Acoustic radiation force on a multilayered sphere in a Gaussian standing field

We develop a model for calculating the radiation force on spherically symmetric multilayered particles based on the acoustic scattering approach.An expression is derived for the radiation force on a multilayered sphere centered on the axis of a Gaussian standing wave propagating in an ideal fluid,The effects of the sound absorption of the materials and sound wave on acoustic radiation force of a multilayered sphere immersed in water are analyzed,with particular emphasis on the shell thickness of every layer,and the width of the Gaussian beam.The results reveal that the existence of particle trapping behavior depends on the choice of the non-dimensional frequency ka,as well as the shell thickness of each layer.This study provides a theoretical basis for the development of acoustical tweezers in a Gaussian standing wave,which may benefit the improvement and development of acoustic control technology,such as trapping,sorting,and assembling a cell,and drug delivery applications.

Effects of LaNiO_3 Interlayer on the Microstructures and Electrical Properties of Ba_(0.9)Sr_(0.1)Ti_(0.99)Mn_(0.01)O_3 Multilayer

The aim of this work was to investigate the effects of low-resistivity interlayer on the physical properties of periodic Ba_（0.9）Sr_（0.1）Ti_（0.99）Mn_（0.01）O_3（BSTM） multilayers prepared by a chemical solution deposition method. A LaNiO_3（LNO） layer was inserted into the periodic BSTM multilayer artificially to form a sandwiched configuration of BSTM/LNO/BSTM. The capacitances at low frequencies（〈100 k Hz） of the sandwiched multilayer are significantly enhanced compared to that of the pure BSTM multilayer. The space charge accumulated at the LNO layer was proposed to explain the enhancement based on Maxwell-Wagner（M-W） model. However, LNO interlayer leads to an increase in the leakage current. A non-Ohmic conduction region is observed for BSTM/LNO/BSTM multilayer when the electric field exceeds 100 k V/cm. The results offer a new approach to achieve dielectric films with high dielectric constant.

Recent development of transient electronics

Transient electronics are an emerging class of electronics with the unique characteristic to completely dissolve within a programmed period of time. Since no harmful byproducts are released, these electronics can be used in the human body as a diagnostic tool, for instance, or they can be used as environmentally friendly alternatives to existing electronics which disintegrate when exposed to water. Thus, the most crucial aspect of transient electronics is their ability to disintegrate in a practical manner and a review of the literature on this topic is essential for understanding the current capabilities of transient electronics and areas of future research. In the past, only partial dissolution of transient electronics was possible, however, total dissolution has been achieved with a recent discovery that silicon nanomembrane undergoes hydrolysis. The use of single- and multi-layered structures has also been explored as a way to extend the lifetime of the electronics. Analytical models have been developed to study the dissolution of various functional materials as well as the devices constructed from this set of functional materials and these models prove to be useful in the design of the transient electronics.

Effects of O_(2)adsorption on secondary electron emission properties

The surface adsorption of gas molecules is a key factor limiting the secondary electron yield(SEY)of a material in many areas of applied physics.The influence of O_(2)adsorption on the SEY of metallic Ag is investigated in this work.To account for the particle distribution,we propose a BET theory based on multilayer O_(2)physisorption model.Furthermore,based on the phenomenological model of secondary electron(SE)emission and by taking into account the different scattering processes between electrons and particles in the adsorbed layer,we develop a numerical model of SEY in the adsorbed state using Monte Carlo simulations.The relationships among O_(2)adsorption,adsorption layer thickness,and SEY variation characteristics are then examined through a series of experiments.After 12-h exposure to O_(2),the clean samples increases12%-19%of the maximum value of SEY and 2.3 nm in thickness of the adsorbed layer.Experimental results are also compared with the results from the MC model to determine whether the model is accurate.

Detective Method for Water Pollution Based on Millimeter Wave Radiant Characteristics

Aim at monitoring water pollution, especially the aquatic vegetation, the multilayer dielectric model based on incoherent method is established to analysis the brightness temperature of aquatic vegetation. A 3 mm radiometer is used to measure the radiant characteristics of water pollution. Compared to 3 layer dielectric model, the simulation result of multilayer dielectric model is in better accordance with the experimental data, which shows that the multilayer dielectric model can model aquatic vegetation’s radiant characteristics more precisely. This result shows that water has millimeter wave radiant characteristics of low brightness temperature, cold target compared to aquatic vegetation. Based on the study of water’s brightness temperatures and aquatic vegetation’s radiant characteristics, the radiant characteristics can be used to monitor aquatic vegetation.

Micromesh reinforced strain sensor with high stretchability and stability for full-range and periodic human motions monitoring

The development of strain sensors with high stretchability and stability is an inevitable requirement for achieving full-range and long-term use of wearable electronic devices.Herein,a resistive micromesh reinforced strain sensor(MRSS)with high stretchability and stability is prepared,consisting of a laser-scribed graphene(LSG)layer and two styrene-block-poly(ethylene-ran-butylene)-block-poly-styrene micromesh layers embedded in Ecoflex.The micromesh reinforced structure endows the MRSS with combined characteris-tics of a high stretchability(120%),excellent stability(with a repetition error of 0.8%after 11000 cycles),and outstanding sensitivity(gauge factor up to 2692 beyond 100%).Impressively,the MRSS can still be used continauously within the working range without damage,even if stretched to 300%.Furthermore,compared with different structure sensors,the mechanism of the MRSS with high stretchability and stability is elucidated.What's more,a multilayer finite element model,based on the layered structure of the LSG and the morphology of the cracks,is proposed to investigate the strain sensing behavior and failure mechanism of the MRSS.Finally,due to the outstanding performance,the MRSS not only performes well in monitoring full-range human motions,but also achieves intelligent recognitions of various respiratory activities and ges-tures assisted by neural network algorithms(the accuracy up to 94.29%and 100%,respectively).This work provides a new approach for designing high-performance resistive strain sensors and shows great potential in full-range and long-term intelligent health management and human-machine interac-tions applications.

Nonlinear Vibration of the Flexoelectric Nanoplate with Surface Elastic Electrodes Under Active Electric Loading

This paper mainly studies the effects of surface elastic electrodes and electric loading on the nonlinear vibration of flexoelectric nanoplate.The governing equations are derived based on the von Karman type strain-displacement relations and the flexoelectricity theory.The nonlinear vibration equation is solved by an approximate method.Numerical results reveal that the surface elastic electrodes and the length-width ratio of flexoelectric nanoplate have a more significant effect on the nonlinear resonant frequency of simply-supported nanoplate than that of the all-edge-clamped nanoplate.Meanwhile,the effect of the graphene electrode on the nonlinear resonant frequency is more notable than that of the A1 electrode.Additionally,the applied electric loading can significantly affect the nonlinear resonant frequency of the flexoelectric nanoplate.For the nanoplates with different boundary conditions,the applied electric loading has different effects on the nonlinear resonant frequency.This study has certain research significance in the structure design and examination of the flexoelectric nanoplate with electrodes.