The different investigation has been carried out on the biological activities of titanium dioxide nanoparticle but the effect of this nano product on the antibacterial activity of different antibiotics has not been ye...The different investigation has been carried out on the biological activities of titanium dioxide nanoparticle but the effect of this nano product on the antibacterial activity of different antibiotics has not been yet demonstrated. In this study the nano size TiO2 is synthesized using citric acid and alpha dextrose and the enhancement effect of TiO2 nanoparticle on the antibacterial activity of different antibiotics was evaluated against Methicillin-resistant Staphylococcus aureus (MRSA). During the present study, different concentrations of nano-scale TiO2 were tested to find out the best concentration that can have the most effective antibacterial property against the MRSA culture. Disk diffusion method was used to determine the antibacterial activity of these antibiotics in the absence and presence of sub inhibitory concentration of TiO2 nano particle. A clinical isolate of MRSA, isolated from Intensive Care Unit (ICU) was used as test strain. In the presence of sub-inhibitory concentration of TiO2 nanoparticle (20 μg/disc) the antibacterial activities of all antibiotics have been increased against test strain with minimum 2 mm to maximum 10mm. The highest increase in inhibitory zone for MRSA was observed against pencillin G and amikacin (each 10 mm). Conversely, in case of nalidixic acid, TiO2 nanoparticle showed a Synergic effect on the antibacterial activity of this antibiotic against test strain. These results signify that the TiO2 nanoparticle potentate the antimicrobial action of beta lactums, cephalosporins, aminoglycosides, glycopeptides, macrolids and lincosamides, tetracycline a possible utilization of nano compound in combination effect against MRSA.展开更多
In this study,the workability of cement-based grouts containing n-TiO 2 nanoparticles and fly ash has been investigated experimentally.Several characteristic quantities(including,but not limited to,the marsh cone flow...In this study,the workability of cement-based grouts containing n-TiO 2 nanoparticles and fly ash has been investigated experimentally.Several characteristic quantities(including,but not limited to,the marsh cone flow time,the mini slump spreading diameter and the plate cohesion meter value)have been measured for different percentages of these additives.The use of fly ash as a mineral additive has been found to result in improvements in terms of workability behavior as expected.Moreover,if nano titanium oxide is also used,an improvement can be obtained regarding the bleeding values for the cement-based grout mixes.Using such experimental data,a multi-layer perceptron artificial neural network model has been developed(5 neurons in the hidden layer of the network model have been developed using a total of 42 experimental data).70%of the data employed in this model have been used for training,15%for validation and 15%for the test phase.The results demonstrate that the artificial neural network model can predict Marsh cone flow time,mini slump spreading diameter and plate cohesion meter values with an average error of 0.15%.展开更多
A kind of new nano composite with ultraviolet （UV） ray resistance and high temperature stability was prepared by in-situ polymerization in low temperature. Polysulfonamide （PSA） was synthesized with 4, 4＇-diamin...A kind of new nano composite with ultraviolet （UV） ray resistance and high temperature stability was prepared by in-situ polymerization in low temperature. Polysulfonamide （PSA） was synthesized with 4, 4＇-diaminodiphenyl sulfone （DDS） and terephthaloyl chloride （TPC） in the common solvent N, N-Dimethyl- -acetamide （DMAc）. Nano filler is a certain nano titanium oxide modified by silicon oxide （TMS）, which plays the role of UV resistance additives. Properties of the novel composite materials were characterized by Atomic Force microscopy （AFM）, thermal gravimetric Analysis （TGA） and Ultraviolet Spectroscopy. AFM had showed the sizes and distributions of TMS particles in the nanocomposite. Ultraviolet Spectroscopy for the nanocomposites showed a large absorption in UV band. TGA showed the decomposition temperature was increased over ten degrees with 0.5% wt TMS for this nanocomposite compared with pure PSA.展开更多
<span style="font-family:Verdana;">The use of wood has been considered for a long time and to this day, it has a special place in human life. Modification of wood and lignocellulosic materials is done ...<span style="font-family:Verdana;">The use of wood has been considered for a long time and to this day, it has a special place in human life. Modification of wood and lignocellulosic materials is done by various methods, including modification of physical, mechanical, chemical and thermal, that as a new technology, it leads to the improvement of their undesirable features. Among these methods, heat correction is a useful method to improve dimensional stability and leads to increased resistance to water absorption and decay. The main purpose of this study is to investigate the titanium Nano oxide and heat treatment on the physical properties of hornbeam species. Samples were saturated with titanium Nano oxide solution at a concentration of 5000 ppm and pressurized 7 times in a pressure tank. The samples were divided into three groups: control, heat and Nano thermal treatment. Heat and saturated samples with titanium Nano oxide were heat treated at three temperature levels of 150</span><span style="font-family:""><span style="font-family:Verdana;">℃</span><span style="font-family:Verdana;">, 175</span><span style="font-family:Verdana;">℃</span><span style="font-family:Verdana;"> and 200</span><span style="font-family:Verdana;">℃</span><span style="font-family:Verdana;"> for 4 and 6 hours. All three groups underwent physical tests. Heat and Nano thermal oxide treatments led to reduced water absorption and thickness swelling. Comparison between heat and Nano thermal treatment showed a further decrease in water absorption and thickness swelling in Nano thermal samples.展开更多
The hydrophobic films of TixOy-CmHn. deposited from mixture gases of titanium isopropoxide （TTIP） and oxygen by plasma enhanced chemical vapor deposition （PECVD） were investigated. The films were investigated by s...The hydrophobic films of TixOy-CmHn. deposited from mixture gases of titanium isopropoxide （TTIP） and oxygen by plasma enhanced chemical vapor deposition （PECVD） were investigated. The films were investigated by scanning electron microscope （ SEM ）, transmission electron microscope （ TEM ）, Fourier transform infrared spectrometer （ FTIR）, X-Ray diffraction （ XRD ）, element analysis （ EA ）, ultraviolet visible spectrometer （ UV-Vis）, and water contact angle （WCA）. The results reveal that the surface of the films is formed by mierosized papillaes aggregated by inorganic and organic phases of complex nanoparticles with size from 50 nm to 200 nm when the discharge power is increased from 40 W to 150 W. All fdms demonstrate the strong broad of Ti-O-Ti stretching vibration at 400 -800cm-1, -CH bending vibration at 1 388 cm -1, and broadening -OH stretching vibration at 3 000-3500 cm-1 With the increase of the discharge power, the asdeposited film changes from amorphous to crystallization. The WCA of the film can be as high as 160°, indicating the hydrophobicity. The films show a similar ultraviolet absorption property as the bulk TiO2 film. The composition of the composition of film deposited at 150 W can be formulated as Tio.302-C1.5H3. Therefore, the composition formula of this hydrophobic film could be expressed as TiO2-C5H10O4.7. It is believed that the complex micro/nano structures of TiO2 and C5H10O4.7 residues are responsible for the observed hydrophobicity and the ultraviolet absorption property of the film.展开更多
Zeolite FSM 16 was synthesized by reconstruction of layered silicate in the presence of organic surfactant. With partial replacement of Ti 3+ with organic cations, TiO 2 nano structured particles were simultaneously b...Zeolite FSM 16 was synthesized by reconstruction of layered silicate in the presence of organic surfactant. With partial replacement of Ti 3+ with organic cations, TiO 2 nano structured particles were simultaneously built in the channel of the zeolite as the framework of the zeolite was formed. XRD, IR and Raman spectroscopic characterizations indicate that SiO 4 tetrahedron may be distorted and transferred from Q 3 to Q 2 form due to the pucker and reconstruction of the layered structure. The formation of TiO 2 nano structured particles had no influence on the formation of zeolite framework, however, the interaction obviously occurred between TiO 2 nano structured particles and zeolite framework.展开更多
文摘The different investigation has been carried out on the biological activities of titanium dioxide nanoparticle but the effect of this nano product on the antibacterial activity of different antibiotics has not been yet demonstrated. In this study the nano size TiO2 is synthesized using citric acid and alpha dextrose and the enhancement effect of TiO2 nanoparticle on the antibacterial activity of different antibiotics was evaluated against Methicillin-resistant Staphylococcus aureus (MRSA). During the present study, different concentrations of nano-scale TiO2 were tested to find out the best concentration that can have the most effective antibacterial property against the MRSA culture. Disk diffusion method was used to determine the antibacterial activity of these antibiotics in the absence and presence of sub inhibitory concentration of TiO2 nano particle. A clinical isolate of MRSA, isolated from Intensive Care Unit (ICU) was used as test strain. In the presence of sub-inhibitory concentration of TiO2 nanoparticle (20 μg/disc) the antibacterial activities of all antibiotics have been increased against test strain with minimum 2 mm to maximum 10mm. The highest increase in inhibitory zone for MRSA was observed against pencillin G and amikacin (each 10 mm). Conversely, in case of nalidixic acid, TiO2 nanoparticle showed a Synergic effect on the antibacterial activity of this antibiotic against test strain. These results signify that the TiO2 nanoparticle potentate the antimicrobial action of beta lactums, cephalosporins, aminoglycosides, glycopeptides, macrolids and lincosamides, tetracycline a possible utilization of nano compound in combination effect against MRSA.
基金funded by The Scientific and Technological Research Council of Turkey-TUBITAK[Grant No.219M522].
文摘In this study,the workability of cement-based grouts containing n-TiO 2 nanoparticles and fly ash has been investigated experimentally.Several characteristic quantities(including,but not limited to,the marsh cone flow time,the mini slump spreading diameter and the plate cohesion meter value)have been measured for different percentages of these additives.The use of fly ash as a mineral additive has been found to result in improvements in terms of workability behavior as expected.Moreover,if nano titanium oxide is also used,an improvement can be obtained regarding the bleeding values for the cement-based grout mixes.Using such experimental data,a multi-layer perceptron artificial neural network model has been developed(5 neurons in the hidden layer of the network model have been developed using a total of 42 experimental data).70%of the data employed in this model have been used for training,15%for validation and 15%for the test phase.The results demonstrate that the artificial neural network model can predict Marsh cone flow time,mini slump spreading diameter and plate cohesion meter values with an average error of 0.15%.
文摘A kind of new nano composite with ultraviolet （UV） ray resistance and high temperature stability was prepared by in-situ polymerization in low temperature. Polysulfonamide （PSA） was synthesized with 4, 4＇-diaminodiphenyl sulfone （DDS） and terephthaloyl chloride （TPC） in the common solvent N, N-Dimethyl- -acetamide （DMAc）. Nano filler is a certain nano titanium oxide modified by silicon oxide （TMS）, which plays the role of UV resistance additives. Properties of the novel composite materials were characterized by Atomic Force microscopy （AFM）, thermal gravimetric Analysis （TGA） and Ultraviolet Spectroscopy. AFM had showed the sizes and distributions of TMS particles in the nanocomposite. Ultraviolet Spectroscopy for the nanocomposites showed a large absorption in UV band. TGA showed the decomposition temperature was increased over ten degrees with 0.5% wt TMS for this nanocomposite compared with pure PSA.
文摘<span style="font-family:Verdana;">The use of wood has been considered for a long time and to this day, it has a special place in human life. Modification of wood and lignocellulosic materials is done by various methods, including modification of physical, mechanical, chemical and thermal, that as a new technology, it leads to the improvement of their undesirable features. Among these methods, heat correction is a useful method to improve dimensional stability and leads to increased resistance to water absorption and decay. The main purpose of this study is to investigate the titanium Nano oxide and heat treatment on the physical properties of hornbeam species. Samples were saturated with titanium Nano oxide solution at a concentration of 5000 ppm and pressurized 7 times in a pressure tank. The samples were divided into three groups: control, heat and Nano thermal treatment. Heat and saturated samples with titanium Nano oxide were heat treated at three temperature levels of 150</span><span style="font-family:""><span style="font-family:Verdana;">℃</span><span style="font-family:Verdana;">, 175</span><span style="font-family:Verdana;">℃</span><span style="font-family:Verdana;"> and 200</span><span style="font-family:Verdana;">℃</span><span style="font-family:Verdana;"> for 4 and 6 hours. All three groups underwent physical tests. Heat and Nano thermal oxide treatments led to reduced water absorption and thickness swelling. Comparison between heat and Nano thermal treatment showed a further decrease in water absorption and thickness swelling in Nano thermal samples.
基金Foundation items: National Natural Science Foundations of China (No.10835004,No.10775031)Science and Technology Commission of Shanghai Municipality,China (No. 10XD1400100)
文摘The hydrophobic films of TixOy-CmHn. deposited from mixture gases of titanium isopropoxide （TTIP） and oxygen by plasma enhanced chemical vapor deposition （PECVD） were investigated. The films were investigated by scanning electron microscope （ SEM ）, transmission electron microscope （ TEM ）, Fourier transform infrared spectrometer （ FTIR）, X-Ray diffraction （ XRD ）, element analysis （ EA ）, ultraviolet visible spectrometer （ UV-Vis）, and water contact angle （WCA）. The results reveal that the surface of the films is formed by mierosized papillaes aggregated by inorganic and organic phases of complex nanoparticles with size from 50 nm to 200 nm when the discharge power is increased from 40 W to 150 W. All fdms demonstrate the strong broad of Ti-O-Ti stretching vibration at 400 -800cm-1, -CH bending vibration at 1 388 cm -1, and broadening -OH stretching vibration at 3 000-3500 cm-1 With the increase of the discharge power, the asdeposited film changes from amorphous to crystallization. The WCA of the film can be as high as 160°, indicating the hydrophobicity. The films show a similar ultraviolet absorption property as the bulk TiO2 film. The composition of the composition of film deposited at 150 W can be formulated as Tio.302-C1.5H3. Therefore, the composition formula of this hydrophobic film could be expressed as TiO2-C5H10O4.7. It is believed that the complex micro/nano structures of TiO2 and C5H10O4.7 residues are responsible for the observed hydrophobicity and the ultraviolet absorption property of the film.
文摘Zeolite FSM 16 was synthesized by reconstruction of layered silicate in the presence of organic surfactant. With partial replacement of Ti 3+ with organic cations, TiO 2 nano structured particles were simultaneously built in the channel of the zeolite as the framework of the zeolite was formed. XRD, IR and Raman spectroscopic characterizations indicate that SiO 4 tetrahedron may be distorted and transferred from Q 3 to Q 2 form due to the pucker and reconstruction of the layered structure. The formation of TiO 2 nano structured particles had no influence on the formation of zeolite framework, however, the interaction obviously occurred between TiO 2 nano structured particles and zeolite framework.
