Objective To improve the management level of pharmacy dispensing center,reduce dispensing errors and promote the safety of drug use.Methods Hospital pharmacies could be managed according to the theory of quality contr...Objective To improve the management level of pharmacy dispensing center,reduce dispensing errors and promote the safety of drug use.Methods Hospital pharmacies could be managed according to the theory of quality control circle(QCC).Based on the ten steps of QCC,the internal difference error rate in pharmacies could be reduced.Results and Conclusion The error rate of pharmacies was reduced from 2.74‰to 0.57‰,and the goal achievement rate was 108.466.Besides,the progress rate reached 84.82%.The abilities of circle members were improved,and the operation of pharmacy was more standardized.The activity of QCC is helpful to reduce the internal difference error rate,improve the operation level of pharmacy and ensure the safety of drug use.展开更多
Many prior research findings indicate that audit quality differs between the Big 4 and non-Big 4 audit firms using an indicator variable. However, most previous research focuses on only outcome measures, such as audit...Many prior research findings indicate that audit quality differs between the Big 4 and non-Big 4 audit firms using an indicator variable. However, most previous research focuses on only outcome measures, such as audit fees, going concern reports, and non-audit services. This study investigates audit quality differentiation between the Big 4 and non-Big 4 audit firms hypothesis from an audit objective point of view. One of the material objectives of Japanese internal control audit institutions is to facilitate assessment and improvement of internal controls by corporations themselves. The findings of this study indicate that the Big 4 audit firms accomplish this objective better than non-Big 4 audit firms. Consequently, most Big 4 clients do not disclose significant deficiencies (SDs), implying that they improve the quality of internal controls through internal controls auditing. This paper concludes that Big 4 firms produce a higher audit quality level than non-Big 4 firms, and this quality difference iS related to how an audit objective is interpreted and implemented.展开更多
The purpose of this paper is to examine the effect of the board of directors,namely board size,board independence,and CEO duality,as well as audit quality on the disclosure of internal control information.The sample c...The purpose of this paper is to examine the effect of the board of directors,namely board size,board independence,and CEO duality,as well as audit quality on the disclosure of internal control information.The sample consists of 164 European companies listed in the STOXX Europe 600.Based on positive agency theory,the authors posit that board of directors and audit quality influence corporate internal control disclosure practice.The content analysis and the design of the evaluation criterion were used to calculate the disclosure index of internal control.Thus,multiple regression analysis is utilized to analyze the results of this paper.The average internal control information disclosure index was 0.285,indicating that most of the companies in our sample do not disclose enough information about the internal control.This low level of forward-looking information disclosure makes it very difficult for corporate stakeholders to determine the future performance of the company.Multivariate results indicate that internal control disclosure is positively and significantly associated with board independence,CEO duality,and audit quality.This study contributes to the literature on the various governance characteristics and disclosure by showing that the disclosure of internal control information in European countries is positively and significantly associated with board independence,separation of duties,and audit quality.Our study was based on a sample of European companies including countries regulating IC disclosure as well as unregulated settings.As noted by Bedard and Graham(2014),regulatory differences in countries can contribute insights on the costs and benefits of disclosure.Findings also have policy implications for investors,managers,and regulators.展开更多
The management of a modern company is faced with the need to make business decisions regarding the achievement of business goals.Increased interest in establishing internal control is affected by the presence increase...The management of a modern company is faced with the need to make business decisions regarding the achievement of business goals.Increased interest in establishing internal control is affected by the presence increased corruption and the erosion of business morality.For internal controls,everyone is interested,from external auditors to management,board of directors,shareholders of large public companies and the state.With the constant growth of the company,the decentralization of business has been compounded by the management process.Therefore,in addition to internal control,internal audit is required.The company’s management cannot deal with oversight because it has to deal with strategic issues.This is where internal audit is performed as an expert service.The results of the conducted empirical research showed that the stages of development of internal control in enterprises in Montenegro do not correspond with the achieved degree of development of this profession in the countries of the developed market economy.展开更多
The propagation form of internal cracks induced by continuous casting soft reduction and the control strategy for enhancing the internal quality of 45 steel through industrial trials and a three-dimensional flow-heat ...The propagation form of internal cracks induced by continuous casting soft reduction and the control strategy for enhancing the internal quality of 45 steel through industrial trials and a three-dimensional flow-heat transfer-solidification coupling model were investigated.The results showed that the internal cracks induced by soft reduction exhibited a characteristic of being"coarse in the middle and fine at both ends",and displayed an elliptical arc distribution on the loose side of the strand cross section.The cracks originated within the brittle temperature range and propagated inward to the liquid impenetrable temperature and outward to the zero ductility temperature or below.The control strategy for enhancing the internal quality of the 45 steel strand through soft reduction is to adjust the casting speed or the reduction zone appropriately,ensuring that the central solid fraction of the reduction zone falls within the range of 0.33-0.99.At this point,a reasonable reduction amount is allocated to eliminate the center shrinkage cavities and center segregation,even if it results in minor reduction-induced cracks.展开更多
Based on data from China’s A-share listed companies from 2008 to 2017,this paper examines the influence of the contemporary values of Confucianism,namely benevolence,righteousness,propriety,wisdom,and fidelity on the...Based on data from China’s A-share listed companies from 2008 to 2017,this paper examines the influence of the contemporary values of Confucianism,namely benevolence,righteousness,propriety,wisdom,and fidelity on the effectiveness of internal control.It indicates a significant positive correlation between the contemporary values of Confucianism and the effectiveness of internal control.Furthermore,this positive influence is noticeable in family-owned businesses but is unobserved in foreign-invested enterprises in China.In addition,the contemporary values of Confucianism enhance internal control quality through two pathways:promotion incentives and corporate reputation.In regions with lower degrees of openness,lower levels of rule of law and slower marketization,or in companies facing operational crises,the contemporary values of Confucianism have a more pronounced effect on enhancing the effectiveness of internal control.The contemporary values of Confucianism have strengthened the ability of internal control to decrease agency costs and mitigate the negative influence of internal control on risk-taking.展开更多
Selective laser melting(SLM)is a 3D printing technology with a high near-net-shape ability and forming accuracy.However,the inevitable internal defects significantly hinder its development.Therefore,it is essential to...Selective laser melting(SLM)is a 3D printing technology with a high near-net-shape ability and forming accuracy.However,the inevitable internal defects significantly hinder its development.Therefore,it is essential to fully understand the causes of internal defects in SLM processing and minimize the defects to achieve quality control accordingly.This work reviews the recent studies on internal defects in SLM,presenting the main internal defects of SLM as impurities,lack of fusion,gas pores,and micro-crack.These internal defects occur on the various phenomena in the laser-powder-melt pool(LPMP)stage.The formation of SLM internal defects is mainly affected by oxidation,denudation,balling,spatter,and keyholes;here,balling,spattering,and the keyhole phenomenon are the main factors causing internal defects in LPMP.Hence,this paper focuses on reviewing the balling effect,spatter behavior,and keyhole phenomenon,introducing the action mechanism of the above three phenomena under different process conditions.Additionally,the spatter behavior when forming internal defects is proposed.This review also considers the correlation between the spatter behavior and keyhole phenomenon and makes an important contribution to understanding and reducing SLM internal defects.It presents a reliable opinion on real-time monitoring and machine intelligent learning for SLM processing in the future,as well as supporting a systematic thinking for the suppression of defect formation in SLM.展开更多
The setting-up of the Malaysian Audit Oversight Board (AOB) in 2010 under the Securities Commission Amendment Act 2010 has extended the role of regulators into the statutory audit domain for public listed companies....The setting-up of the Malaysian Audit Oversight Board (AOB) in 2010 under the Securities Commission Amendment Act 2010 has extended the role of regulators into the statutory audit domain for public listed companies. Although the auditing profession in Malaysia has International Auditing Standards as prescribed minimum level of quality in the delivery of audit assurance services, self-regulation by the profession alone appears inadequate to ensure the delivery of quality audit services. With co-regulation, auditors now are monitored not just by the profession but also by a new statutory body with considerable regulatory powers to sanction auditors where quality of the audit process has been found wanting. This study solicits the opinions of auditors on their expectations of what the new regulator can achieve. Based on interviews with a sample of 30 auditors, the study finds that the majority believe that audit quality will be taken to a new level following AOB's remit of registration of auditors, compliance inspection with International Standard on Quality Control (ISQC), monitoring of financial statement quality, and its power of sanctions. A review of AOB's early years' inspection confirms these expectations.展开更多
基金Source of the project:General Project of Liaoning Social Science Planning Fund[No.L19BGL034]。
文摘Objective To improve the management level of pharmacy dispensing center,reduce dispensing errors and promote the safety of drug use.Methods Hospital pharmacies could be managed according to the theory of quality control circle(QCC).Based on the ten steps of QCC,the internal difference error rate in pharmacies could be reduced.Results and Conclusion The error rate of pharmacies was reduced from 2.74‰to 0.57‰,and the goal achievement rate was 108.466.Besides,the progress rate reached 84.82%.The abilities of circle members were improved,and the operation of pharmacy was more standardized.The activity of QCC is helpful to reduce the internal difference error rate,improve the operation level of pharmacy and ensure the safety of drug use.
文摘Many prior research findings indicate that audit quality differs between the Big 4 and non-Big 4 audit firms using an indicator variable. However, most previous research focuses on only outcome measures, such as audit fees, going concern reports, and non-audit services. This study investigates audit quality differentiation between the Big 4 and non-Big 4 audit firms hypothesis from an audit objective point of view. One of the material objectives of Japanese internal control audit institutions is to facilitate assessment and improvement of internal controls by corporations themselves. The findings of this study indicate that the Big 4 audit firms accomplish this objective better than non-Big 4 audit firms. Consequently, most Big 4 clients do not disclose significant deficiencies (SDs), implying that they improve the quality of internal controls through internal controls auditing. This paper concludes that Big 4 firms produce a higher audit quality level than non-Big 4 firms, and this quality difference iS related to how an audit objective is interpreted and implemented.
文摘The purpose of this paper is to examine the effect of the board of directors,namely board size,board independence,and CEO duality,as well as audit quality on the disclosure of internal control information.The sample consists of 164 European companies listed in the STOXX Europe 600.Based on positive agency theory,the authors posit that board of directors and audit quality influence corporate internal control disclosure practice.The content analysis and the design of the evaluation criterion were used to calculate the disclosure index of internal control.Thus,multiple regression analysis is utilized to analyze the results of this paper.The average internal control information disclosure index was 0.285,indicating that most of the companies in our sample do not disclose enough information about the internal control.This low level of forward-looking information disclosure makes it very difficult for corporate stakeholders to determine the future performance of the company.Multivariate results indicate that internal control disclosure is positively and significantly associated with board independence,CEO duality,and audit quality.This study contributes to the literature on the various governance characteristics and disclosure by showing that the disclosure of internal control information in European countries is positively and significantly associated with board independence,separation of duties,and audit quality.Our study was based on a sample of European companies including countries regulating IC disclosure as well as unregulated settings.As noted by Bedard and Graham(2014),regulatory differences in countries can contribute insights on the costs and benefits of disclosure.Findings also have policy implications for investors,managers,and regulators.
文摘The management of a modern company is faced with the need to make business decisions regarding the achievement of business goals.Increased interest in establishing internal control is affected by the presence increased corruption and the erosion of business morality.For internal controls,everyone is interested,from external auditors to management,board of directors,shareholders of large public companies and the state.With the constant growth of the company,the decentralization of business has been compounded by the management process.Therefore,in addition to internal control,internal audit is required.The company’s management cannot deal with oversight because it has to deal with strategic issues.This is where internal audit is performed as an expert service.The results of the conducted empirical research showed that the stages of development of internal control in enterprises in Montenegro do not correspond with the achieved degree of development of this profession in the countries of the developed market economy.
基金supported by the National Natural Science Foundation of China(NSFC)(Grant No.U1860111).
文摘The propagation form of internal cracks induced by continuous casting soft reduction and the control strategy for enhancing the internal quality of 45 steel through industrial trials and a three-dimensional flow-heat transfer-solidification coupling model were investigated.The results showed that the internal cracks induced by soft reduction exhibited a characteristic of being"coarse in the middle and fine at both ends",and displayed an elliptical arc distribution on the loose side of the strand cross section.The cracks originated within the brittle temperature range and propagated inward to the liquid impenetrable temperature and outward to the zero ductility temperature or below.The control strategy for enhancing the internal quality of the 45 steel strand through soft reduction is to adjust the casting speed or the reduction zone appropriately,ensuring that the central solid fraction of the reduction zone falls within the range of 0.33-0.99.At this point,a reasonable reduction amount is allocated to eliminate the center shrinkage cavities and center segregation,even if it results in minor reduction-induced cracks.
基金supported by project of the National Natural Science Foundation of China(No.71802067).
文摘Based on data from China’s A-share listed companies from 2008 to 2017,this paper examines the influence of the contemporary values of Confucianism,namely benevolence,righteousness,propriety,wisdom,and fidelity on the effectiveness of internal control.It indicates a significant positive correlation between the contemporary values of Confucianism and the effectiveness of internal control.Furthermore,this positive influence is noticeable in family-owned businesses but is unobserved in foreign-invested enterprises in China.In addition,the contemporary values of Confucianism enhance internal control quality through two pathways:promotion incentives and corporate reputation.In regions with lower degrees of openness,lower levels of rule of law and slower marketization,or in companies facing operational crises,the contemporary values of Confucianism have a more pronounced effect on enhancing the effectiveness of internal control.The contemporary values of Confucianism have strengthened the ability of internal control to decrease agency costs and mitigate the negative influence of internal control on risk-taking.
基金National Natural Science Foundation of China(Grant No.51975387).
文摘Selective laser melting(SLM)is a 3D printing technology with a high near-net-shape ability and forming accuracy.However,the inevitable internal defects significantly hinder its development.Therefore,it is essential to fully understand the causes of internal defects in SLM processing and minimize the defects to achieve quality control accordingly.This work reviews the recent studies on internal defects in SLM,presenting the main internal defects of SLM as impurities,lack of fusion,gas pores,and micro-crack.These internal defects occur on the various phenomena in the laser-powder-melt pool(LPMP)stage.The formation of SLM internal defects is mainly affected by oxidation,denudation,balling,spatter,and keyholes;here,balling,spattering,and the keyhole phenomenon are the main factors causing internal defects in LPMP.Hence,this paper focuses on reviewing the balling effect,spatter behavior,and keyhole phenomenon,introducing the action mechanism of the above three phenomena under different process conditions.Additionally,the spatter behavior when forming internal defects is proposed.This review also considers the correlation between the spatter behavior and keyhole phenomenon and makes an important contribution to understanding and reducing SLM internal defects.It presents a reliable opinion on real-time monitoring and machine intelligent learning for SLM processing in the future,as well as supporting a systematic thinking for the suppression of defect formation in SLM.
文摘The setting-up of the Malaysian Audit Oversight Board (AOB) in 2010 under the Securities Commission Amendment Act 2010 has extended the role of regulators into the statutory audit domain for public listed companies. Although the auditing profession in Malaysia has International Auditing Standards as prescribed minimum level of quality in the delivery of audit assurance services, self-regulation by the profession alone appears inadequate to ensure the delivery of quality audit services. With co-regulation, auditors now are monitored not just by the profession but also by a new statutory body with considerable regulatory powers to sanction auditors where quality of the audit process has been found wanting. This study solicits the opinions of auditors on their expectations of what the new regulator can achieve. Based on interviews with a sample of 30 auditors, the study finds that the majority believe that audit quality will be taken to a new level following AOB's remit of registration of auditors, compliance inspection with International Standard on Quality Control (ISQC), monitoring of financial statement quality, and its power of sanctions. A review of AOB's early years' inspection confirms these expectations.