H_∞ State Feedback Delay-dependent Control for Discrete Systems with Multi-time-delay

In this paper, H ∞ state feedback control with delay information for discrete systems with multi-time-delay is discussed. Making use of linear matrix inequality (LMI) approach, a time-delay-dependent criterion for a discrete system with multi-time-delay to satisfy H ∞ performance indices is induced, and then a strategy for H ∞ state feedback control with delay values for plant with multi-time-delay is obtained. By solving corresponding LMI, a delay-dependent state feedback controller satisfying H ∞ performance indices is designed. Finally, a simulation example demonstrates the validity of the proposed approach. Keywords Multi-time-delay - discrete time system - LMI - delay-dependent - H ∞ control Bai-Da Qu received B. S. degree in electrical automation from Fuxin Mining Institute, China in 1982, M. Eng. degree from Hefei University of Polytechnology in 1990, and Ph.D from Northerneastern University in 1999. He was an electro-mechanical engineer at Erdaohezi Mine, Heilongjiang, China from 1982 to 1990, a Lecturer, Senior Engineer, Associate Professor and Professor in Shenyang Institue of Technology from 1990 to 2002. He is currently a professor in Communication and Control Engineering School, Southern Yangtze University. His research interests include control theory and applications (robust control, H ∞ control, time-delay systems, complex systems), system engineering (modeling, analysis and simulation, MIS,CMIS), power-electronics and electrical driving, signal detecting and process, industrial automation.

大型宽带相控阵天线多级子阵延时应用研究

在采用子阵延时方案的大型宽带相控阵天线系统设计中,子阵划分结构和实时延时器使用方式将直接决定系统的宽带性能、工程实现复杂度以及研制成本。本文基于阵列方向图合成的基础理论模型,推导得出多级子阵延时方案与传统单级子阵延时方案具有相近的阵列辐射性能。通过一维大型线阵多级子阵方案的应用示例,说明多级子阵延时方案可显著降低系统总体复杂度,在此基础上分析并总结阵列宽带性能与子阵规模和时延步进量之间的关系。

大型宽带相控阵天线子阵级延时器误差分析及补偿

子阵级使用延时器是改善宽带相控阵天线波束性能常用的技术途径。在对延时器电性能误差特性分析的基础上,提出采用次级子阵延时器联合TR通道移相器和衰减器分级补偿天线系统内部射频链路的时延、幅度和相位误差的方法。通过采用两级子阵延时架构的一维大型天线阵列模型的仿真验证,表明该方法不仅可实现大带宽大扫描角大型相控阵天线的方向图高精度控制,同时降低了大时延量延时器的研制难度。

光纤延迟多道分析测量脉冲激光激发时间分辨光谱

报道应用多通道光纤延时耦合结合二维CCD阵列探测，实现瞬态脉冲激光激发光谱时间分辨测量的方法和技术。多光纤延时耦合器由五条不同长度的石英光纤组成，每一光纤之问的长度差为1～2m（相对延时为5～10ns），光学多道分析器为OMA-4。使用上述方法和装置实现了脉冲激光激发R6G染料激光光谱、脉冲激光激发丙酮（Acetone）的受激拉曼散射光谱以及脉冲激光激发金属样品所产生的等离子体光谱的时间分辨多道测量，时间分辨率达到5ns。