A FLEXIBLE OBJECTIVE-CONSTRAINT APPROACH AND A NEW ALGORITHM FOR CONSTRUCTING THE PARETO FRONT OF MULTIOBJECTIVE OPTIMIZATION PROBLEMS

In this article, a novel scalarization technique, called the improved objective-constraint approach, is introduced to find efficient solutions of a given multiobjective programming problem. The presented scalarized problem extends the objective-constraint problem. It is demonstrated that how adding variables to the scalarized problem, can lead to find conditions for (weakly, properly) Pareto optimal solutions. Applying the obtained necessary and sufficient conditions, two algorithms for generating the Pareto front approximation of bi-objective and three-objective programming problems are designed. These algorithms are easy to implement and can achieve an even approximation of (weakly, properly) Pareto optimal solutions. These algorithms can be generalized for optimization problems with more than three criterion functions, too. The effectiveness and capability of the algorithms are demonstrated in test problems.

Multiobjective Differential Evolution for Higher-Dimensional Multimodal Multiobjective Optimization

In multimodal multiobjective optimization problems(MMOPs),there are several Pareto optimal solutions corre-sponding to the identical objective vector.This paper proposes a new differential evolution algorithm to solve MMOPs with higher-dimensional decision variables.Due to the increase in the dimensions of decision variables in real-world MMOPs,it is diffi-cult for current multimodal multiobjective optimization evolu-tionary algorithms(MMOEAs)to find multiple Pareto optimal solutions.The proposed algorithm adopts a dual-population framework and an improved environmental selection method.It utilizes a convergence archive to help the first population improve the quality of solutions.The improved environmental selection method enables the other population to search the remaining decision space and reserve more Pareto optimal solutions through the information of the first population.The combination of these two strategies helps to effectively balance and enhance conver-gence and diversity performance.In addition,to study the per-formance of the proposed algorithm,a novel set of multimodal multiobjective optimization test functions with extensible decision variables is designed.The proposed MMOEA is certified to be effective through comparison with six state-of-the-art MMOEAs on the test functions.

Analysis and Research on Mechanical Stress and Multiobjective Optimization of Synchronous Reluctance Motor

The mechanical strength of the synchronous reluctance motor(SynRM)has always been a great challenge.This paper presents an analysis method for assessing stress equivalence and magnetic bridge stress interaction,along with a multiobjective optimization approach.Considering the complex flux barrier structure and inevitable stress concentration at the bridge,the finite element model suitable for SynRM is established.Initially,a neural network structure with two inputs,one output,and three layers is established.Continuous functions are constructed to enhance accuracy.Additionally,the equivalent stress can be converted into a contour distribution of a three-dimensional stress graph.The contour line distribution illustrates the matching scheme for magnetic bridge lengths under equivalent stress.Moreover,the paper explores the analysis of magnetic bridge interaction stress.The optimization levels corresponding to the length of each magnetic bridge are defined,and each level is analyzed by the finite element method.The Taguchi method is used to determine the specific gravity of the stress source on each magnetic bridge.Based on this,a multiobjective optimization employing the Multiobjective Particle Swarm Optimization(MOPSO)technique is introduced.By taking the rotor magnetic bridge as the design parameter,ten optimization objectives including air-gap flux density,sinusoidal property,average torque,torque ripple,and mechanical stress are optimized.The relationship between the optimization objectives and the design parameters can be obtained based on the response surface method(RSM)to avoid too many experimental samples.The optimized model is compared with the initial model,and the optimized effect is verified.Finally,the temperature distribution of under rated working conditions is analyzed,providing support for addressing thermal stress as mentioned earlier.

A New Multiobjective Particle Swarm Optimization Using Local Displacement and Local Guides

This paper introduces a novel variant of particle swarm optimization that leverages local displacements through attractors for addressing multiobjective optimization problems. The method incorporates a square root distance mechanism into the external archives to enhance the diversity. We evaluate the performance of the proposed approach on a set of constrained and unconstrained multiobjective test functions, establishing a benchmark for comparison. In order to gauge its effectiveness relative to established techniques, we conduct a comprehensive comparison with well-known approaches such as SMPSO, NSGA2 and SPEA2. The numerical results demonstrate that our method not only achieves efficiency but also exhibits competitiveness when compared to evolutionary algorithms. Particularly noteworthy is its superior performance in terms of convergence and diversification, surpassing the capabilities of its predecessors.

MULTIOBJECTIVE OPTIMIZATION OF EIGHT-DOF VEHICLE SUSPENSION BASED ON GAME THEORY

A systematic and effective optimization is proposed for the design of a three-dimensional （3-D） vehicle suspension model with eight degrees of freedom （DOF）, including vertical seat motion, vehicle suspension, pitching and rolling motions, and vertical wheel motions using the evolutionary game theory. A new design of the passive suspension is aided by game theory to attain the best compromise between ride quality and suspension deflections. Extensive simulations are performed on three type road surface models A, B, C pavement grades based on the guidelines provided by ISO-2631 with the Matlab/Simulink environment. The preliminary results show that, when the passive suspension is optimized via the proposed approach, a substantial improvement in the vertical ride quality is obtained while keeping the suspension deflections within their allowable clearance when the vehicle moves at a constant velocity v=20 m/s, and the comfort performance of a suspension seat can be enhanced by 20%-30%.

Multiobjective Optimization of Simulated Moving Bed by Tissue P System

The binaphthol enantiomers separation process using simulation moving bed technology is simulated with the true moving bed approach （TMB）. In order to systematically optimize the process with multiple productive objectives, this article develops a variant of tissue P system （TPS）. Inspired by general tissue P systems, the special TPS has a tissue-like structure with several membranes. The key rules of each membrane are the communication rule and mutation rule. These characteristics contribute to the diversity of the population, the conquest of the multimodal of objective function, and the convergence of algorithm. The results of comparison with a popular algorithm——the non-dominated sorting genetic algorithm 2（NSGA-2） illustrate that the new algorithm has satisfactory performance. Using the algorithm, this study maximizes synchronously several conflicting objectives, purities of different products, and productivity.

Multiobjective Optimization of the Industrial Naphtha Catalytic Re-forming Process

In this article, a multiobjective optimization strategy for an industrial naphtha continuous catalytic reform-ing process that aims to obtain aromatic products is proposed. The process model is based on a 20-lumped kinetics re-action network and has been proved to be quite effective in terms of industrial application. The primary objectives in-clude maximization of yield of the aromatics and minimization of the yield of heavy aromatics. Four reactor inlet tem-peratures, reaction pressure, and hydrogen-to-oil molar ratio are selected as the decision variables. A genetic algorithm, which is proposed by the authors and named as the neighborhood and archived genetic algorithm (NAGA), is applied to solve this multiobjective optimization problem. The relations between each decision variable and the two objectives are also proposed and used for choosing a suitable solution from the obtained Pareto set.

Multiobjective optimization and multivariable control of the beer fermentation process with the use of evolutionary algorithms

This paper describes empirical research on the model, optimization and supervisory control of beer fermentation.Conditions in the laboratory were made as similar as possible to brewery industry conditions. Since mathematical models that consider realistic industrial conditions were not available, a new mathematical model design involving industrial conditions was first developed. Batch fermentations are multiobjective dynamic processes that must be guided along optimal paths to obtain good results.The paper describes a direct way to apply a Pareto set approach with multiobjective evolutionary algorithms (MOEAs).Successful finding of optimal ways to drive these processes were reported.Once obtained, the mathematical fermentation model was used to optimize the fermentation process by using an intelligent control based on certain rules.

Solving Multitrip Pickup and Delivery Problem With Time Windows and Manpower Planning Using Multiobjective Algorithms

The multitrip pickup and delivery problem with time windows and manpower planning(MTPDPTW-MP)determines a set of ambulance routes and finds staff assignment for a hospital. It involves different stakeholders with diverse interests and objectives. This study firstly introduces a multiobjective MTPDPTW-MP(MO-MTPDPTWMP) with three objectives to better describe the real-world scenario. A multiobjective iterated local search algorithm with adaptive neighborhood selection(MOILS-ANS) is proposed to solve the problem. MOILS-ANS can generate a diverse set of alternative solutions for decision makers to meet their requirements. To better explore the search space, problem-specific neighborhood structures and an adaptive neighborhood selection strategy are carefully designed in MOILS-ANS. Experimental results show that the proposed MOILS-ANS significantly outperforms the other two multiobjective algorithms. Besides, the nature of objective functions and the properties of the problem are analyzed. Finally, the proposed MOILS-ANS is compared with the previous single-objective algorithm and the benefits of multiobjective optimization are discussed.

Multiobjective optimization scheme for industrial synthesis gas sweetening plant in GTL process

In industrial amine plants the optimized operating conditions are obtained from the conclusion of occurred events and challenges that are normal in the working units. For the sake of reducing the costs, time consuming, and preventing unsuitable accidents, the optimization could be performed by a computer program. In this paper, simulation and parameter analysis of amine plant is performed at first. The optimization of this unit is studied using Non-Dominated Sorting Genetic Algorithm-II in order to produce sweet gas with CO 2 mole percentage less than 2.0% and H 2 S concentration less than 10 ppm for application in Fischer-Tropsch synthesis. The simulation of the plant in HYSYS v.3.1 software has been linked with MATLAB code for real-parameter NSGA-II to simulate and optimize the amine process. Three scenarios are selected to cover the effect of （DEA/MDEA） mass composition percent ratio at amine solution on objective functions. Results show that sour gas temperature and pressure of 33.98 ？ C and 14.96 bar, DEA/CO 2 molar flow ratio of 12.58, regeneration gas temperature and pressure of 94.92 ？ C and 3.0 bar, regenerator pressure of 1.53 bar, and ratio of DEA/MDEA = 20%/10% are the best values for minimizing plant energy consumption, amine circulation rate, and carbon dioxide recovery.

Multiobjective fault detection and isolation for flexible air-breathing hypersonic vehicle

An application of the multiobjective fault detection and isolation（FDI） approach to an air-breathing hypersonic vehicle（HSV） longitudinal dynamics subject to disturbances is presented.Maintaining sustainable and safe flight of HSV is a challenging task due to its strong coupling effects,variable operating conditions and possible failures of system components.A common type of system faults for aircraft including HSV is the loss of effectiveness of its actuators and sensors.To detect and isolate multiple actuator/sensor failures,a faulty linear parameter-varying（LPV） model of HSV is derived by converting actuator/system component faults into equivalent sensor faults.Then a bank of LPV FDI observers is designed to track individual fault with minimum error and suppress the effects of disturbances and other fault signals.The simulation results based on the nonlinear flexible HSV model and a nominal LPV controller demonstrate the effectiveness of the fault estimation technique for HSV.

Multiobjective optimal dispatch of microgrid based on analytic hierarchy process and quantum particle swarm optimization

Owing to the rapid development of microgrids(MGs)and growing applications of renewable energy resources,multiobjective optimal dispatch of MGs need to be studied in detail.In this study,a multiobjective optimal dispatch model is developed for a standalone MG composed of wind turbines,photovoltaics,diesel engine unit,load,and battery energy storage system.The economic cost,environmental concerns,and power supply consistency are expressed via subobjectives with varying priorities.Then,the analytic hierarchy process algorithm is employed to reasonably specify the weight coefficients of the subobjectives.The quantum particle swarm optimization algorithm is thereafter employed as a solution to achieve optimal dispatch of the MG.Finally,the validity of the proposed model and solution methodology are con firmed by case studies.This study provides refere nee for mathematical model of multiojective optimizati on of MG and can be widely used in current research field.

Hybrid particle swarm optimization for multiobjective resource allocation

Resource allocation （RA） is the problem of allocating resources among various artifacts or business units to meet one or more expected goals, such a.s maximizing the profits, minimizing the costs, or achieving the best qualities. A complex multiobjective RA is addressed, and a multiobjective mathematical model is used to find solutions efficiently. Then, all improved particie swarm algorithm （mO_PSO） is proposed combined with a new particle diversity controller policies and dissipation operation. Meanwhile, a modified Pareto methods used in PSO to deal with multiobjectives optimization is presented. The effectiveness of the provided algorithm is validated by its application to some illustrative example dealing with multiobjective RA problems and with the comparative experiment with other algorithm.

Multiobjective extremal optimization with applications to engineering design

In this paper, we extend a novel unconstrained multiobjective optimization algorithm, so-called multiobjective extremal optimization （MOEO）, to solve the constrained multiobjective optimization problems （MOPs）. The proposed approach is validated by three constrained benchmark problems and successfully applied to handling three multiobjective engineering design problems reported in literature. Simulation results indicate that the proposed approach is highly competitive with three state-of-the-art multiobjective evolutionary algorithms, i.e., NSGA-11, SPEA2 and PAES. Thus MOEO can be considered a good alternative to solve constrained multiobjective optimization problems.

Hierarchical Algorithms of Large-Scale Systems with Nonseparable Multiobjective

A class of large-scale hierarchical control systems is considered, the overall objective function is a nonlinear and nonseparable function of multiple quadratic performance indices.The separation strategy of the multiobjective optimization technique and the three-level objective coordination method are applied to the large -sacle systems, and a four-level hierarchical algorithms of optimization control is obtained.

A multiobjective evolutionary optimization method based critical rainfall thresholds for debris flows initiation

At present,most researches on the critical rainfall threshold of debris flow initiation use a linear model obtained through regression.With relatively weak fault tolerance,this method not only ignores nonlinear effects but also is susceptible to singular noise samples,which makes it difficult to characterize the true quantization relationship of the rainfall threshold.Besides,the early warning threshold determined by statistical parameters is susceptible to negative samples(samples where no debris flow has occurred),which leads to uncertainty in the reliability of the early warning results by the regression curve.To overcome the above limitations,this study develops a data-driven multiobjective evolutionary optimization method that combines an artificial neural network(ANN)and a multiobjective evolutionary optimization implemented by particle swarm optimization(PSO).Firstly,the Pareto optimality method is used to represent the nonlinear and conflicting critical thresholds for the rainfall intensity I and the rainfall duration D.An ANN is used to construct a dual-target(dual-task)predictive surrogate model,and then a PSO-based multiobjective evolutionary optimization algorithm is applied to train the ANN and stochastically search the trained ANN for obtaining the Pareto front of the I-D surrogate prediction model,which is intended to overcome the limitations of the existing linear regression-based threshold methods.Finally,a double early warning curve model that can effectively control the false alarm rate and negative alarm rate of hazard warnings are proposed based on the decision space and target space maps.This study provides theoretical guidance for the early warning and forecasting of debris flows and has strong applicability.

A Novel Multiobjective Fireworks Algorithm and Its Applications to Imbalanced Distance Minimization Problems

Recently,multimodal multiobjective optimization problems(MMOPs)have received increasing attention.Their goal is to find a Pareto front and as many equivalent Pareto optimal solutions as possible.Although some evolutionary algorithms for them have been proposed,they mainly focus on the convergence rate in the decision space while ignoring solutions diversity.In this paper,we propose a new multiobjective fireworks algorithm for them,which is able to balance exploitation and exploration in the decision space.We first extend a latest single-objective fireworks algorithm to handle MMOPs.Then we make improvements by incorporating an adaptive strategy and special archive guidance into it,where special archives are established for each firework,and two strategies(i.e.,explosion and random strategies)are adaptively selected to update the positions of sparks generated by fireworks with the guidance of special archives.Finally,we compare the proposed algorithm with eight state-of-the-art multimodal multiobjective algorithms on all 22 MMOPs from CEC2019 and several imbalanced distance minimization problems.Experimental results show that the proposed algorithm is superior to compared algorithms in solving them.Also,its runtime is less than its peers'.

STABILITY OF MAJORLY EFFICIENT POINTS AND SOLUTIONS IN MULTIOBJECTIVE PROGRAMMING

In this paper, we obtain some other properties of the majorly efficient points and solutions of the multiobjective optimization presellted in two previous papers of Hu. By decomposing the major cone, which is non-pointed, non-convex and non-closed into a finite union of disjoint strictly supported pointed convex cones, we discuss the continuous perturbations of the decision space. Several sufficient conditions for the continuity of the sets of majorly efficiellt points and solutions are given.

Reliability based multiobjective optimization for design of structures subject to random vibrations

Based on a multiobjective approach whose objective function (OF) vector collects stochastic reliability performance and structural cost indices, a structural optimization criterion for mechanical systems subject to random vibrations is presented for supporting engineer’s design. This criterion differs from the most commonly used conventional optimum design criterion for random vibrating structure, which is based on minimizing displacement or acceleration variance of main structure responses, without considering explicitly required performances against failure. The proposed criterion can properly take into account the design-reliability required performances, and it becomes a more efficient support for structural engineering decision making. The multiobjective optimum (MOO) design of a tuned mass damper (TMD) has been developed in a typical seismic design problem, to control structural vibration induced on a multi-storey building structure excited by nonstationary base acceleration random process. A numerical example for a three-storey building is developed and a sensitivity analysis is carried out. The results are shown in a useful manner for TMD design decision support.

Robust Multiobjective and Multidisciplinary Design Optimization of Electrical Drive Systems

Design and optimization of electrical drive systems often involve simultaneous consideration of multiple objectives that usually contradict to each other and multiple disciplines that normally coupled to each other.This paper aims to present efficient system-level multiobjective optimization methods for the multidisciplinary design optimization of electrical drive systems.From the perspective of quality control,deterministic and robust approaches will be investigated for the development of the optimization models for the proposed methods.Meanwhile,two approximation methods,Kriging model and Taylor expansion are employed to decrease the computation/simulation cost.To illustrate the advantages of the proposed methods,a drive system with a permanent magnet synchronous motor driven by a field oriented control system is investigated.Deterministic and robust Pareto optimal solutions are presented and compared in terms of several steady-state and dynamic performances(like average torque and speed overshoot)of the drive system.The robust multiobjective optimization method can produce optimal Pareto solutions with high manufacturing quality for the drive system.