Intelligent architecture modeling for multilevel fluvial reservoirs based on architecture interface and elements

At present,the architecture modeling method of fluvial reservoirs are still developing.Traditional methods usually use grids to characterize architecture interbeds within the reservoir.Due to the thin thickness of this type of the interlayers,the number of the model grids must be greatly expanded.The number of grids in the tens of millions often makes an expensive computation;however,upscaling the model will generate a misleading model.The above confusion is the major reason that restricts the largescale industrialization of fluvial reservoir architecture models in oilfield development and production.Therefore,this paper explores an intelligent architecture modeling method for multilevel fluvial reservoirs based on architecture interface and element.Based on the superpositional relationship of different architectural elements within the fluvial reservoir,this method uses a combination of multilevel interface constraints and non-uniform grid techniques to build a high-resolution 3D geological model for reservoir architecture.Through the grid upscaling technology of heterogeneous architecture elements,different upscaling densities are given to the lateral-accretion bedding and lateral-accretion bodies to simplify the model gridding.This new method greatly reduces the number of model grids while ensuring the accuracy of lateral-accretion bedding models,laying a foundation for large-scale numerical simulation of the subsequent industrialization of the architecture model.This method has been validated in A layer of X oilfield with meandering fluvial channel sands as reservoirs and B layer of Y oilfield with braided river sands as reservoirs.The simulation results show that it has a higher accuracy of production history matching and remaining oil distribution forecast of the targeted sand body.The numerical simulation results show that in the actual development process of oilfield,the injected water will not displace oil in a uniform diffusive manner as traditionally assumed,but in a more complex pattern with oil in upper part of sand body being left behind as residual oil due to the influences of different levels of architecture interfaces.This investigation is important to guiding reservoir evaluation,remaining oil analysis,profile control and potential tapping and well pattern adjustment.

Battlefield target intelligence system architecture modeling and system optimization

To address the current problems of poor generality,low real-time,and imperfect information transmission of the battlefield target intelligence system,this paper studies the battlefield target intelligence system from the top-level perspective of multi-service joint warfare.First,an overall planning and analysis method of architecture modeling is proposed with the idea of a bionic analogy for battlefield target intelligence system architecture modeling,which reduces the difficulty of the planning and design process.The method introduces the Department of Defense architecture framework(DoDAF)modeling method,the multi-living agent(MLA)theory modeling method,and other combinations for planning and modeling.A set of rapid planning methods that can be applied to model the architecture of various types of complex systems is formed.Further,the liveness analysis of the battlefield target intelligence system is carried out,and the problems of the existing system are presented from several aspects.And the technical prediction of the development and construction is given,which provides directional ideas for the subsequent research and development of the battlefield target intelligence system.In the end,the proposed architecture model of the battlefield target intelligence system is simulated and verified by applying the colored Petri nets(CPN)simulation software.The analysis demonstrates the reasonable integrity of its logic.

An Interpretable Light Attention-Convolution-Gate Recurrent Unit Architecture for the Highly Accurate Modeling of Actual Chemical Dynamic Processes

To equip data-driven dynamic chemical process models with strong interpretability,we develop a light attention–convolution–gate recurrent unit(LACG)architecture with three sub-modules—a basic module,a brand-new light attention module,and a residue module—that are specially designed to learn the general dynamic behavior,transient disturbances,and other input factors of chemical processes,respectively.Combined with a hyperparameter optimization framework,Optuna,the effectiveness of the proposed LACG is tested by distributed control system data-driven modeling experiments on the discharge flowrate of an actual deethanization process.The LACG model provides significant advantages in prediction accuracy and model generalization compared with other models,including the feedforward neural network,convolution neural network,long short-term memory(LSTM),and attention-LSTM.Moreover,compared with the simulation results of a deethanization model built using Aspen Plus Dynamics V12.1,the LACG parameters are demonstrated to be interpretable,and more details on the variable interactions can be observed from the model parameters in comparison with the traditional interpretable model attention-LSTM.This contribution enriches interpretable machine learning knowledge and provides a reliable method with high accuracy for actual chemical process modeling,paving a route to intelligent manufacturing.

Time Predictable Modeling Method for GPU Architecture with SIMT and Cache Miss Awareness

Graphics Processing Units(GPUs)are used to accelerate computing-intensive tasks,such as neural networks,data analysis,high-performance computing,etc.In the past decade or so,researchers have done a lot of work on GPU architecture and proposed a variety of theories and methods to study the microarchitectural characteristics of various GPUs.In this study,the GPU serves as a co-processor and works together with the CPU in an embedded real-time system to handle computationally intensive tasks.It models the architecture of the GPU and further considers it based on some excellent work.The SIMT mechanism and Cache-miss situation provide a more detailed analysis of the GPU architecture.In order to verify the GPU architecture model proposed in this article,10 GPU kernel_task and an Nvidia GPU device were used to perform experiments.The experimental results showed that the minimum error between the kernel task execution time predicted by the GPU architecture model proposed in this article and the actual measured kernel task execution time was 3.80%,and the maximum error was 8.30%.

Exploration of Graduate Student Cultivation Mode of Landscape Architecture under the Background of“Artificial Intelligence+X”

Under the background of“artificial intelligence+X”,the development of landscape architecture industry ushers in new opportunities,and professional talents need to be updated to meet the social demand.This paper analyzes the cultivation demand of landscape architecture graduate students in the context of the new era,and identifies the problems by comparing the original professional graduate training mode.The new cultivation mode of graduate students in landscape architecture is proposed,including updating the target orientation of the discipline,optimizing the teaching system,building a“dualteacher”tutor team,and improving the“industry-university-research-utilization”integrated cultivation,so as to cultivate high-quality compound talents with disciplinary characteristics.

Ripple-effect analysis for operational architecture of air defense systems with supernetwork modeling

In order to solve the problem that the ripple-effect analy- sis for the operational architecture of air defense systems （OAADS） is hardly described in quantity with previous modeling approaches, a supernetwork modeling approach for the OAADS is put for- ward by extending granular computing. Based on that operational units and links are equal to different information granularities, the supernetwork framework of the OAADS is constructed as a “four- network within two-layer” structure by forming dynamic operating coalitions, and measuring indexes of the ripple-effect analysis for the OAADS are given combining with Laplace spectral radius. In this framework, via analyzing multidimensional attributes which inherit relations between operational units in different granular scales, an extended granular computing is put forward integrating with a topological structure. Then the operation process within the supernetwork framework, including transformation relations be- tween two layers in the vertical view and mapping relations among functional networks in the horizontal view, is studied in quantity. As the application case shows, comparing with previous modeling approaches, the supernetwork model can validate and analyze the operation mechanism in the air defense architecture, and the ripple-effect analysis can be used to confirm the key operational unit with micro and macro viewpoints.

High level architecture evolved modular federation object model

To improve the agility, dynamics, composability, reusability, and development efficiency restricted by monolithic federation object model （FOM）, a modular FOM is proposed by high level architecture （HLA） evolved product development group. This paper reviews the state-of-the-art of HLA evolved modular FOM. In particular, related concepts, the overall impact on HLA standards, extension principles, and merging processes are discussed. Also permitted and restricted combinations, and merging rules are provided, and the influence on HLA interface specification is given. The comparison between modular FOM and base object model （BOM） is performed to illustrate the importance of their combination. The applications of modular FOM are summarized. Finally, the significance to facilitate compoable simulation both in academia and practice is presented and future directions are pointed out.

An executable modeling and analyzing approach to C4ISR architecture

To analyze the behavioral model of the command,control,communication,computer,intelligence,surveillance,reconnaissance(C4ISR)architecture,we propose an executable modeling and analyzing approach to it.First,the meta concept model of the C4ISR architecture is introduced.According to the meta concept model,we construct the executable meta models of the C4ISR architecture by extending the meta models of fUML.Then,we define the concrete syntax and executable activity algebra(EAA)semantics for executable models.The semantics functions are introduced to translating the syntax description of executable models into the item of EAA.To support the execution of models,we propose the executable rules which are the structural operational semantics of EAA.Finally,an area air defense of the C4ISR system is used to illustrate the feasibility of the approach.

Model architecture-oriented combat system effectiveness simulation based on MDE

Combat system effectiveness simulation (CSES) is a special type of complex system simulation. Three non-functional requirements (NFRs), i.e. model composability, domain specific modeling, and model evolvability, are gaining higher priority from CSES users when evaluating different modeling methodologies for CSES. Traditional CSES modeling methodologies are either domain-neutral (lack of domain characteristics consideration and limited support for model composability) or domain-oriented (lack of openness and evolvability) and fall short of the three NFRs. Inspired by the concept of architecture in systems engineering and software engineering fields, we extend it into a concept of model architecture for complex simulation systems, and propose a model architecture-oriented modeling methodology in which the model architecture plays a central role in achieving the three NFRs. Various model-driven engineering (MDE) approaches and technologies, including simulation modeling platform (SMP), unified modeling language (UML), domain specific modeling (DSM), eclipse modeling framework (EMF), graphical modeling framework (GMF), and so forth, are applied where possible in representing the CSES model architecture and its components' behaviors from physical and cognitive domain aspects. A prototype CSES system, called weapon effectiveness simulation system (WESS), and a non-trivial air-combat simulation example are presented to demonstrate the methodology.

Ultra-lightweight CNN design based on neural architecture search and knowledge distillation: A novel method to build the automatic recognition model of space target ISAR images

In this paper,a novel method of ultra-lightweight convolution neural network(CNN)design based on neural architecture search(NAS)and knowledge distillation(KD)is proposed.It can realize the automatic construction of the space target inverse synthetic aperture radar(ISAR)image recognition model with ultra-lightweight and high accuracy.This method introduces the NAS method into the radar image recognition for the first time,which solves the time-consuming and labor-consuming problems in the artificial design of the space target ISAR image automatic recognition model(STIIARM).On this basis,the NAS model’s knowledge is transferred to the student model with lower computational complexity by the flow of the solution procedure(FSP)distillation method.Thus,the decline of recognition accuracy caused by the direct compression of model structural parameters can be effectively avoided,and the ultralightweight STIIARM can be obtained.In the method,the Inverted Linear Bottleneck(ILB)and Inverted Residual Block(IRB)are firstly taken as each block’s basic structure in CNN.And the expansion ratio,output filter size,number of IRBs,and convolution kernel size are set as the search parameters to construct a hierarchical decomposition search space.Then,the recognition accuracy and computational complexity are taken as the objective function and constraint conditions,respectively,and the global optimization model of the CNN architecture search is established.Next,the simulated annealing(SA)algorithm is used as the search strategy to search out the lightweight and high accuracy STIIARM directly.After that,based on the three principles of similar block structure,the same corresponding channel number,and the minimum computational complexity,the more lightweight student model is designed,and the FSP matrix pairing between the NAS model and student model is completed.Finally,by minimizing the loss between the FSP matrix pairs of the NAS model and student model,the student model’s weight adjustment is completed.Thus the ultra-lightweight and high accuracy STIIARM is obtained.The proposed method’s effectiveness is verified by the simulation experiments on the ISAR image dataset of five types of space targets.

Process Mining Discovery Techniques for Software Architecture Lightweight Evaluation Framework

This research recognizes the limitation and challenges of adaptingand applying Process Mining as a powerful tool and technique in theHypothetical Software Architecture (SA) Evaluation Framework with thefeatures and factors of lightweightness. Process mining deals with the largescalecomplexity of security and performance analysis, which are the goalsof SA evaluation frameworks. As a result of these conjectures, all ProcessMining researches in the realm of SA are thoroughly reviewed, and ninechallenges for Process Mining Adaption are recognized. Process mining isembedded in the framework and to boost the quality of the SA model forfurther analysis, the framework nominates architectural discovery algorithmsFlower, Alpha, Integer Linear Programming (ILP), Heuristic, and Inductiveand compares them vs. twelve quality criteria. Finally, the framework’s testingon three case studies approves the feasibility of applying process mining toarchitectural evaluation. The extraction of the SA model is also done by thebest model discovery algorithm, which is selected by intensive benchmarkingin this research. This research presents case studies of SA in service-oriented,Pipe and Filter, and component-based styles, modeled and simulated byHierarchical Colored Petri Net techniques based on the cases’ documentation.Processminingwithin this framework dealswith the system’s log files obtainedfrom SA simulation. Applying process mining is challenging, especially for aSA evaluation framework, as it has not been done yet. The research recognizesthe problems of process mining adaption to a hypothetical lightweightSA evaluation framework and addresses these problems during the solutiondevelopment.

Interpretation,Construction and Exhibition-Seeking the Positive Significance of Ancient Architecture Model Making in the Teaching of History of Chinese Architecture

On the basis of a special project for teaching reform, in order to change the boring and dull situation of History of Chinese Architecture in students, ancient architecture model was introduced in the teaching process of the pure history course. Through the interpretation, construction, and exhibition stages,the ability of students in grasping the knowledge of architecture history can be strengthened. Then, from the historical background, physical composition, artistic conception of space, structural system, detailed structure, and architectural evolution, the positive significance of ancient architecture model to the teaching of the History of Chinese Architecture was discussed, in the hope of providing certain theoretical basis for the teaching of the History of Chinese Architecture.

ARCHITECTURE MODEL AND RESOURCE GRAPH BUILDING ALGORITHM FOR DETAILED FPGA ARCHITECTURE DESIGN

This paper addresses the issue of designing the detailed architectures of Field-Programmable Gate Arrays(FPGAs), which has a great impact on the overall performances of an FPGA in practice. Firstly, a novel FPGA architecture description model is proposed based on an easy-to-use file format known as YAML. This format permits the description of any detailed architecture of hard blocks and channels. Then a general algorithm of building FPGA resource graph is presented. The proposed model is scalable and capable of dealing with detailed architecture design and can be used in FPGA architecture evaluation system which is developed to enable detailed architecture design. Experimental results show that a maximum of 16.36% reduction in total wirelength and a maximum of 9.34% reduction in router effort can be obtained by making very little changes to detailed architectures, which verifies the necessity and effectiveness of the proposed model.

The Value of Section Model Making in the Teaching of Architecture Major in Colleges and Universities

Section model making is an important part of teaching of architecture major in colleges and universities,which can train students’ comprehensive ability and professional quality,and make students meet the needs of the construction industry.In order to ensure the quality of section model making,it is necessary to collect and analyze the data in the early stage to ensure the smooth process of manual production.As far as the production process is concerned,it is necessary to do a good job in the early planning and control of the manual modeling,and pay attention to the coordination and cooperation of the group and the later inspection.

Research on logistics domain-oriented cloud resource management model and architecture

To address the challenges posed by resource shortage or surplus to enterprises productivity,Internet platforms have been widely used,which can balance shortage and surplus in broader environments. However,the existing resource management models lack openness,sharing ability and scalability,which make it difficult for many heterogeneous resources to co-exist in the same system. It is also difficult to resolve the conflicts between distributed self-management and centralized scheduling in the system. This paper analyzes the characteristics of resources in the distributed environment and proposes a new resource management architecture by considering the resource aggregation capacity of cloud computing. The architecture includes a universal resource scheduling optimization model which has been applied successfully in double-district multi-ship-scheduling multi-container-yard empty containers transporting of international shipping logistics. Applications in all these domains prove that this new resource management architecture is feasible and can achieve the expected effect.

Service Model and Architecture for Beyond 3G System

Beyond 3G (B3G) system, the future mobile communication system, is envisioned as a user-centric, open, and convergent information infrastructure capable of providing personalized services. It is extremely important to develop service models and architectures for B3G system. A three-dimension service model is proposed. The dimensions are identified as service support scope, service capability definition, and adaptive feature elements. Then, the hierarchical service architecture for B3G is introduced. The enabling technologies for B3G service architecture are discussed in this paper, such as Virtual Home Environment (VHE), service support environment, service openness, distributed computing, intelligent technology, and profile.

APPLICATION OF ARCHITECTURE- BASED NEURAL NETWORKS IN MODELING AND PARAMETER OPTIMIZATION OF HYDRAULIC BUMPER

The dynamic working process of 52SFZ-140-207B type of hydraulic bumper isanalyzed. The modeling method using architecture-based neural networks is introduced. Using thismodeling method, the dynamic model of the hydraulic bumper is established; Based on this model thestructural parameters of the hydraulic bumper are optimized with Genetic algorithm. The result showsthat the performance of the dynamic model is close to that of the hydraulic bumper, and the dynamicperformance of the hydraulic bumper is improved through parameter optimization.

Research on Object Model-Based Architecture for Service Robot System

An object model based software architecture for service robot system is presented, which addresses both software engineering issues such as reuse, extensibility, and management of complexity as well as system engineering issues like scalability, reactivity, and robustness. A novel approach to the service robot system architecture is discussed. Cognitive psychology is considered in designing the software system, i.e., a humans way of vision and planning is applied. The planner can incorporate the users request into its task selection mechanism and generate plans biased toward picking the most reliable task execution in a given situation, and the planner can alter task selection based on changes that occur in dynamic and uncertain environments.

Model Construct Based Enterprise Model Architecture and Its Modeling Approach

In order to support enterprise integration, a kind of model construct based enterprise model architecture and its modeling approach are studied in this paper. First, the structural makeup and internal relationships of enterprise model architecture are discussed. Then, the concept of reusable model construct (MC) which belongs to the control view and can help to derive other views is proposed. The modeling approach based on model construct consists of three steps, reference model architecture synthesis, enterprise model customization, system design and implementation. According to MC based modeling approach a case study with the background of one-kind-product machinery manufacturing enterprises is illustrated. It is shown that proposal model construct based enterprise model architecture and modeling approach are practical and efficient.

Empirically Modeling Enterprise Architecture Using ArchiMate

Enterprise Architecture(EA)has evolved based on the practice of information systems architecture design and implementation.EA is a rigorous description of a structure,and the objectives of EA modeling not only include clarifying corporate strategies,visualizing business processes,and modeling information systems to manage resources but also include improving organizational structures,adjusting information strategies,and creating new business value.Therefore,EA models cover a wide scope that includes both IT and business architectures.Typically,EA modeling is the initial and most important analysis step for researchers,architects,and developers.ArchiMate is the dominant modeling language for EA and it has been shown to improve visualization of EA models.However,few studies have systematically introduced general modeling methods using ArchiMate to meet a broad range of needs and few studies have empirically evaluated the modeling method using ArchiMate.This paper introduces an EA visualization approach to fill that gap and conducts a case study on a wilderness weather station system.Strict controlled experiments are conducted to verify the effectiveness and feasibility of this modeling method,and the experimental results show that this modeling procedure is not only feasible,but also can effectively transform the system metamodel and restore the EA scene.