Differences and identification on multi-time hydrocarbon generation of carboniferous-permian coaly source rocks in the Huanghua Depression,Bohai Bay Basin

Coal is a solid combustible mineral,and coal-bearing strata have important hydrocarbon generation potential and contribute to more than 12%of the global hydrocarbon resources.However,the deposition and hydrocarbon evolution process of ancient coal-bearing strata is characterized by multiple geological times,leading to obvious distinctions in their hydrocarbon generation potential,geological processes,and production,which affect the evaluation and exploration of hydrocarbon resources derived from coaly source rocks worldwide.This study aimed to identify the differences on oil-generated parent macerals and the production of oil generated from different coaly source rocks and through different oil generation processes.Integrating with the analysis of previous tectonic burial history and hydrocarbon generation history,high-temperature and high-pressure thermal simulation experiments,organic geochemistry,and organic petrology were performed on the Carboniferous-Permian(C-P)coaly source rocks in the Huanghua Depression,Bohai Bay Basin.The oil-generated parent macerals of coal's secondary oil generation process(SOGP)were mainly hydrogen-rich collotelinite,collodetrinite,sporinite,and cutinite,while the oil-generated parent macerals of tertiary oil generation process(TOGP)were the remaining small amount of hydrogen-rich collotelinite,sporinite,and cutinite,as well as dispersed soluble organic matter and unexhausted residual hydrocarbons.Compared with coal,the oil-generated parent macerals of coaly shale SOGP were mostly sporinite and cutinite.And part of hydrogen-poor vitrinite,lacking hydrocarbon-rich macerals,and macerals of the TOGP,in addition to some remaining cutinite and a small amount of crude oil and bitumen from SOGP contributed to the oil yield.The results indicated that the changes in oil yield had a good junction between SOGP and TOGP,both coal and coaly shale had higher SOGP aborted oil yield than TOGP starting yield,and coaly shale TOGP peak oil yield was lower than SOGP peak oil yield.There were significant differences in saturated hydrocarbon and aromatic parameters in coal and coaly shale.Coal SOGP was characterized by a lower Ts/Tm and C31-homohopane22S/(22S+22R)and a higher Pr/n C17compared to coal TOGP,while the aromatic parameter methyl dibenzothiophene ratio(MDR)exhibited coaly shale TOGP was higher than coaly shale SOGP than coaly TOGP than coaly SOGP,and coal trimethylnaphthalene ratio(TNR)was lower than coaly shale TNR.Thus,we established oil generation processes and discriminative plates.In this way,we distinguished the differences between oil generation parent maceral,oil generation time,and oil production of coaly source rocks,and therefore,we provided important support for the evaluation,prediction,and exploration of oil resources from global ancient coaly source rocks.

Multi-Time Scale Optimal Scheduling of a Photovoltaic Energy Storage Building System Based on Model Predictive Control

Building emission reduction is an important way to achieve China’s carbon peaking and carbon neutrality goals.Aiming at the problem of low carbon economic operation of a photovoltaic energy storage building system,a multi-time scale optimal scheduling strategy based on model predictive control(MPC)is proposed under the consideration of load optimization.First,load optimization is achieved by controlling the charging time of electric vehicles as well as adjusting the air conditioning operation temperature,and the photovoltaic energy storage building system model is constructed to propose a day-ahead scheduling strategy with the lowest daily operation cost.Second,considering inter-day to intra-day source-load prediction error,an intraday rolling optimal scheduling strategy based on MPC is proposed that dynamically corrects the day-ahead dispatch results to stabilize system power fluctuations and promote photovoltaic consumption.Finally,taking an office building on a summer work day as an example,the effectiveness of the proposed scheduling strategy is verified.The results of the example show that the strategy reduces the total operating cost of the photovoltaic energy storage building system by 17.11%,improves the carbon emission reduction by 7.99%,and the photovoltaic consumption rate reaches 98.57%,improving the system’s low-carbon and economic performance.

基于轻量化PointNet网络的林果园喷雾作业靶标实时识别方法

为了进一步提高喷雾机器人靶标检测的精准性、实时性和应用部署的实用性,该研究提出一种基于轻量化PointNet网络的林果园喷雾作业靶标实时识别方法。首先通过区域提取降采样、地面分割和改进DBSCAN聚类等点云预处理方法提取原始点云中的靶标;然后通过移动最小二乘上采样将靶标点云转化为满足点云识别网络输入要求的点云数据;最终通过在PointNet网络中引入残差模块和改进循环剪枝算法轻量化PointNet网络,完成林果树靶标的实时识别。试验结果表明,在ModelNet40数据集上,轻量化PointNet网络可达89.7%的准确率;在实际苗圃环境的试验中,该研究方法对靶标的识别准确率可达92.49%,同时误识率与拒识率分别为13.4%和6.47%,相较PointNet网络识别准确率提升了4.38个百分点,误识率和拒识率分别降低了7.2和4.07个百分点;轻量化PointNet网络识别准确率仅比PointNet++网络低1.14个百分点,误识率和拒识率分别高了0.9和1.12个百分点。但是轻量化PointNet网络的模型参数量较PointNet网络和PointNet++网络的模型参数量显著减少,仅为PointNet网络的11.5%,PointNet++网络的27.02%;运算量相较PointNet网络、PointNet++网络分别减少13.3和76.79个百分点。该研究提出的轻量化PointNet网络具有较高的实时性、精确性和鲁棒性,能够满足林果园喷雾作业的靶标识别需求,可为林果园喷雾作业靶标实时识别提供参考。

Low-carbon generation expansion planning considering uncertainty of renewable energy at multi-time scales

With the development of carbon electricity,achieving a low-carbon economy has become a prevailing and inevitable trend.Improving low-carbon expansion generation planning is critical for carbon emission mitigation and a lowcarbon economy.In this paper,a two-layer low-carbon expansion generation planning approach considering the uncertainty of renewable energy at multiple time scales is proposed.First,renewable energy sequences considering the uncertainty in multiple time scales are generated based on the Copula function and the probability distribution of renewable energy.Second,a two-layer generation planning model considering carbon trading and carbon capture technology is established.Specifically,the upper layer model optimizes the investment decision considering the uncertainty at a monthly scale,and the lower layer one optimizes the scheduling considering the peak shaving at an hourly scale and the flexibility at a 15-minute scale.Finally,the results of different influence factors on low-carbon generation expansion planning are compared in a provincial power grid,which demonstrate the effectiveness of the proposed model.

Bio-Inspired Optimal Dispatching of Wind Power Consumption Considering Multi-Time Scale Demand Response and High-Energy Load Participation

Bio-inspired computer modelling brings solutions fromthe living phenomena or biological systems to engineering domains.To overcome the obstruction problem of large-scale wind power consumption in Northwest China,this paper constructs a bio-inspired computer model.It is an optimal wind power consumption dispatching model of multi-time scale demand response that takes into account the involved high-energy load.First,the principle of wind power obstruction with the involvement of a high-energy load is examined in this work.In this step,highenergy load model with different regulation characteristics is established.Then,considering the multi-time scale characteristics of high-energy load and other demand-side resources response speed,a multi-time scale model of coordination optimization is built.An improved bio-inspired model incorporating particle swarm optimization is applied to minimize system operation and wind curtailment costs,as well as to find the most optimal energy configurationwithin the system.Lastly,we take an example of regional power grid in Gansu Province for simulation analysis.Results demonstrate that the suggested scheduling strategy can significantly enhance the wind power consumption level and minimize the system’s operational cost.

基于K F-PointNet++的油菜植株点云分割算法

针对传统的点云分割算法精度低、鲁棒性差的问题,提出了基于K近邻算法和特征融合的深度点云网络(point clouds network++based on K-nearest neighbor algorithm and feature fusion,K F-PointNet++)三维点云分割算法。该算法首先采用了K近邻(K-nearest neighbors,K NN)算法对点云进行分组;其次,将点云网络(point clouds network,PointNet)中的局部特征与中心点全局特征进行拼接,增强算法对几何细节和全局上下文信息的捕捉能力,从而提高算法的分割精度和鲁棒性,实现了对油菜点云器官的精准分割。使用自制的油菜点云数据集进行实验,结果表明,K F-PointNet++算法在油菜点云分割中的总体精度(overall accuracy,OA)可达97.1%,平均交并比(mean intersection over union,mIoU)为86.4%。该算法在分割性能方面明显优于PointNet、深度点云网络(PointNet++)和核点卷积(kernal point convolution,KPConv),可以为油菜表型研究提供可靠基础。

Multi-time scale analysis of precipitation variation in Guyuan, China:1957-2005

Morlet wavelet transformation is used in this paper to analyze the multi time scale characteristics of pre cipitation data series from 1957 to 2005 in Guyuan region.The results showed that(1) the annual precipitation evo lution process had obvious multi time scale variation characteristics of 15 25 years,7 12 years and 3 6 years,and different time scales had different oscillation energy densities;(2) the periods at smaller time scales changed more frequently,which often nested in a biggish quasi periodic oscillations,so the concrete time domain should be ana lyzed if necessary;(3) the precipitation had three main periods(22 year,9 year and 4 year) and the 22 year period was especially outstanding,and the analysis of this main period reveals that the precipitation would be in a relative high water period until about 2012.

基于PointNet++的邻域特征增强点云语义分割方法

随着智能驾驶、机器人导航等以点云为基础的应用蓬勃发展,点云语义分割逐渐成为研究热点。然而,现有的点云语义分割方法存在局部特征提取不充分、特征融合不完整的缺陷。针对这些不足,提出了对应的解决方案。对于局部特征提取不充分的现象,通过嵌入邻域点的坐标、方向、距离等相关信息去关联邻域点的显式特征。对于特征融合不完整的现象,提出了一种最大池化与自注意力池化相结合的混合池化方法。网络架构基于PointNet++,并结合提出的局部特征提取和融合方法,在S3DIS数据集上的实验结果表明,与基线方法PointNet++相比,各评价指标都有不同程度的提高,证实了新方法的有效性和优越性。

基于Point Transformer v2的点云枝叶分离方法研究

准确高效的点云枝叶分离对精确计算森林树木的垂直参数至关重要。然而,当前的研究方法计算成本高,且依赖先验知识导致泛化能力不足。针对以上问题,文章提出利用基于点特征的Transformer网络进行自动化的森林场景三维点云的枝叶分离研究。该方法使用Point Transformer v2网络,首先利用网格编码模块提取可学习的局部结构关系,保留点云的几何拓扑结构;其次使用分组注意力实现多通道联合学习,降低特征的冗余度,提高计算的效率;最后构建了基于点的Transformer网络实现高精度森林树木三维点云语义分割,降低了对于先验知识的需求。使用地基激光扫描仪获取的加拿大和芬兰7个不同树种样地的三维点云数据,进行枝叶分离实验和精度评价。实验结果表明,网络整体精度(OA)为94.42%,mIoU为78.89%,能够适应不同树种、不同点云密度的森林场景的枝叶分离。

基于改进PointNet++的船体分段合拢面构件智能识别算法研究

[目的]三维扫描仪获得的船体分段合拢面点云数据,具有精度高、数据量大的优势,能够很好地反映分段合拢面的建造状况。由于现有的PointNet++网络无法处理大容量点云数据,因此提出一种基于改进PointNet++的船体分段合拢面构件智能识别算法,实现针对大容量船体分段合拢面点云数据构件的智能识别。[方法]基于超体素生长理论对船体分段合拢面点云数据进行分割及简化,构建船体分段合拢面点云数据集,并使用该数据集训练基于深度学习理论改进的PointNet++网络。[结果]网络模型在船体分段合拢面点云数据训练集和测试集上的收敛结果趋于稳定,在测试集上识别准确率达到90.012%。[结论]该方法具有良好的识别能力,能够完成船体分段合拢面构件的智能识别。

基于PointNet++进行附属设施语义分割的隧道收敛变形分析

随着城市轨道交通日趋广泛,隧道结构变形引起的地铁安全事故凸显,亟需对运营期隧道进行变形检测。隧道衬砌作为隧道变形分析的研究对象,衬砌内表面存在的大量附属设施影响隧道收敛变形分析精度。为了提高变形分析精度,解决点云处理环节中存在的自动化程度低的问题,提出基于PointNet++点云语义分割的隧道收敛变形分析方法。首先利用深度学习方法进行点云语义分割,对隧道衬砌附属设施进行自动滤除。然后对隧道衬砌进行断面提取,利用随机抽样一致性算法(Random Sample Consensus,RANSAC)对隧道断面点云进行采样,分析隧道收敛变形程度,从Z+F PROFILER 9012A激光断面扫描仪获取山东省济南市地铁盾构隧道点云实测数据上并进行应用。研究结果表明:所提出的处理方法可以有效地将大规模隧道衬砌与连接紧密的附属设施分离出来,隧道附属设施总体分类精度达到96%,滤波结果较好地保留了隧道衬砌原始形态特征。在对隧道整体和局部收敛变形分析的重复性验证中,测试区间内隧道整体变形精度往返测长半轴平均偏差为1.04 mm,短半轴平均偏差为0.9 mm,测试区间内隧道局部收敛变形往返测标准差最小为0.773 mm,最大为0.938 mm,可以满足隧道收敛变形分析的精度需求。研究结果可以有效提升处理大规模隧道数据的自动化程度,具有良好的有效性与可靠性,对运营期地铁隧道收敛变形检测或监测有较好的实践应用意义。

Market-based control strategy for long-span structures considering the multi-time delay issue

To solve the different time delays that exist in the control device installed on spatial structures, in this study, discrete analysis using a 2N precise algorithm was selected to solve the multi-time-delay issue for long-span structures based on the market-based control （MBC） method. The concept of interval mixed energy was introduced from computational structural mechanics and optimal control research areas, and it translates the design of the MBC multi-time-delay controller into a solution for the segment matrix. This approach transforms the serial algorithm in time to parallel computing in space, greatly improving the solving efficiency and numerical stability. The designed controller is able to consider the issue of time delay with a linear controlling force combination and is especially effective for large time-delay conditions. A numerical example of a long-span structure was selected to demonstrate the effectiveness of the presented controller, and the time delay was found to have a significant impact on the results.

Point Cloud Classification Using Content-Based Transformer via Clustering in Feature Space

Recently, there have been some attempts of Transformer in 3D point cloud classification. In order to reduce computations, most existing methods focus on local spatial attention,but ignore their content and fail to establish relationships between distant but relevant points. To overcome the limitation of local spatial attention, we propose a point content-based Transformer architecture, called PointConT for short. It exploits the locality of points in the feature space(content-based), which clusters the sampled points with similar features into the same class and computes the self-attention within each class, thus enabling an effective trade-off between capturing long-range dependencies and computational complexity. We further introduce an inception feature aggregator for point cloud classification, which uses parallel structures to aggregate high-frequency and low-frequency information in each branch separately. Extensive experiments show that our PointConT model achieves a remarkable performance on point cloud shape classification. Especially, our method exhibits 90.3% Top-1 accuracy on the hardest setting of ScanObjectN N. Source code of this paper is available at https://github.com/yahuiliu99/PointC onT.

Material point method simulation of hydro-mechanical behaviour in twophase porous geomaterials: A state-of-the-art review

The material point method(MPM)has been gaining increasing popularity as an appropriate approach to the solution of coupled hydro-mechanical problems involving large deformation.In this paper,we survey the current state-of-the-art in the MPM simulation of hydro-mechanical behaviour in two-phase porous geomaterials.The review covers the recent advances and developments in the MPM and their extensions to capture the coupled hydro-mechanical problems involving large deformations.The focus of this review is aiming at providing a clear picture of what has or has not been developed or implemented for simulating two-phase coupled large deformation problems,which will provide some direct reference for both practitioners and researchers.

Two-Staged Method for Ice Channel Identification Based on Image Segmentation and Corner Point Regression

Identification of the ice channel is the basic technology for developing intelligent ships in ice-covered waters,which is important to ensure the safety and economy of navigation.In the Arctic,merchant ships with low ice class often navigate in channels opened up by icebreakers.Navigation in the ice channel often depends on good maneuverability skills and abundant experience from the captain to a large extent.The ship may get stuck if steered into ice fields off the channel.Under this circumstance,it is very important to study how to identify the boundary lines of ice channels with a reliable method.In this paper,a two-staged ice channel identification method is developed based on image segmentation and corner point regression.The first stage employs the image segmentation method to extract channel regions.In the second stage,an intelligent corner regression network is proposed to extract the channel boundary lines from the channel region.A non-intelligent angle-based filtering and clustering method is proposed and compared with corner point regression network.The training and evaluation of the segmentation method and corner regression network are carried out on the synthetic and real ice channel dataset.The evaluation results show that the accuracy of the method using the corner point regression network in the second stage is achieved as high as 73.33%on the synthetic ice channel dataset and 70.66%on the real ice channel dataset,and the processing speed can reach up to 14.58frames per second.

Research on multi-time scale doubly-fed wind turbine test system based on FPGA+CPU heterogeneous calculation

As the proportion of renewable energy increases, the interaction between renewable energy devices and the grid continues to enhance. Therefore, the renewable energy dynamic test in a power system has become more and more important. Traditional dynamic simulation systems and digital-analog hybrid simulation systems are difficult to compromise on the economy, flexibility and accuracy. A multi-time scale test system of doubly fed induction generator based on FPGA+ CPU heterogeneous calculation is proposed in this paper. The proposed test system is based on the ADPSS simulation platform. The power circuit part of the test system is setup up using the EMT(electromagnetic transient simulation) simulation, and the control part uses the actual physical devices. In order to realize the close-loop testing for the physical devices, the power circuit must be simulated in real-time. This paper proposes a multi-time scale simulation algorithm, in which the decoupling component divides the power circuit into a large time scale system and a small time scale system in order to reduce computing effort. This paper also proposes the FPGA+CPU heterogeneous computing architecture for implementing this multitime scale simulation. In FPGA, there is a complete small time-scale EMT engine, which support the flexibly circuit modeling with any topology. Finally, the test system is connected to an DFIG controller based on Labview to verify the feasibility of the test system.

Mobility and dynamic erosion process of granular flow:insights from numerical investigation using material point method

In order to understand the dynamics of granular flow on an erodible base soil,in this paper,a series of material point method-based granular column collapse tests were conducted to investigate numerically the mobility and dynamic erosion process of granular flow subjected to the complex settings,i.e.,the aspect ratio,granular mass,friction and dilatancy resistance,gravity and presence of water.A set of power scaling laws were proposed to describe the final deposit characteristics of granular flow by the relations of the normalized run-out distance and the normalized final height of granular flow against the aspect ratio,being greatly affected by the complex geological settings,e.g.,granular mass,the friction and dilatancy resistance of granular soil,and presence of water in granular flow.An index of the coefficient of friction of granular soil was defined as a ratio of the target coefficient of friction over the initial coefficient of friction to quantify the scaling extent of friction change(i.e.,friction strengthening or weakening).There is a characteristic aspect ratio of granular column corresponding to the maximum mobility of granular flow with the minimum index of the apparent coefficient of friction.The index of the repose coefficient of friction of granular flow decreased gradually with the increase in aspect ratio because higher potential energy of granular column at a larger aspect ratio causes a larger kinetic energy of granular soil to weaken the friction of granular soil as a kind of velocity-related friction weakening.An increase in granular mass reduces gradually the indexes of the apparent and repose coefficients of friction of granular soil to enhance the mobility of granular flow.The mobility of granular flow increases gradually with the decrease in friction angle or increase in dilatancy angle of granular soil.However,the increase of gravity accelerates granular flow but showing the same final deposit profile without any dependence on gravity.The mobility of granular flow increases gradually by lowering the indexes of the apparent and repose coefficients of friction of granular flow while changing the surroundings,in turn,the dry soil,submerged soil and saturated soil,implying a gradually increased excessive mobility of granular flow with the friction weakening of granular soil.Presence of water in granular flow may be a potential catalyzer to yield a long run-out granular flow,as revealed in comparison of water-absent and water-present granular flows.In addition,the dynamic erosion and entrainment of based soil induced by granular flow subjected to the complex geological settings,i.e.,the aspect ratio,granular mass,gravity,friction and dilatancy resistance,and presence of water,were comprehensively investigated as well.

Automatic Extraction Method of 3D Feature Guidelines for Complex Cultural Relic Surfaces Based on Point Cloud

Cultural relics line graphic serves as a crucial form of traditional artifact information documentation,which is a simple and intuitive product with low cost of displaying compared with 3D models.Dimensionality reduction is undoubtedly necessary for line drawings.However,most existing methods for artifact drawing rely on the principles of orthographic projection that always cannot avoid angle occlusion and data overlapping while the surface of cultural relics is complex.Therefore,conformal mapping was introduced as a dimensionality reduction way to compensate for the limitation of orthographic projection.Based on the given criteria for assessing surface complexity,this paper proposed a three-dimensional feature guideline extraction method for complex cultural relic surfaces.A 2D and 3D combined factor that measured the importance of points on describing surface features,vertex weight,was designed.Then the selection threshold for feature guideline extraction was determined based on the differences between vertex weight and shape index distributions.The feasibility and stability were verified through experiments conducted on real cultural relic surface data.Results demonstrated the ability of the method to address the challenges associated with the automatic generation of line drawings for complex surfaces.The extraction method and the obtained results will be useful for line graphic drawing,displaying and propaganda of cultural relics.

基于改进PointNet++的输电线路关键部位点云语义分割研究

输电线路的关键部位包括塔身、导线、绝缘子、避雷线以及引流线,无人机精细化导航的首要任务是构造输电线路的点云地图并从中分割出上述部位。为解决现有算法在输电线路的绝缘子、引流线等精细结构分割时精度低的问题,通过改进PointNet++算法,提出了一种面向输电线路精细结构的点云分割方法。首先,基于无人机机载激光雷达在现场采集的点云数据,构造了输电线路点云分割数据集;其次,通过对比实验,筛选出在本输电线路场景下合理的数据增强方法,并对数据集进行了数据增强;最后,将自注意力机制以及倒置残差结构和PointNet++相结合,设计了输电线路关键部位点云语义分割算法。实验结果表明:该改进PointNet++算法在全场景输电线路现场点云数据作为输入的前提下,首次实现了对引流线、绝缘子等输电线路中精细结构和导线、杆塔塔身以及输电线路无关背景点的同时分割,平均交并比(mean intersection over union,mIoU)达80.79%,所有类别分割的平均F_(1)值(F1 score)达88.99%。

Coexistence of Dirac and Weyl points in non-centrosymmetric semimetal NbIrTe_(4)

Using angle-resolved photoemission spectroscopy and density functional theory calculations methods,we investigate the electronic structures and topological properties of ternary tellurides NbIrTe_(4),a candidate for type-II Weyl semimetal.We demonstrate the presence of several Fermi arcs connecting their corresponding Weyl points on both termination surfaces of the topological material.Our analysis reveals the existence of Dirac points,in addition to Weyl points,giving both theoretical and experimental evidences of the coexistence of Dirac and Weyl points in a single material.These findings not only confirm NbIrTe_(4) as a unique topological semimetal but also open avenues for exploring novel electronic devices based on its coexisting Dirac and Weyl fermions.