The phase and morphology transformation during the hydrothermal treating process of Y2O3 was evaluated with X-ray difference (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), particle ...The phase and morphology transformation during the hydrothermal treating process of Y2O3 was evaluated with X-ray difference (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), particle size and specific surface area determination. The results showed that the cubic Y2O3 did not transfer into hexagonal Y(OH)3 in pure water. Therefore, pure hexagonal Y(OH)3 with nanotube and microrod morphologies were obtained by hydrothermal treating Y2O3 at 150 oC for 12 h in 15 ml of 2 mol/L NaOH solution with and without PVA or PEG. It was suggested that the characteristic preferential growth of Y(OH)3 was attributed to the structure anisotropy of hexahedron Y(OH)3. The addition of PVA or PEG could promote the forming process of nanotubes by selective adsorption on different crystal planes, which altered the growth rate along different directions and resulted in the diffusion limit of constructing ions in the center top of rods. Finally, Y(OH)3:Eu and Y2O3:Eu nanotubes were also synthesized by using this method, and their photoluminescence properties were evaluated.展开更多
Y 2O 3: Eu nanocrystals were synthesized by EDTA complexing sol gel process at a relatively low temperature, in which ethylen diamine tetraacetic acid (EDTA) and polyethylene glycol (PEG) were used as the chelat...Y 2O 3: Eu nanocrystals were synthesized by EDTA complexing sol gel process at a relatively low temperature, in which ethylen diamine tetraacetic acid (EDTA) and polyethylene glycol (PEG) were used as the chelating agent and polymerization agent respectively. Formation process of Y 2O 3:Eu and structure characterization were carried out by TG DTA, XRD, SEM/EDX. The results show that pure cubic phase Y 2O 3: Eu nanocrystalsere is produced after the precursor calcinated at 600 ℃ for 2 h, and the crystallinity increases with increasing calcination temperature. The nanoparticles of the Y 2O 3: Eu are basically spherical in shape. The mean particle size increases from about 30 to 70 nm when the calcination temperature increases from 600 to 1000 ℃. The luminescent properties of phosphor were analyzed by measuring the excitation and emission spectra. The main emission peak of the sample is around 612 nm, resulting in a red emission. The emission intensity increases with the calcination temperature. Compared with microsized Y 2O 3: Eu phosphors prepared by a conventional method, nanosized Y 2O 3: Eu synthesized by the present work, gives and a clear red shift in the emission spectrum. Moreover, the quenching concentration of Eu is raised.展开更多
基金Program for Changjiang Scholars and Innovative Research Team in University (IRT0730)Chinese Ministry of Education Foundation for Core Young Teacher at University (GG-430-10403-1970)+1 种基金the Key Project of Department of Science and Technology of Jiangxi ProvinceProject of Education Department of Jiangxi
文摘The phase and morphology transformation during the hydrothermal treating process of Y2O3 was evaluated with X-ray difference (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), particle size and specific surface area determination. The results showed that the cubic Y2O3 did not transfer into hexagonal Y(OH)3 in pure water. Therefore, pure hexagonal Y(OH)3 with nanotube and microrod morphologies were obtained by hydrothermal treating Y2O3 at 150 oC for 12 h in 15 ml of 2 mol/L NaOH solution with and without PVA or PEG. It was suggested that the characteristic preferential growth of Y(OH)3 was attributed to the structure anisotropy of hexahedron Y(OH)3. The addition of PVA or PEG could promote the forming process of nanotubes by selective adsorption on different crystal planes, which altered the growth rate along different directions and resulted in the diffusion limit of constructing ions in the center top of rods. Finally, Y(OH)3:Eu and Y2O3:Eu nanotubes were also synthesized by using this method, and their photoluminescence properties were evaluated.
文摘Y 2O 3: Eu nanocrystals were synthesized by EDTA complexing sol gel process at a relatively low temperature, in which ethylen diamine tetraacetic acid (EDTA) and polyethylene glycol (PEG) were used as the chelating agent and polymerization agent respectively. Formation process of Y 2O 3:Eu and structure characterization were carried out by TG DTA, XRD, SEM/EDX. The results show that pure cubic phase Y 2O 3: Eu nanocrystalsere is produced after the precursor calcinated at 600 ℃ for 2 h, and the crystallinity increases with increasing calcination temperature. The nanoparticles of the Y 2O 3: Eu are basically spherical in shape. The mean particle size increases from about 30 to 70 nm when the calcination temperature increases from 600 to 1000 ℃. The luminescent properties of phosphor were analyzed by measuring the excitation and emission spectra. The main emission peak of the sample is around 612 nm, resulting in a red emission. The emission intensity increases with the calcination temperature. Compared with microsized Y 2O 3: Eu phosphors prepared by a conventional method, nanosized Y 2O 3: Eu synthesized by the present work, gives and a clear red shift in the emission spectrum. Moreover, the quenching concentration of Eu is raised.
