Buck-Boost converter in the total dose radiation environment will mainly bring the output voltage drift, linear adjustment rate and load adjustment rate decline and other effects, so that the output stability performa...Buck-Boost converter in the total dose radiation environment will mainly bring the output voltage drift, linear adjustment rate and load adjustment rate decline and other effects, so that the output stability performance of the circuit deteriorates. Aiming at the problems of high cost,large layout area and poor universality caused by the traditional total ionizing dose effect hardening method based on process and layout, this paper proposes a total ionizing dose effect hardening design method with parallel monitoring and hardening, which can achieve total ionizing dose effect hardening at the circuit level without process. The anti-total dose capability of Buck-Boost converter is improved. The circuit design and physical implementation of the proposed method are verified based on 0.18 μm bipolar complementary metal-oxide-semiconductor(CMOS) double-diffused metal-oxide-semiconductor(DMOS)(BCD) process. The results show that the system gain decrease rate can be compensated from 19.2% to 6.2%, and the output voltage shift rate can be improved from 2.00% to 0.15% at a dose of 200×10^(3) rad(Si). Moreover, the load adjustment rate and linear adjustment rate are reduced. They are respectively decreased to 0.191 %/A and 0.093 %/V. This provides a new idea for the design of total ionizing dose effect hardening at circuit and system level.展开更多
针对协作通信系统中源到中继及中继到目的两阶段的瞬时信道状态信息(CSI)影响系统整体误码率(BER)的问题,提出一种综合衡量两阶段信道系数的中继选择方案。首先,根据每个候选中继的CSI,比较源到中继及中继到目的的两阶段信道系数,选出...针对协作通信系统中源到中继及中继到目的两阶段的瞬时信道状态信息(CSI)影响系统整体误码率(BER)的问题,提出一种综合衡量两阶段信道系数的中继选择方案。首先,根据每个候选中继的CSI,比较源到中继及中继到目的的两阶段信道系数,选出两者中较差的信道状态;然后,按照较差的信道状态对候选中继排序,得到近似较优的中继节点集合;最后,从中选择两阶段信道系数之和最大者作为被选中继参与协作传输。仿真结果表明,当候选中继节点数为100及5,BER下降到10-4及10-5时,所提的中继选择方案与基于最优较差信道的中继选择方案、基于最近邻关系的中继选择方案相比,所需信噪比(SNR)分别降低了0.4 d B和0.2 d B。所提方案能够增加无线中继网络的信息传输范围,提高信息传输的可靠性。展开更多
基金supported by the National Natural Science Foundation of China (No. 62171367)Key R&D Program of Shaanxi Province (No. 2021GY-060)+1 种基金Innovation Capability Support Program of Shaanxi Province (No. 2022TD-39)School-Enterprise Collaboration Fund of Xi’an University of Technology (No. 252062109)。
文摘Buck-Boost converter in the total dose radiation environment will mainly bring the output voltage drift, linear adjustment rate and load adjustment rate decline and other effects, so that the output stability performance of the circuit deteriorates. Aiming at the problems of high cost,large layout area and poor universality caused by the traditional total ionizing dose effect hardening method based on process and layout, this paper proposes a total ionizing dose effect hardening design method with parallel monitoring and hardening, which can achieve total ionizing dose effect hardening at the circuit level without process. The anti-total dose capability of Buck-Boost converter is improved. The circuit design and physical implementation of the proposed method are verified based on 0.18 μm bipolar complementary metal-oxide-semiconductor(CMOS) double-diffused metal-oxide-semiconductor(DMOS)(BCD) process. The results show that the system gain decrease rate can be compensated from 19.2% to 6.2%, and the output voltage shift rate can be improved from 2.00% to 0.15% at a dose of 200×10^(3) rad(Si). Moreover, the load adjustment rate and linear adjustment rate are reduced. They are respectively decreased to 0.191 %/A and 0.093 %/V. This provides a new idea for the design of total ionizing dose effect hardening at circuit and system level.
文摘基于TDOA的超声波测距模型认为距离为声波的速度与时间差之积,忽略了温度等因素对速度的影响,此外,系统计时的误差影响了时间差测量,导致测距精度不高.分析了基于TDOA原理的超声波测距系统误差的主要来源,建立模型,通过实验对温度、距离衰减及时间差测量进行补偿,利用超声波反射特性对障碍物进行测距,并利用多探头在一定程度上削弱了方向性带来的影响.实验结果表明:系统性能稳定,测距精度高,环境适应性更强.在超声波测距范围内,最大误差不超过4 cm.
文摘针对协作通信系统中源到中继及中继到目的两阶段的瞬时信道状态信息(CSI)影响系统整体误码率(BER)的问题,提出一种综合衡量两阶段信道系数的中继选择方案。首先,根据每个候选中继的CSI,比较源到中继及中继到目的的两阶段信道系数,选出两者中较差的信道状态;然后,按照较差的信道状态对候选中继排序,得到近似较优的中继节点集合;最后,从中选择两阶段信道系数之和最大者作为被选中继参与协作传输。仿真结果表明,当候选中继节点数为100及5,BER下降到10-4及10-5时,所提的中继选择方案与基于最优较差信道的中继选择方案、基于最近邻关系的中继选择方案相比,所需信噪比(SNR)分别降低了0.4 d B和0.2 d B。所提方案能够增加无线中继网络的信息传输范围,提高信息传输的可靠性。
