了所提方法的可行性与有效性。

带悬臂的张弦梁拉索-支座节点力学性能研究

为得到带悬臂的张弦梁拉索-支座复杂节点在不同工况下的力学性能变化规律,以及在设计荷载组合下的破坏模式,结合某大跨度张弦梁实际工程,通过建立多尺度有限元模型以及现场试验的方法研究了该节点在张拉过程中的应力、应变分布特征;通过局部节点有限元分析得到了节点的极限承载能力及破坏模式;并针对其受力特征对节点构造及壁厚进行优化。结果表明在施工及使用阶段,该节点应力均处于弹性范围内,满足力学性能要求;节点的破坏荷载约为设计荷载组合的3.2倍,破坏模式为耳板上拉索孔区域受拉破坏;优化后节点的应力分布更加均匀且合理,承载能力提高。