Actors of Psychoactive Drug Initiation among Adolescents in Yaoundé-Cameroon

Introduction: Actors of psychoactive drug initiation refer to those who introduce others to psychoactive drug use (initiators) and those who are introduced to psychoactive drugs (users). By identifying their features, better prevention and intervention programs can be developed to reduce psychoactive drug use among adolescents. This article describes the role of actors of psychoactive drug initiation among teenagers in secondary schools in Yaoundé (Cameroon). Methodology: A cross sectional study was carried out in twelve secondary schools in Yaoundé from October 2022 to May 2023. Adolescents from Form four to upper sixth, who assented to participate in the study and received parental consent were included. Data were collected in a structured self-reported questionnaire and analyzed using SPSS 23. Quantitative variables were expressed using means, standard deviations, median and interquartile ranges depending on the distribution of data. Qualitative variables were expressed in the form of frequency and percentages. Results: Drug use was more prevalent among male adolescents (55.3%) from nuclear families (91.4%) who received relatively high pocket money. The main sources of drug exposure were non-family members (49.7%), especially friends outside school. The most frequent place of initiation was snack bars (33.1%). Conclusion: The study revealed the importance of the family, friends and leisure places in the initiation process of drug use in teenagers. Based on these results, parents and school authorities should work together to create a safe and supportive environment that fosters communication, education to prevent drug abuse among adolescents in Yaoundé.

Effects of the initiation position on the damage and fracture characteristics of linear-charge blasting in rock

To study the effects of the initiation position on the damage and fracture characteristics of linear-charge blasting, blasting model experiments were conducted in this study using computed tomography scanning and three-dimensional reconstruction methods. The fractal damage theory was used to quantify the crack distribution and damage degree of sandstone specimens after blasting. The results showed that regardless of an inverse or top initiation, due to compression deformation and sliding frictional resistance, the plugging medium of the borehole is effective. The energy of the explosive gas near the top of the borehole is consumed. This affects the effective crushing of rocks near the top of the borehole, where the extent of damage to Sections Ⅰ and Ⅱ is less than that of Sections Ⅲ and Ⅳ. In addition, the analysis revealed that under conditions of top initiation, the reflected tensile damage of the rock at the free face of the top of the borehole and the compression deformation of the plug and friction consume more blasting energy, resulting in lower blasting energy efficiency for top initiation. As a result, the overall damage degree of the specimens in the top-initiation group was significantly smaller than that in the inverse-initiation group. Under conditions of inverse initiation, the blasting energy efficiency is greater, causing the specimen to experience greater damage. Therefore, in the engineering practice of rock tunnel cut blasting, to utilize blasting energy effectively and enhance the effects of rock fragmentation, using the inverse-initiation method is recommended. In addition, in three-dimensional(3D) rock blasting, the bottom of the borehole has obvious end effects under the conditions of inverse initiation, and the crack distribution at the bottom of the borehole is trumpet-shaped. The occurrence of an end effect in the 3D linear-charge blasting model experiment is related to the initiation position and the blocking condition.

Frost heaving and crack initiation characteristics of tunnel rock mass in cold regions under low-temperature degradation

Water freezing in rock fractures causes volumetric expansion and fracture development through frost heaving.This study introduces a novel analytical model to investigate how uneven freezing force and surrounding rock pressure influence fracture initiation,based on mass conservation,elasticity,and water-ice phase transition principles.A model for rock fracture initiation considering freezing temperature,uneven freezing expansion,in-situ stress,and lateral pressure was proposed based on fracture mechanics.Equations for stress intensity factors were developed and validated using the phase field method.The effects of rock elastic modulus anisotropy and critical fracture energy density on fracture initiation were also discussed.The results show that the values of KI and KII exhibit an upward trend as the freezing temperature,uneven expansion,in-situ stress,and lateral pressure increase.The uneven freezing expansion has the most significant influence on KI and KII values among these parameters.As the uneven freezing expansion coefficient increases to 0.5,the fracture initiation mode shifts from tensile fracture to shear fracture.As the lateral pressure coefficient increases to 1,the fracture initiation mode shifts from tensile fracture to shear fracture.Rock elastic modulus anisotropy causes fractures to propagate in a clockwise direction,forming a'butterfly'pattern.Critical fracture energy density an isotropy causes counterclockwise deviation in propagation direction,resulting in branching paths and an'H'-shaped pattern.

Molecular cloning,characterization and promoter analysis of LbgCWIN1 and its expression profiles in response to exogenous sucrose during in vitro bulblet initiation in lily

Lily(Lilium spp.) is an important ornamental flower, which is mainly propagated by bulbs. Cell wall invertases(CWINs), which catalyze the irreversibly conversion of sucrose into glucose and fructose in the extracellular space, are key enzymes participating in sucrose allocation in higher plants. Previous studies have shown that CWINs play an essential role in bulblet initiation process in bulbous crops, but the underlying molecular mechanism remains unclear. Here, a CWIN gene of Lilium brownii var. giganteum(Lbg) was identified and amplified from genomic DNA. Quantitative RT-PCR assays revealed that the expression level of LbgCWIN1 was highly upregulated exactly when the endogenous starch degraded in non-sucrose medium during in vitro bulblet initiation in Lbg. Phylogenetic relationship, motif, and domain analysis of LbgCWIN1 protein and CWINs in other plant species showed that all sequences of these CWIN proteins were highly conserved. The promoter sequence of LbgCWIN1 possessed a number of alpha-amylase-, phytohormone-, light-and stress-responsive cis-elements. Meanwhile, β-glucuronidase(GUS) assay showed that the 459 bp upstream fragment from the translational start site displayed maximal promoter activity. These results revealed that LbgCWIN1 might function in the process of in vitro bulblet initiation and be in the response to degradation of endogenous starch.

A hybrid CNN-LSTM model for diagnosing rice nutrient levels at the rice panicle initiation stage

Nitrogen(N)and potassium(K)are two key mineral nutrient elements involved in rice growth.Accurate diagnosis of N and K status is very important for the rational application of fertilizers at a specific rice growth stage.Therefore,we propose a hybrid model for diagnosing rice nutrient levels at the early panicle initiation stage(EPIS),which combines a convolutional neural network(CNN)with an attention mechanism and a long short-term memory network(LSTM).The model was validated on a large set of sequential images collected by an unmanned aerial vehicle(UAV)from rice canopies at different growth stages during a two-year experiment.Compared with VGG16,AlexNet,GoogleNet,DenseNet,and inceptionV3,ResNet101 combined with LSTM obtained the highest average accuracy of 83.81%on the dataset of Huanghuazhan(HHZ,an indica cultivar).When tested on the datasets of HHZ and Xiushui 134(XS134,a japonica rice variety)in 2021,the ResNet101-LSTM model enhanced with the squeeze-and-excitation(SE)block achieved the highest accuracies of 85.38 and 88.38%,respectively.Through the cross-dataset method,the average accuracies on the HHZ and XS134 datasets tested in 2022 were 81.25 and 82.50%,respectively,showing a good generalization.Our proposed model works with the dynamic information of different rice growth stages and can efficiently diagnose different rice nutrient status levels at EPIS,which are helpful for making practical decisions regarding rational fertilization treatments at the panicle initiation stage.

Shock Initiation Experiments with Modeling on a DNAN Based MeltCast Insensitive Explosive

2,4-dinitroanisole(DNAN)is a good replacement for 2,4,6-trinitrotoluene(TNT)in melt-cast explosives due to its superior insensitivity.With the increasing use of DNAN-based melt-cast explosives,the prediction of reaction violence and hazard assessment of the explosives subjected to shock is of great significance.This study investigated the shock initiation characteristics for a DNAN-based melt-cast explosive,DHFA,using the one-dimensional Lagrangian apparatus.The embedded manganin gauges in the apparatus record the pressure histories at four Lagrangian positions and show that shock-todetonation transition in DHFA needs a high input shock pressure.The experimental data are analyzed to calibrate the Ignition and Growth model.The calibration is performed using an objective function based on both pressure history and the arrival time of shock.Good agreement between experimental and calculated pressure histories indicates the high accuracy of the calibrated parameters with the optimization method.

Timing of Continuous Renal Replacement Therapy Initiation in Sepsis-Associated Acute Kidney Injury: A Comprehensive Review and Future Directions

This review examines the application of continuous renal replacement therapy(CRRT)in patients with sepsis-associated acute kidney injury(S-AKI),with a particular focus on the timing of CRRT initiation.This review addresses the controversy surrounding initiation timing and proposes future research directions.Through a systematic review of recent literature on CRRT for S-AKI,working principles,therapeutic mechanisms,initiation timing of CRRT,and related meta-analyses were summarized.Current studies indicate that the optimal timing for CRRT initiation in S-AKI patients remains inconclusive,with ongoing debate regarding whether early initiation significantly improves patient survival and renal function.This lack of consensus reflects the heterogeneity of the S-AKI patient population and the limitations of existing research methodologies.Future studies should focus on advancing the application of precision medicine in S-AKI and developing individualized treatment strategies by integrating multidimensional information to optimize CRRT utilization and improve patient outcomes.

Fatigue crack initiation and early propagation behavior of 2A97 Al-Li alloy

The fatigue crack initiation and early propagation behavior of 2A97 Al-Li alloy was studied. The smooth specimens were fatigued at room temperature under constant maximum stress control when stress ratio （R） is 0.1 and frequency （f） is 40 Hz. Microstructure observations were examined by optical microscopy, transmission electron microscopy, scanning electron microscopy and electron back scattered diffusion, in order to investigate the relationship between microstructure and fatigue crack initiation and early propagation behavior of 2A97 alloy. The results show that the fatigue cracks are predominantly initiated at inclusions and coarsen secondary phases on the surface of 2A97 alloy. The fatigue crack early propagation behavior of 2A97 alloy is predominantly influenced by the interactions between grain structure and dislocations or persistent slip bands （PSBs）. When the misorientation of two neighbouring grains is close to the orientations of the favorable slip plane within these two grains, high-angle grain boundary severely hinders the PSBs passing through, and thus leads to crack bifurcation and deflection.

Comprehensive Pattern of Primordium Initiation in Shoot Apex of Wheat

The time course of the initiation of different types of apical primordia on the stem of wheat (Triticum aestivum L.) was investigated to establish a comprehensive pattern of apical primordium development and quantitative dynamic relationships among different primordium initiation. The results showed that the initiation of leaf and bracteal primordia took the S shape, and that of spikelet and floret took the rise stage of parabolic shape in relation to GDD (growing degree days after sowing) in wheat. The bracteal was much like vegetative rather than reproductive organ in terms of the dynamic pattern of primordium initiation. The progress of spikelet and floret primordium initiation could well reflect the characteristics of different genotypes and the impact of different ecological environments on wheat apical development. The integrated model of different primordium initiation in shoot of wheat was an S_shaped curvilinear, and could be divided into three sub_models. The number of leaf primordia was affected by both genotype and environment, while the numbers of bracteal, spikelet and floret primordia were affected mainly by environmental factors. Measured with mean thermochron, the rates of initiation of leaf, bracteal and spikelet primordia in normal planting were the highest among all the sowing date treatments. In contrast to the relationships among leaf, bracteal, spikelet and their initiation duration, the correlation between the number of floret and its initiation duration was highly significant.

Effects of charge size on explosives thermal initiation critical temperature under constrained conditions

In order to study the relationship between charge size and thermal initiation critical temperature of explosive in defined conditions,cook-off test about JH explosive was carried out at a heating rate of 1 ℃/min using self-designed cook-off experiment setup based on thermostatic control technology.Numerical simulation was conducted to study the effects of different charge sizes on thermal initiation critical temperature of explosives with FLUENT software.Experiment results show that there is a thermal initiation critical temperature in cook-off bomb.Simulation results show that when the ratio of the length to diameter of explosives grains is a fixed value,the thermal initiation critical temperature of explosives decreases with the increase of the diameter of explosives grains.When the grains diameter of explosives increase up to a certain value,the influence of charge size on thermal initiation critical temperature tends to be weakened.Charge size has no influence on the ignition point of explosives.The ignition point is always in the center of the grain.

Hydraulic fracture initiation theory for a horizontal well in a coal seam

A series of experiments were pertbrmed to determine rock mechanical parameters related to hydraulic fracturing of coal. The effect of confining pressure and pore pressure on the strength of coal was stt, died. Experimental results show that the coal seam in the study areas has a relatively low elastic modulus, high Poisson＇s ratio, high fragility and is easily broken and compressed. The coal seam is considered as a transversely isotropic medium, since the physical properties in the direction of bedding plane and orthogonal to the bedding plane vary markedly. Based on the generalized plane strain model, stress distribution for an arbitrarily orientated wellbore in the coal seam was determined. In a horizontal well, hydraulic fracturing was lbund to initiate in the coal seam mass due to tensile failure, or from cleats due to shear or tensile failure. For those coal seams with abundant natural cleats, hydraulic fracture initiation can be induced by any of these mechanisms. In this study, hydraulic fracture initiation criteria tbr a horizontal well in a coal seam were established.

An experimental study of fracture initiation mechanisms during hydraulic fracturing

The mechanism of fracture initiation is the basic issue for hydraulic fracture technology. Because of the huge differences in fracture initiation mechanisms for different reservoirs,some successful fracturing techniques applied to porosity reservoirs are ineffectual for fractured reservoirs.Laboratory tests using a process simulation device were performed to confirm the characteristics of fracture initiation and propagation in different reservoirs.The influences of crustal stress field,confining pressure,and natural fractures on the fracture initiation and propagation are discussed.Experimental results demonstrate that stress concentration around the hole would significantly increase the fracture pressure of the rock.At the same time,natural fractures in the borehole wall would eliminate the stress concentration,which leads to a decrease in the fracture initiation pressure.

Effect of initiation manners on the scattering characteristics of semi-preformed fragment warhead

The lethality of a semi-preformed fragment warhead is closely related to the expand velocity and spatial distribution of the fragments from ruptured metal casing. The topic of how to improve the utilization of charge of have been drawing great attention from researchers and designer in this filed. In present paper,in order to investigate the influence of charge initiation manners on the scattering characteristics of semi-preformed fragment warhead, the numerical simulations and experimental test are conducted.Firstly, the influence of grid density on numerical results is investigated, and a proper numerical model with relatively high accuracy and effectiveness is determined. Then. numerical simulations of three kinds of different initiation position of a semi-preformed fragment warhead are carried out. An experimental test of the explosion of a semi-preformed fragment warhead is carried out. By comparing and analyzing the numerical results and experimental data, it is found that the initiation manners have great influence on scattering characteristics of semi-preformed fragment warhead. The researcher work of this paper would provide an effective alternative method to optimize the design of warhead.

Effect of main inclusions on crack initiation in bearing steel in the very high cycle fatigue regime

This work aims to investigate the effect of main inclusions on crack initiation in bearing steel in the very high cycle fatigue（VHCF） regime. The size and type of inclusions in the steel were quantitatively analyzed, and VHCF tests were performed. Some fatigue cracks were found to be initiated in the gaps between inclusions（Al2 O3, Mg O-Al2 O3） and the matrix, while other cracks originated from the interior of inclusions（Ti N, Mn S）. To explain the related mechanism, the tessellated stresses between inclusions and the matrix were calculated and compared with the yield stress of the matrix. Results revealed that the inclusions could be classified into two types under VHCF; of these two, only one type could be regarded as holes. Findings in this research provide a better understanding of how inclusions affect the high cycle fatigue properties of bearing steel.

Crystal lattice free volume in a study of initiation reactivity of nitramines:Impact sensitivity

More detailed analysis of a mutual relationship of impact sensitivity(detected by sound) and crystal lattice free volume, △V, for the 18 nitramines shows that its course is not unequivocal. For a part of the studied compounds this sensitivity has increased with increase of the AV values, but for fairly big number of nitramines the relationship works in the opposite direction, especially for data of 1,3,5-trinitro-1,3,5-triazinane, 1,3,5,7-tetranitro-1,3,5,7-tetrazocane. and β-and ε-polymorphs of 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane. Initiation reactivity of technical ε-polymorph of 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane gives the impression by disorderliness in distribution of the actions of forces in its crystal lattice in comparison with its RS(reduced sensitivity) or chemically pure analogue. Limitations of partial shapes of the mentioned relationship by the molecular-structural similarity, and already published information about the decisive factors governing the crystal structure, signalizes a higher influence of the intermolecular interactions in a crystal lattice in comparison with influence of the crystal lattice free volume for initiation of the crystalline EMs.

Crystal lattice free volume in a study of initiation reactivity of nitramines:Friction sensitivity

The relationship between friction sensitivity(FS) and the crystal lattice free space per molecule, △V. of thirteen nitramines is described by a linear equation, divided into a number of the partial relationships with strong limitations by their molecular structure characteristics. Increasing FS due to raising of the △V values is not clearly confirmed. The influence of the △V values on friction sensitivity of nitramines is similar to that of their aza atoms which influence the mutual orientations of nitro groups in neighboring molecules. The dipole-dipole interaction of the oxygen and nitrogen atoms of nitro groups in neighboring nitramine molecules has a major effect on their own FS. In accordance with this interaction, a directly proportional relationship was derived between FS and the intrinsic gas phase molecular volume, V_(int), of the nitramines mentioned, which is divided also into several straight lines according to relatively tight molecular structure similarity. The relationships found again confirm a level of disorder in the distribution of the forces in the crystal lattice of the "common" quality of ε-2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane, in comparison with its reduced sensitivity(RS) or chemically pure analogue.

Simulation on damage effectiveness of hexagonal prism aimable warhead with multi-point synchronous initiations

In order to study the impacts of warhead geometry and initiation pattern on the lethality of aimable warhead, multi-point synchronous initiated hexagonal prism and cylindrical warheads were compared through numerical simulation, combined with theoretical formulas of fragment decelera- tion and target plugging. Enhancements of fragment velocity, kinetic energy and density toward the target and target destructions were analyzed. The results show that hexagonal prism warhead can produce dense fragment beams and enhance average velocity and kinetic energy with asymmetric eight-point initiation by 24. 13% and 54. 52% respectively, which are higher than those of the isomet- ric or same weight cylindrical warhead. The effective fragments are still relatively concentrated in an area of 8 m × 2 m for the hexagonal prism warhead when the distance between warhead and target is 40 m.

Fatigue Crack Initiation Potential from Defects in terms of Local Stress Analysis

The competition of surface and subsurface crack initiation induced failure is critical to understand very high cycle fatigue（VHCF） behavior, which necessitates the elucidation of the underlying mechanisms for the transition of crack initiation from surface to interior defects. Crack initiation potential in materials containing defects is investigated numerically by focusing on defect types, size, shape, location, and residual stress influences. Results show that the crack initiation potency is higher in case of serious property mismatching between matrix and defects, and higher strength materials are more sensitive to soft inclusions（elastic modulus lower than the matrix）. The stress localization around inclusions are correlated to interior crack initiation mechanisms in the VHCF regime such as inclusion-matrix debonding at soft inclusions and inclusion-cracking for hard inclusions（elastic modulus higher than the matrix）. It is easier to emanate cracks from the subsurface pores with the depth 0.7 times as large as their diameter. There exists an inclusion size independent region for crack incubation, outside which crack initiation will transfer from the subsurface soft inclusion to the interior larger one. As for elliptical inclusions, reducing the short-axis length can decrease the crack nucleation potential and promote the interior crack formation, whereas the long-axis length controls the site of peak stress concentration. The compressive residual stress at surface is helpful to shift crack initiation from surface to interior inclusions. Some relaxation of residual stress can not change the inherent crack initiation from interior inclusions in the VHCF regime. The work reveals the crack initiation potential and the transition among various defects under the influences of both intrinsic and extrinsic factors in the VHCF regime, and is helpful to understand the failure mechanism of materials containing defects under long-term cyclic loadings.

Geochemical cycling during subduction initiation:Evidence from serpentinized mantle wedge peridotite in the south Andaman ophiolite suite

The ophiolite suite from south Andaman Islands forms part of the Tethyan Ophiolite Belt and preserves the remnants of an ideal ophiolite sequence comprising a basal serpentinized and tectonised mantle peridotite followed by ultramafic and mafic cumulate units, basaltic dykes and spilitic pillow basalts interlayered with arkosic wacke. Here, we present new major, trace, rare earth(REE) and platinum group(PGE) element data for serpentinized and metasomatized peridotites(dunites) exposed in south Andaman representing the tectonized mantle section of the ophiolite suite. Geochemical features of the studied rocks, marked by Al_2 O_3/TiO_2 > 23, LILE-LREE enrichment, HFSE depletion, and U-shaped chondrite-normalized REE patterns with(La/Sm)N > 1 and(Gd/Yb)N <1, suggest contributions from boninitic mantle melts. These observations substantiate a subduction initiation process ensued by rapid slab roll-back with extension and seafloor spreading in an intraoceanic fore-arc regime. The boninitic composition of the serpentinized peridotites corroborate fluid and melt interaction with mantle manifested in terms of(i) hydration, metasomatism and serpentinization of depleted, MORB-type, sub-arc wedge mantle residual after repeated melt extraction; and(ii) refertilization of refractory mantle peridotite by boninitic melts derived at the initial stage of intraoceanic subduction. Serpentinized and metasomatized mantle dunites in this study record both MOR and intraoceanic arc signatures collectively suggesting suprasubduction zone affinity. The elevated abundances of Pd(4.4-12.2 ppb) with highΣPPGE/∑IPGE(2-3) and Pd/Ir(2-5.5) ratios are in accordance with extensive melt-rock interaction through percolation of boninitic melts enriched in fluid-fluxed LILE-LREE into the depleted mantle after multiple episodes of melt extraction. The high Pd contents with relatively lower Ir concentrations of the samples are analogous to characteristic PGE signatures of boninitic magmas and might have resulted by the infiltration of boninitic melts into the depleted and residual mantle wedge peridotite during fore-arc extension at the initial stage of intraoceanic subduction. The PGE patterns with high Os + Ir(2-8.6 ppb)and Ru(2.8-8.4 ppb) also suggest mantle rejuvenation by infiltration of melts derived by high degree of mantle melting. The trace, REE and PGE data presented in our study collectively reflect heterogeneous mantle compositions and provide insights into ocean-crust-mantle interaction and associated geochemical cycling within a suprasubduction zone regime.

Initiation of plate tectonics in the Hadean: Eclogitization triggered by the ABEL Bombardment

When plate tectonics began on the Earth has been long debated and here we argue this topic based on the records of Earth-Moon geology and asteroid belt to conclude that the onset of plate tectonics was during the middle Hadean（4.37-4.20 Ga）. The trigger of the initiation of plate tectonics is the ABEL Bombardment, which delivered oceanic and atmospheric components on a completely dry reductive Earth, originally comprised of enstatite chondrite-like materials. Through the accretion of volatiles, shock metamorphism processed with vaporization of both CI chondrite and supracrustal rocks at the bombarded location, and significant recrystallization went through under wet conditions, caused considerable eclogitization in the primordial continents composed of felsic upper crust of 21 km thick anorthosite, and 50 km or even thicker KREEP lower crust. Eclogitization must have yielded a powerful slab-pull force to initiate plate tectonics in the middle Hadean. Another important factor is the size of the bombardment. By creating Pacific Ocean class crater by 1000 km across impactor, rigid plate operating stagnant lid tectonics since the early Hadean was severely destroyed, and oceanic lithosphere was generated to have bi-modal lithosphere on the Earth to enable the operation of plate tectonics.Considering the importance of the ABEL Bombardment event which initiated plate tectonics including the appearance of ocean and atmosphere, we propose that the Hadean Eon can be subdivided into three periods：（1） early Hadean（4.57-4.37 Ga）,（2） middle Hadean（4.37-4.20 Ga）, and（3） late Hadean（4.20-4.00 Ga）.